Hello all,
I've come across some CAB files that when launched in WM, will immediately start installing the application to device memory. I've had a look at those CAB files in WinCE CAB Manager and tried comparing them to regular CAB files but cannot find any difference which would enable one CAB file to automatically start installing to device memory.
Any ideas?
--Amr
*Bump* Any ideas?
Related
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try
Rudegar said:
many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try
Click to expand...
Click to collapse
Tried that but no luck. I think this is not what i mean. I would like to turn this exe into a CAB and the key included. So when i install the Cab i don't have to register.
one would think the program maker took precautions to make that impossible otherwise your cab could be distributed as a pretty easy free version
you can try to single out what files it depend
on and make a cab file from cratchs
and if the exe or dll files got alter when the serial was given
that cab would be reg'd
otherwise you would have to find out what registries was altered in the
serial process and make a reg which which did those alterations
and get the cab file to run it
Most installations that require you to install through activesync end up leaving a cab file behind. Check Program Files\Activesync\SPB... for the cab file. If it is not there restart the installation but after you have executed the setup file leave it alone and search for the cab file again. I hope this is what you were looking for
ALL exe that install via activesync have a cab, some are hidden in the profiles temporary files, some auto-delete once installed, so leave the application hanging in the install and do a search for recent files and sort by date/time (remember to allow it to scan hidden and system folders). a lot go into the activesync directory, some go into program files, i have even found some that go into the internet explorer temp files, install, and then delete themselves. The most common hiding place is your computers profile temp folder --- typically found under
C:\Documents and Settings\PROFILE\Local Settings\Temp
just dig around, its not to difficult once you find the 3 most basic hiding places.
good luck.
Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
You can simply download the CAB files from SPB site directly.
Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.
vprabu said:
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.
Click to expand...
Click to collapse
Thank you, this did the trick for me. Installed en included the registration.
Welcome. I am happy that I could be of some help
vprabu said:
Welcome. I am happy that I could be of some help
Click to expand...
Click to collapse
Now i have everything in registered Cab-files on my SD-card. Now i can make the switch to WM6. I'm dutch and have a P3300 and i guess it will take some time before HTC wil come with a dutch WM6 upgrade, so maybe not the place to ask but do you now where i can find a original English WM6 for the P3300?
Hi,
Some programs for Windows Mobile come in .exe and not .CAB. So when I install the .exe on my computer it install the program on my smartphone (htc s730). when when i install the .exe on my computer, many folders (under program file etc.) are created. also shortcuts are created in the start on my computer. all this is really annoying. it trashes my computer.
how can i install .exe programs without all those stupid things installing on my computer? i love CAB but hate EXE
thanks
First look at the homepage of the program. Many software sompanies also releases standalone cab's.
Try extracting files from the exe installer (using WinRAR) and you may get the cab (only works with some installers).
Make a collection of your programs yourselfs. Before the installation of the program on the device is finished, the cab is copied to Windows\AppMgr\Install. So just get it from there.
Okay that's good help-
I thank you moneytoo
I had a program that would let me install .cab files through activesync, the same way we install .exe files
You just draged the cab file on the program, and it would start loading it to the ppc, and a instal popup on the ppc appeared.
I think it was called windowsCE.exe, or something like that, but I cant find it now.
It's called WinCE CAB installer
lol, I was close, anyways, here it is if anyone else is looking for it
http://www.mediafire.com/?0l8lpuolzji
hi all,
heres a silly newb question, i downloaded the TCPMP but have no idea at all of how to get this or any app working, please help, I have copied into the program files directory on hd2 and get nothing happening when opening setup, what am i doing wrong.
thanks Paul.
if it's a cab file don't open it just transfer it to the pda and run it
if it's an exe file then most likely it's an windows install program which should be run on the pc and then it use activesync to transfer the cab file inside it to the pda and then it runs it
in my windows mobile,after clean boot or hard reset certain softwares(.cab) will always get installed,ie after clean boot windows phone start with default settings and suddenly a screen appears saying:"auto config in,3 sec....,2 sec...,1 sec,phone auto restart and these softwares(.cab) can see while installing the .cab filenames undergoing installation is shown, which includes spb mobile shelll 3.5,mms setps,camera and radio softwares,other drivers required to run the device,then restarts,after wards the software in card if placed get installed
but i know how the software in the card got installed ,because i placed autorun config files for installation,if card is removed then this software is not installed,i got how software in the card is installed,because i know the location of the setup files in the cards drive folder
but my question here is from where is the auto configuration .cab files on first case get installed,these files installed on this time is not shown in remove programs in control settings of phone
i know silent installed softwares some times not get listed on remove programs;then how to remove programs that is not listed on it,or any silent installed soft cabs or exes
so from where is these cab file located(.cab),how can i locate all these .cab files,or is it an exe file than can instal cab files,or is it a batch process file,i dont exacty know the auto configuration setup,i searched phone memory for .cab files wit different file explorers like total commander,resco,etc etc,no success,
some how its hidden,or got placed within .zip or auto config.cab files,which i cannot trace,if the orgin of the file is found then how can i extract these files from some other file formats
please help!!!!!!!!!!!!!!!!!