Database Info

[RUU] Official 2.31.651.7 in ZIP Format, Flashable from Fastboot

As the title says, here's the Rom.zip extracted from RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe for those that don't use Windows, or prefer to have their RUU in zip format.
This will flash your phone to 2.31.651.7 STOCK.
http://www.mediafire.com/?m6x4sr682ruk027
Simply rename this to HERCIMG.zip and place on the root of your SDCard.
Power your phone completely off.
Press and Hold VOL DOWN and POWER until your phone boots into HBoot mode.
Wait for it to verify the zip, then click <ACTION> (Trackball) to update, or <SEND> (Green Call) to cancel.
Enjoy!
Here's my guide to rooting .7:
http://forum.xda-developers.com/showthread.php?t=804296

Personally..I want to say THANK YOU, THANK YOU, THANK YOU.
I have spent the last four hours searching for this. This needs to be stickied. I'm bookmarking it for sure. This got my phone unbricked..I thought all hope was lost and I would have to call in for warranty support (I got mine refurbed through Sprint last October..so I don't even know if I would still have any warranty support), and see if I could try my luck and getting it replaced, since that is what others have said to do as apparently this file from OP, did not exist.
And so for future reference, so that others don't go mindlessly searching through the forums.
If you
a.) Managed to overwrite your Recovery some how or completely delete it. (I did..and from searching this and many other forums over the past couple hours..I can see I wasn't the only one), and also have no boot (or a corrupted boot loop)
b.) Still have S-ON (You can find this out by powering off your phone and then pressing and holding the power button and the lower volume button), I recommend you turn S-Off for future reference if you're going to be dealing with customer ROMs a lot (so you don't have to go through the hell I just did..). See here..
http://forum.xda-developers.com/showthread.php?t=759955
c.) Have an updated Hboot (1.47) (you can also find this info. in part b.)
....then you KNOW that you are stuck. Because you
a.) Cannot flash a ROM in Recovery because you cannot access it.
b.) You cannot access ADB because your phone won't go that far and will only go into fastboot..
c.) But even though you have access to fastboot you can't do ANYTHING like flash a recovery image or a ROM..or anything for that matter..because S is still ON. (this is the "not allow" messages you will see pop up.)
d.) You have bootloader 1.47 so if you for example, were like me couldn't use this file here.. (http://forum.xda-developers.com/showthread.php?t=657086), because it would say there was a newer version and wouldn't install it.
So this file right here..was the only thing getting my phone back to a usable state. And considering that my searches have shown to pretty much give up all hope and have it sent it for warranty repair, then I think this thread deserves a bump for all those that have screwed up.
Yeah..I have to start ALL OVER now from a stock ROM (thank god for nandroid), but at least my phone isn't a dead brick.
Just thought this needed a well deserved bump.

I wonder if there is a RUU for the latest .2?

Wanted to say BIG THANKS. This worked like a charm to update prl/profile. Keeping two copies of this one on the sd and on the laptop. Thanks again.
Yea it's me Again. With the
Modified .HERO.

laie1472 said:
Wanted to say BIG THANKS. This worked like a charm to update prl/profile. Keeping two copies of this one on the sd and on the laptop. Thanks again.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
Forgive me for seeming NOOBish... but I can use this to do the same, then restore Nandroid back and it will keep the PRL/Profile update?
Just wondering... lolz, thanks!

Yup But you will have to reroot. This takes root from you. You will have to reroot with the Hero rooter from Reg or Z4 or one click root. But read read read. And as far as the prl/profile yup it will stick. When your phone boots up after running this just go into settings and updates and choose update profile and update prl don't update firmware. I repeat don't update firmware. After that just reboot and check your prl should be 60675. After that reroot, then flash a recovery and then nand restore. Hope this helps good luck
Remember this returns you to stock you will loose root and recovery..
Yea it's me Again. With the
Modified .HERO.

Why don't you guys just flash NFX's or LS's already rooted and way faster stock sense ROM to update PRL, etc?
Running stock ROM has to be one of the worst things ever after being on custom ROMs for so long.

I tried flashing almost ever sense rom on here pmgrands port, ninfintes stock odex and deodex and his apps 2 sd builds he has like 4 or 6 different builds. Tried flashing liquids builds beta and stable. All gave me a error. So I had to use this. I couldn't flash any sense rom
and it was easier to use this than try to figure out y. If he can flash a sense rom then yea that's the easier way but if not this is a for sure way to get back to stock.
Yea it's me Again. With the
Modified .HERO.

laie1472 said:
I tried flashing almost ever sense rom on here pmgrands port, ninfintes stock odex and deodex and his apps 2 sd builds he has like 4 or 6 different builds. Tried flashing liquids builds beta and stable. All gave me a error. So I had to use this. I couldn't flash any sense rom
and it was easier to use this than try to figure out y. If he can flash a sense rom then yea that's the easier way but if not this is a for sure way to get back to stock.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
I still have my original nandroid from before I flashed any ROMs and it takes me back to stock Sprint, where I do my updating. Is this faster than that?

jckeyser said:
I still have my original nandroid from before I flashed any ROMs and it takes me back to stock Sprint, where I do my updating. Is this faster than that?
Click to expand...
Click to collapse
Yup. That's way better and faster. Just go into settings / updates. Then just update prl and profile. Don't update firmware. After you confirm that your updated just nand restore and you should be good.
Edit not sure if you would have to reroot.
Yea it's me Again. With the
Modified .HERO.

Thanks for the reply's all... I like Sense and have NFX rom on my Hero, loaded a few ROMS but they won't update, so no worries, when I have some free time I'll sit and do it then. I don't like the one click rooters nor the clockwork recovery, I guess I'm old school and do it the hard way, lol, but thanks for letting me know it'll work (prl update) and stay on the handset!
Regards!

Without opening a huge can of worms I would like to know whats the best newest rom out there with sense I just searched for like 3 hours and lot of threads are old and I want what ever is new with sense also would like to upgrade to 2.2 im on Honeybun v.-2 lite firmware 2.1 update1

Gelladuga69 said:
Why don't you guys just flash NFX's or LS's already rooted and way faster stock sense ROM to update PRL, etc?
Running stock ROM has to be one of the worst things ever after being on custom ROMs for so long.
Click to expand...
Click to collapse
you got a link ? Im searching now

laie1472 said:
Yup. That's way better and faster. Just go into settings / updates. Then just update prl and profile. Don't update firmware. After you confirm that your updated just nand restore and you should be good.
Edit not sure if you would have to reroot.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
No need to reroot because it was a nandroid. Can't make a nandroid if you're not rooted.
Sent from my HTC Hero CDMA running Android 2.3

Does anybody have the original MD5 checksum for this file? I wanna make sure this file downloaded properly. Thanks in advance!
EDIT: efa439da700b5fad7ea49915ef7d2866
Sent from my HTC Hero CDMA running Android 2.3

does this work with any version of HBOOT? The phone I am dealing with has stock 1.5

mrtimo said:
does this work with any version of HBOOT? The phone I am dealing with has stock 1.5
Click to expand...
Click to collapse
What? Is your phone even rooted? Sprint upgraded to 2.1 a LONG time ago, the update is available at www.htc.com

It worked for me a while ago, but my dad just got a new hero so I tried using this, and it wouldn't recognize the image file.. any thoughts?

systemshock869 said:
It worked for me a while ago, but my dad just got a new hero so I tried using this, and it wouldn't recognize the image file.. any thoughts?
Click to expand...
Click to collapse
yeah, this only works if he has an S-off bootloader, which he doesn't have if it's a new hero.

il Duce said:
yeah, this only works if he has an S-off bootloader, which he doesn't have if it's a new hero.
Click to expand...
Click to collapse
According to the OP this one was extracted from the RUU, so it *should* work S-ON.

*Unroot 2.2* 3.29.651.5 10/20/10

Ok, this worked for me as of 10/20/10, i had my phone rooted by unrevoked, I am like many of the people here who kept having issues with all the PC36IMG.zip not working. I have extracted a new PC36IMG.zip from the ruu's and have not had any issues. I also had the dreaded "main version is older" issue. This seemed to take care of the issue! Im now back to stock!
Step 1 you will need to go here:
http://downloads.unrevoked.com/forever/current/unrevoked-forever-son.zip
If you used Unrevoked Forever at any time, flash unrevoked-forever-son.zip from recovery until hboot shows S-ON(Credit to djR3Z tut)
Step 2
http://www.megaupload.com/?d=108Z9R8Y
This is the PC36IMG.zip file that you will need
- Put this on the root of your sdcard
- Boot into hboot and let it load up the PC36IMG.zip
- It will run like a normal update
- Reboot when finished
- It will do a few other things (Load radio and update)
- After it fully loads you should be back to complete stock!!!!
Lemme know if this doesn't work for you
LIKE I SAID THIS WORKED AS OF 10/20/2010!!!
I am not responsible for damages to your phone! You chose to go the route you did, so face the consequences, I'm just posting what has worked for me, so use at your own risk! Love the android, love my evo!

Has been tested and works if you have a rooted via unrevoked method.

So can I update my evo ota to 3.29.651.5 and then follow these steps? Right now I have the stock 3.26.651.6 rooted with unrevoked3. TIA

m4f1050 said:
So can I update my evo ota to 3.29.651.5 and then follow these steps? Right now I have the stock 3.26.651.6 rooted with unrevoked3. TIA
Click to expand...
Click to collapse
Im not understanding? If you apply just the PC36IMG you should at least lose root and be updated to latest update. You have to run the first tool to relock the bootloader. You will see in hboot if it is locked or unlocked. Locked is s- on unlocked is s- off

My bad, I was wanting to root or better yet, update to 29 and then root.
Sent from my PC36100 using XDA App

yes you can achieve root on the new update through unrevoked. I'm not a fan of rooting this way, as people have had lots of trouble unrooting (had this problem myself). Thats why I came up with this tut so you can unroot if you have to send back to sprint. my method was the only one that worked for me to get unrooted.

people...just use unrevoked 3...i mean its a one click process...u dont have to do anything after that in about 2 minutes your rooted and nand unlocked =P

m4f1050 said:
So can I update my evo ota to 3.29.651.5 and then follow these steps? Right now I have the stock 3.26.651.6 rooted with unrevoked3. TIA
Click to expand...
Click to collapse
Just flash a ROM that's based on the 3.29 update.

Well hopefully this works. I'm not going to root with unrevoked again I don't think. It was much easier for me to unroot my last phone w/o using unrevoked.
Nope, as of 1/19/11 this does not work.

Will this work if I didn't use unrevoked? I am currently having an issue where my usb/charging port is not working properly and can not connect to the computer. I am rooted but need to unroot so I can send my phone back.

Diplomat2387 said:
Will this work if I didn't use unrevoked? I am currently having an issue where my usb/charging port is not working properly and can not connect to the computer. I am rooted but need to unroot so I can send my phone back.
Click to expand...
Click to collapse
This is incredibly outdated, so no, it will not currently work with your phone.

dkelle4 said:
This is incredibly outdated, so no, it will not currently work with your phone.
Click to expand...
Click to collapse
Even if I downgraded my ROM?..I am currently on a 2.1 ROM..

Only one way to find out. It SHOULD. I ended up downloading one of the early official 2.2 releases and flashed that on my phone. Of course now it won't do another OTA because the "signatures are invalid".

dkelle4 said:
This is incredibly outdated, so no, it will not currently work with your phone.
Click to expand...
Click to collapse
I haven't seen any "unroot" threads that have worked for me. Is there one I'm missing?

jpitt916 said:
Only one way to find out. It SHOULD. I ended up downloading one of the early official 2.2 releases and flashed that on my phone. Of course now it won't do another OTA because the "signatures are invalid".
Click to expand...
Click to collapse
I tried just putting the pcimg on my sd card and power up into bootloader and it gives me an error saying that the image is older or something...Agh.

[HOW-TO] ROOT TMOUS OTA 2.3.4 (if you lost root)

For those that lost root due to the TMOUS OTA 2.3.4 update, here's how I got it back.
When i updated, I had to install the stock recovery for the update to take affect. When I reverted back to stock recovery, the update flashed. I wiped my device, however, and thought that I'd be able to keep root and use Titanium. I was wrong, so here's how I fixed it:
Requirements (mostly just reminders not really telling you what to do here....)
1. S-OFF prior to updating
2. Stock Recovery to process the update
3. Disable Fastboot (Settings > Power > Fastboot)
Regain Root on 2.3.4 OTA Update
1. Download the HBoot CWM Recovery and SU flash able ZIP file from here:
http://forum.xda-developers.com/showthread.php?t=1192300
2. Place the HBoot CWM Recovery file on the root of your sdcard (i.e.. sdcard/)
3. Power off device
4. Go into HBoot (Vol Down + Power)
5. Flash the CWM Recovery image
6. Reboot
7. Delete the CWM Recovery file off of your sd card
8. Power off
9. Reboot into Recovery (can be selected through HBoot if easier)
10. Choose the SU Root ZIP file that you downloaded in step 1 and flash it
11. Reboot, you're rooted with CWM Recovery again
This method work perfectly for me. I imagine anyone who did the OTA Update and has Rooted their phone would know they went to Stock recovery to apply the update or were always on it.

Thank you for the guide

Noobish question, how did you remove CWM and go back to stock recovery? Perhaps you should add this to the OP.

I was just gonna write this up. Oh well. THANX! I'd press your thanx button but I used them all up already. Maybe a beer?
EDIT: Can you please write up a how-to for going from whatever anyone is on to TMOUS Stock 1.45.531.1 + CWM + Root ? I believe it would be really helpful and I am just too lazy to do it myself

WARNING After installing the OTA, the bootloader now says in pink on the very top
******LOCKED*******
Also, Fastboot flash commands don't work (trying to flash splash image)
HBOOT is now: 1.18.0000
Re-running Revolutionary fixes it. and extended Fastboot commands work again.
And brings it back to 1.17.1111

if someone made a nandroid backup of the ota rooted thru cwm couldnt you just load that instead using the restore option?

As always gents.... Just a tiny tiny bit of patience will go a long way.
If your already rooted through Revolutionary, there is zero need to flash any official FOTA. Not sure why some people seem to want to try it out when they're already rooted? It's NO different than the Euro 2.3.4 OTA. Peeps all over these forums and the web are saying the same thing....no change.
Actually worse if you count the fact that heavy graphically intense games crash now as they do with all stock kernel 2.3.4 Euro ROMs.
Rooted versions of the Tmous 2.3.4 FOTA are already rolling out (birgertime I believe has one out). Give it a day and there will be more that are heavily customized like the ones from Baadz, Lee, Mike etc
It's easy to understand why people want to install the latest official firmware...but if you're rooted and or want to be....there is no need to ever go through official channels (HTC/Tmo) to get your updates.
Just for the people who might be unclear. To everyone else... carry on

Hoggles said:
As always gents.... Just a tiny tiny bit of patience will go a long way.
If your already rooted through Revolutionary, there is zero need to flash any official FOTA. Not sure why some people seem to want to try it out when they're already rooted? It's NO different than the Euro 2.3.4 OTA. Peeps all over these forums and the web are saying the same thing....no change.
Actually worse if you count the fact that heavy graphically intense games crash now as they do with all stock kernel 2.3.4 Euro ROMs.
Rooted versions of the Tmous 2.3.4 FOTA are already rolling out (birgertime I believe has one out). Give it a day and there will be more that are heavily customized like the ones from Baadz, Lee, Mike etc
It's easy to understand why people want to install the latest official firmware...but if you're rooted and or want to be....there is no need to ever go through official channels (HTC/Tmo) to get your updates.
Just for the people who might be unclear. To everyone else... carry on
Click to expand...
Click to collapse
exactly what i said and what i was thinking. my brother in law & friend aren't rooted yet so they could go for the OTA but my fiancé and I are rooted. I have to make sure she doesn't install the update. i have no desire to root her sensation again. lol - for me, i'll be downloading the euro ota

EmceeGeek said:
exactly what i said and what i was thinking. my brother in law & friend aren't rooted yet so they could go for the OTA but my fiancé and I are rooted. I have to make sure she doesn't install the update. i have no desire to root her sensation again. lol - for me, i'll be downloading the euro ota
Click to expand...
Click to collapse
Keep one thing in mind though... Your brother in-law & friend should realize that if they do ever one day want to root, they should stay far away from any official HTC updates. HTC will make them agree to an online waiver that will void many parts of their warranty if they choose to use HTC's online unlocker.
If they ever plan on rooting, they should go through Revolutionary....simply because it's the best of both worlds. You can have root, HTC/Tmo will never know.... and you can now get S-ON back after Revolutionary for warranty repairs and such

Quick question. I just got my sensation replaced with a new one(previous one had problems) and it came with 2.3.4 can I still get s-off and root?
Sent from my HTC Sensation 4G using XDA App

nxt said:
WARNING After installing the OTA, the bootloader now says in pink on the very top
******LOCKED*******
Also, Fastboot flash commands don't work (trying to flash splash image)
HBOOT is now: 1.18.0000
Re-running Revolutionary fixes it. and extended Fastboot commands work again.
And brings it back to 1.17.1111
Click to expand...
Click to collapse
Thanks, I was wondering why this happened.

Nightfall983 said:
Quick question. I just got my sensation replaced with a new one(previous one had problems) and it came with 2.3.4 can I still get s-off and root?
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
Yes Revolutionary works just fine, make sure you download the latest version from http://revolutionary.io/

nxt said:
Yes Revolutionary works just fine, make sure you download the latest version from http://revolutionary.io/
Click to expand...
Click to collapse
Thanks, I'll root it now
Sent from my HTC Sensation 4G using XDA App

[RUU]RUU_SuperSonic_GB_Sprint_WWE_4.54.651.1_Radio_2.15 .00.0808_NV_2.15

Here the latest shipped RUU for SuperSonic
http://www.filefactory.com/file/cfe....15.00.0808_NV_2.15_release_220182_signed.exe
Enjoy!

As always, thanks
Sent from my PC36100 using xda premium

Nice! But just curious. How do you use this? Of all the things I know about rooting and whatnot this is the only thing I'm stumped on...
Sent from my PC36100 using XDA App

You run it on your pc. It returns your phone to stock
We're comin from a pure power source.

Football said:
Here the latest shipped RUU for SuperSonic
http://www.filefactory.com/file/cfe....15.00.0808_NV_2.15_release_220182_signed.exe
Enjoy!
Click to expand...
Click to collapse
Thank you Sir!

as always, thank you!!

exactly what I needed for my newly purchased evo 4G, big thanks!

I keep getting Error 170 when trying to run this... Running Win7 x64. Is there anything special I need to do to get this to work?

Drakhar said:
I keep getting Error 170 when trying to run this... Running Win7 x64. Is there anything special I need to do to get this to work?
Click to expand...
Click to collapse
That's what I am wondering. Every other RUU he uploaded were zip files that you just flashed through HBoot & this one is a exe file. How do you use this? This is a non-Rooted Rom right?

Drakhar said:
I keep getting Error 170 when trying to run this... Running Win7 x64. Is there anything special I need to do to get this to work?
Click to expand...
Click to collapse
Don't know exactly where you coming from and going to, 4.53 to 4.54? But something and that has been working and continued for me.
This ruu.exe is ran from the PC through usb debugging enabled, and having the correct drivers installed, I am on xp so I ran latest drivers maually, for higher o/s ver. its going to regonized the android and try to install autmatically....press stop/cancel you will need to configure it manually to have it install the correct drivers.
assuming you done this already, then enable settings>applic>develop>usb-deb and device powered on to home screen, from pc just double click the .exe and go through simple menu's and continue to process.
good luck and hope it helps..
latest Drivers
RUU4.54

Thank football!!!!

Anybody checked if stagefright libs were updated by HTC?

I have a custom slash screen on my EVO, will this put back on the oem Sprint one back on it? I just bought a E3D and am selling my EVO.

doeboy1984 said:
I have a custom slash screen on my EVO, will this put back on the oem Sprint one back on it? I just bought a E3D and am selling my EVO.
Click to expand...
Click to collapse
it should!!!

brad
my dilemma is that I have a rooted evo running a synergy rom on Hboot .79 and Radio 1.39
thing is that the s status is S-ON on this particular phone and unrevoked forever does not work on that radio version.
I've tried to upgrade the radio through clockwork recovery with the prepackaged zip yet when I reboot the phone still shows the old radio version.
I've tried installing an RUU from the PC but they all error out.
I'm looking for an RUU packaged in an install-able .zip that includes updated Radios Kernels Hboot and ROM in one. Is that even possible so i can fix this phone and get it some updated radios?!

brad560 said:
it should!!!
Click to expand...
Click to collapse
So I know you say it "should" but I don't want to RUU and then still have my batman logo as my splash screen, that would suck. I would ave to re-root it to try and find a splash .img, but I guess I will try it out and see if it works.

skunkd said:
brad
my dilemma is that I have a rooted evo running a synergy rom on Hboot .79 and Radio 1.39
thing is that the s status is S-ON on this particular phone and unrevoked forever does not work on that radio version.
I've tried to upgrade the radio through clockwork recovery with the prepackaged zip yet when I reboot the phone still shows the old radio version.
I've tried installing an RUU from the PC but they all error out.
I'm looking for an RUU packaged in an install-able .zip that includes updated Radios Kernels Hboot and ROM in one. Is that even possible so i can fix this phone and get it some updated radios?!
Click to expand...
Click to collapse
just saw you replied to me, sorry for the lateness. first of all, i would try aman ra for recovery, as many users have had problems with clockwork. as far as the ruu, how can you be s-on and still be rooted?

brad560 said:
just saw you replied to me, sorry for the lateness. first of all, i would try aman ra for recovery, as many users have had problems with clockwork. as far as the ruu, how can you be s-on and still be rooted?
Click to expand...
Click to collapse
I have the opposite issue. I have S-OFF (Revolutionary) but on stock unrooted (brought the phone to Sprint for a broken power button, and they ended up not fixing it, but flashed 4.53 stock rooted).
How the hell do I get this ROM rooted since Revolutionary doesn't want to root it because the bootloader is unlocked and I can't go to recovery because once I'm on the HTC white background fastboot screen, the volume button are locked and my power button is dead anyway...
I'm trying this Ruu .exe hoping it will give me S-ON but I'm doubtful it will happen...
EDIT: Just as I thought, I'm now on stock rooted 4.54 with S-OFF. And no power button

doeboy1984 said:
So I know you say it "should" but I don't want to RUU and then still have my batman logo as my splash screen, that would suck. I would ave to re-root it to try and find a splash .img, but I guess I will try it out and see if it works.
Click to expand...
Click to collapse
They will always update the splash screen, it helps to identify the firmware and rom versions at a glance. During install the setup program will create a temp folder with PC36IMG.zip or update.zip look in this zip file and you should see a splash.img file or something like that (sorry haven't looked HTC updates since my Hero Days).
Sent from my PC36100 using xda premium

Any way to get this to be able to install through the bootloader because my usb port is broken on my phone and it won't stay connected to the computer and I need to get Unrooted, s-off, return to stock, stock hboot because I need to take my phone to Sprint to get phone replaced/fixed. Thanks.
Sent from my PC36100 using xda premium

XT926 Razr Maxx HD rooted but locked HELP

Hey everyone so i have a XT926
System version 9.18.79.XT926.Verizon.en.US
Android version 4.1.2
Build 9.8.1Q-79
Boot Mode 10.9B
AP Fastboot flash (device is locked status code 0
So about 6 months ago i tried to root and unlock phone, i rooted fine but messed up on the unlock. And the phone was stuck in boot loop. anyways i was able with help from here on XDA get it out of boot loop and working. My issue is a couple things.
1. Can it be unlocked (i have read and read and dont believe its possible)
2. It wont do a factory hard reset it errors out and just reboots.
3. I try to do the OTA and it just get the android guy with the red triangle and then reboots.
4. when i hold volume up and power and get the factory reset, normal boot etc options, any i select just reboot phone.
I would like to do 1 of the following things. and would prefer 1.:
1. if possible unlock and install custom rom.
2. Do the OTA update and have a fresh install
3. Do a factory wipe and sell phone.
Please any help would be great, as the phone has gotten super slow and i usualy like to do a factory reset every 4-5 months to wipe it.
thanks

#1= not possible on your build. you can only install safestrap roms which are limited and most commonly found over on razr forum.
to clean it up and go back to stock you could either, use rsd to reflash stock, or grab the one click utility from the dev forum to do the same. the one click utility is the easiest of the 2, just be sure to get the build that matches your system version or newer. you can flash the same version or newer only, trying to flash an older version will just result in a boot loop.

bweN diorD said:
#1= not possible on your build. you can only install safestrap roms which are limited and most commonly found over on razr forum.
to clean it up and go back to stock you could either, use rsd to reflash stock, or grab the one click utility from the dev forum to do the same. the one click utility is the easiest of the 2, just be sure to get the build that matches your system version or newer. you can flash the same version or newer only, trying to flash an older version will just result in a boot loop.
Click to expand...
Click to collapse
Are you talking about DROID RAZR HD Utility 1.21 - Windows/Mac/Linux

soloblazer said:
Are you talking about DROID RAZR HD Utility 1.21 - Windows/Mac/Linux
Click to expand...
Click to collapse
for your build you would need version 1.33 found here http://forum.xda-developers.com/showpost.php?p=46269380&postcount=1
1.21 would bootloop because of the locked bootloader.

bweN diorD said:
for your build you would need version 1.33 found here http://forum.xda-developers.com/showpost.php?p=46269380&postcount=1
1.21 would bootloop because of the locked bootloader.
Click to expand...
Click to collapse
Ok, i will give it a shot in the morning after full battery charge, i will let you know,,
thanks for your help.

bweN diorD said:
for your build you would need version 1.33 found here http://forum.xda-developers.com/showpost.php?p=46269380&postcount=1
1.21 would bootloop because of the locked bootloader.
Click to expand...
Click to collapse
Everything went smooth with the #1 option and doing a factory reset etc.
thanks for your help.

soloblazer said:
Everything went smooth with the #1 option and doing a factory reset etc.
thanks for your help.
Click to expand...
Click to collapse
happy to help, glad you got it fixed.

Hi, I have a question.
I had a hard time getting any of the utilities to work initially. Booting up was just scrambled and broken. Anyway, I used v1.34 and it's made progress. It worked it's way through writing system and such. Now the phone is stuck on a bootloop. The phone cannot make it passed the red M before rebooting.
When the phone is plugged in and on an inescapable bootloop, is it charging? My battery was hovering above empty before the v1.34 utility brought me here.

soloblazer said:
Everything went smooth with the #1 option and doing a factory reset etc.
thanks for your help.
Click to expand...
Click to collapse
So now that the OTA for kitkat is out, i tried to do it and it fails now. what do you suggest to get the newest OTA with kitkat?
thanks

soloblazer said:
So now that the OTA for kitkat is out, i tried to do it and it fails now. what do you suggest to get the newest OTA with kitkat?
thanks
Click to expand...
Click to collapse
Are you rooted? If so, that is why.
Did you freeze or remove any apps? If so, that's another reason why.
In either case, you will have to FXZ back to stock, unrooted to take the OTA. However, you WILL lose root and there is no root exploit for Kit Kat unless you have an unlocked bootloader, which you already found out you can't have based on the version your phone was at (9.18.X). And, there is NO way to carry root over the OTA. Voodoo doesn't work with Kit Kat at all, and there is just no other way to keep root on locked bootloaders, period.
So, either hold off on the Kit Kat update and pray someone finds a way to root it for locked bootloaders, or else if you can't wait, then realize you may never see root on this phone again.

iBolski said:
Are you rooted? If so, that is why.
Did you freeze or remove any apps? If so, that's another reason why.
In either case, you will have to FXZ back to stock, unrooted to take the OTA. However, you WILL lose root and there is no root exploit for Kit Kat unless you have an unlocked bootloader, which you already found out you can't have based on the version your phone was at (9.18.X). And, there is NO way to carry root over the OTA. Voodoo doesn't work with Kit Kat at all, and there is just no other way to keep root on locked bootloaders, period.
So, either hold off on the Kit Kat update and pray someone finds a way to root it for locked bootloaders, or else if you can't wait, then realize you may never see root on this phone again.
Click to expand...
Click to collapse
I am the one that started this thread, and i used DROID RAZR HD Utility to get my phone updated via the last update. i have not frooze or removed any of the stock apps. and i dont think i am still rooted. I dont care about having root anymore, so just would like to flash the newest OTA>

iBolski said:
Are you rooted? If so, that is why.
Did you freeze or remove any apps? If so, that's another reason why.
In either case, you will have to FXZ back to stock, unrooted to take the OTA. However, you WILL lose root and there is no root exploit for Kit Kat unless you have an unlocked bootloader, which you already found out you can't have based on the version your phone was at (9.18.X). And, there is NO way to carry root over the OTA. Voodoo doesn't work with Kit Kat at all, and there is just no other way to keep root on locked bootloaders, period.
So, either hold off on the Kit Kat update and pray someone finds a way to root it for locked bootloaders, or else if you can't wait, then realize you may never see root on this phone again.
Click to expand...
Click to collapse
I am the one that started this thread, and i used DROID RAZR HD Utility to get my phone updated via the last update. i have not frooze or removed any of the stock apps. and i dont think i am still rooted. I dont care about having root anymore, so just would like to flash the newest OTA>

soloblazer said:
I am the one that started this thread, and i used DROID RAZR HD Utility to get my phone updated via the last update. i have not frooze or removed any of the stock apps. and i dont think i am still rooted. I dont care about having root anymore, so just would like to flash the newest OTA>
Click to expand...
Click to collapse
My bad for not realizing that.
Are you still getting the dead Andy screen after applying the OTA? If so, then you need to go back into the recovery as you did before and then apply the OTA again. This is a two-step process, especially if you applied the OTA manually rather than taking it automatically.
It's still waiting to continue the update for the OTA. So, go back into recovery and navigate to where you stored the OTA zip file on your external SD card and then apply it again and you should be good to go.

iBolski said:
My bad for not realizing that.
Are you still getting the dead Andy screen after applying the OTA? If so, then you need to go back into the recovery as you did before and then apply the OTA again. This is a two-step process, especially if you applied the OTA manually rather than taking it automatically.
It's still waiting to continue the update for the OTA. So, go back into recovery and navigate to where you stored the OTA zip file on your external SD card and then apply it again and you should be good to go.
Click to expand...
Click to collapse
So just to be clear.
I go to settings/aboutphone/system update. It says checking for update. Update Available/ then i hit download, it downloads it. I click install now. Phone reboots and i see the android man, status bar starts going and gets about 1/3 the way and then get the red triangle in the stomach of the android man. and then phone reboots.

soloblazer said:
So just to be clear.
I go to settings/aboutphone/system update. It says checking for update. Update Available/ then i hit download, it downloads it. I click install now. Phone reboots and i see the android man, status bar starts going and gets about 1/3 the way and then get the red triangle in the stomach of the android man. and then phone reboots.
Click to expand...
Click to collapse
At that point when it reboots, it should continue on and you should see the android picture again as it continues on installing. This is the second stage of the install and can take up to 15 minutes to complete.
Are you saying it just keeps rebooting at that point and never completes? If so, then you need to go here and follow SamuriHL's directions to the letter to get you up and running -> http://www.droidrzr.com/index.php/topic/45494-how-to-xt926-upgrade-to-kitkat-ota/

iBolski said:
At that point when it reboots, it should continue on and you should see the android picture again as it continues on installing. This is the second stage of the install and can take up to 15 minutes to complete.
Are you saying it just keeps rebooting at that point and never completes? If so, then you need to go here and follow SamuriHL's directions to the letter to get you up and running -> http://www.droidrzr.com/index.php/topic/45494-how-to-xt926-upgrade-to-kitkat-ota/
Click to expand...
Click to collapse
No after the android guy with the red triangle, it just does a complete reboot back into android. and then says update failed.

soloblazer said:
No after the android guy with the red triangle, it just does a complete reboot back into android. and then says update failed.
Click to expand...
Click to collapse
Were you rooted at any point in time? If so, did you flash back to stock? Just uninstalling root will not work.
Your phone must be completely stock with no evidence of it being modified in order for the OTA to work. Rooting is one thing that will modify it to where an OTA will not take.
I had explained earlier that if you rooted and/or froze/removed any system/stock apps, you must use an FXZ image to put your phone back to stock. The link I supplied you with in that previous post will give you a stock Kit Kat image to flash to your phone. That is what you must do.

soloblazer said:
So now that the OTA for kitkat is out, i tried to do it and it fails now. what do you suggest to get the newest OTA with kitkat?
thanks
Click to expand...
Click to collapse
the razr utility has been updated since you started this thread, to KK.
just go back to the utility post from before, and you will see the new KK version at the bottom.
use it the same way you used the old one and you will be on stock KK. its the same as taking the ota update.

Hi there:
I've been following this thread, as I'm in a similar situation. I'm pretty sure I'm stuck with either rooted JB or unrooted KK, but just wanted to confirm.
Here's what I have:
-Phone: Razr HD
-System version: 9.18.94.XT926 (VZW US)
-Android: 4.1.2
-Rooted
-Locked bootloader
I'd love some clarifications/confirmations on the following, if anyone has them:
-There is no way to downgrade the system version to an unlockable version (like 9.16). Not even with flashing back to stock everything with the Droid Razr HD Utility.
-There is currently no way to root KK without an unlocked bootloader.
-If I unroot (flash back to stock) and upgrade, I will lose root and likely not get it back.
-The only way for me to currently keep root is to stay on JB.
I'm not interested in custom ROMs, just root.
Thanks in advance.

phraxen said:
Hi there:
I've been following this thread, as I'm in a similar situation. I'm pretty sure I'm stuck with either rooted JB or unrooted KK, but just wanted to confirm.
Here's what I have:
-Phone: Razr HD
-System version: 9.18.94.XT926 (VZW US)
-Android: 4.1.2
-Rooted
-Locked bootloader
I'd love some clarifications/confirmations on the following, if anyone has them:
-There is no way to downgrade the system version to an unlockable version (like 9.16). Not even with flashing back to stock everything with the Droid Razr HD Utility.
-There is currently no way to root KK without an unlocked bootloader.
-If I unroot (flash back to stock) and upgrade, I will lose root and likely not get it back.
-The only way for me to currently keep root is to stay on JB.
I'm not interested in custom ROMs, just root.
Thanks in advance.
Click to expand...
Click to collapse
-no, cant be done
-correct
-correct
-correct