Database Info

help with a possibly bricked phone?????

i am hoping i did not brick my phone, but i can not seem to get it working again, i have read through a few threads, and some of them seem to say that it is not bricked if you can enter the 3 color boot loader screen.
i have an AT&T fuze, i have flashed energy's roms many times and was just trying to flash the most recent cookie rom. about 79% through the flash i get a connection error and the progress stops and stays at 79% for a while before i try the recovery options, none of them worked.
I keep getting the same connection error. if i remove and reinsert the battery and power on, it takes me to the 3 color boot loader. at the bottom of the green part it says " upgrade ROM code error Please try again". in the white part it says serial, but changes to USB when I plug it in tho the computer.
i tried booting the rom from the SD card, but that didn't work either. I've tried with several different roms that i know i flashed successfully in the past, but those haven't worked either. when i tried to flash via the SD card i get a breif flash of the gray screen and a message that said "no rom image found" before returning to the bootloader screen.
After posting about this in another thread, someone suggested to try task 29.
I tried that followed all the instructions, and now when i boot up, it boots to a splash screen like it says, but i still get the same error when i try to flash from the sd and i still can not get a connection to the pc to flash. whenever i connect, the bootloader screen indicates a usb connection, but when i run the rom update utility i still get the connection error.
The thing that is even more confusing to me is that i was able to make the connection to the phone in order to run the task 29, but not for anything eles.
ALSO, one thing i noticed was that when a connection was made to the computer, the computer would make a sound indicaing a connection, but a couple of times i would get an indication in the bottom right corner that the drivers were not installed. maybe that is an issue that could be fixed.
if anyone can help or point me in the right direction i would appreciate it a lot.
I have tried to include as much info as needed here, but if more detailed info is needed, let me know
thanks in advance
keith

[Q] Unable to factory reset

Yesterday my phone started acting up. All running process crashed and not many was able to start. I had to constantly click "force close". I think this started after I installed the Google+ app, but not sure.
I have tried uninstalling all unnecessary apps, without luck. I then tried wiping to factory settings by using the Android menu, but without any changing. I then tried by holding vol+ and power, going in to recovery and wiping both to factory and app cache. This doesn't change anything either. By googling I can see some suggests to hold vol- and power, to get to a another wiping-functionality but this just boots my Nexus S to normal state - no menu appears.
Has anybody an idea of what I can do?
Edit: more info; if I click "Report" and investigate the message sent to Google, I see that error has something to do with SQLite-relatet classes. Which makes some sense, alot of my changes are reset each time the phone is rebooted. For instance did I miss a call a couple of hours before the phone went crazy - this is shown at each boot in the notification area eventhough I clear the area and/or goes to missed call section

Factory reset via menu does delete all your "custom" apps, so I'd say it's not one of the existing apps causing problems.
The way you describe function after your factory reset sounds like factory reset didn't work properly.
If you feel safe I'd recommend rather flashing 2.3.4 again using either Odin or the OTA zip from Google (requires open bootloader).

I think you're right that factory reset doesn't do what is expected. Once I click it, the phone reboots and shows the Android guy next to an unwrapping package. This lasts only 2 seconds, then it reboots itself again and goes into normal phone mode (where all the app-crashing starts again).
I have not flashed or rooted my phone before, but I will consider this now since my NS is pretty much a brick. Thank you for your swiftly response.
Edit: Shouldn't I get a menu, when I push and hold vol- button, while turning on the device? Right now it just boot as normal.

Before you use odin....try going into rom manager a reflashing clockwork! Ive had that android dude on my screeen but reflashibg via rom manager always fixed it. Try that
Sent from my Nexus S using XDA Premium App

Wow my Nexus has totally shut me out.
I cannot use ClockworkMod unfortunately since I am not able to root my phone. It is not detectable via USA (when I use vol+/pwr and connect USB). I am unable to check the USB Debugging option on the phone. Each time I check it, go to home-screen and back to the menu, it has de-selected it again. Also I noticed when I read the info that is sent to Google for all those app-crashes I get, I see SQLiteException and error in an SQLite.java file. So it seems like some database layer is broken.
I read one could copy the ClockWork.img to my phone and use the standard recovery option to flash the img (I think). But when I go into the recovery menu, the file is gone. When I boot the phone again, it has deleted the .img file - eventhough if I copy it to several different folders, they are all gone :-(.
I feel pretty screwed at the moment. How can I else wipe all data?

I'd recommend to check if your device is correctly identified in windows. Missing USB drivers might cause problems. Get the latest drivers and a guide from here.
If you succeed booting into fastboot properly (vol up and power) you can follow this guide. Get the latest cwm recovery.img here.
Last option would be to boot into download mode (vol up + vol down + power + plugging in usb cable) and use Odin from samfirmware.com
--
All options require correctly working USB drivers.

I managed to unlock the bootloader, by quickly turning on USB-debugging (before any processes started to crash) and install the drivers from this post:
http://forum.xda-developers.com/showpost.php?p=6819751&postcount=4
A reboot later, I got this message:
"System UIDs Inconsistent
UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable."
Right below was a button saying "Im feeling lucky" (??)
I installed ClockworkMod using fastboot and tried "Fixing permissions" with no luck. I will try some ROM later on, and hope it will bring my phone back

Normally this error happens when you have a faulty app ruining your system, formating/deleting whole sdcard does usually fix this.

rentaric said:
Normally this error happens when you have a faulty app ruining your system, formating/deleting whole sdcard does usually fix this.
Click to expand...
Click to collapse
I can safely mount USB-storage and format the whole bunch?
I been sweating over this stupid issue all day now, all I want is a fac-reset :´(
Edit: "format /sdcard" using CWM didn't do anything

DennisRP said:
I can safely mount USB-storage and format the whole bunch?
I been sweating over this stupid issue all day now, all I want is a fac-reset :´(
Edit: "format /sdcard" using CWM didn't do anything
Click to expand...
Click to collapse
See I'm no expert on this whole thing. At this point I'd just flash a whole new system via Odin. Prolly not the smartest or safest option, but that's what I'd do because I don't know better. If that wouldn't fix it either, I'd return the phone on warranty

I was looking at Odin from the start, since nothing else seemed to be working.
So right now I got started on Odin. Followed the .pdf steps and flashed the bootloader at first succesfully. I was asked to remove the battery and re-connect my NS. Began downloading "pda" and "phone", but at around 10% a big fat red "fail" message appeared and now I just see the Google-logo on startup. I still cant flash any roms via fastboot.
Im too tired too right now, been working with this for 14 hours straight. I will look at it tomorrow evening. Thanks for your help rentaric

Weird, you're not the first one who had trouble running Odin using their guide.
Overall it's pretty simple.
Enter download mode. Vol up vol down and power at the same time while plugging in the USB cable. Start Odin, should show a yellow colored box with a port number. Uncheck everything but reset timer and auto reboot. Unzip the correct zip file from samfirmware.com (check if you got i9020 or i9023 and get the universal Odin exe), apply file from the folder accordingly. Bootloader and bootloader. Phone and modem. Pda and pda. Csc can remain empty (will change carrier info in fastboot).
Double check md5 hash to avoid broken files.
Sent from my Nexus S using XDA App

rentaric said:
Weird, you're not the first one who had trouble running Odin using their guide.
Click to expand...
Click to collapse
Of course I did not go to bed, how should I be able to sleep with a broken phone .
The firmware suggested on samfirmware.com for my phone, was 2.3.3 and some other version (my phone was 2.3.4.2/GRJ22 or something similar, I suspect that might be the cause. Also I unchecked everything, that might also have been of importance). The flash will always fail when everything was downloaded - it then said something about "remote" and "Loke" and then fail. But as I mentioned, I had succesfully flashed boot.img (2.3.3) thus no boot occured now. I googled the correct bootloader, used fastboot and was booting succesfully again.
I began looking more into the sdcard, as error-messages was leading me this way. To compress 4 hours of investigations into a few lines, it seems as my PBA is malfunctioning as other xda-members have experinced. Only solution is sending the phone to Samsung for a PBA replacement. I purchased the phone in Bestbuy USA and the danish Samsung partners are not too joyfull about this - I will contact Samsung and hope they can help me.
I experinced the exact same thing as this poor guy - http://forum.xda-developers.com/showthread.php?t=993403
Every thing you try to do to /sdcard is worthless.
Formatting (USB/using CWM/using adb shell linux commands) says "Succes" but nothing happens.
Copying files says "Succes" but nothing happens. If I boot phone into CWM, mount usb and upload new rom/apk/whatever and try to do a "install update.zip" it fails with some mounting errors.
Im ready to go cry in a corner - I really want this to be fixable via software, but I probably have to realize that this is a hardware issue.

Apparently Samsung doesn't offer worldwide warranty for cellularphones :´(. God it sucks to pay repair-expenses on a 1 month old mobile.

Having the oddest problems. Fear a brick.

I am on a Verizon Razr Maxx HD (xt926). This all started when I decided to cleanly flash the newest version of CM10.2. I had been running it before. I wanted to start from a blank slate, so I went into TWRP and did the format wipe. Installed the newest CM10.2 nightly and gapps. This went fine and I booted into the ROM and started recovering all of my stuff. I installed F-droid and AdAway, and rebooted for that. The phone never got past the Bootloader Unlocked warning screen. I turned it off and went into TWRP to try some things. I tried to fix permissions, but it failed, referencing something to do with fdroid. I wiped again and reinstalled CM, but I still couldn't get past the Bootloader Unlocked warning.
I booted into TWRP again and wiped what I could, and accidentally wiped my external SD, and I had no card readers lying around to get the ROM zips back onto it. I downloaded the Razr HD utility, used the batch file, and tried to flash the stock rom through fastboot, but it got stuck in some kind of loop and would not flash correctly. I then tried to do it manually, but got some sort of buffer error. I tried again, and it started ok but I never saw it actually finish flashing.
By this time I finagled the ROM zips onto the SD card and stopped the fastboot and booted into TWRP. I did another set of wipes, and rebooted into TWRP again. I flashed the CM and Gapps. The ROM booted fine from TWRP and I was able to start setting up my account again. I tried rebooting after the initial setup just to see if it was working correctly, and was met with the fastboot screen with fastboot reason: Flash failed. I rebooted into TWRP from there, and tried to boot normally, but it still brought me to the fastboot. I went to the boot menu and tried the normal boot selection, and now my phone is stuck on the Bootloader Warning screen and now it won't even turn off when I hold the power button.
I have no idea what is going on, or why I could get to the working ROM once but not again. Does anyone know anything that could help me?

Kopiok said:
I am on a Verizon Razr Maxx HD (xt926). This all started when I decided to cleanly flash the newest version of CM10.2. I had been running it before. I wanted to start from a blank slate, so I went into TWRP and did the format wipe. Installed the newest CM10.2 nightly and gapps. This went fine and I booted into the ROM and started recovering all of my stuff. I installed F-droid and AdAway, and rebooted for that. The phone never got past the Bootloader Unlocked warning screen. I turned it off and went into TWRP to try some things. I tried to fix permissions, but it failed, referencing something to do with fdroid. I wiped again and reinstalled CM, but I still couldn't get past the Bootloader Unlocked warning.
I booted into TWRP again and wiped what I could, and accidentally wiped my external SD, and I had no card readers lying around to get the ROM zips back onto it. I downloaded the Razr HD utility, used the batch file, and tried to flash the stock rom through fastboot, but it got stuck in some kind of loop and would not flash correctly. I then tried to do it manually, but got some sort of buffer error. I tried again, and it started ok but I never saw it actually finish flashing.
By this time I finagled the ROM zips onto the SD card and stopped the fastboot and booted into TWRP. I did another set of wipes, and rebooted into TWRP again. I flashed the CM and Gapps. The ROM booted fine from TWRP and I was able to start setting up my account again. I tried rebooting after the initial setup just to see if it was working correctly, and was met with the fastboot screen with fastboot reason: Flash failed. I rebooted into TWRP from there, and tried to boot normally, but it still brought me to the fastboot. I went to the boot menu and tried the normal boot selection, and now my phone is stuck on the Bootloader Warning screen and now it won't even turn off when I hold the power button.
I have no idea what is going on, or why I could get to the working ROM once but not again. Does anyone know anything that could help me?
Click to expand...
Click to collapse
Try the solution in the last few posts on this thread. http://forum.xda-developers.com/showthread.php?t=2465695

I hope you get more knowledgeable advice than mine but, were I in your situation, my primary goal would be to get back to STOCK. Forget CM and modding for now. Either through TWRP or through the recovery settings on the phone itself I'd get to where I could do a factory reset. If you're continuously able to boot into TWRP I don't see how your phone could be bricked. My experience is, if I can get a phone to do ANYTHING I've got a shot at figuring out how to get out of whatever mess I've created. I don't know if this could be a factor but I'd put in a different micro SD card too, in case there's something on the card you've got in there.

Just an update. So, I got it to go back to fastboot this morning and I tried using the Razr Utility to flash back stock and stock recovery, but I got a "Failed" line with the reason "Remote Failure". Not sure what that's about. When it reset it got back to the Cyanogenmod boot graphic, but it never started. I left it there for a good 12 minutes.
Right now it's sitting in TWRP. I'm going to let it charge to 100% (it was a little less when I tried all of this) and attempt it again at 100% battery. Thanks for the help so far!

So, I tried using the Razr Utility to flash the system, kernel, radio and for system it was unsuccessful (something about too many threads or strings, something to that effect), but the rest said OK. Now my phone doesn't seem to turn on. My computer still makes the device plugged in sound when it's plugged/unplugged, but I cannot get the screen to show anything or seem to turn on the phone.
Is this it? Is it... bricked!? ;-;
Edit: I ordered the Factory Adapter as a last resort sort of thing. This is lame.
Edit Edit: I've seen the boot logo since my last edit! But... it's not coming back and I still can't even bring up the bootloader. I don't know why it will sometimes turn on or sometimes not. In any case, I'm now hopeful that not ALL is lost.

Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!

cellzealot said:
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
Click to expand...
Click to collapse
That's the plan! One odd thing happening now... My phone's screen isn't showing anything, so I assumed it was off. I left it unplugged and went to see a movie..... and the phone is still warm. This leads me to believe the phone is still drawing power, for some reason... God this is weird. I'll wait for the adapter and try again. Thanks for the help!

cellzealot said:
Bottom line, the adapter will allow you to fix your phone and flash the stock FXZ in RSD Lite or fastboot and get back to a clean slate and start over.
That's why we went to the trouble of making them!
Click to expand...
Click to collapse
according to the packaging on mine from tbh a chinaman made it, just sayin

Yes, we designed them and contracted through our US supplier who produced all of our cables who, in turn, had them produced in China according to our specifications. There is no longer any injection molded plastic production done in the US that can work at this small scale for affordable rates.
Sorry...that's the way the world works these days.

cellzealot said:
Yes, we designed them and contracted through our US supplier who produced all of our cables who, in turn, had them produced in China according to our specifications. There is no longer any injection molded plastic production done in the US that can work at this small scale for affordable rates.
Sorry...that's the way the world works these days.
Click to expand...
Click to collapse
thanks for making it either way, better to have and not need.
havent had to use it so far

bweN diorD said:
thanks for making it either way, better to have and not need.
havent had to use it so far
Click to expand...
Click to collapse
You're welcome! They are definitely the best $10 investment you can make in any Motorola phone.
Next time you want to invest many thousands of dollars of your own money in a wild, hairbrained scheme to help a bunch of anonymous people on the internet fix their phones that they recently finished destroying themselves, let us know...we have just the plan!

cellzealot said:
You're welcome! They are definitely the best $10 investment you can make in any Motorola phone.
Next time you want to invest many thousands of dollars of your own money in a wild, hairbrained scheme to help a bunch of anonymous people on the internet fix their phones that they recently finished destroying themselves, let us know...we have just the plan!
Click to expand...
Click to collapse
how many thousands, and whats the plan?

I got the Factory Adapter and used RSD Lite to flash stock. And it works! Yay! It's starting up reliably and everything.
Except... it won't start up without the cable attached, and the battery icon has a big question mark on it. It also won't connect to the cell network (but does connect to WiFi). What do I do now?
Edit: So I noticed that while the battery status said "Unknown", it did go from 2% to 3% charge level when I plugged it in normally for a little. My plan at the moment is to try leaving it plugged in for a while and then try taking the OTA update to see if that fixes everything. Good plan?
Edit Edit: Never mind! I just had to let it charge for a bit. It seems to be back in working order, now! Thank you so much for all the help everyone!

That is exactly what is supposed to happen. Congrats on fixing your phone!
The factory cable/adapter does not charge the device but powers it directly, allowing it to boot no matter what state the battery is in or even without a battery at all.
You cannot charge in bootloader, which is why the cable/adapter is so valuable. Once the device can boot/charge normally then you are all set.

[Q] Ok so my device is not quite dead but close please help

Hi Everyone,
I've come on bended knee, and I have about 30 xda windows up where Ive tried to upgrade a perfectly working LG from android 2.2. But no matter what I try I cant get beyond the LG wink icon on the screen.
I have tried fastboot omao4boot 1.22 modified etc but I cant get past MLO (x-loader) I say YES to this but NO to 'fastboot devises' as per instructions (although why I say no to this, I dont know?) anyway it just says 'waiting for device' but nothing happens even if I take the battery out and disconnect from USB and reconnect, nothing ever happens?
So having redone the fastboot procedure, I managed to into boot mode - yellow round icon on screen and then tried to flash using LG flash tool 1.2 with LGP920 30A bin & fls files which it does and completes successfully, I have also used the LG recovery tool to flash recovery and firmware but all of the above wont let me boot the devise it just sits at the LG Icon.
Tried booting into recovery with 3d + vol + key but just ignores and goes to red LG Icon with the usual boot sound, I just cant get anything else to work! Is it down to the MLO loader issue. I dont know what else to do.
Please can anyone help me recover my phone I wanted to upgrade to JellycreamR5 cause its suppose to be a good rom but nothing now works :crying:
I know its not a busy forum now days and most have moved on, but please any assistance to get this beautiful phone going again would be brilliant.
Thanks for the time to read about this dilemma!
ATB

Ok, so if it boots to the LG logo with boot sound it is probably nothing wrong with bootloaders. It is either the system or just something incompatible on the data partition. Of you can make it too recovery try factory reset

Ok I think Ive fixed it!
Did lots of things to try to get to work, but heres roughly the guide.
Used 'rebooter' for Optimus 3d which saved the phone in the 1st instance, it was the only flasher that completed the flash... but remember 1st unplug the phone but micro usb in then remove the battery, then hold the + vol key and insert into the Win XP computer usb, I had already prepared and ran the rebooter.bat file which was waiting for omao device. Once detected keep hold the + key add battery when it says wait 5 secs, dont let the key go, say NO to flash boot but yes to the rest. It will say job done or words to that effect.
Turn on phone holding just the + key to get into download mode. Change the LGE CDMA USB SERIAL PORT to com41 in control panel device manager, refresh search for new hardware to check updated port.
Then use LG Flash to flash V3.0A which worked !
Disconnect the phone remove battery and reinsert, reboot devise, it will boot in TWRP which isnt great but good enough for flash, loaded a Rom onto the sd card and installed the software, after the usual clearing everything like Delvick/Settings etc.
Job done, rebooted and worked, still got TRWP on the boot loading would prefer Clockwork but never mind, had enough of fiddling and just enjoying having my device back
Havent tried a sim in it but might have to to the IMEI fix but hoping not.
Many thanks for your input, I know tech moves on, but there is a wealth on knowledge on these devices and it just seems to be lost in the ether.
Best wishes.

Worst case scenario ****up, need help badly :(

After 8 years of tinkering with Android phones I have no clue how this happened.
PIXEL 2 (Walleye, non-xl)
Tried getting TWRP and ElementalX working but either one or both weren't doing there thing, though I could at least boot and use my phone normally. Finally ended in a situation where I couldn't boot passed fastboot with an error at the bottom "ERROR: LoadImageAndAuth Failed: Load Error". Found a fix that said to change the active partition. Set it to b and that worked and surprise it loads TWRP...so somehow TWRP was installed, but I can't actually load Android.
Grabbed the latest factory image and manually flashed all the files in the zip-within-the-zip. Everything flashed with no hiccups so I rebooted to bootloader with the intention to then reboot the system, and now this is happening:
TLDR Phone won't turn on. Holding PWR+VolDown SEEMS to do nothing, but it actually flashes a line on the screen like it's trying to load something for a milisecond, then does nothing. Holding PWR+VolUp does nothing. Holding PWR+VolUp+VolDown does the same screen flash followed by the notification LED blinking red 2 or 3 times. Please help!
EDIT: if it matters, the phone is about 50% battery and currently still on judging purely by the fact that it's been warm for about an hour.

sorry for your troubles, i have yet to see this with our phones. Just to get some more information, what happens when you try and charge it? If you plug your phone in to a computer via USB, does it show up in devices? If it shows in devices, can you run platform-tools and see if it shows up via fastboot devices with an ID? If you can connect to fastboot, you could attempt to flash images that way.

djer34 said:
sorry for your troubles, i have yet to see this with our phones. Just to get some more information, what happens when you try and charge it? If you plug your phone in to a computer via USB, does it show up in devices?
Click to expand...
Click to collapse
Nothing happens if I plug into the computer, no sound and not listed in devices. Plugging it in to the charger does nothing except possibly charges it, but I wouldn't know because the screen doesn't seem to be able to turn on for more than a milisecond of a flash.

I had this same problem when I flashed Elemental X kernel over top of the flash kernel and all I did was use the flash-all script that is included with the system image from google. This got me back to my OS where I flashed elemental and magisk. Do you have insurance through your provider?