Related
WARNING:You must Have The Correct Radio and Latest SPL! You can find them here (RADIO MUST BE INSTALLED FIRST) You can find it here
PLEASE DO YOUR RESEARCH BEFORE FLASHING ANY ROM INCLUDING MINE IT WILL SAVE YOU AND OTHERS TIME AND HEADACHE!!!
First A big thanks to Haykuro for providing the system dump of the latest known Hero build. Great contributions from Haykuro always!!! Make sure to thank him!!!
This ROM is based off the latest "HTC" ROM leak 2.83.x.x with tons of mods enjoy!!
This is the same as the build posted in the dream section,we just wanted to keep the two threads clean so all MT3G/Sapphire Q: and problems should be posted here. As of now it works only on 32B but 32A kernal is being worked on so will be coming soon give ccyrowski time he is working hard for us.
NOTE: Once you flash before you sign in do the led fix in the instructions,also we recommend using ext3 and a 64MB Linux-swap partition.
JacHEROSki 2.2r4 Remix More Specs Coming!
Fix Video audio
Added lastest tether 1.60
Added Sapphire folder
Added the new LED app By jinx10000
JacHEROSki-v2.2 - Experimental A & B
A
-2.6.29.6-jac-ski [email protected]
-BFS 240
-supports MyTouch out of the box!
-MT
-various ramconsole and usb patches
-other things I can't think of
B
-same as A with the 10MB RAM hack (10 extra MB of RAM)
-other things I can't think of
Install Instructions
First using adb I remove the ext3 and linux swap if you have them set already like this, remember the numbers will vary with the size of you card but I will show mine as an example.
In Recovery
This Removes the partitions
adb shell
parted /dev/block/mmcblk0
rm 2
rm 3
This makes the partitions ext2 and linux-swap 64MB remember numbers vary according to the size of your S.D if your not sure ask first.
mkpartfs primary ext2 3767 3901
mkpartfs primary linux-swap 3901 3965
This upgrades the ext2 to ext3
quit
upgrade_fs /dev/block/mmcblk0p2
Now with the build on your S.D
Wipe
Flash the build A or B
Now once the build loads up you may get a FC on HeroLED.apk which there is a fix that I know of for MyTouch but cant be done because the sapphire folder is not in the build and not needed the HeroLED.apk is not needed since they work without it.
Phone on as normal
Fixing the HeroLED.apk
Fix the FC on HeroLED.apk and also get your phone to read as a Magic/MT3G.
Terminal
su
rwsystem
magic
reboot
Click to expand...
Click to collapse
This is how I install my builds and have it running as smooth as I do if your not sure you can do all this don't try. I do it and my phone runs sweet, but I will not take blame for people messing up there phones because they don't know what there doing.
JacHEROSki 2.2r4 Remix: http://www.4shared.com/file/136918974/b6e7bf4c/jacheroski22r4_Remix.html
JACxHEROSki-v2.2a: http://www.justanotherdev.slackdev.com/jacheroski2.2a.zip
JACxHEROSki-v2.2b: http://www.justanotherdev.slackdev.com/jacheroski2.2b.zip
Good **** thanks manup. Will you be adding BFS-300 to this tonight?
Omg...cant wait for 32a version ....STILL !!!!!
rebooting with new remix rom
I am getting frequent reboots ( about every 30 minutes) and also am getting a force close due to leds any ideas?
oops
I found the fix for the led force close. any idea on the rebooting?
Well the rebooting I have not seen on these ROMS really I would reflash again and let me know if still keeps happening,also are you using the remix or what version?
@jabbawalkee
I will maybe drop tonight not sure its up to cc but the BFS-300 will have the 10MB hack for MT3G/Magic for those who dont know that. I know you do but some are waiting so I tossed that info in there.
@Daneshm90
I know bro I am working on getting that for you hopefully today but cc is a bit under the weather so we will see.
manup456 said:
Well the rebooting I have not seen on these ROMS really I would reflash again and let me know if still keeps happening,also are you using the remix or what version?
@jabbawalkee
I will maybe drop tonight not sure its up to cc but the BFS-300 will have the 10MB hack for MT3G/Magic for those who dont know that. I know you do but some are waiting so I tossed that info in there.
@Daneshm90
I know bro I am working on getting that for you hopefully today but cc is a bit under the weather so we will see.
Click to expand...
Click to collapse
Thanks man. I have 300, but wasn't working too well when I flashed it as an update over A...may try deleting/recreating my partitions and re-trying it.
Not sure bro I have been using it since yesterday on a fresh fromat and install and its been really good for me so yeah I would def give a fresh format and install.
manup456 said:
Not sure bro I have been using it since yesterday on a fresh fromat and install and its been really good for me so yeah I would def give a fresh format and install.
Click to expand...
Click to collapse
Are you using it on A or B?
No I use a whole ROM with it built off of 2.2r4 thats what I thought you had P.M me to see what it is your using.
manup456 said:
No I use a whole ROM with it built off of 2.2r4 thats what I thought you had P.M me to see what it is your using.
Click to expand...
Click to collapse
Check your box
Great work.
After seeing that Tweet from last night. I'm glad to see this up-and-running this afternoon.
About time the "official" build finds a home in the Sapphire Development Section.
Oh, and thanks for the hard work put in last night. I was working like a dog, testing for CC last night on that BFS-300 patch. Lol.
(not that it was "hard" work or anything.)
Glad to see you in this section though.
No prob I will be around in both sectitions because I have both G1 and the MT3G,I wanted it to not be so mixed in the dream thread people seemed to get confused there will be a update either today or tommarrow that will be real nice.
I am helping as much as I can but cc is killing it with all his new work and mods mike's user.conf is also amazing.
manup456 said:
No prob I will be around in both sectitions because I have both G1 and the MT3G,I wanted it to not be so mixed in the dream thread people seemed to get confused there will be a update either today or tommarrow that will be real nice.
I am helping as much as I can but cc is killing it with all his new work and mods mike's user.conf is also amazing.
Click to expand...
Click to collapse
Take your time tonight.
You might as well drop tomorrow, just give everything a chance to settle today.
People are hyped enough on the BFS-300 high. Lol. No need to cause a global overdose.
I'm eager to see this user.conf you speak of. Some sweet-ass options within I hope! As for the G1 and MyTouch, same here. But, I have three MT3G devices. (employee of; you guessed it.) Anyway, if you need a tester later tonight or whatev.
TWEET ME!
US MT3G w/2.2a problems
First, I have an 8GB SD card, with the standard partition sizes (7GB FAT32, 32MB Linux-Swap, and the rest Ext3)
I am using Cyanogen 1.4, and I did a wipe, and check of my ext before updating. The SD card was empty on all partitions, except the 2.2a named as update.zip
First thing I saw on startup (and every startup) is the LED notify crash, but more serious is the phone being stuck in headset mode. Tried rebooting, plugging in charger, plugging in actual headset, but it was just stuck on.
I ended up flashing back to my stock tmobile 1.5 firmware until it's more stable.
My knowledge of this device is a bit limited at this point. I know I am running the latest radio, but I am not clear on what SPL is (or ADP for that matter).
Can anyone help fill in the blanks or tell me what I am doing wrong?
tia,
-dana
I said in the first post that swap is better at 64MB and there is instructions in the first post that talks all about the FC on HeroLED all you need to do is hit o.k and follow the steps posted. Also coming from another wipe a format of the ext3 should have been done read the first post.
Does everyone have the auto-backlight option?
Same issues...
manup456 said:
I said in the first post that swap is better at 64MB and there is instructions in the first post that talks all about the FC on HeroLED all you need to do is hit o.k and follow the steps posted. Also coming from another wipe a format of the ext3 should have been done read the first post.
Click to expand...
Click to collapse
Thanks for pointing that out, I now see the instructions that I did not notice before.
I used Ubuntu to delete my partitions, and re-do them with the sizes stated in the instructions, so the partitions are clean. I then copied the update.zip (22a) to the card, and put it in the phone. Started Cyanogen, wiped, repaired ext partition, and installed the update.zip
I still have the headset indicator stuck on.
Went into terminal, but could not get a keyboard to come up. I used "better terminal emulator" instead, which should work. I followed the steps, but when I got to "magic", it came back with "rm failed for system/bin/sapphire, no such file or directory"
I still have the LED FC at startup, and am still stuck in headset mode.
Any ideas?
tia, again,
-dana
dleasman said:
Thanks for pointing that out, I now see the instructions that I did not notice before.
I used Ubuntu to delete my partitions, and re-do them with the sizes stated in the instructions, so the partitions are clean. I then copied the update.zip (22a) to the card, and put it in the phone. Started Cyanogen, wiped, repaired ext partition, and installed the update.zip
I still have the headset indicator stuck on.
Went into terminal, but could not get a keyboard to come up. I used "better terminal emulator" instead, which should work. I followed the steps, but when I got to "magic", it came back with "rm failed for system/bin/sapphire, no such file or directory"
I still have the LED FC at startup, and am still stuck in headset mode.
Any ideas?
tia, again,
-dana
Click to expand...
Click to collapse
Get 2.2r4, not 2.2a
manup456 said:
Does everyone have the auto-backlight option?
Click to expand...
Click to collapse
No auto-backlight option after installing 2.2r4 and running the magic script.
Hi guys,
I own a POLA100 Cruise.
I:
- Downloaded polymod 2.1g UPDATE + DARK THEME 04 Mar
- Downloaded Haret Install
- Renamed default.txt to original-default.txt
- Renamed defalult-polaris.txt to default.txt
- Partitioned a 2 Gb SD as: 900 Primary Fat32 + 1024 Extended (2 x 512 Ext2 Partition).
- Copied on Fat32 partition the folder "andboot" Haretinstall+Pack.tgz
... I launch Haret....
THE FIRST TIME ... Linux booted, but when i hold the D-Pad... Cruise show @A ... and then TIMEOUT.
Now (from second time to now....) ... Haret Run... and I see wierd color and bad lines on the screen.
What I can do to launch a good android image on my Pola100 ?
Anyone can create a "Pack" with Haretinstall, the right default.txt and the polymod 2.1g UPDATE + DARK THEME 04 Mar of this thread http://forum.xda-developers.com/showthread.php?t=600154 ?
Thanks a lot.
I know that I'm not helping, but... I have the same problem here.
foxct2005 said:
Hi guys,
I own a POLA100 Cruise.
I:
- Downloaded polymod 2.1g UPDATE + DARK THEME 04 Mar
- Downloaded Haret Install
- Renamed default.txt to original-default.txt
- Renamed defalult-polaris.txt to default.txt
- Partitioned a 2 Gb SD as: 900 Primary Fat32 + 1024 Extended (2 x 512 Ext2 Partition).
- Copied on Fat32 partition the folder "andboot" Haretinstall+Pack.tgz
... I launch Haret....
THE FIRST TIME ... Linux booted, but when i hold the D-Pad... Cruise show @A ... and then TIMEOUT.
Now (from second time to now....) ... Haret Run... and I see wierd color and bad lines on the screen.
What I can do to launch a good android image on my Pola100 ?
Anyone can create a "Pack" with Haretinstall, the right default.txt and the polymod 2.1g UPDATE + DARK THEME 04 Mar of this thread http://forum.xda-developers.com/showthread.php?t=600154 ?
Thanks a lot.
Click to expand...
Click to collapse
edit the default.txt to:
set RAMSIZE 0x08000000
set MTYPE 1723
set KERNEL zImage
set initrd initrd.gz
set cmdline "board-htcvogue.panel_type=1 ppp.nostart=0 pm.sleep_mode=1 mddi.width=240 mddi.height=320 lcd.density=120 no_console_suspend board-htcpolaris-battery.battery_capacity=1350 mddi_client_vogue.vsync=0"
boot
if this also not boot change: board-htcvogue.panel_type=1 to 3
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
foxct2005 said:
THE FIRST TIME ... Linux booted, but when i hold the D-Pad... Cruise show @A ... and then TIMEOUT.
Now (from second time to now....) ... Haret Run... and I see wierd color and bad lines on the screen.
Click to expand...
Click to collapse
I have the same problem sometimes.
There are 3 situations I met.
(1) Wierd color screen with no response.
(2) An error message shows after "Press the DPad".
(3) A Successful boot.
Either (1) and (2) will happen if the boot text doesn't show immediately after the vibration of Haret Run. If the boot text shows immediately (maybe within 5 seconds) after the vibration, there will be a successful boot. Though I don't know which time it will success, I always press the DPad just after the vibration. If it fails, I will do soft reset and try again (or give up).
I change only zImage to zImage-eclair in the default-polaris.txt when using polymod 2.1g. For Myn's Warm Donut, I change nothing.
So, you may do more tries.
p.s.
I use fat32/Ext2/Ext2.
Although the speed of polymod improved, still much slower than the Myn's. But the Myn's seems to have more little problems on Polaris.
Sorry for my English.
Good luck.
solvga said:
(1) Wierd color screen with no response.
(2) An error message shows after "Press the DPad".
(3) A Successful boot.
Click to expand...
Click to collapse
Exactly the same for me. Most of the times its the first scenario for me.
Even after a successfull installation i have problems after a softreset.
I launched Haret and hold D-Pad immediately after Vibrate on RUN... and during all boot sequence... but i have this error
msm_i2c.0: error waiting for notbusy
Some suggest?
Bye.
foxct2005 said:
msm_i2c.0: error waiting for notbusy
Click to expand...
Click to collapse
That is what I mean by (2) An error message shows after "Press the DPad".
Just try Haret again.
code PIN problem
Hi,
I have another problem with installing Android via SD.
Everything works but at the time of typing PIN code, I enter my PIN code but Android tells me it's an "incorrect pin".
Do you have the same problem?
thanks
I made other 5 tries... 2 with polymod and 3 with wormdonut...
In these tries... both with polymod and wormdonut i had this:
- Running Haret
- After Vibrate... Hold D-Pad
- Even D-Pad hold.... i had a messange "error waiting for not busy"
- I released D-Pad and Hold Again
- After some times of error "error waiting for not busy".... INSTALLED STARTS!!!!
- I had on Screen the message "Warning - Installing android can wipe your device <OK> "
- I pushed D Pad to Give "OK", but nothing happened on my cruise....
- Then.... "Error waiting for busing... in loop"... and I can't install anything.
My question Is.... after install Starts and warning message appairs.... what i can do to launch install ?
Which ways to select ? D-Pad ?
If i could press <OK>... which install method i have to select to install ?
Regards.
FoxCT.
damdirt21 said:
Hi,
I have another problem with installing Android via SD.
Everything works but at the time of typing PIN code, I enter my PIN code but Android tells me it's an "incorrect pin".
Do you have the same problem?
thanks
Click to expand...
Click to collapse
disable pin win wm
Which default.txt have you used? I tried it with adapted ones several times and always got this "..waiting for no busy..." error. Stepping back to original default-polaris.txt everything worked fine even after reset.
=)
thank you very much, It works now =)
to GOY2K - installation problems
goy2k said:
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
Click to expand...
Click to collapse
dear GOY2k
i am having the problem at the first step. i downloaded the 240x320 file, then installed it in SD card (i have a micro SD card) in folder andboot. then i ran Haret and pressed the Dpad button and have kept it pressed. For the next 20 minutes i have just stayed in that position, with nothing happening at all.
kindly tell me where i am going wrong.
regards
o2-lover
to Goy2k - new problems
goy2k said:
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
Click to expand...
Click to collapse
DEAR Goy2k
i finally got around to get installation process started - i changed default.txt to default-polaris.txt and it got started.
it asked me options and i chose INSTALL SYSTEM.
after installation started, i followed it as much as i could and i found that in many places, it kept mentioning cannot find or cannot install.
in the end, it fails to install android and the first menu comes back giving options. i finally quit after 3 tries.
what mistake am i making.
regards
o2-lover
to Goy2k - one step ahead - new problem
goy2k said:
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
Click to expand...
Click to collapse
Dear Goy2k
i finally got to the following stage now, after various steps-failure messages during installation:
my set rebooted and ANDROID is written in a black screen. a cursor runs below it from left to right. sometimes it stop at the right, then after a while screen goes blank and then ANDROID reappears and the curson starts again.
currently this is going for about 10 minutes or 15 minutes already.
is this going in the right direction? anything else supposed to happen? or should i wait till the battery dies??
i hope you get this now and can reply now.
regards
o2-lover
to Goy2k - final step apparently
goy2k said:
Hi,
use warmdonut from http://forum.xda-developers.com/showthread.php?t=619980
version 240x320. Copy it to your sd-card, run haret using default-polaris.txt. Immediately after you've pressed "run", press d-pad as long as needed to start setup (seems to be very long...).
It's important to press d-pad during boot of android. After installation it runs like a charme. When u need wlan, do an update using the provided wlan update.
No need to do any changes to default-polaris.txt exept if you don't want to start ppp at bootup. This release is much faster than polymods.
Have fun ;o)
Click to expand...
Click to collapse
Dear Goy2k
i am sure you must be laughing by now at my follies.
i have been hoping for a long time to install ANDROID on my O2 XDA ORBIT II.
now, the ANDROID screen has progressed to a new bottleneck. A BLACK SCREEN showing the words 'COULD NOT SET PROPERTY'. this has come twice.
and now for the past 10 minutes or so, i am stuck at this screen.
how long is this supposed to take ??
regards
o2-lover
Hi O2-lover,
sorry for that late answer, but I'ven't got the time to look for this thread. I'm using a Orbit 2 too. All I've done was to use default-polaris.txt. I only got in trouble when I tried to install it on SD-Card (I think this is one option). Later I created 2 ext2 (each 256mb) patitions and one swap partition. On installation I choose to install it on ext2 (both, system and data).
From now, I think my data partition is not used, but I'll sneak around at weekend, maybe to install it on NAND.
to Goy2k - i got it working finally
goy2k said:
Hi O2-lover,
sorry for that late answer, but I'ven't got the time to look for this thread. I'm using a Orbit 2 too. All I've done was to use default-polaris.txt. I only got in trouble when I tried to install it on SD-Card (I think this is one option). Later I created 2 ext2 (each 256mb) patitions and one swap partition. On installation I choose to install it on ext2 (both, system and data).
From now, I think my data partition is not used, but I'll sneak around at weekend, maybe to install it on NAND.
Click to expand...
Click to collapse
dear Goy2k
thank you for the reply. after a number of tries, i finally got android installed. but it does have a big disadvantage. sometime or the other you are bound to have to switch your phone off for some reason. or you may forget to recharge the battery on time. well, when you switch it on, it goes back to windows.
SO UNLESS YOU ARE ABLE TO FLASH ANDROID ROM, it is not going to be a long time fun.
i am now going to try and get win 6.5. i have already upgraded to 6.1 from 6.0
best regards
o2-lover
Since I posted a thread: http://forum.xda-developers.com/showthread.php?t=675311 and nobody could help me. I spent the past 5 days trying to get it to work and did it successfully (through haret).
Here's how to did it:
1. Download this .RAR I put together that includes:
-Eclair
-haret
-default.txt
2. Edit the "mddi.width=320 mddi.height=480" part of the "default.txt" to your needs. (either 320/480 or 240/320)
3. Put the content of the folder "android-orbit2-eclair" to the root of your SD card so it should be something like this:
Code:
-(D:) SD Card [COLOR="Red"](root)[/COLOR]
--conf
--media
--default.txt
--haret.exe
--initrd.gz
--rootfs.img
--system.sqsh
--zImage
4. Navigate to the SD Card (start>programs>file explorer>storage card) and click on the "haret.exe"
5. Once that has loaded up click "run" (about 3 lines down on right side)
6. Just wait, Give it chance to do its thing and simple... Android running on your XDA orbit 2.
any problems, reply to this thread and I will try to fix.
Thanks, James
it dosent work on my htc touch cruise.
I click on Run, and the screen becomes gradually black, and that finished as that… nothing any more occurs.
The screen is lit, but is black, and nothing occurs.
New problem now: I have the same message than you :
Code:
sh:2: unknown operand
losetup: /dev/block/loop 1: No such file or directory
Failed
Failed to reach system.img on SD card.
Whats the problem ?
nico85 said:
it dosent work on my htc touch cruise.
Click to expand...
Click to collapse
If you read the title it says for XDA orbit 2 not touch cruise.
Have you managed to get gprs/3g working with this? I can't seem to get mobile web working on my XDA Orbit II
I dont know whart u are doing here.
But i can use myns donut and eclair totally easy without modding something.
I just have to use the right "default.txt"...
Most packages you find here habe a "default-polaris.txt" in it or you use the one form myn ... It works great for the orbit 2 too
.....
But maby i dont get what you are doing here.. some special build or something?
BUt running android on orbit 2 is net a problem at all just use right conf.
-----------------------
@moondemon
Wifi works with myns eclair and donut. There are fixes (androidupdate.tar) you have to use (nomorootfs)
could u tell me which version have u installed? 1.6?
I succeeded installing the 1.6 version. but when I was trying installing the latest version, I was stucked at the screen which requires me to long-push the dpad center button. I did it but didnt work. I've even tried every keys, still didnt work.
could u give me a hand on it?
I have tried myn's and default-polaris does not work on my xda orbit 2. Also when I do get haret to run I have had trouble actually getting android to boot due to a continual "power wakeup" message. The default-polaris results in a flashing white screen for me. This config is the only config that actually works on my orbit 2.
Hello, i am just a newbie on Android for Polaris, so plz forgive me dump postings At the moment i am a bit spacy what i have to put together to work Android on my XDA2.
android-orbit2-eclair works on my XDA2 after installing but:
phone can't do outgoing calls:
3G can`t connect,
Cam/Gallery crashes
Wifi works.
Touchscreen works and all the rest.
before i installed the recent builds of froyo and eclair
System shows 10-15 min nice boot flash, then it works, but touch screen doesn`t work.
Anyway all the developers doing a great job here!
rgds Matthias
Im not using sd haret anymore. If you try with nand flash (http://forum.xda-developers.com/showthread.php?t=636024) everything works like a charm.
But as i used haret on my Orbit2 i was good with the package myn offered in her donut(or eclair im not sure).
In the package were a default.txt and a one for polaris/Orbit. I changed the polaris one to default (renaming) and it worked.
I think it was the donut package and it worked with zimages for eclair too.
Try this package if it works its worth a attemp to look into the default txt for other builds.
But atm i would suggest to give android at flash a try. Its almost perfekt for daily use if you not to much with some special programms on winmo.
As far as i read there are problems with haret atm gernerally that programms close even if install is fine.
Seems that flashing is the solution to all my problems, but
can you try to explain what makes the difference between haret and a NAND flash install relatet to the runing system?
Unfortunaley my XDA Obit2 is the carrier of my beloved navigation software. The other Wimo apps are junk compared with android. If there is a offline solution for Car Navigation on android, i could kick Wimo into the trash bin. Also i am a Linux user as well on my PC
Camera and astro application not working
Camera and astro application not working .. please help ...
xda orbit 2
I stuck these sections of
I've tried it and it seems it works, but I have a few questions and one major problem:
1. I installed the systems without the SIM card. When I started it again with SIM card, system says that the PIN I type is wrong altough I know that it's correct. How to solve it? Maybe it is so because I'm not O2 customer?
2. Is it possible to boot Android automatically without flashing NAND?
3. Can I theoretically Install Donut or Froyo using this method simply by putting different Zimage in the folder?
4. Do I have to perform another installation in case of buying a battery of more capacity? I saw that default.txt contains information about the battery.
5. May it work well If I change default.txt to the one prepared by atools?
Thanks for advance and greetings.
Double post, sorry.
running on my pola 200 / orbit2 but very slow i think my sd slow too
cingibi said:
running on my pola 200 / orbit2 but very slow i think my sd slow too
Click to expand...
Click to collapse
Can try rom from Scoot_CyanogenMod_6.1_RLS5.5_All_Language
I modified it for haret to O2_Orbit_2 (POLA200)_panel_3
All work perfectly except CAMERA
O2_orbit_2_panel_3_HARET_based_on_Scoot_CyanogenMod_6.1_RLS5.5_All_Languaget.rar
link bellow
http://www.4shared.com/file/01Vco3iR/O2_orbit_2_panel_3_HARET_based.html
Click to expand...
Click to collapse
denis__at said:
Can try rom from Scoot_CyanogenMod_6.1_RLS5.5_All_Language
I modified it for haret to O2_Orbit_2 (POLA200)_panel_3
All work perfectly except CAMERA
O2_orbit_2_panel_3_HARET_based_on_Scoot_CyanogenMod_6.1_RLS5.5_All_Languaget.rar
link bellow
Click to expand...
Click to collapse
Doesnt work for me ive left it about 20 mins and its still just a black screen. The first 1 worked but was slow.
hello, which rom is the best for o2 xda orbit 2 pola 200?
TO ALL PEOPLE:
PLEASE STOP POSTING IN THIS TOPIC ABOUT "THIS PART DOESN'T WORK ECC ECC" WRITE IN THE TOPIC OF THE RELEASE (KERNEL OR SYSTEM), PLEASE LOOK IN THIS THREAD FOR WORKING SETUPS AND TRICKS, AND SEARCH ON THE FORUM BEFORE POSTING!
I start with thread with a information for all users:
Haret system sucks so if you want a full working android system left windows behind you and move to the new android world flash on nand.
With this how-to you will not erase any part of your system but you do at your own risk.
Main problem: screen
For polaris there are 3 type of screen. Usually pola100 (the old one) use panel 1, and pola 200 (09 edition) has panel 3 but ... not always works...
The best mode to test is try to install and after double reboot you have black screen change panel type.
What you need:
phone
sd card (1 Gb or more) 500 mb free
time
Update guide: http://sourceforge.net/apps/trac/androidhtc/wiki/HowToInstallWithAtoolsHaret
reserved by me
Do we have to delete/remove the install-seq.sh after installation?
Are both files (system & data) cleared with the installation script?
Thanks for the help.
install-seq.sh disable automatically after correct install.
This how-to is fir first install on disk on images so it format both data an system.
If you want to make only un update use bsg select partion and select update.
partition
I believe you should make this sticky
Don't post without reading!!!!
This method doesn't use sd partition, it create two imagedisk on sd!
working android
l1q1d said:
Don't post without reading!!!!
This method doesn't use sd partition, it create two imagedisk on sd!
Click to expand...
Click to collapse
hi there,
i made all you told here, booting..after more minutes...the logo appears...but when i press the android logo from the screen.. the touch screen dosent work..i can not start..only with buttons..and after pressing buttons..get over wizard..the phone need SIM PIN..but i can not typed.
please help
i changed BORAD PANEL in 1,2,3 and in 2,3 is black screen.
please help me
You have to disable pin code before installing.
For the screen problem look in kernel thread...
waiting for not busy
What about "waiting for not busy" - im2c error ?
The only Zimage working for my pola100 it's an old 29-04-10 Version !
I am very disperate!
Bye !
touch screen dosent work
foxct2005 said:
What about "waiting for not busy" - im2c error ?
The only Zimage working for my pola100 it's an old 29-04-10 Version !
I am very disperate!
Bye !
Click to expand...
Click to collapse
Dear All,
i tried and deactivate the PIN of sim card..read all posts from previous thread that you gave me..but nothing..
all ok..
bootin..starting..apears the logo and final...
before i need to press the screen, appears a message ''Android system stop responding..and a button FINISH"...after pressing finish, i need to press the middle of the screen on the android logo and nothing, only 2 buttons Emergency Call and Choose Language. to can press these 2 buttons, i use the buttons and i can press them..but touch screen do not working.
please all of you..the masters of this softwares..give me a solution.
thx
Try to reinstall the system...
(rename /andboot/install-seq-disabled.sh to /andboot/install-seq.sh and boot)
touch screen problem
l1q1d said:
Try to reinstall the system...
(rename /andboot/install-seq-disabled.sh to /andboot/install-seq.sh and boot)
Click to expand...
Click to collapse
hi there..
i solved the problem..i took an older Z image..and working fine
the problem is that more applications like camera..media player screen adjust don't work..
they try to run..(i mean ..in camera..i can see..but appears a messages with stop working..sorry). i don't know why..
nothing work well
and what about the contacts..how can i get them from my Sim card?
i don't know..
if you can help me will be great.
thx allot for yours assistance.
best regards.
The information from sim card are very limitated (neither pin code works) so if you want to export contact sync before starting with google and configur your google account on android.
old zimage are full of bugs and all developers install android on nand so starting android from haret has many unfixed bugs.
I've been playing around with the haret install for a week or so now, and I've found that, for me at least, it makes a huge difference which initrd.gz file I use.
The one dated 22-05-10 doesn't let me install any zImages newer than 29-04-10. After trying all sorts of combinations of base files with different dates (haret, zImage) and additions to the default.txt, changing the initrd.gz file to the one dated 20-02-10 fixed most of my problems and lets me install the most recent zImage files without a glitch.
No clue why, just that it works.
I'm running a Pola100 with the original WM6.0 ROM still on it, and radio version 1.58.25.14. Yeah, I need to upgrade to at least the official WM6.1 ROM and probably something better. But I'm a newbie at this, so I need to work up some courage first ;-)
hello,
I tried to install android on sd following your instructions, everything seems to go well until the screen where it says:
"Welcome to htc vogue Frøya
touch the android to begin "
I'll try, but the touch does not work, I tried using the d-pad, which does work, but I can only select the language and the emergency call.
zImage as I used: zImage-Frøya-15-07-10
androidinstall.tar as I used: Incubus26Jc's Super Frøya RLS11 Themed
please help me because I would switch to Android!
thanks
Try with latest kernel version on kernel (i release it yesterday)
l1q1d said:
Try with latest kernel versin on kernel (i release it yesterday)
Click to expand...
Click to collapse
where can I find it?
thanks
I tried it unsuccessfully. Boot starts regulary, always ending on repeating error, looping forever.
I can read something like:
==============
ERROR no local apt for prog ... replying anyway
...
Setting function 4 for gpio ... that I don't own
==============
Is it related to which system file ? Loader? Kernel ? Or what ?
Thanks
What did you use for your installation?
I used the files mentioned at the very beginning of this post.
Regarding zimage: zimage-24-05-10
Like i've posted in the setup thread from Liquid, this setup is the best i've tried until now, the only one that make missing call an old history in fact
Another better than ever pola 100 nand / nand setup
Download rom (5.5 version - 6 doesn't work with polaris kernel) : Scoot CyanogenMod (RLS5.5) [16.03.2011] and put it on your sdcard in a directory named andboot (at the root level)
with atool download the latest 2.6.32 kernel, modify it as desired
flash your unlocked phone following this tutorial or use atool scripting ability
update needed : none
work : everything except camera !!!! very smooth and very reliable(no missed call for 1 week, that's a revolution) and not so bad battery life
finally, development kernel seems to be not so far from "ready to production" status, with even better nand stability
we're waiting rom update and next krazykilla's kernel with polaris support, for a better stability and ability tu put data on ext4 partition
Thank you to scooter, liquid nr2jt and all androidhtccrew for their tuff work
Nand is not perfect and run corruption sometime that crash your setup : use the nand startup "backup/restore" data ability after you have configured your rom and favorite applications, to avoid loss of everything : it will create a 256Mb image of nand memory in your SD card /andboot directory that you can restore later in case of crash.
you can increment this backup later if you are happy with future modification of your rom
TIPS : noticed that setup as it is is good enough, people at cyanogenmod know their business
- Tip 1 : in atool, you can try to increase advanced battery capacity to improve accuracy because N2jrt has noticed battery calculation is not good and there's a correction factor of 1.6 to apply (i put 1900 but you can increase to 2200 in theory)
- Tip 2 : you can download Roguetool from the market to overclock your phone
- Tip 3 : try the app named killerauto from the market, it does a very good job with very comprehensive settings to free your ram in real time (and increase battery life)
- Tip 4 : In cynogenmod parameters/performance : check the "keep home in memory option" and activate compcache (10%) to get better result - i don't activate JIT
- Tip 5 : i've noticed that's the battery widget is cause of some trouble sometime, you can get rid of it in this case
what's next
- make polaris' atool development kernel compatible with release 6 : thx to scooter and liquid by advance
- Make crazykilla kernel with ext4 support available for polaris (release from his #54 thread doesn't work for me) or maybe unified every kernel to get the best one
crazykilla's kernel is a usual kernel without the polaris support compiled, i don't know why the #54 version don't work and i can't test it anymore (my polaris has a toasted nand).
l1q1d said:
crazykilla's kernel is a usual kernel without the polaris support compiled, i don't know why the #54 version don't work and i can't test it anymore (my polaris has a toasted nand).
Click to expand...
Click to collapse
i get the error message
"install module for this kernel
apply modules/androidupdate.tgz
Failed
from sourceforge"
maybe i missed something
Blinking screen
I've tried it with my XDA Orbit II and all I get is the white blinking screen after running haret. It's written in the man that it takes a lot of time, so I left it and went to sleep When I woke up, the screen was still blinking the same way and had to remove the battery to reboot. WM booted fine, there were files system.img and data.img created on the microsdcard of the size of 300mb (I don't want to flash it on NAND as it is my first attempt to install new software on phone). I tried Froyo, now trying Eclair and after an hour it looks the same. What might be wrong? Should I try stable kernel or other setups?
Krysiul said:
I've tried it with my XDA Orbit II and all I get is the white blinking screen after running haret. It's written in the man that it takes a lot of time, so I left it and went to sleep When I woke up, the screen was still blinking the same way and had to remove the battery to reboot. WM booted fine, there were files system.img and data.img created on the microsdcard of the size of 300mb (I don't want to flash it on NAND as it is my first attempt to install new software on phone). I tried Froyo, now trying Eclair and after an hour it looks the same. What might be wrong? Should I try stable kernel or other setups?
Click to expand...
Click to collapse
i don't know such setup sorry, i work on nand only to get real speed
I don't want to try flashing on NAND until I find a setup that would satisfy me and work well as I would in practice lose the phone for some time while trying to make it work. So far I've succesfully installed this, but I can't make the PIN code work. I tried to disable it in WM in phone settings, but when I do it, it requires me to enter the PIN, and doesn't accept it, just as Android does :/ Does the PIN code problem occurs in NAND installation as well?
this setup is really not ready. i tried so many times and it always hangs and at the end you'd be reinstalling the system back. I'm sticking back to the Not-So-Super-Froyo setup and has since found it to be very very stable although no camera and no GPS working on it. Just a bit of tip to all those who try and occasionally reinstall, after you have found a good stable setup, install your basic favorite apps and games, then get reboot the phone, access the Android Boot Menu and choose Backup Data on the choices. The system will save your stable setup on an image file on your sdcard. So anytime you have a system crash, you can just choose to Restore Data from the Boot Menu. Saves you a lot of installation.
arzakem said:
this setup is really not ready. i tried so many times and it always hangs and at the end you'd be reinstalling the system back. I'm sticking back to the Not-So-Super-Froyo setup and has since found it to be very very stable although no camera and no GPS working on it. Just a bit of tip to all those who try and occasionally reinstall, after you have found a good stable setup, install your basic favorite apps and games, then get reboot the phone, access the Android Boot Menu and choose Backup Data on the choices. The system will save your stable setup on an image file on your sdcard. So anytime you have a system crash, you can just choose to Restore Data from the Boot Menu. Saves you a lot of installation.
Click to expand...
Click to collapse
Yes i've read this technique somewhere, maybe i will try it next time
thank you for the tip anyway
Krysiul said:
I don't want to try flashing on NAND until I find a setup that would satisfy me and work well as I would in practice lose the phone for some time while trying to make it work. So far I've succesfully installed this, but I can't make the PIN code work. I tried to disable it in WM in phone settings, but when I do it, it requires me to enter the PIN, and doesn't accept it, just as Android does :/ Does the PIN code problem occurs in NAND installation as well?
Click to expand...
Click to collapse
yes if i remember well my past haret experience, i had to deactivate PIN in WM to make android work
arzakem said:
although no camera.
Click to expand...
Click to collapse
what kernel do you use ? i use liquid's 2.6.25 + kernel update
I finally follow your advise and came back to "not so super" and begin to use the "backup data" function...
The best setup so far
I've tried deactivating in WM, but that doesn't work as I've written above. I also tried to disable PIN using my friend's LG AT&T and it didn't work either so I guess I have to try some PC software or go to my service provider and ask them to do it. Thanks for replies.
chourmovs said:
what kernel do you use ? i use liquid's 2.6.25 + kernel update
I finally follow your advise and came back to "not so super" and begin to use the "backup data" function...
The best setup so far
Click to expand...
Click to collapse
lol i've read about the 2.6.25 working camera several times yet i chose to follow the blunt idea that "everything current is best ever" setup.
Anyway ill follow your advise now hehe and finally will have a working camera back again. anyway we have a backup hehe. Thanks man!!!
by the way, i liked your post title a lot haha.
arzakem said:
anyway we have a backup hehe.
Click to expand...
Click to collapse
yeah that's why i try other roms today (i'm in a rom rush ) to see if situation is better with backup trick
i saw the great nr2jt say in a topic that he save is data every morning to prevent its loss
that's why i give another try with scoot 5.5 with liquid's 2.6.32
Hey liquid do something for us to use 6 release
post 1 updated
After numerous builds+kernels, loads of frustration (and the inevitable revert to wm for a while) I think I like this setup. Simplicity at its best, Scoot CyanogenMod (RLS5.5) and latest 2.6.32 from atools as per 1st post. Just re-purposed the camera button as 'home'. Even my headset works, albeit intermittently.
Which settings for ATools for pola200?
Hi,
i tried to install this rom on my german pola200. But on the Linux Bootscreen the text is scrolling down and sayes that it installs the rom. But than it scrolls down error messages.
I tried this for houres but it shows no final error or something. The Text is scrolling on and on.
So i think that i used the wrong settings in atool. I used this tutorial to set up atool: http://sourceforge.net/apps/trac/androidhtc/wiki/HowToInstallWithAtoolsNand
What settings should been used?:
- What version to select?: Donut, Eclair or Froyo?
- Best settings for sd-card-partition? I used first partition 3 gb fat32, second partition 1 gb ext2.
- where should i install system and data? Both on second sd-partition? Or should there be a third partition? (the first time i tried to install the system on intern memory but install runs out of space)
Can you please explain the right settings in atool?
best version is froyo.
to choose sd-card partition, you must have your sdcard PREPARED beforehand. Atool does not partition your sdcard for you. As of what to use to partition your sdcard you can search it at google. (im sorry im a little bit short on time now). choose NAND on both system and DATA.
atools has sd partioner inside so you can repart sd card (boot script editor Y), but the sdcard must have only one partition on it (fat32).
i stand corrected thanks l1qu1d.