Hey guys, i wanted to add some customizations for boot screen and icons also. Hope you like it. For boot screen, just replace this files with the ones inside the windows folder. Thanks to emse_186 for his nice work
If you want animation, use the file in below link instead of the one in the first post
http://www.4shared.com/dir/p3EzMQpP/sharing.html
i put the file from the second post in windows folder,and after restart nothing happens
Ombre1 said:
i put the file from the second post in windows folder,and after restart nothing happens
Click to expand...
Click to collapse
don't just save the picture, download the file from the link above the picture and use it.
victor79 said:
don't just save the picture, download the file from the link above the picture and use it.
Click to expand...
Click to collapse
yes,this is exactly what i make , but it doesnt work . "animated.gif" is in Windows folder but after restart-nothing appears
Ombre1 said:
yes,this is exactly what i make , but it doesnt work . "animated.gif" is in Windows folder but after restart-nothing appears
Click to expand...
Click to collapse
Then, i think animation is disabled from registry. If you use any software for tweaking (bsb tweak, sktools etc.), you may check it if there is any option to enable boot animation.
I try with SKtools but nothing ,there is no option to on/off boot animation.maybe i need to rename the fail?!?or to install something?
I copied the animated.gif file to \Windows, and enabled animations in BSB Tweaks (I had disabled it before) but it is the standard animation that runs, not this one.
Which ROM did this animated.gif work on? Because perhaps there is a difference in how the different ROMs look for this file (I think, if it was already using animated.gif, then there should have been a prompt about overwriting the file)
/Sifaan
sifaan said:
I copied the animated.gif file to \Windows, and enabled animations in BSB Tweaks (I had disabled it before) but it is the standard animation that runs, not this one.
Which ROM did this animated.gif work on? Because perhaps there is a difference in how the different ROMs look for this file (I think, if it was already using animated.gif, then there should have been a prompt about overwriting the file)
/Sifaan
Click to expand...
Click to collapse
Maybe animated.gif dont work with official roms?!?
Ombre1 said:
Maybe animated.gif dont work with official roms?!?
Click to expand...
Click to collapse
I am using Arto's 2.8 21903; the default windows animation is working; but probably the file is embedded somewhere rather than being visible as animated.gif...
which ROM are you using?
3.003b.00.EN maybe this is the reason i cant use animations
I can use the animation but need to rename first. {startup480-800}. But for the first post image cannot be use because the size is wrong, should be 480x800 not 384x680
Hey guys !!!
use JWMD icon changer !
in program
menu>bonus features>change animated bootscreen
Animated bootscreen with sound
I m using this thing. It changes bootscreen to the animated WITH SOUND! (sound like Windows 7 PC logon). All thanks to the Xakep from acer - club . ru [i still can't post links, it's moderator's fail , so i used spaces here], it is his job.
Forum doesn't able to show .gif files, so u can find it here (dont forget to delete all spaces):
h t t p : / / s48 . radikal . ru / i122 / 1006 / 6a / 0cfa0d4e290e . gif
Related
Hi,
I have small problem with this ROM. If I want to install digital clock like Diamond have the Touchflo2D never start again after soft reset which installation of the digital clock want.
I have tried 3 different clocks with the same result.
Can you send me link for working digital clock for this particular ROM ROM 6.1 build 20755.1.4.0 ML.PV by microlab PDAVIET ?
M.
marek1 said:
Hi,
I have small problem with this ROM. If I want to install digital clock like Diamond have the Touchflo2D never start again after soft reset which installation of the digital clock want.
I have tried 3 different clocks with the same result.
Can you send me link for working digital clock for this particular ROM ROM 6.1 build 20755.1.4.0 ML.PV by microlab PDAVIET ?
M.
Click to expand...
Click to collapse
Sounds like a HTCHomeSettings.xml mismatch issue.
If your going to update any 2D theme make sure you use the new themes HTCHomeSettings.xml or adjust the original one accordingly.
Check the developement & Hacking section for more help.
HTCHomeSettings.xml
Hm, but this file HTCHomeSettings.xml is already inside this ROM and I cant delete it. It always shows me "You cant delete it". How can I delete it ROM files ?
marek1 said:
Hm, but this file HTCHomeSettings.xml is already inside this ROM and I cant delete it. It always shows me "You cant delete it". How can I delete it ROM files ?
Click to expand...
Click to collapse
You can only over write it, first turn off 2D from the today menu and then copy your new xml file to the windows directory.
im having trouble with that too! everytime i try to edit an xml file, I try to copy it to my windows directory and i always get an error message. and it just copies it and doesn't replace it
fuenbry said:
im having trouble with that too! everytime i try to edit an xml file, I try to copy it to my windows directory and i always get an error message. and it just copies it and doesn't replace it
Click to expand...
Click to collapse
Make sure you turn off 2d in /setting/personal/today/
Before trying to change the xml file.
TOUCHFLO2D files
Yes. I have the same problem I cant edit the XML file because ALL TOUCHFLO 2D files are inside ROM that's why nobody can makae any modification. It could be solved if every ROM files will be unlocked for editing and deleting. Please, Can someone UNLOCK ROM files ?
marek1 said:
Yes. I have the same problem I cant edit the XML file because ALL TOUCHFLO 2D files are inside ROM that's why nobody can makae any modification. It could be solved if every ROM files will be unlocked for editing and deleting. Please, Can someone UNLOCK ROM files ?
Click to expand...
Click to collapse
Why would you be deleting any of those files in the first place? Download TotalCommander or Resco, shut down TouchFlo (as Ttran has stated twice now), edit or overwrite old files on phone, turn TouchFlo back on.
marek1 said:
Yes. I have the same problem I cant edit the XML file because ALL TOUCHFLO 2D files are inside ROM that's why nobody can makae any modification. It could be solved if every ROM files will be unlocked for editing and deleting. Please, Can someone UNLOCK ROM files ?
Click to expand...
Click to collapse
Frankly,i don't understand what you want when you opened this thread.
any problem every to become simple,i not demand anything from you because sharing this here.
Thanks ttran001 for support.
Digital clock
My problem is that If I install digital clock for MANILA2D it doesnt run. I have to again recopy the HTCHomeSettings.xml, but after that I again have the anolog clock. Where is problem ? I had original WM6 ROM and Manila 2D installed the digital clock worked fine but I havent any free device storage free. That's the reason why I had to flash the original ROM.
You can try change with M2D customizer v0.11,hope it'll help you.
nhatt said:
Frankly,i don't understand what you want when you opened this thread.
any problem every to become simple,i not demand anything from you because sharing this here.
Thanks ttran001 for support.
Click to expand...
Click to collapse
No problem bro, we are all one big family here at xda.
digital Clocks for this ROM
OK, I had to modify HTCHomeSettings.xml file. It took me 1 hour and now I am lucky.
Copy all files to \Windows.
Hi guys!!
I have a question...
My question is can i somehow remove my
startup picture when phone boots up??
Im using now Zeeshans 96 dpi rom, and no offence
but hes name appears big when i boot up phone, so
how is it possible to remove it??
Cheers
The first or the second?
Not the windows logo, another picture displays right after it
It's the second splash screen.
See here its name :
[HKEY_LOCAL_MACHINE\System\Startup\1]
"Splash"=...
or
[HKEY_LOCAL_MACHINE\Software\HTC\Startup]
"Image"=...
Replace image with another one.
Bye.
and forgot to ask...
HOw do i acess registry in phone??
On Vox :
* Total Commander
or
* PHM Registry Editor
On PC (Vox plugged) :
* Ceregeditor
Bye.
ive installed and searched after the registry, couldnt find
any of them that youve typed m8
Couldn't find what ?
[HKEY_LOCAL_MACHINE\System\Startup\1]
"Splash"=...
or
[HKEY_LOCAL_MACHINE\Software\HTC\Startup]
?
If you can't find startup, i don't understand...
i cant either find startup under System or HTC maps
Make a regdump, attach it on your post, i'll see if if find pictures.
(use Regdump.exe)
http://dillsoft.com/index.cgi?program=RegistryDump-PPC
Bye.
i found the file, but could delete it
Found in reg ?
i mean, i found the file in Total commander, but wasnt able to delete it, and in registry i couldnt find the registry key
What is the name of file ?
carrier_splash.png
Try to replace this file with another png.
Bye.
Still cant do it....
I couldnt find nething like splash/ image in the reg file.
I have fireburned custom OS 1.0 nd wish to change the splash screen( no offense LeFab47; I love ur OS, but wish to customize it)
It is named startup.gif and is located in the windows folder
akshayc1111 said:
I couldnt find nething like splash/ image in the reg file.
I have fireburned custom OS 1.0 nd wish to change the splash screen( no offense LeFab47; I love ur OS, but wish to customize it)
Click to expand...
Click to collapse
cant believe myself guys , PLEASE , tell me how to change my welcome screen , i've downloaded a cab named "EMSE Windows Phone animated (QVGA)S.Black" , and so what ? install or i've seen some advices to change .png or whatever in the system folder with Total Comander ... some1 guide me through the fog fast and clean ;]] and let this thread run fast downstairs...
i got the cab from some thread , and i can upload it in this one if anyone needs it ... ?
Hey LtBlue, there is something wrong with his registry settings, they not correctly setting the files on some devices, you'll need a registry editor, active sync your phone and run the reg edit from your pc and change the following:
HKLM\Software\HTC\HTCAnimation :
StartupGif - \Windows\animated.gif
HKLM\Software\Microsoft\Splash Screen :
CarriereBitmap - \windows\welcomehead**.png
MSBitmap - \windows\welcomehead**.png
Click to expand...
Click to collapse
the ** means the number at the end of the name of the image, dont put "**" cos it wont work.
I am trying to compile new rom for i637 out of original AT&T 6.5 rom, Telcel Mexico 6.5 rom and Chinese ROM. There are few things i'm interested in changing and I was wondering what can i find in eboot.eb0, pda.pda and phone.bin files. What do they do. What do they contain. WHAT IS WHAT?
Since someone wrote that in csc file there's language and keyboard and stuff I wanted to flash the phone with mexican pda file but with us csc so the keyboard won't get changed.
Can anyone please help me figure this out. Is there a way for me to extract csc from official AT&T updater.exe?
If anyone can explain it to me please keep it simple and clear cause it's my first attempt.
Thank you
Edit: Can you please tell me how to extract fiiles from AT&T updater. It's called MSM7X00 Unified Downloader.
http://ars.samsung.com/customer/usa...ID=2&PROD_SUB_ID=557&PROD_ID=558&AT_ID=177858
I have a similar question.
I was wondering if there is a possibility that any of the files used to flash the BenQ E72 could contain the Splash image that comes when you turn on the phone...
I'm using Windows Phone 6.5 on my E72, but everytime I turn on the phone I see tha old Windows Phone 6.0 splash image...
That picture is not inside my Rom, so I guess it must be located in one of the files used to flash the device... I'm attaching these files to see see if someone more knowledgeable can tell me if there is an image within those files! Thanks!!
can anyone help me? I'm sure somebody knows...c'mon brainiacs
nickleby said:
I have a similar question.
I was wondering if there is a possibility that any of the files used to flash the BenQ E72 could contain the Splash image that comes when you turn on the phone...
I'm using Windows Phone 6.5 on my E72, but everytime I turn on the phone I see tha old Windows Phone 6.0 splash image...
That picture is not inside my Rom, so I guess it must be located in one of the files used to flash the device... I'm attaching these files to see see if someone more knowledgeable can tell me if there is an image within those files! Thanks!!
Click to expand...
Click to collapse
that file is in your ROM, but not as a .jpeg or some picture file.. There is a registry key that directs to a .dll file which contains the Splash Logo!
If you want to change the Splash Logo for any custom one, take a look in here:
http://forum.xda-developers.com/showthread.php?t=769651
This is a Mortscript based Program
- Menu GridView to ListView
- Menu ListView to GridView
- Hide Menu Labels
- Show Menu Labels
- Change Startup Splash Logo
- Change Shutdown Splash Logo
- You can use any JPEG file with a 320x240 resolution
- You can also use the files in the \Windows directory, permission doesn't make sense (hidden, read only, archive)
In order to use it, you must download Mortscript: the link is in the same thread!
nickleby said:
I have a similar question.
I was wondering if there is a possibility that any of the files used to flash the BenQ E72 could contain the Splash image that comes when you turn on the phone...
I'm using Windows Phone 6.5 on my E72, but everytime I turn on the phone I see tha old Windows Phone 6.0 splash image...
That picture is not inside my Rom, so I guess it must be located in one of the files used to flash the device... I'm attaching these files to see see if someone more knowledgeable can tell me if there is an image within those files! Thanks!!
Click to expand...
Click to collapse
If you want to cook again with the right Splash Logo, use this resource:
You can only use a .jpg picture with a 320x240 (only for QVGA) resolution.
Place the file in \Application Data\Home\Your Custom File Name).jpg
Go to this path:
in HKLM\system\startup\1\
delete or backup STRING "DLL" Value "doani_Samsung.dll" (if any - found on remora)
create a new STRING with title "Splash" with VALUE "Application Data\Home\(Your Custom File Name).jpg"
in HKLM\System\Shutdown\1\
delete STRING "DLL" VALUE "doani_Samsung.dll" (if any)
create new STRING with Title "Splash" and Value "Application Data\Home\(Your Custom File Name).jpg"
I've tried all those things long time ago...So I say that the splash image may be contained in one of the files attached, so I'm asking if anyone can help me with that issue please
The old Windows Phone 6.0 image splash appears when I power on the phone...Then appears the Windows Phone 6.5 image splash...As I said before, that picture is not contained in my rom, dll file, etc
After seeing quite a few I <3 Windows Phone themes, I thought we should have something for TG01
So, created some!
EDIT 1:NEW COLOURS ADDED NOW
EDIT 2:LET ME KNOW IF YOU WANT YOUR NAME ADDED TO THE START UP SCREEN - WILL DO INDIVIDUAL CUSTOMIZATION!
EDIT 3:Animated Splash Screen NOW cooked and available with miROM10 (Thanks to mirolg) - Download new super fast, stable ROM with animated start up here
EDIT 4:NEW!!!SLOW ANIMATED VERSION OF YOUR SPLASH SCREEN (animated.gif in attached zip)
EDIT 5:NEW IN 2011 !!NOW PACK COMES WITH 8 START UP SCREENS AND 3 ANIMATED SPLASH SCREENS
EDIT 6:NOW SPECIAL CUSTOMISED SPLASH SCREEN FOR ALL YOU miROM LOVERS
Coming soon! - 2 More animated splash screens in fresh new colours!!
The list of files in upload:
3 animated splash screens
8 still start up screens
I have tested ALL screens and they look cool on WinMo
Requests, Comments, Suggestions are welcome!
*****************************************
How to change the Start Up screen
Choose the file you fancy, rename it to welcomehead.192 and copy it to /windows folder on your device. Restart, Enjoy!
All files are in .png format and if you copy them as it is and just rename them to welcomehead.192, it should work. Please let me know if it doesn't
How to change Splash screen
a) I have also made an animated .gif file if your ROM has a splash screen, you could replace it.
Splash Screen will ONLY work if your ROM already has a splash screen cooked into it. If you are using a custom ROM where splash screen has been removed, then you can't use the animated screen. If you try to install, you won't see any change! Don't worry, it won't brick your phone!
in HKLM\Software\Toshiba\StartupAnimation:
Enabled (DWord) : 1
GIFFile (String) : \windows\animated.gif
Change the one in BLUE to the WM_animated.gif, so that new animation file will be used instead of default 'animated.gif'
Reserved!
For future releases
Reserved!
For list of FAQs and Requests
jeeeah, well done, maestro. looks very gooood!
..ps. i have more as 5x tnx buttons is a xda bug
mirolg said:
jeeeah, well done, maestro. looks very gooood!
..ps. i have more as 5x tnx buttons is a xda bug
Click to expand...
Click to collapse
HAHA!
That's no problem at all, we will write feedback to XDA on the thread and ask them to provide more thanks per day
Miro, if possible, can you please test the animated splash screen on tg01? I can't. I think in your ROM you have removed the splash screen. If I get feedback and suggestions, I am ready to bang out some more of these babies
ha, tnx, again (i find 5x tnx per day is not enough)
yes, no prob. i will test it and i will make a cab with enabling htc animation!
mirolg said:
ha, tnx, again (i find 5x tnx per day is not enough)
yes, no prob. i will test it and i will make a cab with enabling htc animation!
Click to expand...
Click to collapse
thanks a lot miro for helping with feedback n cab
love Miro's ROMs with drupad2drupad's start up screen!
currently miROM 8 with your new startup screen. thanks a lot!
drupad2drupad said:
thanks a lot miro for helping with feedback n cab
Click to expand...
Click to collapse
the standard name is animated.gif pls. rename bevor
the speed of the animated Icons is to high- i think a good value is half from actual speed.
to test: stonROM has enabeld the animated function
(my cab not works . when i cooked in works fine)
drupad2drupad said:
............
How to change the Start Up screen
Choose the file you fancy, rename it to welcomehead.192 and copy it to /windows folder on your device. Restart, Enjoy!
.............
Click to expand...
Click to collapse
It not work om my TG01? I'm with original Orange ROM.
Where I made a mistake?
I choose ".jpg file with 480x800x24 BPP with changed name to welcomehead.192 . I put the file to windows folder on my TG01. After restart, nothing changed.
kapitango said:
It not work om my TG01? I'm with original Orange ROM.
Where I made a mistake?
I choose ".jpg file with 480x800x24 BPP with changed name to welcomehead.192 . I put the file to windows folder on my TG01. After restart, nothing changed.
Click to expand...
Click to collapse
in my case I renamed the file to welcomehead.192.png and then it should work.
good luck!
mirolg said:
the standard name is animated.gif pls. rename bevor
the speed of the animated Icons is to high- i think a good value is half from actual speed.
to test: stonROM has enabeld the animated function
(my cab not works . when i cooked in works fine)
Click to expand...
Click to collapse
Thanks Miro!
I will rename it as well as put it in first post so before install it can be changed.
I will try to flash stonROM tomorrow and see if it works.
Also will put in first post so everyone knows that it will only work on ROMs where splash screen is cooked in!
Thanks a lot for the help my friend
kapitango said:
It not work om my TG01? I'm with original Orange ROM.
Where I made a mistake?
I choose ".jpg file with 480x800x24 BPP with changed name to welcomehead.192 . I put the file to windows folder on my TG01. After restart, nothing changed.
Click to expand...
Click to collapse
gghiq said:
in my case I renamed the file to welcomehead.192.png and then it should work.
good luck!
Click to expand...
Click to collapse
Try changing the name to welcomehead.192.png and it should work. All the files I have updated should be in .png format
WinMo will only use the file if it's in .png format.
Thanks drupad2drupad, welcomehead.192.png is the right name.
But I can't replace the existing file, how I can change the permitions?
kapitango said:
Thanks drupad2drupad, welcomehead.192.png is the right name.
But I can't replace the existing file, how I can change the permitions?
Click to expand...
Click to collapse
u can use an external file explorer like Resco file explorer. In properties of file, untick system and hidden. Once u have replaced the file simply put the ticks back for new file. Hope this helps
Thank You again drupad2drupad.
kapitango said:
Thank You again drupad2drupad.
Click to expand...
Click to collapse
No problem at all Hope you enjoy the start up screen and can show you love for WinMo on your TG01
PS: Please let me know if you were able to successfully use animated start up screen as well
I failure to use animated start up screen.
I'm still amateur in WM customizing.
Now i study the possibility of SKTools.
PS. Now in the start of my TG1 at first display Orange screen and after that show my screen. Is it posible to exchange this Orange screen wih onother my screen?
kapitango said:
I failure to use animated start up screen.
I'm still amateur in WM customizing.
Now i study the possibility of SKTools.
PS. Now in the start of my TG1 at first display Orange screen and after that show my screen. Is it posible to exchange this Orange screen wih onother my screen?
Click to expand...
Click to collapse
You should be able to replace Orange splash screen with animated.gif - animated WM screen in the first post. You need a registry editor like Resco registry editor or total commander in order to make the registry changes I mentioned in first post.
Aha, now I understand. I'll try again wit WM_animated.gif from your first post.