Database Info

[32A][ROM][PORT] ZeroXd 5.1 w/ Amon_RA's v1.1.0 Kernel [Sept. 7 2009]

Original Thread
Credits to TwistedUmbrella and Amon_RA for the kernel ofc!
Casper's Shadow - ZeroXd 5.1 w/ Amon_RA's v1.1.0 kernel [rapidshare]
For Ringtones and other "Extra Stuff" download Resources.zip from oringinal thread. Maybe on next update I'll include them already into the original ROM archive...
Note: Just install normally! No need to type anything into the terminal as the original thread states because this port replaces ramdisk and kernel so no need

Hi thanks for another fine release..aft trying out ur jac release and this rom.. i find this not as fast as the jac one..if u could improve on the jac rom it will surely be an incredible rom..really like the speed and lightness on the jac rom..thanks once again..

I only do the ports This is not my work. I merely repack the files for easier installation and for those that don't have linux

covertless said:
Hi thanks for another fine release..aft trying out ur jac release and this rom.. i find this not as fast as the jac one..if u could improve on the jac rom it will surely be an incredible rom..really like the speed and lightness on the jac rom..thanks once again..
Click to expand...
Click to collapse
HAHAHA, lol, HAHAHAHAHAHA. Wow, hahahahaha. Ok. Sorry. Ok, seriously... anyway... You might wanna throw the kernel on this
Most Recent:
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.1r2.zip
MD5: 0d10525b55ed6c97b7741a70aa113cdb
Execute Terminal and enter the following commands:
rwsystem
magic
This configures the system to the specific device. This is until I finish automation.
LEDs have been restored to 93%
(and delete system/bin/magic and system/bin/sapphire, as they dont affect a swapped kernel)
I think it'll shut this kid up. Unless he has no idea what partitioning an sd card does, in which case this will still be slow. It's based on some newer source and some improved scripts and optimizing. Can't say its faster, but at least itll even out.

L10nH34Rt said:
I only do the ports This is not my work. I merely repack the files for easier installation and for those that don't have linux
Click to expand...
Click to collapse
Okay my bad, anyway what I meant to say was thank you for the effort in porting over for the 32a.
twistedumbrella said:
HAHAHA, lol, HAHAHAHAHAHA. Wow, hahahahaha. Ok. Sorry. Ok, seriously... anyway... You might wanna throw the kernel on this
Most Recent:
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.1r2.zip
MD5: 0d10525b55ed6c97b7741a70aa113cdb
Execute Terminal and enter the following commands:
rwsystem
magic
This configures the system to the specific device. This is until I finish automation.
LEDs have been restored to 93%
(and delete system/bin/magic and system/bin/sapphire, as they dont affect a swapped kernel)
I think it'll shut this kid up. Unless he has no idea what partitioning an sd card does, in which case this will still be slow. It's based on some newer source and some improved scripts and optimizing. Can't say its faster, but at least itll even out.
Click to expand...
Click to collapse
Anyway twistedumbrella, are you as what your name describes? Your comments are uncalled for and not needed in this community. Please grow up and get a life. I am new here, so would appreciate if you could give positive feedbacks instead of insults.

@covertless: He is right though... On my magic this ROM is *MUCH* faster than the JACxHEROski one
@Twisted: Ok will throw the kernel and include full instructions based on your post here!
Thank you for your work!
p.s. If I delete /system/bin/magic and /system/bin/sapphire will we still be able to run rwsystem and then magic?

*L10nH34Rt: Great could you release the ported version when its done?
P.S. I am not saying he is wrong, anyway I appreciate that there are people like you and him contributing to this community by working hard on the dev of roms. Not sure as to why he had to assume that non programmers like me are "kids".

Sure I will later today when I get to my linux box

covertless said:
Hi thanks for another fine release..aft trying out ur jac release and this rom.. i find this not as fast as the jac one..if u could improve on the jac rom it will surely be an incredible rom..really like the speed and lightness on the jac rom..thanks once again..
Click to expand...
Click to collapse
Wait, even he says "jac rom"i think he is talkin about older zero releases which are using jac kernel vs new amonra kernel, or is he not? Because there is no hero port who can outperform xero's speed with proper adjustments atm.

Nyanna said:
Wait, even he says "jac rom"i think he is talkin about older zero releases which are using jac kernel vs new amonra kernel, or is he not? Because there is no hero port who can outperform xero's speed with proper adjustments atm.
Click to expand...
Click to collapse
I was referring to L10nH34Rt's port of the JACxHEROski-v1.7r2 w/ Amon_RA's 1.1.0 kernel.
http://forum.xda-developers.com/showthread.php?t=549873

Hero Kernel Released by HTC

http://developer.htc.com/

Cool beans.

magic dream n hero kernel source !!
fun time
woot

about time....this is great news

Does this mean that we can finally get bluetooth working in the Hero ROMs?

+1
Me want blutuuut
Well Certaily this is something only a developer could answer.
Hello anyone...

Me Likey Bluetooth...
To my knowledge, we were waiting on the sense ui from magic, not hero. If we get the sense ui from magic then it can be ported to dream with working bluetooth.

Yes... it's a link to the HTC Developer website... not that most developers don't know when things like Kernals going up happen...

Se can anyone actually explain what does this mean for us simple and humble peasants ... pardon users...

@axlastro
I'm also curious to know what this means for the future of HERO ROM's, if anything...

This is exciting news indeed.
Backport BFS time.

axlastro said:
Se can anyone actually explain what does this mean for us simple and humble peasants ... pardon users...
Click to expand...
Click to collapse
Bug Fixing, customizations, and security mainly. Also brings forth the possibility to get around security locks on apps and such(htc widgets) not this in particular but a source code in general.

When SenseUI Sapphire comes out it will most likely have a new kernel.
We need to request it!

This has been out for about a month and won't really help us much. The HTC kernel source tree was always available via git so HTC providing a link on their website doesn't change much.

shafty023 said:
This has been out for about a month and won't really help us much. The HTC kernel source tree was always available via git so HTC providing a link on their website doesn't change much.
Click to expand...
Click to collapse
HAHA thank god somebody ended this pointless hubub..........
Maxisma is right one post above this.. We need the sapphire sense UI one

kingklick said:
HAHA thank god somebody ended this pointless hubub..........
Maxisma is right one post above this.. We need the sapphire sense UI one
Click to expand...
Click to collapse
That's not true. This code was not publicly available, eg. we did not have board-hero.c.

Does that mean we can port Hero's flash onto Dream?

adrianmole said:
Does that mean we can port Hero's flash onto Dream?
Click to expand...
Click to collapse
no.
10char

adrianmole said:
Does that mean we can port Hero's flash onto Dream?
Click to expand...
Click to collapse
No. Hero flash is a plunging for the browser which, correct me if I'm wrong, relies on the HTC framework. I believe there are other libraries and quagmire that only hero have making it necessary to have a hero Rom. Just be patient. By early to mid 2010 we will have our Android flash beta. That's completely off topic but the answer nonetheless.

hero with donut
SG_Shadow said:
I'm also curious to know what this means for the future of HERO ROM's, if anything...
Click to expand...
Click to collapse
hopefully that means the hero roms will incorporate all the 1.6 donut improvements soon.....(as i am impatient, soon is not soon enough......

[Devs] WG-Kernel 2.0

Hey with this new kernel that has been really impressive to me
I want to work with any Devs out there to bring this kernel to them for testing
I think a lot of people would really like it since it has choices for CFS/BFS RHack/NoRHack
So, if any devs want to work with me on bringing this any build - email me
[email protected]
Hopefully, I want to create a kernel for everyone to use - I know CM's has been more popular for its features - but this one has the features plus a really good speed
I would really like to work with any Eclair Devs to improve the speed of this before I make my Eclair ROM (sooner or later - may need a break first for life lol)
I was really behind on this working on the kernel way too much - so 2wks behind

wesgarner said:
Hey with this new kernel that has been really impressive to me
I want to work with any Devs out there to bring this kernel to them for testing
I think a lot of people would really like it since it has choices for CFS/BFS RHack/NoRHack
So, if any devs want to work with me on bringing this any build - email me
[email protected]
Hopefully, I want to create a kernel for everyone to use - I know CM's has been more popular for its features - but this one has the features plus a really good speed
I would really like to work with any Eclair Devs to improve the speed of this before I make my Eclair ROM (sooner or later - may need a break first for life lol)
I was really behind on this working on the kernel way too much - so 2wks behind
Click to expand...
Click to collapse
are you saying that it has the same features as the CM kernel, but it's faster?

prince.siraj said:
are you saying that it has the same features as the CM kernel, but it's faster?
Click to expand...
Click to collapse
That's what it looks like.

Need this in a Hero ROM

Would love this for SuperD.....

hey i just tried out your kernel on eclair. i used your kernel from 2.6 cfs w/ ram hack on my custom speed demon build of eclair using manups ramdisk and i am unable to pass splash screen. prolly needs more implementation of eclair goodies

What files did you "transplant" to use the kernel on another build?

u must unpack the boot.img's then replace kernel

Hero_Over said:
u must unpack the boot.img's then replace kernel
Click to expand...
Click to collapse
THanks, Im gonna do some experimenting on a 1.6 build later

Anyone else trying this kernel on Eclair other then Herver?
I'm waiting to switch to Eclair until a fast/responsive kernel is implemented.

Tried BFS/RAMHACK with Manup's Eclair ROM, kernel loaded properly, ran quickly, only issue was that bluetooth didn't work.
My issue with all these different kernels out there, is that I'd like to see source code accessible, or at the very least, maybe attach the .config file, so I know what exactly has been changed.

Ok lol who wants for what ROM?
You have to grab a few things from it - such as the rootdir plus setup xbin if it doesn't use it

hi wes.
i would certainly like to help the cause and assist in improving upon things (where possible and if feasable), but i would really need to see the source and .config to make advancements.
is this available on your github?

you're handing these out pre-built? Do you have somewhere we could download the source?

Figured I'd test it, and figured it wouldn't work...
The kernel (CFS + ram hack) doesn't work as a direct drop-in on dwang.

wesgarner said:
Ok lol who wants for what ROM?
Click to expand...
Click to collapse
You should do one for hero/espresso.

wesgarner said:
Ok lol who wants for what ROM?
You have to grab a few things from it - such as the rootdir plus setup xbin if it doesn't use it
Click to expand...
Click to collapse
If you wanna help me, then

g'day Wes,
like the rest - I am curious to know if it possible to see the source and the .config? Is there anyway you could make this available? thanks in advance mate...
peace..

bump for update dammit. Donut is still ALive!

R3N0V4D0 said:
bump for update dammit. Donut is still ALive!
Click to expand...
Click to collapse
No it isn't, go back to sleep and don't be bumping ancient threads.

[STOPPED][ROM][32B;G1]DarchLegend[Fast][WG kernel]

First thank to all dev's! Particulary bcrook and sanpei.
Original link
Hi,
after many test and hours, here is my second ROM!! I will port villain's ROM tomorrow, I can0t active wireless connecionts on this ROM!
really, it is a port of DarhLegendv5.0.5 , ported to 32B (and G1 perfect SPL too(?))
To port this, I've used a WG kernel with RAM hack.
Partition Layout: Fat 32 ;; EXT 2/3/4 ;; SWAP
Wipe : data/factory reset, dalvik-cache, SD:ext partition
So, the links..!:
DarchLegendv505.Artifexed.v01.BETA
works:
most things!
don't work:
wifi, BT, camera
Change Log:
v01 : BETA release
Thank to say what you think about this port!

Whats the point of announcing a ROM without actually announcing anything other than the fact it is coming ? Seriously ..
No offense or anything .. thanks for putting time and effort into building a rom.. just saying that this thread is kind of pointless if you're not actually announcing anything ..

He's announcing the announcement

look there goes santa with the 2.1 update
shawn1224 said:
He's announcing the announcement
Click to expand...
Click to collapse
Ive noticed alot of devs have been doing that in the cdma hero forums. Kinda like how tmo, sprint, at&t tell you your gonna get 2.1 update except this is actually gonna happen.

if the rom didnt have a release date then say something but since its tomorrow then just chill i am starting to think people join to flame people

all i wanna know is does is it going to fix our tethering problem.

Aeikozz said:
all i wanna know is does is it going to fix our tethering problem.
Click to expand...
Click to collapse
it should I know i got it on sprint hero but i dont know what is gained or lost in a port. I do want to add thankyou to the devs that make roms cuz I know I get sensitive when people say something bad about my work and they just let it roll of them like water. Also I like the idea of telling you when the next release is cuz you aren't stuck in limbo wondering how things are going

how is it going with this production

32B Wifi with Hero ROM
Hi,
anyone can help me?
I can't active the Wifi with DarchLegend on my 32B.
The wlan.ko is OK.
Wich file(s) must I change?
thank in advance

The wlan.ko needs to be built together with the kernel. You can't just take a wlan.ko and stick it in a ROM.

dferreira said:
The wlan.ko needs to be built together with the kernel. You can't just take a wlan.ko and stick it in a ROM.
Click to expand...
Click to collapse
Well basically you can, but then you'd have to use the same kernel build that was used to build that wlan.ko. Every time kernel is compiled, modules for it need to be recompiled with it.

klothius said:
Well basically you can, but then you'd have to use the same kernel build that was used to build that wlan.ko. Every time kernel is compiled, modules for it need to be recompiled with it.
Click to expand...
Click to collapse
Yes, that was what I meant

Artifex14 said:
Hi,
anyone can help me?
I can't active the Wifi with DarchLegend on my 32B.
The wlan.ko is OK.
Wich file(s) must I change?
thank in advance
Click to expand...
Click to collapse
yes, the kernel and wlan.ko correspond.

tethering support must be compiled into the kernel I believe.

Re: 32B Wifi with Hero ROM
ok, so, I don't understand, because I've did it!
Otherwise to change? In init.heroc.rc?
Sent from my Hero using the XDA mobile application powered by Tapatalk

sooo....tomorrow was yesterday

eyegor said:
sooo....tomorrow was yesterday
Click to expand...
Click to collapse
lol yeah was thinking that too

Yes, but I can't active the Wifi......otherwise, the ROM is stable, fast, with compcache,...
I'm uploading a non Wifi ROM, and if anyone can help me, thank in advance (the wlan.ko is right!)

The file is uploaded.

Artifex14 said:
The file is uploaded.
Click to expand...
Click to collapse
Thankyou will let you know how it is

Any Rom(or kernal) with EXT4, Overclocking, JIT, Compcache and working Camera

I'm tired of my Hero lagging crazy. Its hard to use my phone and I'm going to switch if its not fixed soon. I'm looking at Fresh Toast v1.1 with Overclocking, Compcache, and Ramzswap all supported by a .27 kernel which won't allow the camera to work on 2.1 roms but will on 1.5 roms correct? If the camera will work if this kernel is pushed to a 1.5 rom how exactly do I get the kernal on my phone.
Even if this isn't possible try and list the fastest kernel so far with camera features working. Looking at the Kernel list in the wiki doesn't really help...
Please XDA, I once loved this phone.

http://forum.xda-developers.com/showthread.php?t=671670
nice.

98classic said:
no
1234567890
Click to expand...
Click to collapse
tkirton said:
1. You need a 1.5 Rom. Those Roms come with the 2.6.27 kernel (which the source was released). Toast fixed the EXT4 and did the overclock. If you wish, I can build you a kernel with the Rom that you choose for these functions.
2. The HTC keyboard does suck in its lag. I personally like the stock Android keyboard. There's a few developers that incorporate those into their Roms and I know some have them as themes. I'll look for you.
Click to expand...
Click to collapse
aweb31 said:
There's a gumbo 1.5c rom and an overclock here: http://forum.androidcentral.com/htc-hero-roms-hacks/10138-gumbo-1-5c-overclock.html
I'm using it, it's fast as hell and camera works great.
Not sure that you can use ext4 though, but I figure that's the least of my sacrifices.
Click to expand...
Click to collapse
this is a basic summary of the last thread you started on this exact same topic. i guess if you didn't get the answer you wanted then starting a new thread is the best way to figure out the problem.......

:/ ............................................................................................................................................................................................................................................................................................................................................................................................................................................................... :/ ...................................................................................................... ... ... ... ................................................................................................................................................ . .................................................

:/ ............................................................................................................................................................................................................................................................................................................................................................................................................................................................... :/ ...................................................................................................... ... ... ... ................................................................................................................................................ . .................................................
Click to expand...
Click to collapse
+1
Sent from my HERO200 using the XDA mobile application powered by Tapatalk

...honestly?? http://forum.xda-developers.com/showthread.php?t=671670
............................................________
....................................,.-'"...................``~.,
.............................,.-"..................................."-.,
.........................,/...............................................":,
.....................,?......................................................,
.................../...........................................................,}
................./......................................................,:`^`..}
.............../...................................................,:"........./
..............?.....__.........................................:`.........../
............./__.(....."~-,_..............................,:`........../
.........../(_...."~,_........"~,_....................,:`........_/
..........{.._$;_......"=,_......."-,_.......,.-~-,},.~";/....}
...........((.....*~_......."=-._......";,,./`..../"............../
...,,,___.`~,......"~.,....................`.....}............../
............(....`=-,,.......`........................(......;_,,-"
............/.`~,......`-...................................../
.............`~.*-,.....................................|,./.....,__
,,_..........}.>-._...................................|..............`=~-,
.....`=~-,__......`,.................................
...................`=~-,,.,...............................
................................`:,,...........................`..............__
.....................................`=-,...................,%`>--==``
........................................_..........._,-%.......`
...................................,

Wow, are you guys serious? I started a new thread because the last thread consisted of only 1 person recommending some gumbo kernel, I looked at the kernel it has overclocking but no ext4(or EXT3 I think). If your not going to be helpful and your just going to act like idiots don't reply at all. Stop roid raging when I tell you my Hero is too slow and I'm pissed off about it.

tkirton said:
1. You need a 1.5 Rom. Those Roms come with the 2.6.27 kernel (which the source was released). Toast fixed the EXT4 and did the overclock. If you wish, I can build you a kernel with the Rom that you choose for these functions.
Click to expand...
Click to collapse
it seems like tkirton is willing to compile a kernel with these features you want, but just tell him if you want to run a 1.5 rom (camera) or a 2.1 rom (no camera)