Related
All of them that I've tried, thus far.
You MAY NOT see this, by the way, depending on your access pattern, but it is DEFINITELY HAPPENING.
The problem is that its really, really ugly - your card's data is slowly being DESTROYED.
When it hits the "wrong" file, you will find out - the hard way.
This is NOT a "cooked ROM" problem - AT&T's base 6.1 load does the same thing (!)
The EASIEST way to find it is to use Advanced Config to move the IE cache to the card, then play a while. Suddenly the device will lock. You soft reset, and all "appears" well. Its not.
How do I know its damaging data? Because it has scrambled my TomTom map files "just enough" that TomTom comes up "No Maps" (!) - but the file names ARE THERE. The signatures are destroyed - it only takes ONE BYTE of change in the wrong place to do it.
Now what the ##$)! is PIE doing writing in that directory? Its not - on purpose.
The RSS reader will reliably do this too.
If you point them at main memory, no problems. Its SPECIFIC to the SD handler.
Its also SPECIFIC to 6.1 ROMs. 6.0 does NOT exhibit the problem, yet EVERY 6.1 load I've tried can be provoked into doing this.
The only fix is DON'T WRITE TO THE SD CARD via programs. Well.... that's not the WORST thing in the world on a Kaiser as it has a lot of internal memory, but....
Anyone know what the #@#$ is going on here - or have a fix for it?
PS: If you think you're not running into this, don't say I didn't warn you when you find one of your files destroyed without warning. I have run byte-wise compares of SD images and the corruption appears to be almost completely random. And yes, its across both SDHC and non-HC cards (2GB) - both are hit by it, and I've got three, all from different manufacturers. This is VERY reproducable and its not hardware either since 6.0 does NOT exhibit the problem.
Quite interesting... which rom build are you using ?
Have tried several - the most recent being the Hyperdragon 11/15 build.
The stock AT&T 6.1 build did the same thing as soon as I switched PIE's storage to the card. Its not instantaneous but if you browse for a significant length of time it WILL do it.
Flashed to 3.29 HardSPL to be able to load the various cooked ones here, all that I've tried so far do the same thing. Flash back to 6.0 AT&T, no problems.
VERY consistent.
I just put 3.28 HardSPL on to see if that changes anything. Can't imagine why it would, but....
Its pretty subtle if you don't browse heavily - if you get a "lockup" with PIE while its set to write to the card YOU ARE SCREWED. You may not know WHICH file got smashed but I guarantee one did. If it smashes the MFT then the fun really begins (the entire card's contents are gone), but I would prefer that to a RANDOM file getting destroyed!
I have run sector-by-sector compares and have found that where it "scribbles" when it happens appears to be completely random.
And again - 6.0 does NOT do it, and if you only READ from the card, its fine.
I suspect that its a "per-event" risk and so anything that runs from the card and writes data back there EVENTUALLY will screw you - its just a matter of time.
Genesis3 said:
The EASIEST way to find it is to use Advanced Config to move the IE cache to the card, then play a while. Suddenly the device will lock. You soft reset, and all "appears" well. Its not.
...
Click to expand...
Click to collapse
thats why it is strongly recommended NOT TO store ie cache to storage card. Keep it on device memory. There is no fix for this problem yet except keeping ie cache on device.
Sounds pretty easy to bypass the problem, eh? Don't store stuff to the card. No big deal. I mean, c'mon, it's not like we're going to run out of memory storing the IE cache on the device.
Beside that, it must only be IE as I've always used the card to store my email and attachments and have never had a problem. However, I am using a 16GB card...perhaps that makes a difference. I've been running various 6.1 ROMs (including some questionable betas) for almost a year now and have experienced ZERO corruption. Also, if it makes a difference, I perform so much data transfer with my card on a weekly basis. Pretty much filling and emptying about every third day.
It is NOT only IE.
The RSS reader that is in there (RSSHub) that HTC stuffed in the later roms does it too.
I managed to trigger it last night with RssHub; thinking IE was the only culprit cost me (another) reload of my SD card.
Be careful - if its per-event risk then ANYTHING you store on the card (e.g. pictures, etc) could cause it, and apps like TomTom that write places you set as destinations to as a cache can cause it too - its just that being data dependant the more often you write, the higher the risk.
BTW this is a 6.1 issue that does NOT affect the Wizard - I have had a custom (I cooked it) 6.1 ROM on my Wizard for six+ months without a single screwup. But I've yet to find a 6.1 ROM for the Kaiser that DOESN'T have this problem.
BTW, is there a 6.1 ROM around WITHOUT the new PIE? God I hate the new format on that thing...
I have been beating on PIE stored on the card, plus RSS stored on the card now for over an hour - after loading HardSPL 3.28 (was running 3.29) and SO FAR I haven't had it happen.
Now this doesn't mean much, but that I got a solid couple of hours in without it blowing up - when I was pretty reliably able to do it previously - might be significant.
Or maybe not.
I'll run this way for a week or so and see if I can get it to misbehave.... I have card backups
yah i have learnt to back up my sd all the time cause im CONSTANTLY getting corruption..but corruption i can see like messed uop names and folders which ive found more consistant when i have sd power settings set to enabled in advanced config..
I have also witnessed RSSHub destroying my card several times
I remember this problem when WM5 came out on the Artemis. It was linked to the power state and the device going into sleep mode. It never occured when you used the power button, only when it went into automatic sleep. I think there are options in schaps advanced config regarding this - might be worth a try.
Genesis3 said:
Have tried several - the most recent being the Hyperdragon 11/15 build.
Click to expand...
Click to collapse
I mean CE build number and aku. We have now many available builds from which to choose, and we could investigate whether it's a problem related to an HTC driver alone or if there's something in the SYS services too which has to be patched. I'm not talking about workarounds at all.
20931.1.5.0 (assuming the SYS and XIP were ported)
I don't have the numbers from the AT&T load handy.
Downgrading the SPL MAY have fixed it. I haven't had a lock/trash since last night when I changed the SPL. Hmmmm..... that "hotfix" may have been a "hotf$ck" instead.
Will update as/when I learn more.
This is NOT WM6.1 problem, if anything - it is WinMo's problem in general (all versions).
I have witnessed exactly same problem on WM 2003, WM2003SE, WM5, WM6 and WM6.1 - and I bet its the same on WM2002 and WM2000 (I just never had any of those ancient devices).
Solution is very simple:
DO NOT move IE cache to SD card, that's all.
Unless you have to (i.e. my iPAQ 6515 have literally no space left on Main Storage and I have to use SD for IE cache etc) then simply make at least weekly backups of your SD on your PC, its not a big deal, but it is annoying like hell (specially when it happens "on the road").
I have same problem several times!
Most offen it's happend in A***OS Smart Rom (don't remember full name), then i flash into wm6.1 off and it happends only one time. I use StorageTools to ix My Card after that (not data, only card)...
Is this heal????
Just use Opera browser. I dont have that problem in my tilt, although i did had problem with hermes, and scan and fix errors for the card made it go away. And i also a 2GB card, maybe it is an issue with higher storage capacity cards.
hi there, i have similar problem with my vario 3, i have installed all my application on sd card including tomtom. I have about 500 mp3 and pictures. i can listen to music all day at work but when turn my tomtom on, it says no maps found and then everything disappears on the sd card. it still shows in memory status that i have used 70% of my sd card but it doesn't show anything in win explorer.
i think it might have caused by installing tomtom on sd card.
can anyone help please?
mohsin_75 said:
hi there, i have similar problem with my vario 3, i have installed all my application on sd card including tomtom. I have about 500 mp3 and pictures. i can listen to music all day at work but when turn my tomtom on, it says no maps found and then everything disappears on the sd card. it still shows in memory status that i have used 70% of my sd card but it doesn't show anything in win explorer.
i think it might have caused by installing tomtom on sd card.
can anyone help please?
Click to expand...
Click to collapse
To recover that files you can use de windows tool error checking that will recover your files but to the found.000 folder (hidden), but the files are useless because is will be on the wrong extension and name
you have now 2 solutions:
1 - is guest the extension of that files and rename it
or
2- use the program named "getbackdata for fat" and it will correct the name and the file extension but not the correct name of the folder where it was. but better than nothing.
hope i could help
I saw this many times with RSSHUB - finally moved to main mem and have not seen it since. I also don't use PIE. It will be interesting to see if its 3.59 causing the issue, please keep us posted. I went a bought a new card thinking that it was a bad card:
If you're running 3.29 get it off your device - in fact, there should be a WARNING on the page for the various HardSPL versions. This may be device version specific (are there multiple hardware versions of the Kaiser as there are with the MDA?) but on MINE, 3.29 does this repeatedly.
I have now been running 3.28 for a week with ALL power management enabled, RSSHub and PIE caching to the storage card, and all my user-loaded apps running from the storage card, and I have been intentionally pounding the everloving hell out of it to try to get it to misbehave.
ZERO ISSUES.
The ONLY thing I changed was the SPL. I didn't even reflash the ROM (just the SPL) when I changed it - just used Jump to get back into the "superCID" mode and flashed 3.29 down to 3.28.
If you're running something other than 3.28, try 3.28.
So far, one week in, it has completely fixed this problem on my Kaiser.
Genesis3 said:
If you're running 3.29 get it off your device - in fact, there should be a WARNING on the page for the various HardSPL versions. This may be device version specific (are there multiple hardware versions of the Kaiser as there are with the MDA?) but on MINE, 3.29 does this repeatedly.
I have now been running 3.28 for a week with ALL power management enabled, RSSHub and PIE caching to the storage card, and all my user-loaded apps running from the storage card, and I have been intentionally pounding the everloving hell out of it to try to get it to misbehave.
ZERO ISSUES.
The ONLY thing I changed was the SPL. I didn't even reflash the ROM (just the SPL) when I changed it - just used Jump to get back into the "superCID" mode and flashed 3.29 down to 3.28.
If you're running something other than 3.28, try 3.28.
So far, one week in, it has completely fixed this problem on my Kaiser.
Click to expand...
Click to collapse
Does this happen with both cmonex’s & jockeyw2001’s HardSPL 3.29?
It happens with the ORIGINAL REAL 3.29 SPL that AT&T is shipping with their STOCK 6.1 ROMs!
That's not one of the hacked ones - that's OEM. I was able to REPEATEDLY lock the device and scramble the card by sticking PIE's cache on the card with the stock AT&T ROM.
I'm near 100% convinced its the 3.29 SPL that is FUBAR'd and not the hacking on it. I don't know why it should matter (its just a boot loader) but perhaps its doing something funky with the SD interface and whatever it does survives ROM initialization during the boot process.
In any event with 3.28 on my Kaiser I have had ZERO ISSUES with SD corruption or freezes of any kind, going on a week now. I've had no reason to reset it - at all - during that time.
I won't call this "conclusive" for another week or two, but given that with my usual usage I wouldn't survive ONE HOUR on 3.29, well, you tell me.
I have a Tmobile Wing with an 8gb memory card. I install almost all my programs to the card, unless it's something 'intrinsic' like Office Mobile, OneNote Mobile, etc. I use the card heavily for homework files, field and lab data, and notetaking for my classes.
Installed programs include:
Mobipocket
Goosync
Ultrasoft Money
Skype
CacheMate/CacheNav
Stuff I've done:
Pagepool to 6mb (has been this way for a LONG time)
BatteryStatus is also installed, but I found it after the hard reset I describe below. Haven't been brave enough to use the overclock function yet.
My program list has stayed pretty much the same...the most recent addition was Skype. I haven't dropped or drowned the phone.
Occasionally, as long as I've had the phone (about a year), I would notice that the Goosync and Mobipocked icons in my start menu would disappear (they would appear as a generic 'program' icon; you know, square with a blue bar at top). Sometimes they would come back, but they would always disappear again.
In the past week, the shortcuts ceased to function entirely. I get the message:
"The file <insert program I'm trying to use here> cannot be opened. Either it is not signed with a trusted certificate or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
So I followed directions and reinstalled the programs. They worked...once. Then I went back to getting the error. Suddenly NO programs installed on the memory card will run. They still appear in the Remove Programs list, so I even tried uninstalling them and reinstalling with no success. So I did a hard reset and started over from scratch.
Same problem. No programs installed to the memory card can be launched after the first time. I downloaded Google Maps just to see if a new program that hadn't been installed before had the same problem, and it is exhibiting the same behavior. I can launch a program newly installed to the card once, and then it no longer works.
I went ahead and installed my programs to main memory so I can have them for school; they work fine from there. But I'd sure like to move some back to the storage card. I have no problem accessing word, excel, etc, documents from the card.
I hope I've described this intelligently; I searched for the error message and saw a thread from 2005 under Universal:Universal, but couldn't figure out if they solved their problem or not.
Hoping someone can help me. I'm about ready to pull my hair out.
have you tried using a different card? considering that you still had the problem after a hard reset, my guess is that the problem is the card.
I hadn't considered that because it's only programs that are affected, all the word or excel files are fine, as are my ebooks, but I will try to round up another card somewhere to try. Thanks.
Hello everyone,
i own a Raphael since January and in this time it allready killed 2 SD-Cards.
The first one about 4 months ago.
Suddenly in the middle of usage the Raphael froze and i could not get it started again. even after a hardreset it was stuck in the bootscreen.
after a lot of trying and finally removing the sd card it bootet again without a problem.
the card was not readable anymore in any of my devices or windows boxes.
i thougth myself. well can happen even when a card is only half a year old got a new 8GB card and forgot about the incident.
yesterday while listening to some podcast suddenly the sound died. taking out the phone i found out it did not reacted to any power button presses or anything the screen stayed black.
after a softreset the phone worked again but took about 5 minutes to get in a usable state and the programms installed on the sd card where not aviable anymore.
taking a closer look i found that the card was not displayed in file explorer anymore.
gave it a try with my mp3 player. same result no card was found.
today in the morning i gave it a try on the pc with an sd-adabter. but also no result, wondows does not even recocnizes any device being plugged in. tryed a few data recover tools but non of them found the card.
someone has similiar experiances or any tips how i could get my data back from the card?
i guess the phone has to be send back for maintainance, but i doubt that they will find anything, if they accept it at all.
I have changed 4 sd cards because of similar problems. But the problem is most likely because of the fragility of high capacity microSDs, I wouldn't blame Raphael. Try other manufacturers (and try to find the ones that are not just rebranded)
I've had many issues with sd card corruption, but have solved some of the issues. Here's my advice (fwiw):
1. Get a card scanner, and regularly scan your catd. I do it everyday (takes 5 min). I use Wizcode Scandisk. It fixes errors and dumps out files that can be opened in notepad. It's worth looking at them, as it helped me find the multiple sources of corruption that I had.
2. Don't put your PIE cache on the card.
3. Change all 'save' paths (esp. the camera) to main memory.
4. Store any programs you use a lot on main memory.
5. Do NOT have any programs that run constantly on the sd card.
6. Do NOT put Fingerkeyboard on the sd card (major problem for me).
Basically, my advice is to use sd cards for storage. The Raphael has a lot of memory-use it for programs. I haven't had to format my card in about 4 months. I was doing it every couple of weeks for a while.
well basically i was using my sd card as a storage place for movies and podcast + podcastplayer prog.
and was using the player more or less the whole day.
i used the same card (and the other one before) also in my mp3 player when the raphael or the bt headset run out of power and there is no power outlet aviable to recharge. and twice the card failed in the rapahel.
when i got a new card, i also found that the card is working 100% on pc and mp3 player, but the raphael still can not see any sd card.
i really blame the phone and also assume that it now has a defective reader.
have to give it back to repairs as soon i have flashed the original firmware and make my way back to the store
You should scan the disk to find out the error sources. It may be something simple that causing them. Also, if your phone freezes when listening to music, you may want to either wait it out, or remove the card before soft resetting. You should do some searches on card corruption. There are lots of threads here that can be helpful.
many Sdcard and usbStick manufacturers got lowlevel format tools you can download and get cards not otherwise working in cardreaders on pc back to life
would love to get those cards working again. but i also would love to get the data back that was on them.
but the problem is the cards do not even appear on the pc, or any other device i have that can read/write them (usb card reader, digi cam, mp3 player)
its just as if nothing is ever inserted in the reader.
the low level format tools don't rely on windows driver model to detect cards
Flash Format (cnetx) has always been able to re-format my card, even when my pc couldn't recognize it and neither could my fuze. It has a free trial that works fine.
I haven't experienced any of these issues myself. But I'm sure I will now that I said that....
i gave that flash format a try, but it even failed to install. was one of those weird .exe installers. on the pc side it told me install was sucessfull, but on the ppc side was just a promt "installation failed".
a cab install would be nice, but without a working cardreader in the phone i guess would also not be of much help. i guess cuz of that that prog will not help me much. the reader in the phone is broken. cant read any cards, even brand new unused ones that are fine everywhere else just dont show up on the phone.
as for other "low level format tools" my search was quite unsecessful. i was looking at the sandisk and the transcend page (the suppliers of my 3 cards) but could not find anything.
google just found more request for this kind of program but not really somewhere where i could get it.
patlabor said:
i gave that flash format a try, but it even failed to install. was one of those weird .exe installers. on the pc side it told me install was sucessfull, but on the ppc side was just a promt "installation failed".
a cab install would be nice, but without a working cardreader in the phone i guess would also not be of much help. i guess cuz of that that prog will not help me much. the reader in the phone is broken. cant read any cards, even brand new unused ones that are fine everywhere else just dont show up on the phone.
as for other "low level format tools" my search was quite unsecessful. i was looking at the sandisk and the transcend page (the suppliers of my 3 cards) but could not find anything.
google just found more request for this kind of program but not really somewhere where i could get it.
Click to expand...
Click to collapse
Check C:\Program Files\Microsoft ActiveSync\CNETX-you'll find the cab in there. There will be several-you want the PPC-Arm one. It should install fine.
Card Freeze
Yeah I had the same thing happen. Raphael would not boot unless I removed the card and as soon as I placed the card back into the sd slot it would lock up. Unlike you I was able to get on of my PCs (either the XP Pro or the Vista Pro) to recognize it but all I could do was format it.
OK I like the idea of moving all the data to the main however I'm an old Windows CE guy (yeah I had a Jornado) and the memory used to be shared between program and storage. The device would allocate from the other when more was needed. If I place all the stuff I want into the Raphael main memory won't that lower the amount of RAM I have for running programs or vice versa? I really don't know if the memory is fluid since all I get when I look into the memory is one listing total storage and one total program, there is no slider bar like there used to be in windows ce.
webfrm said:
Yeah I had the same thing happen. Raphael would not boot unless I removed the card and as soon as I placed the card back into the sd slot it would lock up. Unlike you I was able to get on of my PCs (either the XP Pro or the Vista Pro) to recognize it but all I could do was format it.
OK I like the idea of moving all the data to the main however I'm an old Windows CE guy (yeah I had a Jornado) and the memory used to be shared between program and storage. The device would allocate from the other when more was needed. If I place all the stuff I want into the Raphael main memory won't that lower the amount of RAM I have for running programs or vice versa? I really don't know if the memory is fluid since all I get when I look into the memory is one listing total storage and one total program, there is no slider bar like there used to be in windows ce.
Click to expand...
Click to collapse
The storage memory on the device is flash, not ram, so you don't lose program memory changing the save paths to main memory (if that's what you meant by moving data to main memory).
I never had any issues with my storage cards (sd and cf) on my 2003 device. I don't think it was the device, but rather the cards. The big, 16 gb cards just seem to be less hardy than a 1-2 gb card. I had all my apps on the storage card (including stuff like magic button), and never had a problem. But, jeez, the 16 g microsd is sensitive as hell. It gets minor bits of corruption at least once a week. I scan it everyday to avoid it crashing, which has helped, because I've gone 4 months without formatting it. One thing that I've found screws it up royally is doing a lot of file/directory operations over active sync on a pc. I don't know why, but cutting and pasting files from one folder to another in the sd card frequently results in lost clusters. Renaming folders is also a bad idea.
OK Flash
Well I guess I didn't explain it correctly. According to HTC the RAM is 288MB with a ROM of 512MB. So I'm really confused since according to the start>settings>system>memory the total for my storage and my program = 549MB which is of course more than 288 and 512. So when I load applications into my device and get a choice of main or storage card when it was a large file (some apps I use were 14 megs or more) I would choose the storage card.
My old experience with Windows CE was whatever memory was on the device was shared with both the program and storage, so I would put as much as possible on my storage card. However in windows 6.1 or higher it lists two separate columns for Program and Storage with: Total, In Use, and Free. So when I install apps I presumed they went into the storage area. Am I mistaken? I figured Program on the device meant how much is currently in use. Kinda like opening multiple windows on a PC. I notice it's low when at once I have 4 applications open on my windows mobile device so that's what I thought Program memory was.
Therefore does installing to the Main, when given a choice during program installation. where does it get installed ROM, RAM? Why is my total memory higher than RAM or the ROM
Any insight would help me decide the best location for my program installation to not corrupt the data, or have the flash card screw me up either.
288 MB is the total amount of system ram. A large amount is not user-accessible, it's used by the kernel/OS/Page-pool, so you don't see it reported. It's still there, though. The rom memory is 512 MB, but the actual memory in rom is subtracted by the storage memory so you see the amount of user-available memory. With 2003 devices, if the battery ran down, you lost all of your data, because the storage memory was in RAM (except perhaps for a little flash disk space). But with a fuze, you can pull the battery out, and not lose your data.
Totally confused
OK your right about the 2003 devices which is why I placed most of my stuff on a storage card. However why is my total reported memory 549MB more than the 512 ROM? Also when I install stuff to the device where does it get stored, the 512 ROM? Are you saying that the 200mb of Program being shown is 288 RAM minus the 88 being used to run the OS?
So are you saying its safe to install all my apps onto the device and I won't lose anything if the battery runs out?
Yeah, I've been saying that for about 3 weeks, lol! They got rid of the volatile storage memory with winmo 5; we're onto 6.5 now, and it's a thing of the distant past. I you don't believe me, pull out your battery (there's no backup battery on the device) and see if it causes a hard reset.
This is not an uncommon problem with digital cameras, as well. It's complicated, but the bottom line is this: whenever you buy an SD/micro SDHC/etc. card, you should do a full format of it on your COMPUTER, then put it in your device.
Hi all,
I recently purchased and installed a larger Micro SD card for my TD2. I did what "Bruce Inman" said after i asked my question about replacing the SD card and how to retain all my data (http://forum.xda-developers.com/showthread.php?t=671656). Anyway i copied everything across as instructed and now my start menu icons are in a grid of 4 instead of 3 it used to be....i previously had TD2 Tools 3 installed and remember the setting in TD2 Tools "Start Menu Icon Spacing" so i thought i would check this as maybe it had changed from 3 - 4, upon doing so the application is greyed out and i can make no changes to this option...i thought maybe it some problem with the phone so i rebooted and it made no change. I removed all the my additional apps excluding TD2 Tools and the problem still occurs. I decided to remove TD2 Tools and it sort of worked, it made my start menu icons appear in a 3 icon per line grid but all the text names become really small like size 2 instead of the normal. I`m at a loss what i can do to fix this and would like someones input if possible, Reinstalling TD2 Tools sets the icon spacing to 4 but in TD2 Tools itself its set to 3 and i cannot change it.
Ive attached some screenshots for better reflection of the issue. The first is the icon spacing which clearly shows 4 icons per line instead of 3 and the TD2 Tools application with the option greyed out is the second
You install TD2 Tools to main memory, correct?
Recently my 16gb San Disk crashed and I copied everything to a 16gb Kingston.
The main folders that have to stay intact is your Application Data folder and Program Files.
This worked seamlessly for me.
SD card should not have affected your start menu unless your folder structure changed.
Are you stalking my posts Bruce???
Anyway i think i installed TD2 to my SD card as i didnt want to clutter the device with apps and games....figured it would be fine to do this...
So im still stuck with my problem...
maybe there is a registry key or something thats funked stuff up, hell i dunno, all i know is after swapping SD cards Ive had nothing but issues, especially with device performance
Oh i should mention i reinstalled the old SD card, reset my phone and the problem still occurred, figured it was worth a shot
Gave up so i reflashed to the Stock HTC 6.5 ROM....dunno what happened but now i have the annoying task of reinstalling and remembering what i had installed
I also have a problem with my memeory card..It's so slow when saving files and copying files. I dunno what the problem is..
trixie0604 said:
I also have a problem with my memeory card..It's so slow when saving files and copying files. I dunno what the problem is..
Click to expand...
Click to collapse
Hi Trixie, Im pretty sure this the phone HTC Proprietary port transfer rate doin this....i usually use a USB Micro SD Adapter to move all my data across and it super fast over USB, as soon as i use the HTC USB Port with the cable its slower.
Hi,
I use Windows Mobile phones for many years. Most time a HTC Wizard, but some other devices as well. Recently I got a new Eten M800 and came across a very bothersome problem that I cannot solve and that did not occur with any other of my older devices.
Each program I install on the memory card will quit itself if I put my phone in power safe mode. Don't know how that mode is called correctly. If I push the on-button shortly or leave it to rest for a short while. If I turn the phone on again the program has been quit. This is very uncomfortable and hasn't occurred on any other WM phone I used. It even occurs with different ROMs installed on it. I already tried toggling the power management options found in the tool AdvancedConfig but that didn't help as well. I thought it might be some problem where it will lose the handles to opened files if the card is put to power management mode. I have no idea what else to try but would be very thankful for any ideas or help. Programs I've tried and this occurs with: Cachemate, Opera Mini for WM, Tomeraider. Probably this happens with every program installed on the memory card. If I install the same program to the device's internal memory the programs do not quit!
Help appreciated
Tim
Edit: One last thing that might be worth mentioning: This is the first time I use a SDHC card. I didn't try yet if that would happen with a (smaller) normal micro SD card.
thats always been the case for the htc phones I had
sd interface is disabled to save power when suspented
resulting in apps being terminated
same reason why people don't put today screen programs and stuff on sdcards