[RADIO] Sprint Radio 2.42.01.04.27 - Hero CDMA Android Development

This is the newest radio included in the Sprint RUU that was just leaked.
http://dl.damagedroms.com/Radio_2.42.01.04.27.zip
This could brick your device. Flash at your own risk.

did you test this too when you flashed?

Links seems to be down...anyone else having troubles?

Link is 404'd.

i've been 404'd

thedudejdog said:
i've been 404'd
Click to expand...
Click to collapse
as has everyone else.

HeroMeng said:
as has everyone else.
Click to expand...
Click to collapse
Nope, I was 420'd. Not sure what it ment, but my computer is laughing a lot now and the CD drive is open like it wants me to put something in.

Whoops. Sorry I took off and renamed it and didn't check it.
Fixed.

DL is working now

Kcarpenter said:
Nope, I was 420'd. Not sure what it ment, but my computer is laughing a lot now and the CD drive is open like it wants me to put something in.
Click to expand...
Click to collapse
make sure you dont get cotton drive that **** sucks

Damage, have you run this?

I'm flashing it right now. Question though if I want to do a pri fix can I just use this rom instead of going back to 1.5?

Just flashed...went fine. nothing really to report.

Flash successfull for me...full bars..had that before though.
Calls can go out....texts can go out. Havne't got any incoming yet.

Working here to

Can one of you guys that has flashed it test USB tethering?

getut said:
Can one of you guys that has flashed it test USB tethering?
Click to expand...
Click to collapse
Flashing worked, data works, calls work, no USB tether though. Kinda expected that.

icornwal said:
Flashing worked, data works, calls work, no USB tether though. Kinda expected that.
Click to expand...
Click to collapse
Are you on PRI 170_003? I was never able to get USB tethering working with any radio/rom. It wasn't until I changed to PRI 2.11 that USB tethering kicked in. Has been working ever since. Hopefully flashing the new radio won't mess things up.

Yep, I'm on the old PRI. That would be the problem.

ItsDon said:
Are you on PRI 170_003? I was never able to get USB tethering working with any radio/rom. It wasn't until I changed to PRI 2.11 that USB tethering kicked in. Has been working ever since. Hopefully flashing the new radio won't mess things up.
Click to expand...
Click to collapse
where can I get PRI 2.11

Related

CupCake 1.5 Released

ADP 1.5 is out!!!
http://www.htc.com/www/support/android/adp.html
i see a new radio on there... i'm more interested in that. anyone think it's safe to use?
so this is an official build? how do we install/apply it?
and what is the difference / advantage e.g. to the Dudecake or Haykuro Builds?
????
thats awsome.. but no one has packaged it yet... but atleast we know it official..
also i wonder if "Dudeoflife" or "Haykuro" can use any of this to help with there projects?
GOOD FIND!
Any guinea pigs wanna try out the radio?
Gimpeh said:
Any guinea pigs wanna try out the radio?
Click to expand...
Click to collapse
I'm about to try the whole thing on my phone, I'm just backing up my phone.
throwing the radio on now.....
I got exited and fastbooted this to my device and some thing is wrong as i am stuck at splash I will try to go back with nandroid back up.
brianb7590 said:
i'm about to try the whole thing on my phone, i'm just backing up my phone.
Click to expand...
Click to collapse
cool a valiant soul.. Full report please,,:d
flashing the radio right now.
If you get this working post your result
I cant boot ! I will try to go back with sd card and RC29
carlosjcar said:
I cant boot ! I will try to go back with sd card and RC29
Click to expand...
Click to collapse
Make sure you wipe after you fastboot! I'm signing in to my Google account right now!
Nice! I missed the auto predicting keyboard!
VOICE SEARCH!!!
Radio was flashed any works fine. will test things out later.
how to install it? I have a t-mobile (sim-unlocked) g1. it is not root hacked. is it possible to install it?
Just installed. All is working fine as now...
Only English locale
how does it look? screenshots?
Has a much nicer orientation change animatin, it uses a blur transition as opposed to the fade one! I would do screen shots but.....I dont know how...
It even seems faster than the Dude's build IMO
I can't use ADB? ideas? "Operation not permitted"
wwhich one
which link are you suppose to download exactly? it seem like the rom is broken down into sections??

PRL 60664 - Download Included

There is a new prl... 60664
Navigate to setting> about phone> system updates> update profile ( IF this goes well then do the next step)
then navigate to setting> about phone> system updates> update prl
Here is the PRL file from my phone.. Only for manually installing
View attachment 60664.zip
Use ##775# method
HERE IS HELP BACKING UP YOUR PRL.. If iffy about updating.
http://forum.xda-developers.com/showthread.php?p=6146971
Just letting others know that dont read the forums of some roms.
Someone just stated this in dc 2.07.2.
didnt we already know this? didnt flipz make a custom onr built off it or something? im using flipz prl and radio but running dc. haha! it works out well for me, no garuntee for you, obviously.
You're using the flipz_pri...not prl
Thx, knock on wood this gives me better more roaming
momoceio said:
You're using the flipz_pri...not prl
Click to expand...
Click to collapse
What he said.. PRL is different then pri
Flip or any other rom maker doesnt control the PRL. Its something used for signal on your phone. They update it OTA.
thanks, had no idea...and i don't think flipz has a custom prl updater?
wow guys thanks
your right, pri NOT prl
either way, im preeeetty sure i had 60664 running right before flipz released his custom prI
i was proven wrong amany times before, this being one, im sure itll happen again.
edit
dude i suck the big one, i have to stop smoking
your completely right in every manner
please dont mind me
http://forum.xda-developers.com/search.php?searchid=36281750
Works on Damage 2.0.7.2
It says that it could not update, but when i went back and looked it now says 60664. I am assuming it updated fine.
jonesdana said:
It says that it could not update, but when i went back and looked it now says 60664. I am assuming it updated fine.
Click to expand...
Click to collapse
Haha yeah mine does that every time I update. I dont know why.
This time it told me mine was up-to-date though but when i checked it was changed.
WTF
This has made me go from 60663 to 27392 ?????????
And now I have no signal.
And I've just deleted my last nandroid to make room.
WTF do I do now ?????
jonesdana said:
It says that it could not update, but when i went back and looked it now says 60664. I am assuming it updated fine.
Click to expand...
Click to collapse
this is probably that maintience update they were talking about
grifforama said:
WTF
This has made me go from 60663 to 27392 ?????????
And now I have no signal.
And I've just deleted my last nandroid to make room.
WTF do I do now ?????
Click to expand...
Click to collapse
nandroid doesnt write radio. or back it up. so that wouldnt help
best bet is to flash fresh 1.1 and then update profile to be sure sprint registers you. then update prl.
make sure your not roaming
just happened to me as well, what was the ## to update PRL?
grifforama said:
WTF
This has made me go from 60663 to 27392 ?????????
And now I have no signal.
And I've just deleted my last nandroid to make room.
WTF do I do now ?????
Click to expand...
Click to collapse
UHH why delete ONE simple nano. You should have more then enough room on an sd card for that 1 simple file that can save you trouble in bad situations. Like this one.
But maybe try resetting your phone. See if it doesnt change.
Avalaunchmods said:
nandroid doesnt write radio. or back it up. so that wouldnt help
best bet is to flash fresh 1.1 and then update profile to be sure sprint registers you. then update prl.
make sure your not roaming
Click to expand...
Click to collapse
lol+10o'these'here'things
Jus10o said:
UHH why delete ONE simple nano. You should have more then enough room on an sd card for that 1 simple file that can save you trouble in bad situations. Like this one.
But maybe try resetting your phone. See if it doesnt change.
Click to expand...
Click to collapse
im sorry your prediction qoutes get me EVERYTIME
This is why I make backups of my backups backups.
If you have the PRL file on your SDCARD just dial ##775# Input your MSL and then browse for your PRL, then menu>Commit Changes
mountaindont said:
im sorry your prediction qoutes get me EVERYTIME
Click to expand...
Click to collapse
Like guessing what the problem is, without really knowing the answer?? I do it alot.
Jus10o said:
UHH why delete ONE simple nano. You should have more then enough room on an sd card for that 1 simple file that can save you trouble in bad situations. Like this one.
But maybe try resetting your phone. See if it doesnt change.
Click to expand...
Click to collapse
ehhh well as i said even if he did save the backup, nandroid doesnt restore /radio partition. thats where the prl and pri is.
the prl he got is a different carrier prl so he needs to update profile so sprint registers it.
anyone else get a weird prl?

[ROM]RUU_SuperSonic_S_Sprint_WWE_3.30.651.3_Radio_2.15. 00.09.01_NV_1.77_003

Here new RUU for Supersonic
http://www.filefactory.com/file/b44...0.09.01_NV_1.77_003_release_157088_signed.exe
Enjoy!
I will be using this thanks for the RUU as always
Thanks Football!
How do you install this?? Flash via recovery??
xxbabiboi228xx said:
I will be using this thanks for the RUU as always
Click to expand...
Click to collapse
What driver do I need to install this rom?? Do I need adb??
javidnky2005 said:
How do you install this?? Flash via recovery??
Click to expand...
Click to collapse
You just need to connect your phone to your PC and run the exe. This will remove root, if your are rooted.
I just cannot get this thing to go. It just sits at waiting for bootloader for a few minutes then gives me a USB connection error. What gives?
sorry Football if i am sounding like i am doubting you but is this official? i'm only asking cuz i didn't think they would release a full RUU for such a small and minor update to the phone that may or may not affect certain people, and i also noticed that the dates for the last RUU of 3.30.651.2 were all the same from within the .zip file, but this one looks like they just pieced it together. thank you very much, i am downloading now!
onelovekir said:
sorry Football if i am sounding like i am doubting you but is this official? i'm only asking cuz i didn't think they would release a full RUU for such a small and minor update to the phone that may or may not affect certain people, and i also noticed that the dates for the last RUU of 3.30.651.2 were all the same from within the .zip file, but this one looks like they just pieced it together. thank you very much, i am downloading now!
Click to expand...
Click to collapse
They build a RUU for every update.
ok thank you, just had to check cuz i'm bout to put together a new ROM now, thanks guys!!
thanks football
cosine83 said:
I just cannot get this thing to go. It just sits at waiting for bootloader for a few minutes then gives me a USB connection error. What gives?
Click to expand...
Click to collapse
Yeah I'm having the same exact problem. What's wrong with it?

Easy root for Thunderbolt on Mac OSX

Easy root for Thunderbolt on Mac OSX
I wrote this and seems to work fine the few times I have used it.
If you guys run into any problems or errors please let me know so I can see whats wrong.
Follow the Video set by step.
Sorry if I talked quietly I'm sick.
Enjoy!
Fixed. If you are getting a adb command not found error. Redownload the big file or download the runmefix.zip (Check your tube video) uncompress the file and put runme in the thunderbolt directory of your desktop.
If you download the big file after April 9th 2011 at 7:30am then you do not need this fix
Saw the video. Got the files. Will be doing this as soon as my phone is charged in the AM. Hopefully it works.
hkbladelawhk said:
Saw the video. Got the files. Will be doing this as soon as my phone is charged in the AM. Hopefully it works.
Click to expand...
Click to collapse
Just now saw this. Did it work for you? Any problems after?
djkeller3 said:
Just now saw this. Did it work for you? Any problems after?
Click to expand...
Click to collapse
Yes. Worked awesome. Takes a while, but it worked. Just make sure to follow directions to the T, I accidentally hit enter on a command too soon and had to start over. But all works as far as I can see. Super easy, but takes a while.
Thanks again to OP!
This looks great--no messing around in ADB?
Its uses adb but you don't have to worry about it or anything like that.. The download includes what it needs.
fryetech said:
Its uses adb but you don't have to worry about it or anything like that.. The download includes what it needs.
Click to expand...
Click to collapse
Yeah it worked great for me, the first time around the phone booted earlier than it should have and I had to do the whole thing over, and the second time I tried to remover the Verizon Backup via titanium backup (**DO NOT TRY THIS**) and almost bricked my phone, and so the third time everything worked perfect and now Im running Perfect Storm by Chingy and its awesome thanks!
My phone isn't recognized. Usb debugging is checked but the terminal window just says checking for phone over and over. Any ideas ?
beavis1226 said:
My phone isn't recognized. Usb debugging is checked but the terminal window just says checking for phone over and over. Any ideas ?
Click to expand...
Click to collapse
I had that happen for me as well. It seems that by default the Mac doesn't recognize it. Click ignore on the pop-up and click okay for charge only. Unless this is what you did. In that case try again
Sent from my ADR6400L using XDA Premium App
thanks good work
how do you start over? do you just turn off the phone and restart the app on your computer?

No network at all? (Please help!)

So I switched over from 4.4.4 to MIUI 8 Global (6.0.1) almost a week ago and I have had no data since then, but I could make calls and receive texts. Yesterday morning to find that I had no service of any kind on my device... Any ideas? I tried flashing different radios and I am shown that I have signal for a split second before it goes back to no bars, attempted to set the carrier manually too but nothing seems to stick.
I am on the Ting network in the western half of the US if that helps any.
Thanks guys, my N5 and I greatly appreciate it!
Does the phone work properly on a stock ROM? APN settings are correct for data purposes ? Was the phone bumped or dropped?
On my moms nexus 5 the wifi wasn't working anymore so i reflashed the stock rom and it started working again. If you don't want to have to resort to losing data you can try checking if the antennas if they are disconnected on the back of the phone. Just take off the back covers and plug the antennas back in and that might help
audit13 said:
Does the phone work properly on a stock ROM? APN settings are correct for data purposes ? Was the phone bumped or dropped?
Click to expand...
Click to collapse
The signal works on stock and 5, haven't dropped the phone
Sounds like the custom ROM doesn't work well with your phone. Any other users of the same rom experience the same issue?
audit13 said:
Sounds like the custom ROM doesn't work well with your phone. Any other users of the same rom experience the same issue?
Click to expand...
Click to collapse
I saw a few things said about it in the ROM's thread but no answers. I asked in there as well but nobody replied.
I can sometimes make calls/text, but for the most part is just stays disconnected.
Jiharu Ikumiya said:
I saw a few things said about it in the ROM's thread but no answers. I asked in there as well but nobody replied.
I can sometimes make calls/text, but for the most part is just stays disconnected.
Click to expand...
Click to collapse
Are you sure you have Efs folder after flashing any custom rom?
Stevica Smederevac said:
Are you sure you have Efs folder after flashing any custom rom?
Click to expand...
Click to collapse
If I did where would I find it? I apologize, I'm still very new to all of this.
Jiharu Ikumiya said:
If I did where would I find it? I apologize, I'm still very new to all of this.
Click to expand...
Click to collapse
About phone - phone status. You should imei number, serial number, wifi mac address.
Stevica Smederevac said:
About phone - phone status. You should imei number, serial number, wifi mac address.
Click to expand...
Click to collapse
Yeah everything was there, it just said I had no network. Anytime I try to connect it flashes sprint for JUUUUUST a second before kicking me off lol. I'm using my stock 4.4.4 for now so I at least have a working phone, but I really would like to use the MIUI 8 if possible.
Sorry for the slow reply, I've been busy.
Jiharu Ikumiya said:
Yeah everything was there, it just said I had no network. Anytime I try to connect it flashes sprint for JUUUUUST a second before kicking me off lol. I'm using my stock 4.4.4 for now so I at least have a working phone, but I really would like to use the MIUI 8 if possible.
Sorry for the slow reply, I've been busy.
Click to expand...
Click to collapse
Then it's obvious that the MIUI rom is causing the problem. You should move to something else.

Categories

Resources