hey guys, i'm looking for a tool that implements a bluetooth slider into the lock screen. i really hate that i always have to unlock my device, start the comm manager, activate bluetooth, close the task manager..... only to activate bt for my free speech car kit. maybe one of you guys knows a tool a implements a slider into the lockscreen with which you can activate bt by a single slide without unlocking the device. regards, insi
try this
make a quick link and woullaaa
credit go to developer
1IV54IV3 said:
hey guys, i'm looking for a tool that implements a bluetooth slider into the lock screen. i really hate that i always have to unlock my device, start the comm manager, activate bluetooth, close the task manager..... only to activate bt for my free speech car kit. maybe one of you guys knows a tool a implements a slider into the lockscreen with which you can activate bt by a single slide without unlocking the device. regards, insi
Click to expand...
Click to collapse
I don't think it's possible at this stage, there are numbers of tweaks to change the color of the lockslider, appearance of slifer, appointments, transparency's etc, but actually adding a shortcut to, for example bluetooth, is not possible yet.
Hey very cool idea!
I like it - hope it is possible.
MaTT
i could look like the call answer slider for example: one direction is unlock, the other one bluetooth toggle... just an idea of mine...
Hi,
I didn't find anything with rthe search.
It would be great to have an toggle for the "Airplane Mode" like the WLAN toggle.
And the eye candy would be if the lock screen wallpaper would change to one with an airplane. I did see this once on an other phone.
Thx in advance
tomylee79 said:
Hi,
I didn't find anything with rthe search.
It would be great to have an toggle for the "Airplane Mode" like the WLAN toggle.
And the eye candy would be if the lock screen wallpaper would change to one with an airplane. I did see this once on an other phone.
Thx in advance
Click to expand...
Click to collapse
Just enable plane mode in the Comm Manager...sure, it doesn't change the wallpaper, but it switches the phone off.
I can do this mude a Toggle at the home screen would be much easier, like with WLAN.
i would like to have this toogle too
It's in french but here is what you are looking for : http://htc-touch-hd.forumactif.biz/...fix-f65/tweak-radio-et-data-toggle-t15613.htm
could u upload it ?
u must be reg. to download it.
http://www.mediafire.com/?oknmmuwiwnu
thx
i installed it but it is only a information what is actually on/off.
No have a look in \Windows\Menu démarrer\Programmes (the path in french HD2à you'll find 2 lnk which willprovide you data toggle and radio toggle (Airplane Mode Toggle)
im sorry. you are right.
i have searched on a other folder
any chance that there is a way to enable/disable airplane mode WITHOUT entering the pin every time you enable your phone? I had a symbian phone before and that's one thing that is really bugging me with WinMo. I never had the enter my pin when using airplane mode, only when restarting the phone. (the other thing is that sms delivery reports where added to their sms with a little symbol showing it was successfull, not being seperate sms that pollute my inbox but thats another story )
it does not work on my device. it is looking for VJVolubilis.exe
gets WLAN switched off as well? I would like to have two toggles one that goes in classic airplane mode and o.e that switches off just the phone. maybe thats what the 2 for.
VJVolubilis on my website might work, although I haven't tested it for years.
V
I was looking for something similar. The links from first posts don't work anymore however I've found yet simplier radio toggle:
http://forum.lakeridgesoftware.com/showpost.php?p=90464&postcount=7
Works perfectly on my Rhodium.
Guys, I would like to have a shortcut on Sense Home to parameters like:
- Flight Mode On/Off
- Wifi On/Off
- Bluetooth On/Off
I saw that some of you have this but can't manage to find any apps/command line to do this - anyone can help ?
Thanks ahead !
http://forum.xda-developers.com/showthread.php?t=601203
Nice but...
The flight mode is not a real flight mode - it only disconnects GSM radio - WIFI and BT remains active. Can't make BT toggle work
Wireless_manager residing in Windows directory does the job you want!
\Windows\wrlsmgr.exe
Does what you want! Though it's iconless
Therefore I created this (below) text file, renamed it from *.txt to *.lnk (shortcut) and moved it to Start Menu _ program files.
Code:
54#"\Windows\wrlsmgr.exe"?\Windows\sktools_icons.dll,-276
Download SK-Tools their old icon set here;
http://s-k-tools.com/sktools/sktools_icons.zip
Easy isn't it I hope this helps,
Senax
Secure Settings is a Locale/Tasker/Llama compatible plugin for Android 2.2+
Please see the changelog for updates
Secure Settings Pro Trial licenses are available! Click the menu button inside of the Upgrade screen to request a trial.
As of v1.2.6, you can create Launcher shortcuts to any available Action option!
Conditions:
Max Failed Login Attempts - Perform an action based on a specified number of failed login attempts
Google Now Shortcut [4.1+,Pro]
Outgoing Call
Secret Code- Enter a special number in the Dialer and trigger an action.
Actions:
Toggle Airplane Mode
Set Airplane Mode Radios
BT Connection [4.0+]
BT Tethering [4.0+,Pro]
Execute Shortcut
Font Size [4.0+]
Toggle the Keyguard
Launch Activity
Locale Picker
Toggle Mobile Data [2.3+]
Run any GNU linux command (with/without root)
Tasker users can store command output info in user defined Tasker variables
Toggle SIP Receive Calls [2.3+]
Change SIP Call Option [2.3+]
Stay Awake While Charging
Show Touches [4.0+]
Wake the device
WiFi Hotspot [4.0+]
WiFi Sleep Policy
Dev Admin Actions:
Toggle the Camera [4.0+]
Lock the device
Lock Screen Widgets [4.2+]
Set or reset the device's password/pin
Root Actions:
Background Process Limit [4.0+, Pro]
Background Data [Pro]
Force GPU Rendering [4.0+]
Hardware Overlays [4.1+, Pro]
Package Notification [4.1+]
Package State (Previously Package Manager)
Phone Options (Answer,End,Silence Calls) [Pro]
Power Button Lock [4.1+, Pro]
Reboot Options (Uses native system methods) [Pro]
Enable/disable USB Tethering [4.0+,Pro]
VPN [4.0+, Experimental!]
Enable/disable Wireless ADB
Helper Actions:
Enable/disable Accessibility Services
Enable/disable USB Debugging
Set Active Day Dream [4.2+]
Toggle Day Dream State [4.2+]
Enable/disable GPS [2.3+]
Enable/disable Data Roaming
Update Lock Screen Owner Info [3.0+]
Set Lock Screen Timeout [4.0+, Pro]
Enable/disable Pattern lock screen
Enable/disable NFC [NFC Adapter required]
Change device input methods (switch soft keyboards without the prompt)
Enable/disable "Location Services" option for location awareness
Unknown Sources
WiFi Optimization [4.2+]
WiFi Scanning [4.3+]
Custom ROM Actions:
Enable or Disable ADB Over Network [CM9 only]
Expand Desktop [CM10/Paranoid Android]
Enable or Disable Fast Charge [Custom Kernel with Fast Charge Required]
Enable/Disable Kill App Back Button (CM and other custom ROMS)
Toggle LTE on CM9
Toggle Samsung Modes (Blocking, Driving and Power Saver Modes)
I hope you enjoy
Download Here
Explanation of Permissions:
Device Administrator Access - Required if you wish to lock the device or set/reset the password
Storage Access - Required for the Run Command function to write to the SD Card
Full Network Access - Required to download and check for updates for the Helper application
System Tools - Required for the Keyguard and Wake Lock functionality
Root Access - Required if you wish to install the Helper or run privileged commands from the Run Command function
Change Configuration - Required to change Locale
Change Network State - Required to toggle Mobile Data
Change Wifi State - Required to toggle Wifi Adapter for Wireless ADB
Wifi Access - Required to determine if Wifi is enabled for the Wireless ADB function
Bluetooth/BT Admin - Required to Connect to BT Devices
Boot Complete - Required to install Helper on boot if missing
Process Outgoing Calls - Required to use outgoing calls as conditions
Buy me a beer
New feature in Version 1.1.8
With version 1.1.8, Secure Settings can be converted to a system app to get the same functionality as having the Helper installed.
If you wish to move the app to the system, you MUST first disable Device Administrator!
I cannot stress this enough. If you don't do this, the app will break and will be a pain to remove.
Once that's disabled, you can use Titanium Backup to convert the app to a system app.
Thank you very much for this plugin. I have it installed which I downloaded from your site. Is there any difference between that and this one, which is available in the Market? Also, does this one also require to be installed as a system app in order for some functionality to work (e.g. Keyguard Off)? Thanks.
This is a completely different version than what is hosted on the google code site.
This app doesn't require you to install it to the system. I wrote a second app that I called the "Helper" which gets installed there. If you don't install the Helper, you will have the following available to you:
Keyguard
Lock Device
Set Password/Pin
Run Command
Wake Device
And Wireless ADB if you are rooted.
Hope this helps
Ok, thanks. I will try this out right now.
hey Corey Z -
I'm running into issues where Secure Settings plugin doesn't fire if I run a lot of shell scripts. I have a task where I fire a script, wait for its exit code, then fire another script; I do this maybe 4-5 times. This happens just fine, but when I tried to test a different task that also uses a shell script, it doesn't fire and my task just hangs on the "Wait until %CMD_EXIT is set". This is verifiable by turning on "show output" and "show notification" - notification doesn't happen sometimes, indicating that the plugin isn't firing..?
Thanks for the help!
Is it possible ro reset a sim lock pin..???
Sent from my X10 TripNMiUI-Iris using Tapatalk
@strictlyrude27
So, let me see if I understand...
It works fine when you run one command, one after another but you have issues when running multiple commands simultaneously?
Is that it?
Sent from my Thunderbolt
@Z3US911
That's an interesting thought. I'll have to look into that.
Thanks for the suggestion!
Sent from my Thunderbolt
intangibleDroid said:
@strictlyrude27
So, let me see if I understand...
It works fine when you run one command, one after another but you have issues when running multiple commands simultaneously?
Is that it?
Sent from my Thunderbolt
Click to expand...
Click to collapse
Upon further investigation it looks like scripts aren't firing if I manually select the notification to end the script. I set up my profiles to make sure exactly 1 script fires at a time to avoid collisions; when they all fire and exit properly rather than being aborted, I can re-run as much as I'd like.
Thank you very much, just what I needed!
Sent from my Nexus S 4G using XDA Premium App
@strictlyrude27
Are you referring to the cancel script option you get after you click the script running notification?
If so, that function is actually a little buggy at the moment. It may not actually cancel the script.
Is that what may be causing the problem?
Sent from my Thunderbolt
intangibleDroid said:
@strictlyrude27
Are you referring to the cancel script option you get after you click the script running notification?
If so, that function is actually a little buggy at the moment. It may not actually cancel the script.
Is that what may be causing the problem?
Sent from my Thunderbolt
Click to expand...
Click to collapse
That could be it! I haven't had to cancel a script since originally posting that, so hopefully I never run into it again..
This is great!
Now I am able to disable the pattern lock while connected to my Wifi.
On the Turn On/Off GPS....does that mean I can re-use an old task where GPS gets turned off when I exit Google Maps/Navigation like it used to in <2.2?
I've been using this plugin with ZERO issues to disable the pin lock when I enter known WiFi and to enable it otherwise.
@SilentSummer
You should be able to enable/disable GPS like you were able to prior to GB
intangibleDroid said:
@SilentSummer
You should be able to enable/disable GPS like you were able to prior to GB
Click to expand...
Click to collapse
Will give it a try, thanks
Edit: Works great
this may be a dumb question, but is the helper supposed to be on the market somewhere? or is it the manual download only? I only ask because the manual download is worded like you should only use it if you have problems...
Hi,
I use a program called "CELLBROKER," and whenever I get it I need to put my password and enter ... I created a profile in TASKER to put the password ( Input - Type - "my password"), but I do not know how to use a command in linux to run automatically enter.
Can someone help me?
Thanks a lot!
gohamstergo said:
this may be a dumb question, but is the helper supposed to be on the market somewhere? or is it the manual download only? I only ask because the manual download is worded like you should only use it if you have problems...
Click to expand...
Click to collapse
The Helper is not available on the market. I currently have it hosted at my google code site.
If you want to install it, use the install option in the settings of my app. The manual download is offered if that fails for any reason.
Hope this helps.
Sent from my Thunderbolt
After searching for a way to use one click to switch BlueTooth discoverable mode on/off, and couldnt find any that seemed to work on my HD2, I created one.
Here by attached.
If you use CHT - you can set it in the shortcuts next to the CHT BlueTooth On/Off toggle, and you will have control for everything in one click.