hello!!!
I would like to know how can I disable the original incoming call window (with foto and slider). I have the S2U2, and I want to use the S2U2 incoming call window. But I cannot use it, because every time the original HTC HD2 window is "over" the S2U2...
I have the SPB MS. Also I use HD2 tweak, and BSB Tweaks...
best rgds!
install the cab "Touch X disable lock" at this thread: http://http://forum.xda-developers.com/showthread.php?t=584415
This is a very good thread to do some mods, go over it and use whatever you want.
Or...
revelare said:
hello!!!
I would like to know how can I disable the original incoming call window (with foto and slider). I have the S2U2, and I want to use the S2U2 incoming call window. But I cannot use it, because every time the original HTC HD2 window is "over" the S2U2...
I have the SPB MS. Also I use HD2 tweak, and BSB Tweaks...
best rgds!
Click to expand...
Click to collapse
What version are you using? I believe the latest already incorporates a option to disable the original lock screen without installing a separate cab.
Might want to check their web site here
Hope this works for you!
I'm using the 2.40version. Ok, it's not a problem with the original lock screen...I don't have problems with the S2U2 lock screen, everything is working fine...the problem is with the original screen slider to receive the incoming call...S2U2 have his own screen slider ( S2A Caller ID) and I would like to use it...but I can't because the original HTC screen is always on the top...I don't see any option in the S2U2 option to disble this original HTC Caller ID...Also I cannot find any .cab to disbale it...
here you have the screen capture:
revelare said:
I'm using the 2.40version. Ok, it's not a problem with the original lock screen...I don't have problems with the S2U2 lock screen, everything is working fine...the problem is with the original screen slider to receive the incoming call...S2U2 have his own screen slider ( S2A Caller ID) and I would like to use it...but I can't because the original HTC screen is always on the top...I don't see any option in the S2U2 option to disble this original HTC Caller ID...Also I cannot find any .cab to disbale it...
here you have the screen capture:
Click to expand...
Click to collapse
My bad, thought you where having problems with the lock screen. I've used S2U2 for a while and I don't have the problem. (Not sure why) Only get S2U2's caller Id when receiving a call,
Sorry buddy
revelare said:
I'm using the 2.40version. Ok, it's not a problem with the original lock screen...I don't have problems with the S2U2 lock screen, everything is working fine...the problem is with the original screen slider to receive the incoming call...S2U2 have his own screen slider ( S2A Caller ID) and I would like to use it...but I can't because the original HTC screen is always on the top...I don't see any option in the S2U2 option to disble this original HTC Caller ID...Also I cannot find any .cab to disbale it...
here you have the screen capture:
Click to expand...
Click to collapse
I think you'll have to ask this in the S2U2 thread, and not here...
webpatrick said:
I think you'll have to ask this in the S2U2 thread, and not here...
Click to expand...
Click to collapse
Agreed..
..
HELP!
I also have the problem with the original CallerID over the S2u2 one..
Could you please share the answer to this problem here?
Related
Hi there,
Apologies if this has been asked before but I tried a search and didnt find what I was after.
Basically, I tried S2U2 and love the slider lock (much better than the default lock on winmo) but I dont like the rest of the screen.
What I want is an app that only has the slider part of S2U2 - so when I lock it the bottom part appears with the slider, and the rest of the screen is whatever was on screen at the time I locked it.
Is this possible?
Thanks,
try the question forum
-Never mind. Misread the question.-
No, it's not possible with S2U2.
Try this
May be this could solve your problem.
Right now I`m running a wm 6.5 rom (Phantom Rom`s 4-17 build I think), and I love it. Except that its using the manilla dialer. It has the new 6.5 dialer built in though with manilla running on top. I found out because when the phone is locked with the new 6.5 lock incoming calls use the new 6.5 answer ingnore sliders, and call screen.
Is there a way to unistall the manilla dialer, its cooked in there. I checked the registry to see if there was a quick enable disable in software/htc and software/windows and didn`t find anything.
install advanced config tool, and disable the phone s,in option under'phone' menu
Call History is unreadable
mike21pr said:
install advanced config tool, and disable the phone s,in option under'phone' menu
Click to expand...
Click to collapse
I have made the setting, now i have default windows 6.5 dialer, but the call history list is displayed in white text ... as you can see from the image attached, the history is there (the progress bar on the right), but i cannot read it.
Any hints?
Regards,
Cosmin
kI had get in the same trouble with pknyo .
had tried to install the advanced config tool but can't find the call history.
I used 6.5 rom diamond default rom
Apologies for restoring the old thread, but I was wondering if any of you managed to figure this out? I have the exact same problem with a WM6.1 ROM on a Blackstone (Touch HD) with white text for the call list (identical issue to the screen shown above).
Edit: After another hour or so of searching, I've found the solution on this thread: http://forum.xda-developers.com/showthread.php?t=523084 - mainly post #7 gives a cab which fixes the problem
(this is for the Blackstone but might work on other devices...)
is there a way to disable windows default incoming call window.
when i use WM6.5 default lockscreen there is a clash between Window Default and HTC incoming call window.
this also causes a delay of 4sec before the phone starts ringing
I have S2U2 installed on my touch pro 2, however I don't want to use the S2U2 interface to answer the phone (S2A ?) because there already is a "Slide to Answer" feature in the phone.
Is there any way to set it so that when I get a call and the phone is locked by S2U2, that it just unlocks it and shows the phone UI?
Nevermind, I figured it out. Just disable the Caller ID feature.
Hi,
Sorry if this is already been answered but ive had a big look and cant find it.
I thought WinMo 6.5 had indicators on the lock screen showing missed calls and messages etc etc, each with its own separate slider, and you could just slide the one you wanted to see more about in order to unlock the device and go directly to that app. yet my leo HD2 doesn't seem to have this,it just has one slider at the top of the lock screen.
is this a setting somewhere i have missed or is this a "feature" for some reason?
Thanks
I dont have a Leo (yet) to confirm this, but on 6.5 you have to first tap the main slider. It will then show sliders for the notifications.
you are my hero!
I suspected it would be really obvious, but i just could not find it anywhere!
Thank you very much
Slide to Lock Notifications not working
When I want to see if I have a missed email, SMS or something, I have to unlock the screen to see. Is there anyway for me to be able get my lock to say Tap or Slide to Unlock instead of just slide to unlock so I will be able to see my notifications by just tapping instead of having to put in my password to see?
Is there a hack to lock touch screen during a call? I tried the InCall Screen Tweak app. While it works, I still frequently trigger the notification area. It seems InCall Screen Tweak doesn't start up fast enough.
I'm wondering if there's a hack to put a slide lock during phone call? Something looks like this:
qaplus said:
Is there a hack to lock touch screen during a call? I tried the InCall Screen Tweak app. While it works, I still frequently trigger the notification area. It seems InCall Screen Tweak doesn't start up fast enough.
I'm wondering if there's a hack to put a slide lock during phone call? Something looks like this:
Click to expand...
Click to collapse
You need to enable sleep during call. Several of the tweak apps have a setting for this.
Also S2U2 would add lock slider to dialer.
As said already, S2U2s "Lock/sleep during call" option works just fine .
I've been trying to find out if there is anyway to use the CHT lock while in a call. So far, the only thing I have been able to find is to use S2U2. It works really well, but I'd like to be able to use the other lock screens too.
Or just press the power button at the top of your device after you've answered. It doesn't hang up, and if you need to use any of the in call features, you just press the power button
Is there anyway to set S2U2 to only lock on phone calls? I use Cookies Mod, and like his unlock screen, but if I use it in conjunction with S2U2, I have to unlock my phone first with S2U2 and then from Cookies. Anyone have any idea?
This app has it all:
qaplus said:
Is there a hack to lock touch screen during a call? I tried the InCall Screen Tweak app. While it works, I still frequently trigger the notification area. It seems InCall Screen Tweak doesn't start up fast enough.
I'm wondering if there's a hack to put a slide lock during phone call? Something looks like this:
Click to expand...
Click to collapse
What`s that "anti-noise" option? I don`t have that option on my td2!
What program has the tweak to turn off the screen? I've looked in B&B tweaks, Touch Tools, and also in CHT"s, with no avail.
rkrims said:
This app has it all:
Click to expand...
Click to collapse
Nice, where can I find it?
Thx
Filippo
filippovox said:
Nice, where can I find it?
Thx
Filippo
Click to expand...
Click to collapse
did u try clicking on the image the dude posted? lol. it's not free, be warned.
http://pocketshield.net
CAB here