autorun - Touch Pro, Fuze General

hello,
I have a question about autorun.
After I have flashed my rom autorun starts to run but it doesn't install anything?
I have 3 files config, config_end, config_operator.
I thought maybe it is the name why it doesn't install.
I try different thing out to make it run but it doesn't work.
I have writed down what I have in these three files.
I'm also using checkautorun
config:
EXEC:\windows\AutoVer.exe
LOCK:Enabled
CAB: \WINDOWS\HTCMMSProviderCAB_20080506.CAB
CAB: \Windows\Opera_Skin.CAB
CFG: \Windows\config.txt
CFG: \Windows\config_end.txt
EXEC:\windows\CheckAutoRunt.exe
EXEC:\windows\2.mscr
LOCK: Disabled
config_end:
LOCK:Enabled
LOCK: Disabled
RST: Reset
config_operator:
LOCK:Enabled
XML: \WINDOWS\Menu_Operation.xml
CFG: \WINDOWS\config.txt
CFG: \WINDOWS\config_operator.txt
What am I doing wrong ?

I think you're messing up by calling out config.txt in config.txt, and doing the same with config_operator and config_end. Basically, you want one .txt file to lead into another, but it looks like you've got a loop going on. You can put the Reset command at the end of config.txt (I go straight to sk tools backup, restore my pim, then the device resets). So, just skip config_end. And I guess you should remove the 'CFG: \WINDOWS\config_operator.txt' from the end of config_operator, or just combine config_operator and config.txt.
I just use config.txt and add2config.txt (in each package where there's something running during customization-this works in EVK). Here's what my config.txt looks like:
LOCK:Enabled
EXEC:\WINDOWS\UnzipSkin.mscr
EXEC:\WINDOWS\UnzipVIO.mscr
EXEC:\WINDOWS\UnzipBing.mscr
EXEC:\WINDOWS\UnzipFNKBD.mscr
EXEC:\WINDOWS\UnzipGoogle.mscr
EXEC:\WINDOWS\UnzipWidgets.mscr
EXEC:\WINDOWS\StartMenuStartup.mscr
CAB: \WINDOWS\fexploreext.cab
EXEC:\WINDOWS\Unzip1.mscr
XML: \WINDOWS\zzz-Active Sync.xml
EXEC:\WINDOWS\Restore.mscr
EXEC:\WINDOWS\cleanup.mscr
LOCKisabled
EXEC:\Windows\skbackup.lnk
Click to expand...
Click to collapse
My actual config.txt in the kitchen just has this:
LOCK:Enabled
LOCKisabled
EXEC:\Windows\skbackup.lnk
Click to expand...
Click to collapse
The command queue just comes from a bunch of add2config's. I don't have all the other .txt files from the oem (the basic build is one of Da_G's kitchens).
You also need to have mxipupdate_oemoperators_107.provxml run during bootup-it has the autorun settings in it. I've tried removing this provxml and just adding the keys directly to the registry with an app.reg file, but then autorun doesn't work (tip: you can speed first boot by removing all the garbage in the provxml's and just cooking it straight into the registry. It works for reg keys, but you need the provxml's for databases and stuff like that).
<!--Autorun settings-->
<characteristic type="Registry">
<characteristic type="HKLM\Comm">
<parm name="AutoRunCFG" value="\windows\config.txt" datatype="string" />
<parm name="AutoRun" value="\windows\AutoRun.exe" datatype="string" />
</characteristic>
</characteristic>
Click to expand...
Click to collapse

thank you
Thank you for helping out.
I will try this out after I have some sleep and will respond back iff it works or not.

menomenic said:
Thank you for helping out.
I will try this out after I have some sleep and will respond back iff it works or not.
Click to expand...
Click to collapse
and the config_operator is first, at least by default, you can change that in registry. I just had a big trouble with autorun, find new facts about new autorun, downgraded to old one and wrote about discoveries here:
http://forum.xda-developers.com/showthread.php?t=684426

Related

WM5 smart dial...

Does anyone have this WM5 smart dial... :?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(capture from http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59>&func=view&catid=36&id=9738#9738)
This Smart Dialing or InteliDial looks working on WM2005....
mwilmar said:
Does anyone have this WM5 smart dial...
Click to expand...
Click to collapse
Almost .... mine is on a Magician II and it's Version 2.2 (Build 21527) but not the black that you have - it's all T-Mobile colours.
brykins said:
mwilmar said:
Does anyone have this WM5 smart dial...
Click to expand...
Click to collapse
Almost .... mine is on a Magician II and it's Version 2.2 (Build 21527) but not the black that you have - it's all T-Mobile colours.
Click to expand...
Click to collapse
Can u post it..? i need 2 test it on WM5.... plz :?
Yes, please share it. Thanks.
mwilmar said:
Can u post it..? i need 2 test it on WM5.... plz :?
Click to expand...
Click to collapse
It'll be one of the files in the EXT_ROM which is in the Uploads/Charmer section of the ftp site.
brykins said:
mwilmar said:
Can u post it..? i need 2 test it on WM5.... plz :?
Click to expand...
Click to collapse
It'll be one of the files in the EXT_ROM which is in the Uploads/Charmer section of the ftp site.
Click to expand...
Click to collapse
Thanks brykins, I found 1 file inside the path named 'smartdialing enable....cab' but nothing happen after installed. It's seems no more cab files seems like about smartdailing stuff.
Any idea? Or something built in the rom?
siukeung said:
Thanks brykins, I found 1 file inside the path named 'smartdialing enable....cab' but nothing happen after installed. It's seems no more cab files seems like about smartdailing stuff.
Any idea? Or something built in the rom?
Click to expand...
Click to collapse
No idea....I'm probably going to hard reset later today and re-install now that I know what software I am using on WM5, so I'll see what of the EXT_ROM I install and what one gives the dialer.
me! said:
re-install now that I know what software I am using on WM5, so I'll see what of the EXT_ROM I install and what one gives the dialer.
Click to expand...
Click to collapse
Okay - have reset and installed:
CAB: \Extended_ROM\CAB-Customization-Connection-TMUK-Charmer-Nov15.sa.CAB - Add T-Mobile Internet Settings
CAB: \Extended_ROM\Signed_EnableATAbortSTKCall.sa.CAB - enables ATAbortSTKCall
CAB: \Extended_ROM\Signed_GPRS_PAP.CAB - changes default GPRS auth to PAP
CAB: \Extended_ROM\SmartDialing_enable_0915_signed.CAB - enables smartdialling
And also the extracted soft-key customising menus and everything works fine. I think these are about the minimum that needs to be installed from the T-Mobile EXT_ROM
brykins said:
me! said:
re-install now that I know what software I am using on WM5, so I'll see what of the EXT_ROM I install and what one gives the dialer.
Click to expand...
Click to collapse
Okay - have reset and installed:
CAB: \Extended_ROM\CAB-Customization-Connection-TMUK-Charmer-Nov15.sa.CAB - Add T-Mobile Internet Settings
CAB: \Extended_ROM\Signed_EnableATAbortSTKCall.sa.CAB - enables ATAbortSTKCall
CAB: \Extended_ROM\Signed_GPRS_PAP.CAB - changes default GPRS auth to PAP
CAB: \Extended_ROM\SmartDialing_enable_0915_signed.CAB - enables smartdialling
And also the extracted soft-key customising menus and everything works fine. I think these are about the minimum that needs to be installed from the T-Mobile EXT_ROM
Click to expand...
Click to collapse
that SmartDialing_enable_0915_signed.CAB only content of this XML... :
<wap-provisioningdoc>
<characteristic type="FileOperation">
<characteristic type="\Windows\Help\Smart Dialing.lnk" translation="install" >
<characteristic type="Shortcut">
<parm name="Source"
value="\Windows\IntelliDialer.htm" translation="install"/>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\Security\Phone\Skin" translation="filesystem" >
<parm name="ext" datatype="string" value="\windows\phcanhtc.dll" translation="filesystem" />
</characteristic>
<characteristic type="HKCR\CLSID\{1AD110A1-B3E6-4CB9-AC0F-69E059AFBFEF}" translation="filesystem" >
</characteristic>
<characteristic type="HKCR\CLSID\{1AD110A1-B3E6-4CB9-AC0F-69E059AFBFEF}\InprocServer32" translation="filesystem" >
<parm name="Default" datatype="string" value="DPadMenu.dll" translation="filesystem" />
</characteristic>
<characteristic type="HKLM\SOFTWARE\Microsoft\Shell\Extensions\ContextMenus\Phone" translation="filesystem" >
</characteristic>
<characteristic type="HKLM\SOFTWARE\Microsoft\Shell\Extensions\ContextMenus\Phone\MSCdial" translation="filesystem" >
</characteristic>
<characteristic type="HKLM\SOFTWARE\Microsoft\Shell\Extensions\ContextMenus\Phone\MSCdial\{1AD110A1-B3E6-4CB9-AC0F-69E059AFBFEF}" translation="filesystem" >
<parm name="Default" datatype="string" value="" translation="filesystem" />
</characteristic>
<characteristic type="HKCR\CLSID\{7CB99F67-9930-4375-919C-37512108F0C3}" translation="filesystem" >
</characteristic>
<characteristic type="HKCR\CLSID\{7CB99F67-9930-4375-919C-37512108F0C3}\InprocServer32" translation="filesystem" >
<parm name="Default" datatype="string" value="DPadMenu.dll" translation="filesystem" />
</characteristic>
<characteristic type="HKLM\SOFTWARE\Microsoft\Shell\Extensions\ContextMenus" translation="filesystem" >
</characteristic>
<characteristic type="HKLM\SOFTWARE\Microsoft\Shell\Extensions\ContextMenus\Phone" translation="filesystem" >
</characteristic>
<characteristic type="HKLM\SOFTWARE\Microsoft\Shell\Extensions\ContextMenus\Phone\MSCProg" translation="filesystem" >
</characteristic>
<characteristic type="HKLM\SOFTWARE\Microsoft\Shell\Extensions\ContextMenus\Phone\MSCProg\{7CB99F67-9930-4375-919C-37512108F0C3}" translation="filesystem" >
<parm name="Default" datatype="string" value="" translation="filesystem" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
It look's like they need intellidialer too...
dopod 818 pro cabs in ext rom any help?
I recently upgraded to the prophet. There is smart dialing available. But it seems the prog is embedded in the OS, or maybe another hidden extrom?
I unlocked my extrom and it is listed as Extrom2. This is about 10MB. The files in Extrom2 are mostly autoconfig cabs for all the different telcos. Plus voice commander & several customization cabs. Only a 70K cab smart-dialing enable cab, no other smart dialing cabs.
the dopod pro has 47+MB storage space available plus the 10mb extrom1 is only 57MB. Plus the WM5.0 OS, which is about 32MB gives 89MB. Where is the rest? We have 128MB ROM. Eten M600 has 80+MB available space. I'm missing about 39MB somewhere. Could it be there's an ExtRom 1? Any gurus can shed some light here? If anyone can help, I'd be glad to post the smartdialling cab here as I also have an xda2 running wm5.0 with no smartdialling
818 Pro - Chinese Version with NO Intellidialer.....
Please help, my chinese version 818 Pro has no intellidialer built-in.
Can anybody extract it from an English version?
Looking at the contents of the XML file in the SmartDialing_enable CAB posted by mwilmar......it looks like in addition to the SmarDialing_enable CAB file, you also need to get copies IntelliDialer.htm and DPadMenu.dll from the \Windows directory of someone with the 2.2 version of Smart Dialing.
Try copying all 3 files (the CAB file, IntelliDialer.htm and DPadMenu.dll) into your WM5 \Windows directory. Then tap on the CAB file which will hopefully update the registry with the necessary settings.
If anyone can get me those files, I'm happy to try on my XDA Atom.
ozmael said:
Looking at the contents of the XML file in the SmartDialing_enable CAB posted by mwilmar......it looks like in addition to the SmarDialing_enable CAB file, you also need to get copies IntelliDialer.htm and DPadMenu.dll from the \Windows directory of someone with the 2.2 version of Smart Dialing.
Try copying all 3 files (the CAB file, IntelliDialer.htm and DPadMenu.dll) into your WM5 \Windows directory. Then tap on the CAB file which will hopefully update the registry with the necessary settings.
If anyone can get me those files, I'm happy to try on my XDA Atom.
Click to expand...
Click to collapse
Try this thread for the files you are after
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=45&id=10251#10251
Let us know if you get it working on the Atom.
Re: dopod 818 pro cabs in ext rom any help?
Putra said:
I recently upgraded to the prophet. There is smart dialing available. But it seems the prog is embedded in the OS, or maybe another hidden extrom?
I unlocked my extrom and it is listed as Extrom2. This is about 10MB. The files in Extrom2 are mostly autoconfig cabs for all the different telcos. Plus voice commander & several customization cabs. Only a 70K cab smart-dialing enable cab, no other smart dialing cabs.
the dopod pro has 47+MB storage space available plus the 10mb extrom1 is only 57MB. Plus the WM5.0 OS, which is about 32MB gives 89MB. Where is the rest? We have 128MB ROM. Eten M600 has 80+MB available space. I'm missing about 39MB somewhere. Could it be there's an ExtRom 1? Any gurus can shed some light here? If anyone can help, I'd be glad to post the smartdialling cab here as I also have an xda2 running wm5.0 with no smartdialling
Click to expand...
Click to collapse
Just tried to alter the config.txt inside the ExtRom2, after a soft-reset, the Text file restored to its initial content, all my alterations had gone.
Seems that there really a ExtRom "1" stuff, ExtRom2 is just like a temperory storage.
And, had tried to use the Rom unlocker
http://www.pxdxa.com/read.php?tid=8272&keyword=ext rom
after running the unlocker, it told me to "Unlock ExtRom First"!! So, there should be an ExtRom, but cannot be easily exposed. still trying ....
I need the Smartdialer too, has an Eng version 818Pro Rom in hand now, it has Smartdialer built-in.
Zelig said:
ozmael said:
Looking at the contents of the XML file in the SmartDialing_enable CAB posted by mwilmar......it looks like in addition to the SmarDialing_enable CAB file, you also need to get copies IntelliDialer.htm and DPadMenu.dll from the \Windows directory of someone with the 2.2 version of Smart Dialing.
Try copying all 3 files (the CAB file, IntelliDialer.htm and DPadMenu.dll) into your WM5 \Windows directory. Then tap on the CAB file which will hopefully update the registry with the necessary settings.
If anyone can get me those files, I'm happy to try on my XDA Atom.
Click to expand...
Click to collapse
I tried this on my PPC-6700 just to see if it would work and it did not add Smartdialing for me. I copied the 3 files shown above into the Windows folder and I then ran the cab. After the cab installed I checked the dialer app to see if the smartdialing option was there and it was not. I tried a soft reset and checked again and no joy. Anybody know how to add this feature to my device?
Click to expand...
Click to collapse
Re: dopod 818 pro cabs in ext rom any help?
kfflee said:
Just tried to alter the config.txt inside the ExtRom2, after a soft-reset, the Text file restored to its initial content, all my alterations had gone.
Seems that there really a ExtRom "1" stuff, ExtRom2 is just like a temperory storage.
And, had tried to use the Rom unlocker
http://www.pxdxa.com/read.php?tid=8272&keyword=ext rom
after running the unlocker, it told me to "Unlock ExtRom First"!! So, there should be an ExtRom, but cannot be easily exposed. still trying ....
Click to expand...
Click to collapse
Any gurus can shed light on this ExtRom1 and ExtRom2??
I think the feature is embedded in the phone application,,if we can get the file "cprog.exe" from any working WM5 pocket pc with the smart dial working in it + the button to turn the speaker on in the dial pad also,,,getting this file might get things working (i suppose), I tried to get it out of a K-jam but I couldnt,,maybe if someone have dumped the rom can help us
...
I think that's not in cprog.exe. I have a ROM dumped from Himalaya(1.71.64) and from Wizard(1.3.2.5 CSY). Wizard has SmartDialer,Hima not. I've tried today to scan both registries for any differences about and have found much more keys/values about smartdialing. There are these files with same filesize. Anyway here they are including registry values,that are in Wizard.
Smart dialling for himalaya wm5
dear tomasNM
How to install this intellidialer to himalaya WM5 having ROM VER 1.65b96? Regards.....chandra
...
I want to install and use,but I don't know how. Nothing,that I have tried,isn't working. I am not able alone to port it to the Himalaya WM5 and noone want/unable to help me. Someone?

menu_operation.xml

Hi,
I have installed on my Kaiser the following ROM RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40. 02_1.65.16.25_Ship.exe.rar.
So far so good - it works.
I have created a new ROM (based on this ROM) with some more application - so far so good.
Nevertheless, I have tried to move some *.lnk (\windows\start menu\programs) to some new folder (\windows\start menu\tools, ....) with editiong the Menu_Operation.xml file in xkaiserkitchen_01-20-08\OEM\OperatorPKG.
Unfortunaltey none of the *.lnk are moved.
Menu_Operations is started once after a hardreset or after flashing the new ROM - started from config_operator.txt.
The creation of new directory works.
Example:
<characteristic type="%CE4%\Programs\Tools\Search.lnk" translation="install">
<characteristic type="Move">
<parm name="Source" value="%CE4%\Programs\Search.lnk" translation="install"/>
</characteristic>
</characteristic>
Should means: move search.lnk from directory \windows\start menu\programs to \windows\srat menu\programs\tools
But nothing happens.
Any ideas ?
_________
In my cooked ROMS, I edit initflash.dat directly.
NOTE: initflashfiles.dat has an interesting issue where if you use notepad to edit the contents and save it, notepad will add extra characters that prevent the device from booting properly after flash. I personally use WinHex (any Hex editor will work) to remove the extra bits it adds at the beginning of the file after making changes.
Click to expand...
Click to collapse
Taken from http://wiki.xda-developers.com/index.php?pagename=Cooked_ROM_Q-Mobile#Cooking
Me too. More direct and do not need to struggle w/ xml
EDIT: Please ignore this mail.
hm, now I am confused.
As far as I know, all OEM apps are stored under \xkaiserkitchen_01-20-08\OEM\OEMAPPS - but there is no *.dat file, only a *.dsm is available.
There is either no initflashfiles.dat under \\xkaiserkitchen_01-20-08\*.
Which file has the information which *.lnk is stored in which directory ?
For my own apps (saved under \xkaiserkitchen_01-20-08\Packages ) this information is initflashfiles.txt (created with packages generator by ervius)
Thanks
kuzco
Cannot move links from os.
Need to use the copy function instead.

Changing OEM *.lnk (shortcuts) paths before cooking ?

hum... i have here a noob question about basic cooking ...
because the lack of roms in my native language... i started to **** my own ...
i have one simple question ...
i now have folders with icons in /programs
and i have a problem,.. how can i arrange the shortcuts in the folders ?
for example.. in packages i edit the "initflashes" and i can change the path of the shortcut to wherever i want...
but how i can change in OEM stuff ? like ACTIVESYNC ? ... i can see the application.exe and the link.lnk em OEM folder... but how can i set the path to the link ?
sry my english ... i dont know if i explained well what i want :\
thanks
Use OEMizer, it's very helpful to create shortcuts.
The simplest way is to modify customization script in OperatorPKG (OEM folder) i think.
I do it this way.
Add to config_operator.txt this line:
XML: \WINDOWS\your_xml.xml
And now create your own XML with description of operations you would like to do.
Examples
Move shortcut:
Code:
<characteristic type="FileOperation">
<characteristic type="\Windows\Nabídka Start\Programy\Nástroje" translation="install">
<characteristic type="MakeDir"/>
</characteristic>
<characteristic type="\Windows\Nabídka Start\Programy\Nástroje\Správce SIM.lnk" translation="install">
<characteristic type="Copy">
<parm name="Source" value="\Windows\Nabídka Start\Programy\Správce SIM.lnk" translation="install"/>
</characteristic>
</characteristic>
<characteristic type="\Windows\Nabídka Start\Programy\Správce SIM.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
</characteristic>
Change registry values:
Code:
<characteristic type="Registry">
<characteristic type="HKLM\Software\Microsoft\Today" translation="filesystem" >
<parm name="Date" datatype="integer" value="1" />
<parm name="Enabled" datatype="integer" value="1" />
</characteristic>
</characteristic>
thanks for the quick reply!!! ill try
ruizit0 said:
thanks for the quick reply!!! ill try
Click to expand...
Click to collapse
i think have better solution.. go to the oem after to oem lang 409
and open with notepad the initflashfiles.dat
and change or see how make shortcuts..
Yes... But it's possible only in english ROMs.
For example in my Czech rom initflashfiles.dat looks strange...
b16b said:
i think have better solution.. go to the oem after to oem lang 409
and open with notepad the initflashfiles.dat
and change or see how make shortcuts..
Click to expand...
Click to collapse
If you do this, remember to hex edit the file to delete the first two keys on the top left.
b16b said:
i think have better solution.. go to the oem after to oem lang 409
and open with notepad the initflashfiles.dat
and change or see how make shortcuts..
Click to expand...
Click to collapse
dont know why but... i dont have that file lol
im working on this rom
RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship
maybe because its an old release ... (but its the only release in my native language )
ill try the custom .XML trick
the OEMizer is a nice tool ... but i think its only to create new shortcuts right ?
what i want to do is to move the existent shortcuts in OEM to inside my folders...
its possible that OEMizer make that to... but for now ill try the custom solution...
thanks all
used OEMizer... i figured out how it works ... i just get duplicated shortcuts... but its easy to fix... just have to remove the shortcuts in oemapps ...
but i saw now that i have another problem in this field..
because my native language (portuguese) have special charecters like: ã , ç , á .. etc...
when i created the folders..
Directory("\Windows\Menu Iniciar\Programas\Aplicações"):-File("icon.lnk","\Windows\icon.lnk")
Click to expand...
Click to collapse
the special characters doesnt appear :\ ...
Aplicações -> Aplicaes
errr ... isnt possible to make special charecters in initflashes to create the folders ?
thanks
You must have initflashfiles.dat in your kitchen. But it's hidden. You must set up the file manager to "show hidden and system files".
About special characters... You must save result in UTF-16 LE encoding.
N3o21 said:
You must have initflashfiles.dat in your kitchen. But it's hidden. You must set up the file manager to "show hidden and system files".
About special characters... You must save result in UTF-16 LE encoding.
Click to expand...
Click to collapse
hum... i have allways "show hidden and system files" in explorer
but when i get home ill do an dos attrib to double check ...
in the bed .. i remembered that enconding option.. (here is UTF-8) .. ill try later .. hope that isnt a initflashes limitation in special characters
one more question ... i used OEMizer to make some shortcuts for OEM stuff like ActiveSync and others... but the icons dont show up ... hum.. i read something before about that problem but i cant find it :\
(i was thinking that would be great if someone can make an "noob" FAQ for cooking with this little questions to help the people that is starting in the cooking buisness)
Faria once created a nice tutorial on how to cook those things. I think I have the link in the Hermes Kitchen link down in my sign. Check that out!
cant find :\
http://forum.xda-developers.com/showpost.php?p=2357462&postcount=4
there is kaiser ptg rom - dump it and u will get all ptg oem
kareem9nba said:
If you do this, remember to hex edit the file to delete the first two keys on the top left.
Click to expand...
Click to collapse
i never do this and i don't have problem

[Question] Default items on start menu

its there a way to use the reg to set default programans on startmenu?
Example:
File Explorer
Internet Exporer
Comm Manager
Phone
Messenger
NO HELP
at frist boot after hard reset...
THX
wolframio74 said:
its there a way to use the reg to set default programans on startmenu?
Example:
File Explorer
Internet Exporer
Comm Manager
Phone
Messenger
NO HELP
at frist boot after hard reset...
THX
Click to expand...
Click to collapse
in \settings\menu ...
thx but how i export these setting to make it default on rom?
wolframio74 said:
thx but how i export these setting to make it default on rom?
Click to expand...
Click to collapse
it's reg key i don't remember witch one...
wolframio74 said:
thx but how i export these setting to make it default on rom?
Click to expand...
Click to collapse
Never trying this but you can start to export values from HKLM\Software\Microsoft\Today\Items. You can import later to include any shortcut you want to be listed
wolframio74 said:
its there a way to use the reg to set default programans on startmenu?
Example:
File Explorer
Internet Exporer
Comm Manager
Phone
Messenger
NO HELP
at frist boot after hard reset...
THX
Click to expand...
Click to collapse
Try settingssavior, i think it has a provision for it. But I am not sure if works or not!
I have done this before, and unfortunately, a simple registry tweak doesn't do the trick. You will need to write (or edit) an *.provxml in your kitchen specifying the *.lnks to move to the "\Windows\Start Menu" directory.
Don't think this can be done by Reg, the default items are Stored als .lnk under "\windows\Startmenu\" controled by Initfiles.dat or Proxml files!
Maybe you can try Proxml syntax with UC
like this
Code:
<characteristic type="\Windows\Start Menu\" translation="install">
<characteristic type="Internet Explorer.lnk " translation="install">
<characteristic type="Copy">
<parm name="Source" value="\Windows\pie.lnk" translation="install"/>
</characteristic>
</characteristic>
and delete Help :
Code:
<characteristic type="\Windows\Start Menu\Help.lnk" translation="install">
<characteristic type="Delete">
<parm name="ForceDelete"/>
</characteristic>
</characteristic>
s4dd1 said:
Don't think this can be done by Reg, the default items are Stored als .lnk under "\windows\Startmenu\" controled by Initfiles.dat or Proxml files!
Maybe you can try Proxml syntax with UC
like this
Click to expand...
Click to collapse
You are right ...sorry for misguiding, by mistake I thought it is a today item plugin which is enabling/disabling is controlled by registry values.
edited the title to maybe get some more eyeballs on this.
just move around the link files
i think u are asking if u can customize the start menu...
use total commander and go to your main memory. then click on windows folder. then click on start menu folder. here you'll see link files for all your programs. with your stylus, click and hold...Copy/Move. then click on Tree...find the directory you want to move it to or just plain delete the link file off that folder and keep just the ones you want.
hope it helps.
If the Rom is UC compatible,than this is most safe way to put these setting right after each hard reset.
KMFM$ said:
I have done this before, and unfortunately, a simple registry tweak doesn't do the trick. You will need to write (or edit) an *.provxml in your kitchen specifying the *.lnks to move to the "\Windows\Start Menu" directory.
Click to expand...
Click to collapse
That sound very nice, where i find that provxml to edit it? or i may create it? (how) thx
BTW: thx to all for the replies
I would just add it to the end of an existing .provxml file. In your kitchen, go to OEM and search for mxip_oemupdate_*.provxml (something like that). Just open it up and add the entries before the </wap-provisional> tag at the end. A tip on editing, search the boards for Sleuth's User Customization thread. It gives tons of examples and links for editing .provxml files. When I get a chance, I'll post a copy of what I use to help you out.

Removing something from registry with .xml

Hello,
I have a question.
For a answer i already looked around at the net and have read some threads at xda, modaco, and some site at msdn.
The short version: how do i remove a dir from the register with a .xml file?
The long version:
I need to remove a dir from the registry.
I opened a new text document and saved it as _setup.xml.
In this .xml file i wrote:
<characteristic type="Registry">
<nocharacteristic type="HKLM\Software\Microsoft\Shell\DeviceBeta" />
</characteristic>
</characteristic>
After that i opened Quickcab in the first field I put in by application name 1 and by owner 1.
By the second screen I add the _setup.xml file to the windows folder
At the next screen i do nothing and click on create.
I save it as _setup.cab.
After the .cab file is maked i move it to my phone and run it from my phone.
It says that evreything is installed and so on.
But when i reboot my device nothing happened and the dir. at the register is still there.
What am i doing wrong?
Do i need to put something more in the .cab file?
Moved as not ROM Development.
don't think you really understand xml
http://en.wikipedia.org/wiki/XML
xml can't do anything at all on it's own it's a model language which needs to be interpreted by another program
it's not a programming or batch language
Hi,
I believe your xml file should look somthing like this:
To delete a value:
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<!-- Delete a registry value under the following key -->
<characteristic type="HKCU\Software\Second Test Key">
<noparm name="Value To Delete" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
To delete a key (or a dir as you call it):
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<!-- Delete a registry key, with all its values and subkeys -->
<nocharacteristic type="HKLM\Software\RegKey To Delete" />
</characteristic>
</wap-provisioningdoc>
Cheers,
/Cacti
Rudegar said:
don't think you really understand xml
http://en.wikipedia.org/wiki/XML
xml can't do anything at all on it's own it's a model language which needs to be interpreted by another program
it's not a programming or batch language
Click to expand...
Click to collapse
Thank you for the link Rudegar more brain food my brains are already at the point to explode.
One of the threads that i have read is http://forum.xda-developers.com/newreply.php?do=newreply&p=5908996.
Thank you for helping.
le_cactus said:
Hi,
I believe your xml file should look somthing like this:
To delete a value:
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<!-- Delete a registry value under the following key -->
<characteristic type="HKCU\Software\Second Test Key">
<noparm name="Value To Delete" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
To delete a key (or a dir as you call it):
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<!-- Delete a registry key, with all its values and subkeys -->
<nocharacteristic type="HKLM\Software\RegKey To Delete" />
</characteristic>
</wap-provisioningdoc>
Cheers,
/Cacti
Click to expand...
Click to collapse
le_cactus thank you for helping out i am trying this out tonight or tomorrow.
Can i save this in a text file and save it as .xml and then cab it?
Can some one explain how to delete a key in the registry of windows mobile 6.5 by a simple guide ?
Because I am busy making my own rom.
The problem i have is that in the right corner below i have standing I quote: Beta Expires: 05/01/2010
I know you can delete this by going in you registry to hklm/software/microsoft/shell/Devicebeta and delete this key.
But i like to delete this key automatic when i have flashed the rom and not doing it afterwards by going in to the registry.
If i have a problem i try to solving it at my own by reading threads and searching the net for answers but some times i need some help to get it right and to get me on the right track.
I appreciate the help that i get here so thank you all for helping out.
xml to reg and vice versa
First it started for me when I saw an UC capable ROM, from there I too wanted to go from reg/rgu to xml and vice versa After some researching I found several threads concerning my wishes. Within these threads you'll find your desired utilties For the overall clarity I'll start with the beginning;
[App] ROM Flashing Junkies: User Customization is here!
http://forum.xda-developers.com/showthread.php?t=366337
see the UC related software tools
Within this thread there is an application called SDConfig creator which was created by DoeDoe's. Currently it is replaced by;
[Release] UC ROM SDConfig.txt Builder (reborn) [Prikolchik Ed.]
http://forum.xda-developers.com/showthread.php?t=390846
I'm using PHM Registry Editor it allows me to do the following tasks:
Explore the registry to find the operating system and applications configuration,
modify system and applications tweeks not available from the standard options screens,
export all or parts of the registry to .reg files,
backup and restore the complete registry and
perform search on the registry data
Have fun everyone with editing/creating/modifying/wrecking,
Senax

Categories

Resources