can't access tty... (it said) - Touch Cruise Android Development

Hie,
I installed all the stuffes:
haretinstall.zip and polymod2.1.zip (installAndroid.tar inside)
change defautl.txt.
Putting a small system.img find on sourceforge.
And reboot via haret with my finger on the f... button. And it's ok, beautiful menu, choosing the 1. Install system and gooooo... after a moment back to this menu, choose the 10 . quit and my HTC reboot on linux..... and a the end got this :
mount:mounting /data/sysfiles/su on system/bin/su failed no such file or directory
ANDROID sh:can't access tty: job turn off #
and after a few moment some quadricolor lines appers and nothing more. I just open it and take away the battery for reboot on Windows...
What shall i do ? I retry this after reformatting my sd card as i read somewhere, but nothing change...
ROM : 1.25.163.3 FRE / radio : 1.58.21.23

have a little more patience, it can take a long time.
If it isn't working, try updating your radio rom

btw, I get the same message but it does boot in the end

Related

My Magician is dead can you help ?

So i try to upgrade my rom with an official tmobile rom, i've got the mda mini, and it didn't work, it stopped midway saying that an error occur while upgrading the radio stack, now i try different rom, different download of the same different rom, nothing seem to work, it alway stop at 20% of the radio upgrade and tell me that an error occur and that i have to reboot my device and try again, i search many hours on the forum to see the same problem, but i found nothing, is my mda dead, i kinda like it very much, so small, so cute with a winamp skin on the player it was putting a shame to every i pod i know off,
please I'm begging you, help me revive my poor Mda, i even bought a bluetooth stereo head set just for it, too enhance the ipod killer theme.... tell me i didn't do this for nothing !!!!
thank you
I guess it's realy dead
oky, no more chance for this poor mda,
I will have the ceremony down tonignt then i will burn it and spreed the ashes over internet.
Sigiel said:
oky, no more chance for this poor mda,
I will have the ceremony down tonignt then i will burn it and spreed the ashes over internet.
Click to expand...
Click to collapse
Bad news, my PDA likes yours, it cannot flash any rom now...
It's possible to revive them...but you'll need a special SD Card Image ROM...
Google a little bit about .nbh images, SD Rom Boot images, etc.
Once you have this special SD Card ROM Boot image prepared, you put it on the phone, put the phone in bootloader mode (camera + power + reset),and check the screen: - a message will appear telling you to "press power to flash", and you do it. Let it flash and reboot.
Magician revived.
Best Regards,
Keeper
Keeper said:
It's possible to revive them...but you'll need a special SD Card Image ROM...
Google a little bit about .nbh images, SD Rom Boot images, etc.
Once you have this special SD Card ROM Boot image prepared, you put it on the phone, put the phone in bootloader mode (camera + power + reset),and check the screen: - a message will appear telling you to "press power to flash", and you do it. let it flash and reboot.
Magician revived.
Best Regards,
Keeper
Click to expand...
Click to collapse
The file header of the SD Card ROM must be the same of my magician ROM, isn't it? Now the problem is I can't get the header of my magician ROM, when I use "d2s" command the magician dead.
Well i don't quite get what you mean by "header of Magician ROM"....i assume that you are refering to the bootloader...what version do you have? Does it says 1.2 or 1.0? Have you tried to flash a different bootloader from a different model or something?
Anyway, I don't quite get what is your problem exactly - Is it with the Radio part or windows part? Does the WM2003se boots or not ?
- If your problem is only with the WM2k3 not booting, then you must upgrade only with a ROM image for the OS (nk.nbf) - (Try and use an original ROM first...don't you use cooked ROMs.)
- If it's both WM2K3 and radio, then you need to put the nk.nbf and radio_.nbf on the same directory where the MaUpgradeUt.exe is.
- If you also want to upgrade your Extended ROM, then beside both files mentioned, you also need to have the ms_.nbf.
Anyway, regarding the radio part: try this: google for "MagicianRadio_1.13.00_maupgrade"
Finally: don't forget that you need to download and use the "MaUpgradeUt_noID.exe" or the magician will complain about the country code error + some BS.
Best Regards,
Keeper
I heard that the front 416 bytes of SD card ROM image must be the same as the PDA, and then can falsh it. The front 416 bytes of every PDA ROM are different, so I must get my magician ROM header (416B), but I cannot.
My magician can boot, but cannot be flashed a new rom. The error code returned to me is "Get Device Data Error".
btw, the bootloader is v1.02, how can I reflash a new bootloader? I don't know how to do that, maybe it can resolve the problem.
Forget about changing the bootloader - you could end up with a brick on your hands...besides, that's the latest (final?) version of the bootloader for magicians.
Anyway, that message seems to be related to usb data transfer between your pc and your phone...you DID disabled the "Allow USB Connections" on ActiveSync BEFORE TRYING to do an upgrade, didn't you?
If you use windows Vista, there's a known problem when trying to flash a new ROM with it...
check this link on how to use vista for ROM upgrades: http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
Best Regards,
Keeper
My system is Windows XP, thank you all the same.
Okey, try this:
1) Download this image: http://www.t-mobile.nl/zakelijk/media/download/MA_TMNL_11300_132_11200_Ship.exe
(It's an original image from T-Mobile).
2) Extract the .exe content using winrar.
You will get the following files:
- EnterBL.exe
- GetDeviceData.exe
- RUU.dll
- RUU.conf
- UI.dll
- ROMUpgradeUt.exe
- nk.nbf
- ms_.nbf
- radio_.nbf
3) Delete the ms_.nbf, radio_.nbf and ROMUpgradeUt.exe files.
4) donwload this file: ftp://xda:[email protected]/Magician/Tools/MaUpgradeUt_noID.exe ...and put it on the above directory.
5) disable ActiveSync "allow usb connections".
6) put your phone in bootloader mode
7) run MaUpgradeUt_noID.exe and let it finish. (It may take some time...)
8) hard reset your phone.
Now, if you want to try to upgrade just the radio, repeat the above steps but delete the nk.nbf from that directory and and put a radio_.nbf there.
NOTE: You WILL loose everything that you've got stored on your phone...contacts, sms, etc...so do a backup 1st if you want.
Regards,
Keeper
It not worked. The RUU.log is this:
00:01:01:890 [msg] : Version : [1.5.0].
00:01:01:890 [msg] : Config Info : [776571],[1],[1],[0].
00:01:01:890 [msg] : RadioFile Not Exist !
00:01:01:890 [msg] : MSystemFile Not Exist !
00:01:05:703 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
00:01:09:828 [msg] : Disconnect ActiveSync .... [2]
00:01:09:968 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
00:02:48:281 [err] : BL Get Device Data Error.
00:02:48:281 [msg] : Update Image. CE : [4], MSystem : [0], Radio : [0]
I clicked "Upgrade" and it displayed "checking the information of your device..."...
Okey...the only way i see it, is to try an SD Card Upgrade.
I can try and craft you an image for your SD Card but i don't know if it will work on your SD Card... What's the size(s) of your SD Card (s)?
I don't want to e-mail you 1Gb image (i only have 1 and 2Gb SD Cards) and has so i need to do this ( http://buzzdev.net/index.php?option=com_content&task=view&id=18&Itemid=41 )...which i've never tried...so let's hope that the SD Card header won't be a problem...
Anyway, i can't do it now...i'll pm you later on, when i get some free time.
Regards,
Keeper
Thank you.
I have a 2 GB SD Card, but it didn't work, I think the reason maybe the header of the SD Card Image not modified. But I cannot get the header of my PDA.
Okey, here we go.
Do this:
1) Download this Emergency SD Card image: http://rapidshare.com/files/56985459/Emergency_SD_Card_Image.rar.html
2) Download the NTRW in attachment
3) Format your SD Card using windows XP format option
4) Copy both files (ntrw.exe and SDCard.img) to your C:\
5) Open a dos command prompt and type: ntrw write SDCard.img <sd card reader drive letter>
( do note that <sd card reader drive letter> must be replaced with your own SD card reader drive letter...example: "ntrw write SDCard.img e:". Also do note that when writing to the SD Card, some errors might appear...ignore them...the image is/will be there in your SD Card)
6) Put your phone in bootloader mode
7) Connect the usb cable or power cord to your phone (This is a MUST! or you won't see the next step)
8) Insert the SD Card on your phone and check if the screen message changes to something like " Press power to flash "
9) Do has told: press the power button and WAIT! (if it seems to stop, leave it that way...it will eventually end the upgrade)
10) Hard reset your phone when the upgrade ends.
Note 1: This SD image and procedure was tested on my phone and it works. The image itself is an original T-Mobile ROM 1.13.
Tell me how it went.
Best Regards,
Keeper
Happy to hear you again. But I cannot download the image. I will try.
I do this step by step, but after I inserted the SD Card on my phone, the screen message didn't change, it was "USB V1.02", if I disconnected the usb cable, it changed to "Serial V1.02".
It can't be...This image is in perfect shape. you must be doing something wrong or your bootloader is damaged seriously...
check this out:
- Your USB cable must be connected to your PC and ALSO to the Magician.
- Check if ActiveSync USB option is disabled.
- If both of the above are true, leave the SD Card inside the mini, and press camera + power + reset button again...(i've read that sometimes the process doesn't work at the first time...)
- Try to disconnect and connect the USB cable from your magician, with the SD Card inserted on the phone...check is the message on the screen changes...
Please post what you have tried already...
If nothing works, that means that your bootloader is f* up. You'll have to wait a little bit more so to give me time to check how to prepare an SD image (or an alternative way) for upgrading your bootloader.
Keeper
It not worked.
I just did as what you said. If I pressed camera + power + reset button with the SD Card inside, the screen was not changed even if I connected / disconnected the usb cable; but if I pressed camera + power + reset button without the SD Card inside, and inserted SD Card under bootloader mode, the screen can change from "USB" to "Serial", but I didn't see " Press power to flash ".
I think my Magician bootloader was corrupted, because the screen showed nothing after I typed "d2s" in MTTY. But I don't know how to upgrate bootloader.
Thank you very much.
Now I find a new problem: I couldn't delete some fonts files stored in "/storage/fonts", even if I hard reset PDA. After I setup a new font named QooQooCN, I cannot uninstall it, seems wince.nls running. But I still cannot delete /storage/fonts/*.ttf files. Why? If this is the reason why I cannot reflash my PDA?
Need help.
Coly, here it is the 1.02 bootloader from my device. Put it on your formated sd card like explained previously. Reboot in bootloader mode with the sd card inserted and with the USB cable connected...see if now you can get the "press power to flash"
If it still doesn't work, we will have to crack the passwords for the bootloader debug mode.
anyway, post your results, please.
Keeper

How to install Android on my Sd for My HTC HD2

To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
mallfox said:
To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
Click to expand...
Click to collapse
First of all tell me about your hd2, what rom is it currently running (stock 2.08, 3.14?) , what radio do you have? Whats your sd card?
All these questions are relevant to make droid work.
I'm not sure if this will work or not. But I had a similar problem when I first rooted my HD2. Under the Android folder, there is a text file: startup.txt
Open it up. The last line I've found typically reads "boot". Now, I don't know if this affects everyone. But after reading for 18+ hours when I first rooted my phone, I remembered reading somewhere that that particular line should read "bootlinux". And I've found that no matter what build I use, if I don't change it to bootlinux, it wouldn't get past the HTC. So try adding "linux" after the "boot". Then try starting it up again with CLRCAD.exe then haret.exe.
Hope that works for you.
RAM 576... OS version 5.2.2191 (21913.5.0.94) ... manilla version 2.5.20181424.0 ...Rom version 3.14.53.1(04666) WWE ... Radion version 2.15.50.14 ... SD card is Fat32.. i have tried alot of programs and have yet to get it to work . and i thank you both for your input I dont know what else to do...
mallfox said:
RAM 576... OS version 5.2.2191 (21913.5.0.94) ... manilla version 2.5.20181424.0 ...Rom version 3.14.53.1(04666) WWE ... Radion version 2.15.50.14 ... SD card is Fat32.. i have tried alot of programs and have yet to get it to work . and i thank you both for your input I dont know what else to do...
Click to expand...
Click to collapse
Did you erase all other content from your sd card, and was the content put in a named folder called Android?
GUIDE (yes another one) for ANDROID on HD2
mallfox said:
RAM 576... OS version 5.2.2191 (21913.5.0.94) ... manilla version 2.5.20181424.0 ...Rom version 3.14.53.1(04666) WWE ... Radion version 2.15.50.14 ... SD card is Fat32.. i have tried alot of programs and have yet to get it to work . and i thank you both for your input I dont know what else to do...
Click to expand...
Click to collapse
Here hope this helps! any questions feel free to ask...
I just posted this in another thread to clear some things up for some guys ...... hope this clears up the process for you a bit
............................excerpted from previous post........................................
********BTW i have attached a little template that i use when flashing various roms and storing them on my PC. has task29, HSPL & MAGLDR already in it. all u need to do is go to the xda hd2 master radio thread to grab your appropriate radio and put that into the empty radio file. then find the rom you want to test out and usually the developer will have both rom (obviously) and the appropriate CWM that u should use with it and just put those in their respective empty folders i have in the attached file. that way all the steps below will line up to the files i have attached
OH YEAH, FORGOT... THESE STEPS ARE TO BE DONE AFTER THE INITIAL PREREQUISITES i.e. windows mobile device center, activesync, proper spl version...blah blah blah
--------the following steps 1 - 4 are to be preformed while at the tri-color boot screen (easiest way to reach is to turn off your phone while its connected to your PC then immediately hold volume down button till you see it n wait for it to say usb in the white section).
(by the way your device will ALWAYS automatically restart itself after a couple seconds if it is shut down while plugged in via USB to either a wall/car charger or hooked up to a PC this is normal and a small hiccup either due to the use of magldr or the hspl but dont worry)...cant quite remember
1. run task 29
-double click the only icon in file if your using the one provided by doloop
-wait for it to run and do its thing. when its finished it will automatically turn off your device so be sure to hold down the volume key as soon as it does.
2. install radio
-run the "customRUU" file with the HD2 icon in the radio of your choosing
-it will operate in a similar fashion as the task 29, automatically turning off device upon completion.... down on the vol key
3. install hspl3/hspl4
-run the "HSPL3_PKG/HSPL4_PKG" file. should be the only one in there
-make sure you select 2.08.HSPL in the setup and it will execute itself just like the installers in the previous two steps n turn off your phone... down vol key
4. install magldr113
-make sure your selecting "rom update utility" in the magldr113 file. dont run the "DAF" it wont work properly if you do and youll get errors
-BUT THIS TIME AS IT TURNS ITSELF OFF HOLD DOWN THE POWER BUTTON ON YOUR DEVICE AS IT BOOTS UP UNTIL U GET TO MAGLDR AND CONTINUE TO HOLD IT DOWN UNTIL YOU SEE ABOUT 12 DIFFERENT OPTIONS...
5. install CWM recovery
-go to option 5 "USB Flasher" and hit the green call key. wait a few moments till it shows USB....USB make sure the second usb pops up and your PC recognizes the connection. then when it does sync you get to......
-while still in the usb flasher mode above, simply run you desired CWM recovery which should the one your developer recommends for the builds as the requirements tend to vary from rom to rom.
-this is achieved by selecting the "DAF" file from the clockworkmod recovery your using
-and again this installer will shut off your device upon completion and HOLD DOWN THE POWER KEY LIKE ABOVE TILL YOUR BACK AT THE MAGLDR MAIN MENU (with options 1-12).
6. install rom
-now go to option 8 "AD Recovery" and hit the green call button to enter into the CWM recovery u just installed
-after it loads up (GO!GO!GO!) go down to the "mounts and storage" option that is third from the bottom and hit the call key.
-once there go to the last option "mount USB storage" and hit the call key.
-give your PC a few moments to recognize the sd card for your device and choose to open it when your PC prompts with the regular file explorer or just find it and double click on the newly recognized drive (sdcard) if your PC doesnt auto prompt you.
-now the new drive (sdcard) should be empty (depending...) then just find the desired rom you chose to use, right click on it and copy.....then over to the new drive (sdcard) and paste. might take a min or two depending on the roms size
-once the copying is complete hit the call button to "unmount" your sdcard then the back button on your device till your back at the CWM main screen
-now go to the fifth option down and "install zip from sdcard" and hit the call button
-now select the second option "choose zip from sdcard" and select the zip file you just copied to your sdcard. then it will begin to install the rom and all rom install times vary by build. some take a minute, some seem like they take forever.
-once installation is complete hit the back button till your back at CWM main screen and choose the last option which is to "power off"
-then tap the power button(if u unplugged it from usb otherwise it wil reboot by itself) to turn on your device and give it some time for the initial boot and load as it has to set up everything u just installed. subsequent boot wont take as long but again it can all vary from rom to rom.
-after initial load and a successful bootup you should arrive at ether the lockscreen or a startup screen. give the rom a few more mins to settle and dont hit any buttons. then unlock the device or skip through the startup options and get to the home screen. maybe give it another min to settle the launcher and the last bit of data and resist the urge to mess with the features. your gonna hate this but hold down the power button and select power off device from the popup menu. i know it sucks but it is best practice when flashing roms. after device shuts off wait a few seconds and turn it back on and let it reboot. should be faster this time and when u get to your lockscreen simply give it a few seconds to settle again, unlock and go to main launcher a wait a couple more seconds for it to finish settling and.....have fun! (every time i restart my device for any reason i will always give it a few moments to finish loading up before just blazing away with the apps)
WOW! maybe its not so abridged after all, but oh well tried my best to be as clear as possible so people can utilize their HD2 to its fullest potential.
HOPE THIS HELPS AND IF INDEED I HAVE PLEASE HIT THE THANKS BUTTON
MEG4LOM4NI4C said:
Here hope this helps! any questions feel free to ask...
I just posted this in another thread to clear some things up for some guys ...... hope this clears up the process for you a bit
............................excerpted from previous post........................................
********BTW i have attached a little template that i use when flashing various roms and storing them on my PC. has task29, HSPL & MAGLDR already in it. all u need to do is go to the xda hd2 master radio thread to grab your appropriate radio and put that into the empty radio file. then find the rom you want to test out and usually the developer will have both rom (obviously) and the appropriate CWM that u should use with it and just put those in their respective empty folders i have in the attached file. that way all the steps below will line up to the files i have attached
OH YEAH, FORGOT... THESE STEPS ARE TO BE DONE AFTER THE INITIAL PREREQUISITES i.e. windows mobile device center, activesync, proper spl version...blah blah blah
--------the following steps 1 - 4 are to be preformed while at the tri-color boot screen (easiest way to reach is to turn off your phone while its connected to your PC then immediately hold volume down button till you see it n wait for it to say usb in the white section).
(by the way your device will ALWAYS automatically restart itself after a couple seconds if it is shut down while plugged in via USB to either a wall/car charger or hooked up to a PC this is normal and a small hiccup either due to the use of magldr or the hspl but dont worry)...cant quite remember
1. run task 29
-double click the only icon in file if your using the one provided by doloop
-wait for it to run and do its thing. when its finished it will automatically turn off your device so be sure to hold down the volume key as soon as it does.
2. install radio
-run the "customRUU" file with the HD2 icon in the radio of your choosing
-it will operate in a similar fashion as the task 29, automatically turning off device upon completion.... down on the vol key
3. install hspl3/hspl4
-run the "HSPL3_PKG/HSPL4_PKG" file. should be the only one in there
-make sure you select 2.08.HSPL in the setup and it will execute itself just like the installers in the previous two steps n turn off your phone... down vol key
4. install magldr113
-make sure your selecting "rom update utility" in the magldr113 file. dont run the "DAF" it wont work properly if you do and youll get errors
-BUT THIS TIME AS IT TURNS ITSELF OFF HOLD DOWN THE POWER BUTTON ON YOUR DEVICE AS IT BOOTS UP UNTIL U GET TO MAGLDR AND CONTINUE TO HOLD IT DOWN UNTIL YOU SEE ABOUT 12 DIFFERENT OPTIONS...
5. install CWM recovery
-go to option 5 "USB Flasher" and hit the green call key. wait a few moments till it shows USB....USB make sure the second usb pops up and your PC recognizes the connection. then when it does sync you get to......
-while still in the usb flasher mode above, simply run you desired CWM recovery which should the one your developer recommends for the builds as the requirements tend to vary from rom to rom.
-this is achieved by selecting the "DAF" file from the clockworkmod recovery your using
-and again this installer will shut off your device upon completion and HOLD DOWN THE POWER KEY LIKE ABOVE TILL YOUR BACK AT THE MAGLDR MAIN MENU (with options 1-12).
6. install rom
-now go to option 8 "AD Recovery" and hit the green call button to enter into the CWM recovery u just installed
-after it loads up (GO!GO!GO!) go down to the "mounts and storage" option that is third from the bottom and hit the call key.
-once there go to the last option "mount USB storage" and hit the call key.
-give your PC a few moments to recognize the sd card for your device and choose to open it when your PC prompts with the regular file explorer or just find it and double click on the newly recognized drive (sdcard) if your PC doesnt auto prompt you.
-now the new drive (sdcard) should be empty (depending...) then just find the desired rom you chose to use, right click on it and copy.....then over to the new drive (sdcard) and paste. might take a min or two depending on the roms size
-once the copying is complete hit the call button to "unmount" your sdcard then the back button on your device till your back at the CWM main screen
-now go to the fifth option down and "install zip from sdcard" and hit the call button
-now select the second option "choose zip from sdcard" and select the zip file you just copied to your sdcard. then it will begin to install the rom and all rom install times vary by build. some take a minute, some seem like they take forever.
-once installation is complete hit the back button till your back at CWM main screen and choose the last option which is to "power off"
-then tap the power button(if u unplugged it from usb otherwise it wil reboot by itself) to turn on your device and give it some time for the initial boot and load as it has to set up everything u just installed. subsequent boot wont take as long but again it can all vary from rom to rom.
-after initial load and a successful bootup you should arrive at ether the lockscreen or a startup screen. give the rom a few more mins to settle and dont hit any buttons. then unlock the device or skip through the startup options and get to the home screen. maybe give it another min to settle the launcher and the last bit of data and resist the urge to mess with the features. your gonna hate this but hold down the power button and select power off device from the popup menu. i know it sucks but it is best practice when flashing roms. after device shuts off wait a few seconds and turn it back on and let it reboot. should be faster this time and when u get to your lockscreen simply give it a few seconds to settle again, unlock and go to main launcher a wait a couple more seconds for it to finish settling and.....have fun! (every time i restart my device for any reason i will always give it a few moments to finish loading up before just blazing away with the apps)
WOW! maybe its not so abridged after all, but oh well tried my best to be as clear as possible so people can utilize their HD2 to its fullest potential.
HOPE THIS HELPS AND IF INDEED I HAVE PLEASE HIT THE THANKS BUTTON
Click to expand...
Click to collapse
Thanks
help needed complete noob
Hi all...total noob in need of expert advice...i have a htc hd2..it had windows 6.5 so upping to android hopefully. the step I am getting stuck on is installing from memory card. radio is 2.5,magdlr 113, clockwork is installed and spl 2.08.hspl.
What I am getting is the following.
Installing: /sdcard/.android/update.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(bad)
Installation aborted.
I have been trying for a week with no success.. Help.
Thanks in advance.
It could be a corrupted zip. Try downloading again, if you've not tried that.
Sent from my GT-I9100 using Tapatalk
Hi..Thanks for the reply. I have downloaded many firmwares and still no joy.Rather annoying really as its just the last step and really need to finish it off. Anyone having a android firmware I could download? Again thanks in advance.
Finally managed to put android 2.2 on, don't know how but it is on there...but no connection to the internet, it says on the setting for mobile network no connection.
If someone could list how exactly to put android on my hd2 in lamans terms (lol) I would really appreciate it..i.e. what to flash first and so on.
I dont know if you read the following guides but they are pretty awesome. Follow the first link in order to get 2.2 on. I know you said you did it but I would do it again since I dont like starting in between steps, rather do it start to finish. Follow the second link to put another ROM on.
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=1044830

UK G1 (DRC92) - Just wanna install Froyo - VERY confused

Hiya!
So, I am no android beginner, but to me there seems to be a continual branching off & fragmentation (and obsolescence) in tutorials, howto's etc etc.
This is what I have: UK T-mobile G1, running Android 1.6, build DRC92
This is what I want: UK T-mobile G1, running Android 2.2 or higher
This is what irritates me: 1001 different tutorials, each of which (wrongly) *assume* you know what you are doing with this particular handset
I know what I am doing with ZTE, and Android OS in general, but I want to get this CLEAR, as clear as crystal, and I want to do it by following a SIMPLE, non-ambiguous, non-assuming tutorial. That SHOULD be simple, but it seems not.
I need to upgrade "SPL" and "RADIO". I need this explaining please, in as much detail as you can, if you don't mind?
I am sorry to sound demanding, but this whole process is a minefield of conflicting opinions, geek ego battles and preferences... and ALL I wanna do is upgrade!
Please, any help?
PLEASE: I ask that you don't just simply link me to other tutorials, as I am confused about how to do this, and that will just set me back to square one again. If you are able to spare a few minutes to explain what to do, I would be most grateful.
Thank you!
It is hard not to link you to the instruction that is already there. But I do understand your frustration. When I first started I had the same (similar problem) and end up following one of the instruction. FYI, the only links I posted is the recommended Froyo ROM. It has Android 2.2.1.
Simply put, here is from Instruction I have when I first rooted my G1:
Disclaimer:
WARNING: I am not responsible if you did something to brick your phone.
Disclaimer:
I FOUND THIS TO BE THE EASIEST METHOD OF ROOTING A G1 AND INSTALLING A STABLE BUILD OF FROYO.
THIS IS DESIGNED FOR THE COMPLETE BEGINNER!!
I HAVE THIS ON MY G1 WITH NO PROBLEMS AT ALL!!!
Rooting Your Stock T-Mobile G1 (HTC DREAM) AND INSTALLING A STABLE ANDROID 2.2 FROYO BUILD.
**Please make sure your phone is completely charged before doing this**
**I am not responsible for anything that happens to your phone. Do this at your own risk**
---------------------------------------------------------------------------------------------
I was pretty worried about bricking my phone, but it is almost impossible if you do this step by step and correctly. Just make sure to follow the steps!
---------------------------------------------------------------------------------------------
Prerequisites:
**ALL DATA/APPLICATIONS WILL BE REMOVED FROM YOUR PHONE AND IT WILL BE RETURNED TO FACTORY SETTINGS AFTER THE FOLLOWING STEPS. MAKE SURE YOU HAVE SYNC SET UP FOR YOUR DATA SO THAT YOU CAN RECOVER YOUR CONTACTS!** (TO SYNC GO TO SETTING > DATA SYNChronization > make sure AUTO SYNC is checked as well as contacts calendar and gmail)
Here is what you will need:
1) Your Phone
2) A Computer
3) USB Cable
Download the following file onto your computer: (DO NOT UNZIP OR CHANGE ANY FILES!)
ALL THE LINKS TO DOWNLOAD THE FILES ARE HERE: pktos.blogspot.com
Original DREAIMG.nbh (make sure you download the UK version)
Cupcake Update.zip
FlashRec.apk
Amon Ra’s Recovery Image
G1 Radio
G1 HardSPL
Generic G1 ROM w/ Root
GAPPS (if you wants it)
ALL THE LINKS TO DOWNLOAD THE FILES ARE HERE: pktos.blogspot.com
---Froyo ROM---
Recommended Froyo ROM: Froyo Melt with custom theme or DreamTem Froyo.
---Froyo ROM---
-------------------------------------------------------------------------------------------
I) Formatting the SD Card and Downgrading to RC29(YOU WILL DELETE EVERYTHING OFF YOUR SD CARD!)
1. Plug your USB cable into your computer and then plug your phone in.
2. Mount your SD card by sliding down the notification bar and selecting mount.
3. Go to My Computer and access your SD card.
4. BACKUP ANY FILES THAT YOU WANT ONTO YOUR COMPUTER. VERY IMPORTANT!
5. Go back to my computer and right click on the drive that is your sd card. Click format. Choose FAT32 from the drop down and hit the format button. This removes all data from your memory card.
6. Once the format is complete: drag and drop "DREAIMG.nbh & Update.zip files that you downloaded into the sd card. (DO NOT create a folder or anything, just put it right in the SD card)
7. Unmount your phone by going through the notification bar and then unplug your phone Turn your phone off. from your computer.
8. Press and hold the camera+end key until until you see a screen with colored bars, then let go. This is the bootloader. The screen will turn gray with blue writing on it.
9. Hit the end key to start the update. DON'T DO ANYTHING UNTIL THIS IS DONE!
10. Once it is finished it press the trackball to reboot. (If it goes back the the colored bar screen and doesn't reboot try holding the home+menu+end key, if this doesn't work, just remove the batter and put it back in and turn the phone on)
11. Once the phone is on, just turn it back off.
12. Now press the Home+End Key until you see a triangle with an exclamation point in it (this is recovery mode). Once you see this let go of the buttons.
13. Open the keyboard and press ALT and L, and then Press ALT and S. Now wait until the phone reboots (it will do this automatically once the update is applied) (Don't worry if you see picture of a box and a g1 or a chip with an arrow)
14. Once the phone reboots, go ahead and and go through the welcome guide and get to the home screen.
II) Flashing a Recovery Image
1. Now with your phone at the home screen, go to settings>applications> an turn on unknown sources.
2. Now go to settings>SD card and Phone Storage>Unmount SD Card
3. Now Click format sd card and go ahead and format your sd card. It will automatically remount after.
4. Go back to the home screen and plug and mount the phone to the computer again as you did earlier.
5. Place the following files you downloaded earlier right into the sd card: FlashRec.apk, and Amon Ra's Recovery Image (Again not in any folder or anything, just on the sd card)
6. Once they are transferred go ahead and unmount and unplug your phone from the computer
7. Go and download a file manager from the android market (I suggest LINDA FILE MANAGER)
8. Once downloaded, open the file manager and go to SD card, and click the FlashRec.apk file and then click install. If it asks -> Tell it to use package installer to open it (it probably wont ask but if it does)
9. Once installed click open (it will be on bottom left of screen)
10. Then click the button that says "backup recovery image"
11. Once it says "backup complete" open the keyboard and type the following: /sdcard/recovery.img
12. The click "flash custom recover image" and wit until it says "Flash complete"
13. Go back to the home screen and then turn off the phone.
14. Turn the phone back on into recovery mode by holding down the home and power buttons. You will see a bunch of text on top of a black background with an HTC logo in the middle.
III) Partitioning and Loading the latest radio
1. Scroll down to "Partition SD Card"
2. Click "Partition SD"
3. Press the Home key to confirm
4. Use the trackball to increase the "swap size" to 96MB then press Home key
5. Make sure "EXT2" is set to 512 MB then Click the Home Key
6. Make sure "Fat32 size" is set to remainder and then press the Home Key and then the phone will begin partitioning.
7. Once partitioning is complete scroll down and select to "SD: ext2 to ext3" and then press the Home key. Wait for it to upgrade.
8. Once the Upgrade is complete hit the "back" button to get back to the main menu. Then scroll down and select "USB-MS Toggle" and wait for it to enable.
9. Now plug the phone into the computer again. Now transfer the files downloaded earlier: G1 Radio, G1 HardSPL, Generic G1 Rom w/ root, to the phone. (AGAIN KEEP THE FILES JUST IN THE SD CARD AND NOT IN A FOLDER OR SOMETHING)
10. Once the transfer is complete hit the Home key to disable the USB-MS toggle and return back to the main menu of recovery mode. Unplug your phone.
11. Scroll down and select "Flash .zip from SDcard"
12. Select the G1 Radio file (named OTA Radio or something like that) and hit the Home key to confirm. DO NOT SELECT ANY OTHER FILE, THE RADIO MUST BE DONE FIRST.
13. Once the Radio Flash is complete Press Home+Back to reboot the phone. It will then say "writing radio image" and then reboot back into recover mode (this will take some time)
14. Once back into recovery mode, scroll and select "Flash zip from SDcard" again.
15. This time choose the SPL file (named somthing like "Latest G1 SPL.zip") and then click the HOME KEY to confirm.
16. Once it finishes, hit HOME+Back to reboot once again. It will say "writing boot image" and then reboot
back to recovery mode.
17. Once again scroll to "Flash zip from SDCard" and choose the Generic G1 Rom file (Named something like Generic G1 Root Rom.zip) and click Home to confirm and wait for it to finish.
18. Once finished it should go back to the main menu and say"Install from SD card complete"
19. Now click on the "Reboot System Now" choice. (Home+Back)
20. Wait for the phone to reboot back into Android.
IV)Installing ROM (Android 2.2.x Froyo for HTC DREAM)
1. Once back into Android, turn the phone back off.
2. Hold the Home+Back keys to turn the phone on and get it back into recovery mode
3. Select "USB-MS Toggle" and wait for it to enable
4. Once enabled, plug your phone in and transfer the CYANOGENMOD6 and GAPPS file ito your SD card/phone. (again not in any folder, just in the sd card)
5. Once the files are transferred, press the Home key to disable USB-MS Toggle and return to the main menu, and then unplug your phone.
6. Scroll down and select "wipe" and then select "wipe data / factory reset" and then hit the Home key to confirm. Wait for it to finish the wipe. It will say "Data wipe complete"
7. Hit the back key to return to the main menu.
8. Scroll and select "Flash Zip from SDCard"
9. Select the ROM Named that you have downloaded and hit Home to confirm and wait for it to finish.
10. Once finished it will go back to the main menu and say "Install from SD Card Complete"
11. Go back to "Flash Zip from SDCard"
12. Select the Gapps File Named something like "gapps-mdpi-FRF91-3-signed.zip" and click home to confirm.
13. Once it is finished you should be back at the main menu. Select "Reboot System Now" and wait for the phone to reboot.
14. The reboot will take some time, (roughly 5-10 minutes) so don't freak out. Just put your phone down and go do something =)
CONGRATS! YOU have successfully rooted your G1 and installed ANDROID 2.2.x Froyo
Click to expand...
Click to collapse
BeenAndroidized said:
It is hard not to link you to the instruction that is already there. But I do understand your frustration. When I first started I had the same (similar problem) and end up following one of the instruction. FYI, the only links I posted is the recommended Froyo ROM. It has Android 2.2.1.
Simply put, here is from Instruction I have when I first rooted my G1:
Disclaimer:
WARNING: I am not responsible if you did something to brick your phone.
Disclaimer:
Click to expand...
Click to collapse
My build is DRC92, and from what I gather, I need a "gold card" (impossible to find somewhere to generate the image!)
I give up.
Have you try this software to create Goldcard?
http://forum.xda-developers.com/showpost.php?p=11655667&postcount=1
BeenAndroidized said:
Have you try this software to create Goldcard?
http://forum.xda-developers.com/showpost.php?p=11655667&postcount=1
Click to expand...
Click to collapse
Okay. I finally got revskills site to send me a goldcard IMG. All updated, just putting FroSense 10 on now.... MAN. It takes AGES to boot first time! lol
Thank you for helping me! God bless you.
glossywhite said:
Okay. I finally got revskills site to send me a goldcard IMG. All updated, just putting FroSense 10 on now.... MAN. It takes AGES to boot first time! lol
Click to expand...
Click to collapse
Yes, it does take time for the first boot, especially FroSense. Glad you got it going though.
glossywhite said:
Thank you for helping me! God bless you.
Click to expand...
Click to collapse
Glad to be of services... And anytime...
glossywhite said:
Hiya!
So, I am no android beginner, but to me there seems to be a continual branching off & fragmentation (and obsolescence) in tutorials, howto's etc etc.
This is what I have: UK T-mobile G1, running Android 1.6, build DRC92
This is what I want: UK T-mobile G1, running Android 2.2 or higher
This is what irritates me: 1001 different tutorials, each of which (wrongly) *assume* you know what you are doing with this particular handset
I know what I am doing with ZTE, and Android OS in general, but I want to get this CLEAR, as clear as crystal, and I want to do it by following a SIMPLE, non-ambiguous, non-assuming tutorial. That SHOULD be simple, but it seems not.
I need to upgrade "SPL" and "RADIO". I need this explaining please, in as much detail as you can, if you don't mind?
I am sorry to sound demanding, but this whole process is a minefield of conflicting opinions, geek ego battles and preferences... and ALL I wanna do is upgrade!
Please, any help?
PLEASE: I ask that you don't just simply link me to other tutorials, as I am confused about how to do this, and that will just set me back to square one again. If you are able to spare a few minutes to explain what to do, I would be most grateful.
Thank you!
Click to expand...
Click to collapse
Well first of all this isn't Q&A this is a development section, second look for the guide in the dev section, its easy to follow and not complicated at all, download a few files, blah blah blah your done. Took me 5 minutes.
Sent from my T-Mobile G1 using XDA App
i won`t go down to rc29. on market is an application named universal androot which works on htc dream ( 1.5 and higher ). this will root your phone but until you`ll restart the phone, you`ll have to flash recovery image ( amon-ra-1.7.0 ). after you restart your phone and still have root privilegies, that`s a good moment to change SPL. ezTerry`s tutorial i think is the best there is.
flash another rom. i am using now Nameless jedi`s rom maybe because i find it the best or just because i`m a star wars fan
i did not covered it all in this post ( i`m pretty sure ) so if your stuck in there somewhere ( android related ) you can IM me anytime. maybe we`ll even try a live installfest
p.s. the dreaimg.nbh is a "good to have" file. although i hope you`ll never use it.

Unroot from Microsd help

I've looked every I'm running insert coin ics rom for the HTC sensation. The charger and the usb data slot is snapped i can charge but cant flash from the comp. Or read data from the phone.
I need to unroot from the microsd card back to stock ics in uk orange is this poss?? As i need my warranty back please help
I've found this post -
METHOD 2 - ENG HBOOT
Now the method I found to debrand (rather than messing about with CIDs), is using an ENG HBOOT, this is only temporary as the ROM we flash later on overwrites it.
Grab the file below (thanks to Bin4ry), and put it in the root of your SD Card. (i.e. if your on Windows, X:/ [where X is the letter of your Sensation's SD Card])
Quoteriginally Posted by Bin4ry
ENG Hboot:
[thanks Rahan95 for dumping ]
http://81.89.105.12/~bin4ry/hboot/PG58IMG.zip
Flash ENG HBOOT
1. EITHER:
1a. Shut down your phone, then take out your battery and put it back in.
OR:
1b. Make sure fastboot is disabled in settings and shut down your phone (This can be done via Settings > Power> Untick "FAST BOOT" at the bottom.)
2. Keep hold of the volume down button and switch your phone on.
3. When it asks "Do you want to start the update", press Volume Up to accept
5. Press Power Off to reboot back to normal homescreen
6. Remove PG58IMG.zip from your memory card
Download an RUU
1. You now need to pick the RUU you wish to flash, a good source is this thread:
http://forum.xda-developers.com/show....php?t=1074559
To debrand my Vodafone Sensation, I chose "RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.90 0 7.00U_10.51.9007.27_M3_release_198179_signed"
2. Once you have downloaded the RUU you would like to flash, run it (it can take a while to load), and stop when you get the welcome screen, which has a picture of a Sensation on the left and a red caution notice on the right.
3. Move this window out of the way (it forces itself into foreground), then open up windows explorer and go to:
C:\Users\[username]\AppData\Local\Temp
4. Then sort by Date Modified. Find the newest folder with a long random sequence of numbers as its name, go in here and you should see, three files and a folder: corecomp, dotnetinstaller, IBSEW64. (the files may be different on 32-bit OS), now go into the folder which has another long random name.
In there amongst a lot of files (use search if you need to), you will find rom.zip. This is the rom we want to flash!
5. Copy the rom.zip file to the root of your SD Card
(i.e. if your on Windows, X:/ [where X is the letter of your Sensation's SD Card])
6. Rename the rom.zip you just put on your SD Card, to PG58IMG.zip (ensure you do not rename it to PG58IMG.zip.zip or it wont work!)
7. Find the "HTC Android ROM Update Utility" Window, and hit Cancel.
THIS IS YOUR LAST OPPORTUNITY TO BACKUP DATA, ALL EXISTING DATA, CONTACTS, MESSAGES SETTINGS, APPS, ETC, WILL BE DELETED AFTER THE NEXT STEP.
MAKE SURE THE BATTERY INDICATOR IN THE NOTIFICATION AREA SHOWS GREEN, NOT ORANGE OR RED, BEFORE CONTINUING.
Flash RUU (rom.zip)
1. EITHER:
1a. Shut down your phone, then take out your battery and put it back in.
OR:
1b. Make sure fastboot is disabled in settings and shut down your phone (This can be done via Settings > Power> Untick "FAST BOOT" at the bottom.)
2. Keep hold of the volume down button and switch your phone on.
3. When it asks "Do you want to start the update", press Volume Up to accept (this can take a while and its normal for the system part to appear to go in a loop several times)
5. Press Power Off to reboot to first time setup.
6. Your phone is now debranded!
7. Remove PG58IMG.zip from your memory card
Source - forum.xda-developers.com/showthread.php?t=1193033
The only issue I have now is I can do find or dl the
http://81.89.105.12/~bin4ry/hboot/PG58IMG.zip file
Where can I get this or could you send me a link
majordj said:
I've looked every I'm running insert coin ics rom for the HTC sensation. The charger and the usb data slot is snapped i can charge but cant flash from the comp. Or read data from the phone.
I need to unroot from the microsd card back to stock ics in uk orange is this poss?? As i need my warranty back please help
I've found this post -
METHOD 2 - ENG HBOOT
Now the method I found to debrand (rather than messing about with CIDs), is using an ENG HBOOT, this is only temporary as the ROM we flash later on overwrites it.
Grab the file below (thanks to Bin4ry), and put it in the root of your SD Card. (i.e. if your on Windows, X:/ [where X is the letter of your Sensation's SD Card])
Quoteriginally Posted by Bin4ry
ENG Hboot:
[thanks Rahan95 for dumping ]
http://81.89.105.12/~bin4ry/hboot/PG58IMG.zip
Flash ENG HBOOT
1. EITHER:
1a. Shut down your phone, then take out your battery and put it back in.
OR:
1b. Make sure fastboot is disabled in settings and shut down your phone (This can be done via Settings > Power> Untick "FAST BOOT" at the bottom.)
2. Keep hold of the volume down button and switch your phone on.
3. When it asks "Do you want to start the update", press Volume Up to accept
5. Press Power Off to reboot back to normal homescreen
6. Remove PG58IMG.zip from your memory card
Download an RUU
1. You now need to pick the RUU you wish to flash, a good source is this thread:
http://forum.xda-developers.com/show....php?t=1074559
To debrand my Vodafone Sensation, I chose "RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.90 0 7.00U_10.51.9007.27_M3_release_198179_signed"
2. Once you have downloaded the RUU you would like to flash, run it (it can take a while to load), and stop when you get the welcome screen, which has a picture of a Sensation on the left and a red caution notice on the right.
3. Move this window out of the way (it forces itself into foreground), then open up windows explorer and go to:
C:\Users\[username]\AppData\Local\Temp
4. Then sort by Date Modified. Find the newest folder with a long random sequence of numbers as its name, go in here and you should see, three files and a folder: corecomp, dotnetinstaller, IBSEW64. (the files may be different on 32-bit OS), now go into the folder which has another long random name.
In there amongst a lot of files (use search if you need to), you will find rom.zip. This is the rom we want to flash!
5. Copy the rom.zip file to the root of your SD Card
(i.e. if your on Windows, X:/ [where X is the letter of your Sensation's SD Card])
6. Rename the rom.zip you just put on your SD Card, to PG58IMG.zip (ensure you do not rename it to PG58IMG.zip.zip or it wont work!)
7. Find the "HTC Android ROM Update Utility" Window, and hit Cancel.
THIS IS YOUR LAST OPPORTUNITY TO BACKUP DATA, ALL EXISTING DATA, CONTACTS, MESSAGES SETTINGS, APPS, ETC, WILL BE DELETED AFTER THE NEXT STEP.
MAKE SURE THE BATTERY INDICATOR IN THE NOTIFICATION AREA SHOWS GREEN, NOT ORANGE OR RED, BEFORE CONTINUING.
Flash RUU (rom.zip)
1. EITHER:
1a. Shut down your phone, then take out your battery and put it back in.
OR:
1b. Make sure fastboot is disabled in settings and shut down your phone (This can be done via Settings > Power> Untick "FAST BOOT" at the bottom.)
2. Keep hold of the volume down button and switch your phone on.
3. When it asks "Do you want to start the update", press Volume Up to accept (this can take a while and its normal for the system part to appear to go in a loop several times)
5. Press Power Off to reboot to first time setup.
6. Your phone is now debranded!
7. Remove PG58IMG.zip from your memory card
Source - forum.xda-developers.com/showthread.php?t=1193033
The only issue I have now is I can do find or dl the
http://81.89.105.12/~bin4ry/hboot/PG58IMG.zip file
Where can I get this or could you send me a link
Click to expand...
Click to collapse
The only solution I know to revert to stock is in step 5 THIS guide , but it requires a connection with the PC. The guide you find isn't for your problem, if I understand well. Have a read here also to understand why you can't revert to stock without PC connection. sorry I can't help more
P.S If you want to turn it back for repairs don't worry too much, they usually never check if you are rooted. Just install a custom ROM that looks like stock and change your boot image to the Orange one
Well that's the best idea I think what rom ics looks the most like stock.
majordj said:
Well that's the best idea I think what rom ics looks the most like stock.
Click to expand...
Click to collapse
There is a thread with stock 3.33 based ROM in the dev section, just search for it
Get here a stock 3.33 ROM
You'll be unrooted, just flash this ROM from recovery.
Now I don't know about your mobile company if it has a boot logo or smth.
Make sure you are SuperCID

[GUIDE][ROOT] How to Root the CAT s60 ... ... and more !!!

EDIT 2019: rooting with TWRP from 038 read at the bottom of this post
HOW TO.... Stock, Update, custom recovery and root your s60 !!!!
Disclaimer: if you brick your phone, it's your fault, i have tested this way of rooting my s60 now for a several times and it works 100%
SO READ TWICE, CHECK TWICE, BEFORE YOU CLICK ONCE !!!!! i will not take any responsibility !!!
!!! ONCE AGAIN, READ THE WHOLE GUIDE BEFORE YOU START !!!
OK, now we start:
Thanks to everybody who contributed and made the root possible, here in this thread (Cesarq, OpenMinded, Tuschi, BetonJohn, etc.......) the software in the link further down, is the collected data, freely available in the net and linked in the original Thread several times, i have only bundled one package and wrote this, hopefully usefull guide.
in principle do as follows: (I will only explain once how to sideload or load via recovery, afterwards i will only state what kind and what file)
Prerequisites
- switch phone OFF
- download my collection of the essential s60 files : Here is my collection
EDIT 2019: - grap the 035 update here from the Thread: Thanks to tusch00101
i did not find the 038 update as a single zip file to download. if somebody could provide it ?
(there are ALL files included to flash stock, update to .035, flash twrp recovery and root.)
(this is for Win7 x86, you have to check if it works for other versions yourself, sy..)
- install USB drivers
(for recovery and adb !!! There are two different USB drivers needed)
- install "minimal ADB and fastboot"
- copy the two updates (update032.zip & update033.zip) into the folder, where you have installed "minimal ADB and fastboot" (makes live easier later)
- install QPST (the version of QPST is the one from Androidmtk and should be virusfree.)
(The version of QFIL in my collection is the one without reboot, so you have to reset/reboot your phone manually (resetbutton below hatchdoor on your phone) whenever stated in this guide.)
- format micro SD card in fat32 ! and copy SuperSU.zip onto it. Then insert microSD card into your phone.
- switch phone ON
- enable Developer Options, by going into the settings menu and go to "About Device". tip/touch/tap 7x the -build number- field. A message will appear: "You're now developer" (something like this)
- enable USB-debugging. Go again to settings, then "Developer Options" and enable USB-debugging.(flick the switch)
- connect a WORKING USB cable to your phone (Not to your PC atm !!!)
- dial *#06# to see the iMEI('s) of either one or both simslots. dial #02# to check what firmware version you are on
(just for your info: It looks like the "S" in the firmware version (LTE_X.....) indicates, that SingleSim only is activated, while the "D" stands for DualSim activated. my s60 had an "S"... )
(In my phone the second Sim slot (under the microSD card slot), was blocked with a small piece of, simcard shaped, black plastic. With the help of some tweezers the scrap
plastic was gone easily. Anyway --- BE CAREFULL --- when removing it.)
If you are allready on an LTE_D... Firmware version 033 or above (atm only confirmed up to 035) and you want to root with custom recovery, you only need to follow the last step in this guide ("getting twrp and Root") everybody else, continue reading...
getting twrp (for saving your old firmware only)
- power off phone.
- start minimal adb on your PC
- start QFIL (part of QPST) on your PC
- press VOL+ & VOL- simultanousely and connect phone with PC (it will vibrate once, top right LED starts blinking red, screen stays black) (- DOWNLOAD MODE -)
(just in case: to leave Download mode, disconnect phone from PC, press and hold power button for apprx. 15 seconds)
- as soon as you connect your phone to the PC, QFIL should show the Phone/port in the topline allready
(if not, either try to manually select the port, or you probably still have a problem with the USB drivers or the USB cable !)
- QFIL - tick "Flat Build" (top left)
- QFIL - select Programmer, "browse" to the saved location of "update-twrp-recovery-nobootpatch" and select the "prog_emmc.blablabla...mbn" file and doubleclick
- QFIL - "load XML" ,select rawprogramm, doubleclick, select patch0, doubleclick
- QFIL - click on "download"
- if everything was OK up till now, it should start download - BE PATIENT- and read the status window on QFIL, when it shows "finish download"....
- disconnect phone from PC
- press and hold simultanousely POWER and VOL+ (- RECOVERY MODE -) AND...
- ... use a small tool to push the reset button on the phone under the hatch, while still pressing Power and Vol+ !
- the phone should now be in twrp recovery. If so, do a full backup now to your (allready inserted and fat32 formatted) microSD card!!!
when done
- Power off your phone !
flashing stock 31.02
- enter download mode again (Vol+ & Vol-, connect phone to PC.......)
- this time in QFIL, browse in programmer path to "s60_stockFW_31.02" and select the programmer from there
- load XML's (the ones that belong to Stock31.02)
- start download... this will take a while !!!! BE PATIENT !!!!
- when QFIL status window shows finish download, push the reset button on the phone and let it reboot.
(it is normal, that the phone should restart itself 2, maximum 3 times during the first startup, but sometimes it ends up in a bootloop (Cat Logo, reboot, CAT logo, reboot, etc, etc, .......))
(The bootloop mainly happens, if you clear, in twrp recovery, the whole OS, or if you came from another firmware version (LTE_S... -> LTE_D... i.e., but that's no issue either...).
- if it ends up in a bootloop, no worries, just continue ! Believe me, i did this process now several times !
you are back on stock 31.02 !
- Power off your phone again
Updating to 032
- bring up minimal ADB sideload on your PC (start it, if not allready done in previous step (getting twrp)).
- press and hold POWER and VOL+ button on your phone
- when in stock recovery select (with Volume keys) "adb sideload" and click the Powerbutton
- connect your phone to the PC
- on PC, type into the black ADB Terminal window "adb sideload update032.zip" and hit enter
- if correct USB drivers are installed, phone will start downloading the update now.
- when complete, select clear cache, and clear data then reboot your phone.
(again, same as in the step (flashing stock), if bootloop, no worries, just continue, if it boots up, let it boot up and then..)
you're on 032 now
- Power off the phone again
Updating to 033
- do the same steps as described under "Updating to 032" only difference, type in adb window " adb sideload update033.zip"
EDIT2019: - do the same steps for 035 and 038
(After updating to 038, your phone should boot up normally by now. NO MORE BOOTLOOP !)
getting twrp and Root
- this is the same step as above "getting twrp" only difference, this time, no backup needed and...
- when in twrp-recovery, select "install" browse to your micro SD-card, and...
- install SuperSU.zip from SDcard.
- once more, clear cache and data and reboot.
The phone should boot up now, you should be on FW 033, with custom recovery and root !!!
That's all !!!
Oh, one last thing, whoever is having an s60, where only one simslot is working, this guide unlocks the second Simslot as well !!!
Also the problem, some people had, following the other guides (incorrectly) ! (me included) ! , by not using the right QFIL (the one without reboot), in the old Thread, resulting in a
not working WIFI is no issue anymore
EDIT 2019 !!!
Getting TWRP with stock 038 thanks to: CDMCCDMC for the addition !
https://forum.xda-developers.com/showpost.php?p=77978181&postcount=135
thanks for the awesome guide. works perfectly, but i will say every time I plugged my phone in it recognized it as a new device and had to reinstall drivers.... the first few times i did it i thought QFIL froze so i unplugged to reset, this caused an install failure that could not be rectified. I fixed this by uninstalling and reinstalling the drivers from step one and being more patient.
Dear adtbm,
the firmware updates (both) are extracted... became signature failure.
Please update your very useful package... thx
best regards
yanardag
Please i cant use my phone it hangs in a bootloop i need the update.zip 32 and 33
Yanardag said:
Please i cant use my phone it hangs in a bootloop i need the update.zip 32 and 33
Click to expand...
Click to collapse
Thanks for letting me know !
You can get the files from OpenMinded link here
You only need the two update files.
Untill i have updated my package.
EDIT: Package is updated now !
After flash 32 it is starting and i see the wizzard.
But after flashing 33 and rooting i have no wifi.
İ flashed 31.02 then update 32 and after this i update it ota
To 33 and last to 35 and everything is working root (supersu) (dont use magix)is working with 35 very well. Everything ok (xposed, gravity and so on) thx
Yanardag said:
After flash 32 it is starting and i see the wizzard.
But after flashing 33 and rooting i have no wifi.
İ flashed 31.02 then update 32 and after this i update it ota
To 33 and last to 35 and everything is working root (supersu) (dont use magix)is working with 35 very well. Everything ok (xposed, gravity and so on) thx
Click to expand...
Click to collapse
If you don't have Wifi after going to 033, you didn't followed the part of "getting twrp" correctly.
"...... - if everything was OK up till now, it should start download - BE PATIENT- and read the status window on QFIL, when it shows "finish download"....
- disconnect phone from PC
- press and hold simultanousely POWER and VOL+ (- RECOVERY MODE -) AND...
- ... use a small tool to push the reset button on the phone under the hatch, while still pressing Power and Vol+ !
- the phone should now be in twrp recovery. ....."
If you let the phone reboot after flashing the recovery, it will overwrite the boot and your wifi is gone !
But nice to hear, that everything is OK now. Do you have problems with 035 ? some people report, that they having issues with the display camera on 035 ...
Sorry for this silly question, but i´ve seen that in other models once you install twrp then you can flash super su, why here you have to downgrade to 0.31 first?
Thank you in advance.
javizap said:
Sorry for this silly question, but i´ve seen that in other models once you install twrp then you can flash super su, why here you have to downgrade to 0.31 first?
Thank you in advance.
Click to expand...
Click to collapse
Hi,
not sure, if you have read the complete guide, or if you have read through the 28 pages of the original Thread.
I think, it could be possible, (but i did not tested it) to flash the recovery via QFIL directly and then install SuperSU, without going back to 031. But since there are models of the s60 out, where only one Simslot is available (Please read my guide), to get the second slot activated you have to flash an LTE_D... firmware and, thanks to Cesarq, we (only) have atm his 031 firmware available, which is luckywise an LTE_D. firmware !
Like i mentioned in this guide allready, i did not found out the way how to root the s60 (the credit goes to Cesarq) and i also did not find out, how to update to 033 (this credit goes to OpenMinded), i have only collected the software & tools, bundled it and wrote this guide, with the available information written throughout the 28 pages of the original Thread.
So please feel free and test it and write us your result !
ok, just did my s60 last night, everything seemed to go just as described. i just checked and it seems it took the update and the dual sim activation. it didnt take root tho. i tried root checker and titanium and both say no root access. maybe i did the final step wrong? i tried it again with no success. am i supposed to be loading the nobootpatch recovery in qfil as the last step and then install su? thats how i attempted it. any help would be greatly appreciated. thanks in advance!
adtbm said:
If you don't have Wifi after going to 033, you didn't followed the part of "getting twrp" correctly.
"...... - if everything was OK up till now, it should start download - BE PATIENT- and read the status window on QFIL, when it shows "finish download"....
- disconnect phone from PC
- press and hold simultanousely POWER and VOL+ (- RECOVERY MODE -) AND...
- ... use a small tool to push the reset button on the phone under the hatch, while still pressing Power and Vol+ !
- the phone should now be in twrp recovery. ....."
If you let the phone reboot after flashing the recovery, it will overwrite the boot and your wifi is gone !
But nice to hear, that everything is OK now. Do you have problems with 035 ? some people report, that they having issues with the display camera on 035 ...
Click to expand...
Click to collapse
Nope everything is well. 35 runs without any bugs. For me is importend that xposed is running and that does.
yesca213 said:
am i supposed to be loading the nobootpatch recovery in qfil as the last step and then install su? thats how i attempted it. any help would be greatly appreciated. thanks in advance!
Click to expand...
Click to collapse
I asume, you have SuperSU copied onto your microSC card ?!
When you have finished flashing the nobootpatch recovery (QFIL shows finish download), you have to disconnect the phone from the PC, push Vol+ and Power and Reset (under the hatch) at the same time.
Otherwise Bootloader gets overwritten, your Wifi is gone, no custom recovery and no root.
If you are not using the version of QFIL from my package, you probably have a version that automatically reboots when download is finished and you're screwed !!!
If you did it correctly your phone should boot into twrp custom recovery and you should be able to install SuperSU from SD.
adtbm said:
I asume, you have SuperSU copied onto your microSC card ?!
When you have finished flashing the nobootpatch recovery (QFIL shows finish download), you have to disconnect the phone from the PC, push Vol+ and Power and Reset (under the hatch) at the same time.
Otherwise Bootloader gets overwritten, your Wifi is gone, no custom recovery and no root.
If you are not using the version of QFIL from my package, you probably have a version that automatically reboots when download is finished and you're screwed !!!
If you did it correctly your phone should boot into twrp custom recovery and you should be able to install SuperSU from SD.
Click to expand...
Click to collapse
Yes I did have it copied and installed it. I went back and did it again and hit wipe dalvic cache instead of going back in the recovery menu and wiping cache and data. Up and running 33 rooted, everything seems good so far! Thanks [emoji2]
Sent from my S60 using Tapatalk
adtbm said:
Hi,
not sure, if you have read the complete guide, or if you have read through the 28 pages of the original Thread.
I think, it could be possible, (but i did not tested it) to flash the recovery via QFIL directly and then install SuperSU, without going back to 031. But since there are models of the s60 out, where only one Simslot is available (Please read my guide), to get the second slot activated you have to flash an LTE_D... firmware and, thanks to Cesarq, we (only) have atm his 031 firmware available, which is luckywise an LTE_D. firmware !
Like i mentioned in this guide allready, i did not found out the way how to root the s60 (the credit goes to Cesarq) and i also did not find out, how to update to 033 (this credit goes to OpenMinded), i have only collected the software & tools, bundled it and wrote this guide, with the available information written throughout the 28 pages of the original Thread.
So please feel free and test it and write us your result !
Click to expand...
Click to collapse
I took your advice and rooted without downgrading firmware. My CAT is double SIM from factory and on 0.35 OTA.
I followed your guide but jumped from backup with twrp to install supersu, following all the steps from there.
Until now everything working fine with root.
One more time I can say that people on XDA is the best!
Regards
Dear friends,
How can i uninstall google assistant apk?
When i delete it the phone not restart and ended in a bootloop.
When i deactivate it the same bootloop.
very very good
Hello to this wonderful group. I did the rooting and it worked wonders, I was very disappointed with my Cat s60, for not being able to use the second sim and for the poor quality of the camera. After the root it became dualsim and the camera improved a lot. in addition to everything that means to be root. I am very grateful to ADTBM and to all those who made this possible. thanks thanks. regards
Yanardag said:
Dear friends,
How can i uninstall google assistant apk?
When i delete it the phone not restart and ended in a bootloop.
When i deactivate it the same bootloop.
Click to expand...
Click to collapse
Hi Yanardag,
i have the same problem. Unfortunatley Android IS Google . I really don't know how to disable it. Did you try to freeze it with Titanium ?
That's the only thing i could think of. I am annoyed by that Google stuff as well (especially the google assistant....)
This is one of the reasons, why i had to redo my s60 a several times.
So if anybody here finds a way to disable Google assistant, pleasse let us know !!!
@varonv: Nice to hear and thanks for the feedback !
Hi,
I am on 027 now. No OTA update available. Can I try this guide?
Thanks
freeze it with Titanium
adtbm said:
Hi Yanardag,
i have the same problem. Unfortunatley Android IS Google . I really don't know how to disable it. Did you try to freeze it with Titanium ?
That's the only thing i could think of. I am annoyed by that Google stuff as well (especially the google assistant....)
This is one of the reasons, why i had to redo my s60 a several times.
So if anybody here finds a way to disable Google assistant, pleasse let us know !!!
@varonv: Nice to hear and thanks for the feedback !
Click to expand...
Click to collapse
I froze it with Titanium: no problems whatsoever.
This Guide works on win 10 also. .. But ending in Win 10 Test mode

Categories

Resources