Database Info

[Q] Unroot g2

can someone help me out please? i rooted my g2 today and about 2 hours later dropped it flat on its face. the lcd broke, i cant see anything on the phone just vibrates when i turn it on.. is there some way using the sdk on the computer to unroot the phone so i can send it for an insurance replacement?

If its anything like the desire you can apply a RUU update.exe that flashes the phone rom, hboot, radio and recovery i.e. stock. However if yours is branded i.e. has your carriers software all over it, you'll need to find the corresponding RUU for that carrier. Also if its branded you'll probably (desire does) need to make a goldcard if you were to apply an unbranded RUU.

richardpearce123 said:
If its anything like the desire you can apply a RUU update.exe that flashes the phone rom, hboot, radio and recovery i.e. stock. However if yours is branded i.e. has your carriers software all over it, you'll need to find the corresponding RUU for that carrier. Also if its branded you'll probably (desire does) need to make a goldcard if you were to apply an unbranded RUU.
Click to expand...
Click to collapse
EDIT: didn't realise the G2 was T-Mobiles phone (if Im not mistaken and check me on this is the HTC Hero)... erm heres a link to a load of G2 roms, radios etc http://forum.xda-developers.com/showthread.php?p=4525584
do some researching into tutorials to make sure your doing the right thing. Also to research is whether your phone is GSM or CDMA as you will also have to flash the right RUU for that too.
When you rooted did you only root the rom or also patch a modded recovery too? If its the rom I suppose you could apply just the rom update, however if you applied a recovery you'll have to flash that with a stock one too.
Sorry its a bit confusing...

[Q] Root for Chacha on Telus: RUU 1.24.661.2

I loved my ChaCha so much I bought a second Black version from Canada's mobile network Telus. Of course it must be tweeked to get the most benefit, so I went to HTCDev to unlock the bootloader. When I run the RUU it tells me that I don't have the latest version. The Telus RUU on HTCDev is 1.24.661.1, but I already have 1.24.661.2 installed. I am lost as to what to do next. I've looked through the forums to find a similar situation but am unlucky.
What I am trying to do is make it so I can get data using my AT&T SIM (voice works, but not data), and run Didije's Custom Stripped Rom.
I guess what I am asking is ...
1. Is there a way to roll my RUU version back?
2. Does anyone have the Telus WWE RUU version 1.24.661.1, executable (.exe)?
3. Is there a way to get root with my current setup.
4. Any workarounds come to mind?
Any help will be appreciated. Thanks everyone.

maxwellsk said:
I loved my ChaCha so much I bought a second Black version from Canada's mobile network Telus. Of course it must be tweeked to get the most benefit, so I went to HTCDev to unlock the bootloader. When I run the RUU it tells me that I don't have the latest version. The Telus RUU on HTCDev is 1.24.661.1, but I already have 1.24.661.2 installed. I am lost as to what to do next. I've looked through the forums to find a similar situation but am unlucky.
What I am trying to do is make it so I can get data using my AT&T SIM (voice works, but not data), and run Didije's Custom Stripped Rom.
I guess what I am asking is ...
1. Is there a way to roll my RUU version back?
2. Does anyone have the Telus WWE RUU version 1.24.661.1, executable (.exe)?
3. Is there a way to get root with my current setup.
4. Any workarounds come to mind?
Any help will be appreciated. Thanks everyone.
Click to expand...
Click to collapse
I ended up finding a thread that explains how to work this. Simply put, just go to the next step. At the HTCDev site, you do not have to install the Updated RUU. Just scroll to the bottom and click, "Next Step."

maxwellsk said:
I ended up finding a thread that explains how to work this. Simply put, just go to the next step. At the HTCDev site, you do not have to install the Updated RUU. Just scroll to the bottom and click, "Next Step."
Click to expand...
Click to collapse
Thank you! I reported this to HTC back in August, but they said just keep checking back. I didnt notice that there is now a notice on the RUU page saying "If your RUU is newer than the one listed below, skip this step and go to the next step"
Had given up hope for rooting this device - 4 apps and i am already getting "no memory" messages

[Q] Is there stock recovery for a Rogers S One with RUU 1.84?

I have a rooted S One that seems to have lost its root access and signal after OTA update from Bell - the phone was bought on eBay as an "unlocked sealed" item, which wasn't the case. I want to restore the phone to stock and SIM unlock it for use with Telus, but there's no 1.84 RUU for Rogers available. I just want to confirm I can't restore the phone to stock without the 1.84 RUU. Or, if there's an alternative to get it working again, what that alternative might be and where to start. Thanks for any help.

tykidd66 said:
I have a rooted S One that seems to have lost its root access and signal after OTA update from Bell - the phone was bought on eBay as an "unlocked sealed" item, which wasn't the case. I want to restore the phone to stock and SIM unlock it for use with Telus, but there's no 1.84 RUU for Rogers available. I just want to confirm I can't restore the phone to stock without the 1.84 RUU. Or, if there's an alternative to get it working again, what that alternative might be and where to start. Thanks for any help.
Click to expand...
Click to collapse
Post is a bit confusing. You talk about Bell, Rogers, and Telus all at once. Also, if you got an OTA update from Bell, you will only be able to execute an RUU that has an hboot version equal to or higher than your current one.
If you are looking for a more recent RUU than the ones posted on http://forum.xda-developers.com/showthread.php?t=1543588
then I suggest you send a private message to Football, the user who started that post. He helped me find newer Bell Mobility RUUs (which have since been posted to the thread).
Your other option is to do a bootloader downgrade (see the dev post on this, its a bit complicated), and then you can flash other radios from http://forum.xda-developers.com/showthread.php?t=1998270
If you dont want to downgrade your bootloader, you can always flash to a CM10 base (AOSP type) ROM, such as PAC Man, or Jelly Bam, etc. Then you can flash radios without having to downgrade.
Again, though this is all assuming that your true problem is with you baseband radio and now switching carriers has made your reception poor...
Also remember you will have to relock your bootloader before you execute an RUU, otherwise it wont take (that and a correct bootloader version)
AKToronto

Thanks for the info. The phone is a sim-unlocked Fido unit. It was running on Bell before the OTA update.
Here are the specs:
Android version: 4.0.3
HTC Sense version: 4.0
Software number: 1.84.631.9
HTC SDK API level: 4.11
HTC Extension version: HTCExtension_403_1_GA_4
Build number: 1.84.631.9 CL64348 release-keys
Is the "build number" the RUU? I'll try Football, but do I need the Rogers (Fido) RUU?
Thanks.

you can not execute an rogers ruu on a bell phone, the cid wont match
there is an app on play who will display you the cid and the original network; like that you'll know exactly what phone do you have in hand
you just have to unlockit after and you will be able to useit in whatever network you want

Thanks. Ran CID getter and says it's ROGER001. So I've confirmed that I need a Rogers file. And I would like to unlock it, but from what I've read I cannot restore back to Rogers 1.70 because the unit has been updated to 1.84. I have read that if I can find a 1.84 Rogers file, I can use that to restore the unit. This is the next thing I need to confirm. I appreciate your help.

I think that is almost correct. You can change the CID to the Rogers one using the same technique as posted in the super Cid thread in the development section. Normally though you can't flash an older ruu as the hboot version can't be older. But You may also want to try posting a message in the bootloader downgrade thread that is stickied to n the development section. I think if you downgrade your bootloader and also do a minor hex edit to a partition you can flash an older RUU. I have downgraded my bootloader but haven't tried flashing an older ruu so I can't say for sure.
Sent from my HTC One S using xda premium

Thanks again. So I can assume the CID is already Rogers, yes? I don't want to change it. My hope is that I can use the All in One Toolkit (one of the sticky posts) to bring the phone back to stock and then SIM unlock it for use with Telus. If I run the Toolkit, and use cbetso's instructions from the "How to Return to Stock" post (after adding the stock recovery to the folder). If I locate the Rogers 1.84 RUU, can I run it without downgrading?

don't assume, your cid is rogers ROGER001, so there is absolutely no way your phone could download and execute an update from bell.
so I can not understand what has bell to do in this.
if you just want to use it on telus network, you just have to unlock it, you don't even need root for this. and the phone will work just fine.
the root is needed when you want to change ROM, radio, debloat and others.
one of the others will be tweaking the build.prop file to achieve maximum capacities of your 3g/4g desired network

Thanks - it's a difficult story to tell, really. It was a Rogers unit, SIM unlocked to work with Bell. It was on Bell's network for two months, and an OTA update caused major radio and reception problems. It will not keep a network signal anymore. I have tried other SIMs in the unit and it will not recognize them, nor start up with the "Enter Unlock Code" screen to SIM unlock it. It's my understanding that I need to return it to stock by finding the Rogers RUU file that matches the software version on the unit, which is 1.84. This is my very limited understanding of the issue, but it's what I've been able to figure out.

if it was a rogers device, and you did not change the CID, you get the ROGER001 cid with the app, your phone is still a rogers device
doesn't matter in which networks was used, for the two months before you get it, and by you after
as long the cid stays ROGER001, your phone will remain a rogers device, unlocked to be used in different networks.
so there is absolutely no way an OTA update, from bell or telus could be the source of your problems, because your phone will not download or execute an ota update from other networks
same for rogers ota update, as long the phone was unlocked, will not execute OTA updates, even the updates will be downloaded on the phone
your connection problem came from other reasons;
however it you want to return the phone to rogers stock, the key number is HBOOT version;
you can execute any RUU with HBOOT version higher or equal with your present version on the phone
if somehow you're on a very high version and you can not find the appropriate RUU, we can always downgrade RUU, check development section for tutorial
it's not very simple, but as long you're ok and you understand the steps, go for it, it is doable.
if you have root, you might try different radios before all above, or maybe a custom rom; just an ideea; as long the phone is not soft bricked or physically damaged, there is no reason a custom rom will not work

Thanks for the information. There seems to be other problems with the unit, including it won't delete all data after hard reset, it won't recognize other networks when other SIMs are put in, it has been upgraded past the 1.70 stock Rogers RUU. I wish I could get it figured out or I may have to sell it as is. Appreciate your help.

factory reset in fastboot didn't work?
means you're on some custom rom with non stock recovery?
have you tried to flash a stock recovery? any of them, whatever you'll find around here; there are no much difference in term of facilities between them;
then you should be able to restore phone to factory defaults
try find somewhere All in one kitt one S v1.0; there is stock recovery in it, and flashing is easy
in v1.1 there is no more stock recovery

donwload ruu or open up ruu..when it first starts go into your windows manager and in the link section delete what you have in that section like c:/program files and replace it with %temp% and it will find two encrypted folders with a big letter/digit name and they will show you what time they were opened . open them up and find rom.zip copy it to your desktop and then extract it somewhere safe .. in the folders in rom.zip you will see recovery_signed.img rename it recovery.img and flash it via hasoons tool kit provided in the development section..just in case you ever run into this again

Thanks. Can I flash a stock recovery in the All in One Toolkit without having the proper RUU version I need? Will this allow me to factory reset the phone, and the radio issue is another unrelated problem? The unit is supposed to be SIM unlocked, but when I put another carrier's SIM in, I still have no radio and I do not see the screen that says "unrecognized SIM" with an "enter unlock code" option.

tykidd66 said:
Thanks. Can I flash a stock recovery in the All in One Toolkit without having the proper RUU version I need? Will this allow me to factory reset the phone, and the radio issue is another unrelated problem? The unit is supposed to be SIM unlocked, but when I put another carrier's SIM in, I still have no radio and I do not see the screen that says "unrecognized SIM" with an "enter unlock code" option.
Click to expand...
Click to collapse
Not sure about your radio issue, that would require testing out different radios. You can do that on a higher hboot by trying AOSP ROMS and using the Radio flasher in the dev forums.
As for flashing stock recovery you can also just use the following link: http://loadbalancing.modaco.com/down...ery_signed.img
The stock recovery doesnt really change from RUU to RUU. You dont need a particular recovery to use a particular RUU, as far as I know.

Thanks - you wanna take another look at that link? It didn't seem to be anything. Or do I need to change the extension?

tykidd66 said:
Thanks - you wanna take another look at that link? It didn't seem to be anything. Or do I need to change the extension?
Click to expand...
Click to collapse
http://loadbalancing.modaco.com/download.php?file=ville_recovery_signed.img
Try that. Sorry about the other link

I maybe miss it, but you never said what is the exact status of the phone right now;
it is booting? it is working on some network? at least partially like voice only? what ROM are you on? what HBOOT?

Hi there - thanks for getting back to me and asking. The phone seems to be booting normally and always has been. It is not able to recognize any new SIM card. It's a Rogers unit, and when I add my Telus SIM it does not go to the "Unrecognized SIM" screen, it actually registers the TELUS network for a moment, then the radio gives no signal.
How can I check the ROM, 'cause I have no idea. Is the HBOOT in these specs?
Android version: 4.0.3
HTC Sense version: 4.0
Software number: 1.84.631.9
HTC SDK API level: 4.11
HTC Extension version: HTCExtension_403_1_GA_4
Build number: 1.84.631.9 CL64348 release-keys
Thanks again.

for the Hboot version you have to reboot in fastboot
for recovery reboot into recovery
for the ROM version, once booted normaly you have to go into about phone > software
are you sure you have the right settings for Telus APN? for some reasons, the phone will not registered to network, if apn setting are wrong;
at least for me, which I'm opposite to you as I have a telus phone and using it in fido network, if I dont have Fido APN setted up, the phone does not register to network

Applying RUUs on Unlocked 1.14/2.22 AT&T One X

Before anyone tries to flame me, I've read all of the recent ICS and JB rom threads, as well as most of the generic question threads. I've unlocked, rooted, and flashed several roms before settling on CleanROM so I am not a complete noob. The master q&a thread doesn't cover RUUs much, and people aren't that interested in applying non rootable RUUs, so info on going back to stock on a newer or even older RUU doesn't seem to be widely available. My biggest concern is bricking my phone or losing major functionality, as some people using asian based roms seem to be having reboot and/or wifi issues.
1. Applying a different carriers S4 JB RUU is perfectly safe as long as I relock the boot loader, even with Super-CID.
I've seen conflicting reports of issues with RUUs when you have Super-CID, even with the original shipping RUU and a relocked boot loader. Can someone confirm that using RUUs is safe as long as the boot loader is relocked? What if it isn't relocked? Just an error or a bricked phone?
2. Once you unlock your phone on 1.14, you are stuck with that radio forever unless you apply an RUU or switch to Cyanogenmod.
3. Assuming RUUs are safe, applying a different carriers' RUU on my AT&T One X won't hurt anything. There may be apn issues, but otherwise everything should work (especially the camera and wifi).
Again, I understand that without root, I may not be able to add apns anyway. AT&T at least seems to have blocked the ability on their stock rom; not sure if other carriers do the same.
I really appreciate the help. I have searched, so this is more of a confirmation than anything else. Just trying to avoid bricking my phone and learn something new at the same time.
Tim
Sent from my HTC One X using xda premium

tlazarus said:
Before anyone tries to flame me, I've read all of the recent ICS and JB rom threads, as well as most of the generic question threads. I've unlocked, rooted, and flashed several roms before settling on CleanROM so I am not a complete noob. The master q&a thread doesn't cover RUUs much, and people aren't that interested in applying non rootable RUUs, so info on going back to stock on a newer or even older RUU doesn't seem to be widely available. My biggest concern is bricking my phone or losing major functionality, as some people using asian based roms seem to be having reboot and/or wifi issues.
1. Applying a different carriers S4 JB RUU is perfectly safe as long as I relock the boot loader, even with Super-CID.
I've seen conflicting reports of issues with RUUs when you have Super-CID, even with the original shipping RUU and a relocked boot loader. Can someone confirm that using RUUs is safe as long as the boot loader is relocked? What if it isn't relocked? Just an error or a bricked phone?
2. Once you unlock your phone on 1.14, you are stuck with that radio forever unless you apply an RUU or switch to Cyanogenmod.
3. Assuming RUUs are safe, applying a different carriers' RUU on my AT&T One X won't hurt anything. There may be apn issues, but otherwise everything should work (especially the camera and wifi).
Again, I understand that without root, I may not be able to add apns anyway. AT&T at least seems to have blocked the ability on their stock rom; not sure if other carriers do the same.
I really appreciate the help. I have searched, so this is more of a confirmation than anything else. Just trying to avoid bricking my phone and learn something new at the same time.
Tim
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Im on hboot 1.14, firmware 2.20 att. Unlocked , rooted , flashed Rom. However , I had some problem then decided go back stock.
1. Downloaded ruu2.20 for att
2. Relock bootloader
3. Boot phone to bootloader mode then run ruu. Now my phone is stock
P/s :
- you don't need to root your phone to add apn . I can add T-Mobile apn just fine after I flashed ruu.
- ruu.exe can't run if you bootloader is unlocked.
Sent from my HTC One X using XDA Premium HD app

tritran18518 said:
Im on hboot 1.14, firmware 2.20 att. Unlocked , rooted , flashed Rom. However , I had some problem then decided go back stock.
1. Downloaded ruu2.20 for att
2. Relock bootloader
3. Boot phone to bootloader mode then run ruu. Now my phone is stock
P/s : you don't need to root your phone to add apn .
Sent from my HTC One X using XDA Premium HD app
Click to expand...
Click to collapse
Thanks - that answers my RUU questions as far as going back to stock using RUUs. I assume the same applies to other carrier's RUUs, i.e. Telus/Asia. What about using an OTA on a phone with Super-CID?

redpoint73 said:
A factory reset or running the RUU will not change the CID.
SuperCID doesn't prevent you from getting the AT&T OTA (although root and unlocked bootloader will).
Click to expand...
Click to collapse
^^

jiggamanjb said:
^^
Click to expand...
Click to collapse
Okay, I think that answers my questions. No problems with using a RUU, AT&T or otherwise, as long as it is for the XL. Stuck on my current radio unless I use a RUU. And I need to relock my bootloader before applying a RUU, although I can unlock it after. I will lose root, however. Thanks!

Flashing OTA

I have a Telus evita phone on 4.1.1. I was wondering if I could flash the German O2 or T-Mobile OTA to receive 4.2.2. My phone is SuperCID and S-OFF. Phone is currently stock because I ran a RUU then updated to 4.1.1. Will I lose my data if I flash the OTA?
Thanks

dx99 said:
I have a Telus evita phone on 4.1.1. I was wondering if I could flash the German O2 or T-Mobile OTA to receive 4.2.2. My phone is SuperCID and S-OFF. Phone is currently stock because I ran a RUU then updated to 4.1.1. Will I lose my data if I flash the OTA?
Thanks
Click to expand...
Click to collapse
I would just flash TWRP back onto the phone, then flash Turge's stock T-Mobile Sense 5 ROM posted in Development. Install the 2.15 firmware if you experience signal drops or random reboots.
My typical recommendation is to stay away from official OTAs if you are modded.

I just don't want to flash anything on my phone that's not official. That's why I'm asking, I want to keep my phone stock and just get an official update not a rom from another source.

Your phone is already far from stock, with SuperCID and S-off. You're already down the rabbit hole. And putting an OTA for another version is also not going to be "stock" or "official" for your phone.
The stock ROM is just from the OTA dump, completely unmodified (not even rooted, in fact). Its what is on my phone, and is running great.
Running the OTA might be risky. OTA does not necessarily have all the components. For instance, the T-Mobile 5.05 OTA does not have all the hboot modules. It assumes you are coming for the most recent T-Mobile RUU or OTA. So depending on what is currently on your phone, you can brick.
In theory, I think what you are proposing will work if you RUU to the most recent T-Mobile Germany RUU, than T-Mobile Germany Sense 5 OTA.
But again, you're making it more complicated than need be. What is exactly the issue with "unofficial" ROMs? If you don't trust the devs here, you would not have done SuperCID and s-off to begin with.

It's not that I don't trust the devs I just want to use official carrier updates. I know my phone isn't stock what I meant is using stock/original files from carriers. So even though my phone is from Telus and I used a RUU from them to get back to stock firmware I can flash a T-Mobile RUU over top of it then use their OTA afterwards?

dx99 said:
So even though my phone is from Telus and I used a RUU from them to get back to stock firmware I can flash a T-Mobile RUU over top of it then use their OTA afterwards?
Click to expand...
Click to collapse
Yes, the only thing stopping the RUU from running would be the carrier ID check and hboot version check (might be some other checks). But since you have s-off, all security checks are bypassed by definition.

Alright, would there be any issues with the fact that I'm on 4.1.1 and going backwards in firmware first? Since most RUU are 4.0.

dx99 said:
Alright, would there be any issues with the fact that I'm on 4.1.1 and going backwards in firmware first? Since most RUU are 4.0.
Click to expand...
Click to collapse
Now that you mention it, it looks like you would have to run the most recent RUU from T-Mobile Germany (3.17.111.1) then run two OTAs (3.17.111.2, and then finally 5.08.111.2). Run them out of sequence, and you risk a brick.
RUUs can be installed out of sequence, but there isn't one for 5.08.
I retract my former idea to RUU then OTA. I can't personally recommend such action upon further consideration. Its more complicated than I originally thought. I go back to my former statement, in that you are making this much more complicated than it should be. You are actually creating a higher risk of bricking your phone due to some imagined fear of "unofficial software".

redpoint73 said:
Now that you mention it, it looks like you would have to run the most recent RUU from T-Mobile Germany (3.17.111.1) then run two OTAs (3.17.111.2, and then finally 5.08.111.2). Run them out of sequence, and you risk a brick.
RUUs can be installed out of sequence, but there isn't one for 5.08.
I retract my former idea to RUU then OTA. I can't personally recommend such action upon further consideration. Its more complicated than I originally thought. I go back to my former statement, in that you are making this much more complicated than it should be. You are actually creating a higher risk of bricking your phone due to some imagined fear of "unofficial software".
Click to expand...
Click to collapse
So then its not possible to use the T-Mobile RUU and OTA on my Telus phone?

dx99 said:
So then its not possible to use the T-Mobile RUU and OTA on my Telus phone?
Click to expand...
Click to collapse
I think its possible, but its needlessly complicated and possibly risky. If you do it wrong, you might brick.
I don't personally recommend it, and its my personal opinion that you don't have a particularly valid reason for going that route when simpler methods exist. So if you proceed, its at your own judgement and you take all responsibility if something goes wrong.

If it does manage to work so you think there might be compatability issues with the play store or region specific things?