Hi! Let me introduce a tiny app, available in English in the moment.
This program shows a small info window during incoming/outgoing call. It contents country, region, city (or mobile operator) and LOCAL TIME in that place (worldwide)!
See latest comments and screenshots on cyrket (I'm not allowed to insert links)
Detailed popup customization is supported
The phone base I collected and created (many errors there were fixed by hands) was only available in Russian, but today I released English base, made with help of Google Translate
I know, such translation is buggy (but still much better I expected). I hope you'll help me and other users to have a complete and accurate information about calls - just email me right from the program menu about any issues or comment here.
World time also changes (for example, Russia lost two time zones this March) and if you find any error - post here or email me
You don't need to download phone base. You may download its latest version from the app, but if you want to do it manually, unpack the zip to the sdcard's root
How accurate does it get? I don't get many international calls, but might be useful to know where a landline call from within the UK is coming from?
What happens with mobile calls from with the UK? I assume no detail at all then?
it covers both landline and mobile network all over the world, where it is possible to distinguish between numbers by area codes. just try =) there are more than 25000 records in the base
Sent from my T-Mobile G1 using the XDA mobile application powered by Tapatalk
Hi. How do you set this up?
I have placed my Country Code (00351) and set GMT to +1 and when I call from my desk to my phone, it says it's a call from India ...
afaik, country code cant starts with zeros. Please, provide full number (you may hide last four digits) and right country for you I'll check and write settings here
Erm, I think techinally it either starts with two zeros, or a + but you're asking for a single number?
For example, UK is either 0044 or +44
wow. That is new for me. I know that with one leading zero start local calls. And you say two zeros replace + . hmmm. try left country code blank, that may help, I think. and if not, please, type whole number without four last digits
Not sure if this is already obvious but as there seems some uncertainty. AIUI the correct way to state an international number is to prefix it with +. To make a call, the plus sign is replaced with the two (or sometimes three or four) digit international access code which depends on the country one is placing the call from. For Europe this is 00, for the States, 011 etc.
I'm in Portugal, and my number is +35193233xxxx. I have tried leaving it blank, but by default leaves a 7... tried with 00351, with 351 and when calls are incoming still stays it's from India.
I'll wait for further clarification and if nothing happens I'll un-install it.
By the way, it doesn't let me use the +.
Thanks
okay, and what was the incoming number? what it was looking like on the call screen? country code preset replaces leading zero or eight digit. so it doesn't interfere number detection in you case I think
Sent from my T-Mobile G1 using the XDA mobile application powered by Tapatalk
The incoming number was looking like this: 91811xxx
It's a mobile number from Vodafone.
Just got a call from Germany, and it identified the Country and city allright. Seems that it doesn't work for calls inside Portugal only...
i see eight digits and no country info in this number. if there are seven digits program says local call and do not provide any information (because there is no trusted information) in eight or more digits it tries to detect country code. it replaces leading 8 or 0 with country code from the settings - for example local russian mobile calls may look like 8916xxxyyzz - we replace 8 with country code 7 and identify it with MTS - the program even say region or city based on x or xx or xxx in the example above. but in your situation I have no idea how to detect that the call is local and country code needs to be put before the number =( I've never heard that income mobile number may be in the format you wrote - it should start with plus sign and country code or 8 or zero (Ukraine, Moldova). I'm whirled
Sent from my T-Mobile G1 using the XDA mobile application powered by Tapatalk
Any chance you can convert the database into something human-readable? I'll be glad to cross reference a bunch of Southern California area codes and prefixes so that you can get some more accurate data there.
Also, a program similar to yours got hit with a cease & desist a few months back by some patent trolls because they supposedly hold a patent on this very thing. You're in Russia though so I dunno if their reach extends to you. Just thought I'd give you an FYI.
XStylus said:
Any chance you can convert the database into something human-readable? I'll be glad to cross reference a bunch of Southern California area codes and prefixes so that you can get some more accurate data there.
Also, a program similar to yours got hit with a cease & desist a few months back by some patent trolls because they supposedly hold a patent on this very thing. You're in Russia though so I dunno if their reach extends to you. Just thought I'd give you an FYI.
Click to expand...
Click to collapse
please, email me a t r a n t . s g @ g m a i l . c o m (or from the program menu) to discuss db elements, thanks in advance.
and yeah... i've read that stuff and even contacted the author...
But, my program is better now, I think =) And I will hit 10000 downloads, I hope. That will be enough, I think, for my efforts and hand-made db =))
Uninstallation
How do i uninstall de database, can't find it but i takes 3 mb of internal memory. Anyone has a suggestion!!
castor.troy said:
How do i uninstall de database, can't find it but i takes 3 mb of internal memory. Anyone has a suggestion!!
Click to expand...
Click to collapse
Just remove the DB app. There is no way to leave DB app and remove the DB, android OS restriction (can't modify signed apk on the device)
uninstallation
So when i uninstall WorldCallPlaceAndTime.apk than de database will be removed from my internal memeory?
Castor
castor.troy said:
So when i uninstall WorldCallPlaceAndTime.apk than de database will be removed from my internal memeory?
Castor
Click to expand...
Click to collapse
Sure, man! Do it right now!
Related
Hello every one,
Using different cabs and advices from this forum, I managed to get using the native internet calling feature of my device.
I'm able to make calls, but something is still bothering me with the dialling process: I have to re-enter the entire phone number that I want to call before every call I place since my sip provider (Voipbuster) requires that the number starts with (00) plus the (international area code) while all my numbers in contact are stored like (+) plus (international area code).
Can any one helps me out with an Ipdialplan.xml model, that fixes this issue?
Of course, it should works no matter the total amount of digits the contact number includes. 11, 12 etc.
Thanks in advance.
Here you go
http://msdn2.microsoft.com/en-us/library/aa921921.aspx
ipdialplan
You can also have a look on my post, with an example :
http://forum.xda-developers.com/showpost.php?p=1540809&postcount=3
Hello all
I've been reading this forum for some months now and i like the windows'es and informations i've found here on my Hermes device
But now i have some questions on using the often integrated tool field test.
I've found out that with the IMSI-catcher (german wikipedia as one of the sources), that are more and more often used semi-legal by the police(here in europe there are a lot of 'GA-90' devices sold to the police and other institutions), it is possible to listen to phone calls(man in the middle attack), by just 'emulating' the strongest phone-cell in the area, to which the device connects instead of connecting to the provider's cell.
I also read that it would be possible to find out if there was an imsi-catcher device active in the area near you or not. The only thing needed is a special monitor software (field test?) that observes the MNC(Mobile Network Codes) behavior(appearently you need 2 handy's from the same provider with the monitoring software running).
But they didn't explain exactly on which behavior you should pay attention.
Since I could use 2 windows mobile devices to test this out, I am searching for more detailled information on this subject, and the first place that came in my mind was xda-developers
I allready did search this forum for the subject imsi catcher, and the only thing I've found is this.
google result
so one person who tries to change hies imei number, and another one who doesn't seem to know exactly what an imsi catcher can do.
Is here anyone who knows more?
I know that where I live, there are pple who make abuse with IMSI-catchers(catching calls without the permission from a judge or similar, or even one time someone listening to his girlfriends phone calls to see if she's cheating(and she did and that was the reason he left her))And yes this one was a young policeman who told that to his friends and even was proud of it.
I also dislike the fact that the handy, instead of the encrypted one with the provider's cell, has an non encrypted connection to the imsi catcher(if not there would be no possibility for a listening man in the middle attack).
I also read about the cellphones from http://www.cryptophone.de/
Appearently they do allways have encrypted conversations even through an Imsi-catcher. But if that would be true, the other side will need the same handy to decrypt it again. Because it has to encrypt, the allready encrypted data traffic with the provider's cell, if not it can't allow any protection against IMSI -Catcher devices. I also ask myself if, depending on where u want to use it, the 2nd encryption could produce a to huge phone traffic that could result p.ex. in a robot voice...
Anyone who could light me up?
Or is there any software able of reencrypting the encrypted transfer on windows mobile devices?technically it should be possible(2nd phone dialer installed so you choose the normal one for normal calls and 2nd one for calls with pple who also have this software installed on their phones)perhaps not with an 256 bit encryption but perhaps with a 128 or 64 bit encryption...
BTW, if there would be anyone able to programm such a hot piece of software for windows mobile devices I wouldn't have any problem to donate him with paypal, and i suppose other pple would do the sameAnd no I don't wanna replace that by Voip or skype via HTC...
Thanks in advance
Patrick
So no one who knows more about this?
I would be very happy if i could at least test if they're really used that often as they say they are(where i live).
And since i could try it in different major 'cities' over here, i suppose catching a imsi catcher soon or later
I'm quite curios if all the pple, telling that there is a lot of abuse with these machines, are right, or if that's all nonsens...
It would be nice if a warning icon could be integrated into Windows Mobile or the dialer to indicate that a call is not being encrypted. Read the Wikipedia entry for IMSI-catcher for more info. I'm guessing CDMA is largely unaffected since the hole seems to rely on the UMTS spec's backward-compatibility with GSM.
I'd also like to note that Skype is the way to go for true endpoint to endpoint call encryption. You know, if you're a gangster or something and need to brush off the popos. It would be interesting to investigate whether the WM6 integrated VOIP stack requires authentication/encryption.
I live in a country where it is obligatory to dial long distance company prefix for calling other areas and countries, thus I can´t have all numbers stored in an international standard notation. Like I can´t store a UK number like +44 1273-701648, I have to store it like 00XX441273701648 (where XX is a two digit long distance company code, like 23 or 41 ). Same with in-country numbers - I can´t store them neither in international nor in regular local form, for example - I live in area code 011, so to store a phone number in area code (081) 3421-3266, I have to store it as 0XX8134213266 (where XX is a two digit long distance company code, like 23 or 41 ). At the same time, I have to store numbers in my own area without any prefix at all. So far so good, as long as I don´t leave my area or country.
If I will go to another area, like (081) - I will have to cut off all 0XX81 prefixes since I will be in roaming locally there. At the same time I will have to add 0XX11 to all numbers from my native area code. Worse - if I will go to an area from which I have no numbers stored let´s say 019, I will have to keep ALL locally stored codes, like 0XX81... BUT also add 0XX11 to all phones from my native 011 zone.
When roaming abroad it is somwhat easier - I´ll have to cut off 0XX and add country code +55 to ALL numbers. But also I´ll have add area code 11 to all phone numbers from my native 011 zone.
When I was using WM6.5, Magicall by Mobiion was able to do it for me. Is there anything similar under Android?
Did you check android settings?
There is an option for automatic prefixes, atleast on my i9000.
It might be possible to make a widget that gives quick access to enable/disable the prefixes.
Dark3n said:
Did you check android settings?
There is an option for automatic prefixes, atleast on my i9000.
It might be possible to make a widget that gives quick access to enable/disable the prefixes.
Click to expand...
Click to collapse
Nothing like this on my X10 mini pro. At least visibly, but I´ll try to look into it. Thank you!
Thank you everyone for feedback. I was advised to try out Prefixer and it is exactly what I needed.
This is one of the phone settings in my DS.
Can anyone explain exactly what it means ?
I know the basics of roamiing but this one is beyond me.
A google search on that phrase reveals nothing ;-(
- Thanks !
It adds the international dial code to numbers in your contacts list when you're roaming .
Eg , if your phone is set up in Ireland , it adds +353 to the beginning of any dialed numbers when roaming .
It adds +44 to UK based phones when roaming.
It can be useful if you don't have your numbers saved with the internatiomal dial code .
Click on "home dialing" to see more options.
Hope this helps.
Sent from my HTC Desire S using XDA App
That's very useful to know for when I go on holiday.
Actually, I have set OUTLOOK to include +44 on all my numbers as "UK", so I probably won;t need to use the function - But at least I now now ;-)
- Steve
Found this thread created recently on another website. I thought you guys might be interested in reading the content.
Github page: https://github.com/julKali/nokia8-evenwell
Here are some of the most interesting comments:
mattlondon 2 days ago [-]
So I have spent some initial time looking at this.
com.evenwell.autoregistration.Caivs has some worrying looking stuff.
There is a website here with the username and password in cleartext in the jars: https://www.c2dms.com Nothing visible/doable once logged in from what I could see.
It also appears to be collecting fine-grained location data, e.g. this is the output from logcat (I have obfuscated my own GPS coords here, but they are 6 digits of accuracy)
Code:
2019-03-30 19:38:21.406 15139-15159/? D/[CAIVS] LocationFinder: LocationUpdated: 3.location:Location[gps 51.xxxxxx,-0.xxxxxx hAcc=39 et=+1d19h59m28s923ms alt=102.50201416015625 vel=3.09 bear=14.3 vAcc=24 sAcc=3 bAcc=10 {Bundle[mParcelledData.dataSize=96]}]
2019-03-30 19:38:21.406 15139-15159/? D/[CAIVS] LocationFinder: updateLocation: gps accuracy:38.592003
2019-03-30 19:38:21.406 15139-15159/? D/[CAIVS] LocationFinder: updateLocation: is in accuracy :1000
com.evenwell.autoregistration.Utils.RegisterManager seems to be doing some scheduled checks and doing something with this collected data in the first 24 hours, then phased at 15 and 90 days. It is not clear what is happening having only done an initial scan over this.
It does look like they are doing some checking to see if the device is a Nokia device and selectively doing or not doing location-based stuff based on that, e.g. from com.evenwell.autoregistration.Utils.GetInfo
Code:
2019-03-30 20:09:25.108 16558-16577/? D/[CAIVS] GetInfo: getCellLocation: in black list
Further investigation probably warranted. This looks a bit suspect and might only send data on specific days (and would explain why I did not notice anything outbound over my 4 day period of checking before).
Click to expand...
Click to collapse
I found this in English: https://web.archive.org/web/20081027134825/http://www.cseed....
Quote: "CAIVS notifies our system when the handset is purchased. Data includes the date, time, and location that a SIM card is first inserted into the handset, the inserted SIM card's telecom operator, the handset's operating system, the handset model and phone number, and even the time when it is first turned on. "
WTF.
It is not clear at the moment if there is a blacklist on the MCC code going on in com.evenwell.autoregistration.Util.XMLHelper that reads from /product/etc/AutoRegConfig.xml is this line:
Code:
<NOKIA>
<REJECTMCCLIST>232,206,284,219,280,230,238,248,244,208,262,202,216,274,510,272,222,247,295,228,246,270,278,204,242,260,268,226,231,293,655,214,240,228,234,235,520</REJECTMCCLIST>
</NOKIA>
These are - I think - the Mobile Country Codes (https://en.wikipedia.org/wiki/Mobile_country_code) it gets from the cellsite. This list is basically the EU + South Africa, Thailand and Indonesia. Don't know what things are like in SA, Thailand or Indonesia but in the EU this sort of thing would not be acceptable. Looks also like there is a hard-coded short-circuit in getLocation() in com.evenwell.autoregistration.Util.GetInfo to always return no location lat-longs which appears to trigger another shortcut in RegisterManager that shortcuts out to the "Caivs not in registration phase" log output which returns without triggering the sendToServer() calls on other code paths.
I am not convinced that this will never send location back, but looks like it might have been updated with to prevent phoning home in those countries in the MCC list (and maybe by hard-coded shortcuts the actual code). This would meet with what was said with there recent phoning home response from Nokia - i.e. (https://translate.google.com/translate?u=https://nrkbeta.no/...)
Click to expand...
Click to collapse
As foobarbazetc noted, the listed packages have been specifically developed for Nokia (HMD). And although many only actually send telemetry on Nokia phones that have been sold in China, there is still quite a lot of data at stake that can be used to track the device when combined with data from other sources.
I wanted to share my findings to create the awareness that the mechanisms are there and it only takes a little misconfiguration (see https://arstechnica.com/gadgets/2019/03/hmd-admits-the-nokia...) and all this goes straight to the Chinese authorities.
Click to expand...
Click to collapse
full thread: https://news.ycombinator.com/item?id=19530670
This is why I feel like a custom rom for this phone is long overdue so we can use our phones free of concerning bloatware and privacy issues.