Database Info

WiFi internet issue on WM6

I`ve got a T-Mobile MDA with WM6 and I cannot access the internet through WiFi. The access point that I connect to is working cause I am able to access the net fine on my laptop. I made sure that my network cards are set to connecte to the internet. I even did a softreset after I made the changes.
My internet explorer just sits there on locating. I am not sure if its just my WiFi card configured incorrectly within WM6 or if its a reg setting that isn't set right.
If anyone had this issue before and got it fixed let me know or give me some direction to start.. thanks in advance for your help.

This is a fairly common problem. For me disabling the Wireless G option in the registry did the trick:
Registry: HKLM\COMM\TNETWLN1\PARMS
Key: dot11SupportedRateMaskG
Value: 1

so I diabled it, soft restet, verified that the reg change sticked, which it did. I tried to access the net again with no go.

me too
I have the exact same problem.

Not much discussion about this
I tried the G fix. Didn't work. Funny thing. It started when I installed MB. Downgrading DIDN'T fix it.

Try setting the the Network Card to connect to "The Internet" instead of "Work"

they are set to that..

That actually worked for me. (The Internet instead of work fix) I also made sure that all the boxes for "Server assigned IP address were checked. I could have sworn I tried that already. I wonder if it will stay "fixed". I'm due for a soft reset...seems to be working. I've been thinking all along it was some stupid setting.

EclipsedMotions said:
they are set to that..
Click to expand...
Click to collapse
check the change your dns to 4.2.2.1 and 4.2.2.2 this may fix your problem
R

Changing to Internet and setting the DNS doesn't seem to help. Funny thing is, GMail via Midlet Manager seems to work (maybe its doing GPRS?). But IE just spins at Locating...

wifi internet issue on wm6
although i have the older version of t-mobiles' mda (wm5), i had similar issues connecting to the net even it sees a lot of wireless aps. either i cannot hold a steady connection or cannot connect at all. the solution i had was changing the channel on my wireless ap and updating my mda's parameters for my local wireless security. now i can go to the web using my mda even with poor signal quality. It is possible that you have several wireless ap's at your location sharing the same channel. hopefully changing the channel solves your problem.

simple possible solution, but check the proxy settings? I know with cingular, many people had trouble browsing the internet due to the MediaNet proxy settings. they removed the proxy settings and everything was fine then.

There is a known issue with your rom your running...there has been a new release. check the MB thread and you will see a recent listing about a 6 and 4 mb page pool, the wifi has been fixed.
mfrazzz said:
Changing to Internet and setting the DNS doesn't seem to help. Funny thing is, GMail via Midlet Manager seems to work (maybe its doing GPRS?). But IE just spins at Locating...
Click to expand...
Click to collapse

I have the original MB edition and I do not have any wireless problems. I know he had to fix the re-released versions as the wifi did not work with them initially, but I was unaware of a wifi problem with the initial release.

WIFI problem don't even see networks
Hey everybody, still loving this phone and its diversity, but have flashed this little piece of hardware with the mb 4mb/6mb wm6 rom only to find that WIFI can't even be turned on!. And yes I've downed the fixed versions from a certain forum. When I turn on WIFI, It just gives the symbol in the top straight away. It just can't find the networks. I even manually added a network, it then tries to find it, but simply can't. WEIRD hey.
Is there a solution for this problem, cause I really, like the look and feel of the wm6 roms over the wm5 roms.
bye all and thanks in advance for the kind replies.

Did you try using WiFiFoFum at all to see if it can find networks? I have not had any issues with WiFi with the Most Beautiful edition whatsoever. Only thing I notice is that when the machine first turns on or right after a soft reset that I need to click the comm manager icon for wifi twice before wifi will turn on. Otherwise it finds and connects to networks perfect.

Problem with MIE
i have no problem to connect to my homenetwork with WIFI, but i cannot access the internet with the internet explorer. but it works perfect with the opera browser!

hmmm..
It's weird...
I never access the internet with the internet explorer even my wifi was connected successfully while I brushed wm6 rom.
A miracle has happened Today.
I install a WIFI Device for WM5, that one is simple Chinese language.
I tried to turn on the wifi but not work.
Then I uninstall it -> restar....
Then I tried one more time to turn on wifi, ok, it's work to connect but still can't open the web page.
I check the wireless lan, switch the power save mode to best performance.
Then....I can open web page????
Wow~~ I don't know it work cause the wifi device change something or just swtich to best performance.
Maybe you guys can try.
(Sorry to reading my poor English)

thomas.iseli said:
i have no problem to connect to my homenetwork with WIFI, but i cannot access the internet with the internet explorer. but it works perfect with the opera browser!
Click to expand...
Click to collapse
Same exact issue. Pocket IE doesn't work, Opera does. Did you figure it out or get it corrected yet?

oops, double-posted

Unstable radio on unlocked Treo 750

My Software Version - TREO750-2.23-RWE
Firmware Version - 1.54.00.00
GPRS / 3G connection not always launches itself. I have push email and i find myself having to go to "manage connections" and activate it manually...
Can anyone help, please?

Try again athena_unlock program (run from TREO 750).
This util is obtainable after use CheetahUnlocker and extracting to C or D:/TempChe
or flash again WM6 TREO750-2.23-RWE form miniSD nammed CHEEIMG.nbh

Thansk for your anwser.
I can't run it again because it keeps telling that i already ran the upgrade...

extract cheeimg_fw.nbh, place it in a folder with kaisercutomruu.exe (search forum for this), rename cheeimg_fw.nbh to ruu_signed.nbh, execute kaiser*.exe
I do not recommend upgrading to 1.54.30.x

Thanks for your answer. But, if yoy don't recommend this upgrade, perhaps i 'd better stay still.. Right?

btw, it happens frequently that my data connection doesn't start when some application (as the IE) requires it; but, after editing the connection (without changing anything at all) it just starts working... till the next time.
Thanks,

instead of editing the connection, do this instead.
start
settings
connections tab
connections
manage existing connections
on your isp click and hold the middle button or stylus and you will get an option that says "connect"

Well let's explore the issue at hand: You do not get an auto-connect to GPRS/3G. Can you explain the situation a bit more. Is there data outbound (e.g. internet browsing or mail synch) or do you expect data to connect when there is no data outbound? When you attempt outbound data traffic do you get an error or simply no attempt at all to connect to GPRS/3G?

The situation arrives when i try to access the internet (IE) or push synch my corporate email (with Onebridge).
Sometimes it works fine; but... suddenly it stops working (i mean, the data connection).

HTC Fuze Network Connection

Hello xda forum, i've got a big problem. I get to connect to my wireless very smoothly, but if i want to access a password-less wireless (there's one in my school) it just connects me, but it seems like i cannot use anything. Not skyfire nor youtube application works, even though it shows that it's connected. If i use "random ip assigned by server" function, it just doesn't connect. Is there any program that sets up the gateway of every wireless you try to connect to?
Sorry for my crappy english, i hope someone will get what i mean.

sorry for this re-up, nobody could help me?

try opening your internet explorer, many locations require just hitting accept of their user policy. ive run into this as well, but opening a browser like opera or internet explorer should put you into a splash page for you to accept the locations user policy agreement.

School wifi problem

Just got my Samsung Captivate about a month and I got my wifi connected to the school network, but when i open the broswer or any apps need internet i didnt get any connections? at the first week it works.. and when connecting to the school wifi it should be come out with the school login page,, then the internet will work.. however the wifi is connected doesnt matter how strong the wifi singal is.. it just cant load and cant bring me to the login page..
I really need help..
and the wifi works everywhere.. except my school...
btw my friends iphone 3gs works..

I am also at college and have had the same problem. the best reason I have found is the phone itself. half of our wifi is an older standard that does not work on the phone. it shows up as wep and i can not get it to recognize it as 802.1x . in my tinkering I have also messed up the wifi that was working.
long story short it probably won't work. I have spent a long time trying to get it to work with no luck
Sent from my SAMSUNG-SGH-I897 using XDA App

Hello to both of you,
I also attend a college with an 802.1x connection and the captivate supports most of these networks; however you will probably need to configure the network settings manually (usually retrievable on your schools IT site). If you dont mind digging up your settings I would love to check to see if I can configure your phone.

FYI, you might be having a problem similar to what's seen in this post.
http://androidforums.com/captivate-support-troubleshooting/142397-odd-netmask-issues-wifi.html

I definitely had this problem today. It appeared connected but no web pages would load. Going to have to investigate further. Why can't things just work

I know my school recently implemented some new security certificates that you must agree to before logging in, has anything like that changed for you? My wife's Aria is running 2.2 and can log into the school network, but my captivate cannot. It is frustrating I know.

Seems some colleges and universities are noticing issues with android devices letting the DHCP leases to expire but keeps using the IP address assigned instead of requesting a new one.
See the following links.
h t t p ://www . natecarlson . com/2010/08/27/android-att-captivates-wifi-networking-is-broken/
h t t p ://www . net . princeton . edu/android/android-stops-renewing-lease-keeps-using-IP-address-11236.html
I actually have similar issues with my Belkin wireless router at home. My laptops and other wireless devices have no problems connecting or re-connecting but the Captivate just refuses to re-connect after the connection was terminated. Even after resetting the router, the phone just keeps trying to use the same IP address for some reason.
The only way I could get it to reconnect is to either reboot the phone or to remove the AP entry which is a pain especially if you have wireless passwords.
Hopefully someone with better insight into how Eclair and Froyo handles WiFi can come up with some fix.

more solutions?

I believe the new 2.2 firmware solves this issue. I too am at College and my captivate FAILS to actually access the internet through wifi unless I statically assigned the IP.
I just updated to Froyo and it connected instantly. I'll have to do more testing to make sure, but I think Samsung finally fixed it.

captivate wifi issue at school
i just got Galaxy S (Captivate) and wi-fi is giving trouble.
when i tried at a university campus, it gives error and says can't open and try again later. it is like, i get connected to the network, IP and DNS and everything is generated. But when i open browser to open a website, instead of taking me to login page it gives the above error.
here is what i get when i try to open a website.
'web page not available'. the page might be temporarily down or it may have been moved permanently to new address.
here are some suggestions:
- check to make sure device has signal and data connection. (I made sure it is connected to wifi)
- reload page later. (i tried after 5 mins, same result)
- view cached copy from google. (doesn't work either)
i am not able to understand why is this happening. i tried restarting the phone after connecting to wifi but no luck. any pointers?

Sounds like they use a portal system which requires logon and doesn't play nice with the Captivate's browser. Unfortunately many such portal systems are written poorly and I've even seen some that only work with Internet Explorer.
You could try a different browser on the Captivate. Dolphin allows spoofing assorted User Agents, which might help.

Hey guys, I have the same problem connecting to m school's network login page. It would say connected but the website always says cant be found. But the good news is that I found a way to connect to it manually! What you need is your captivate and friends iphone 4 or 3gs. First have use your friends iphone to connect to the wifi and then go into wifi settings. You should see 2 DNS address, Ip address, netmask (subnet mask) and router address. Now jot those addresses down except the ip address. Go to settings->wireless and network->Wi-Fi settings->now tap the bottom left button under the samsung logo and click advanced. Now check use static ip. Do not enter anything for your ip address just yet (we will do this last). Now enter router address into gateway, subnet mask into netmask, DNS1 to DNS1 and DNS2 to DNS2. ok when you are done click back and tap the network you want to connect to. Once you are connected jot down your ip address by taping the network once more. now go back to where the static ip was and input the ip address you just jot down into the ip address underneath use static ip. Disconnect and reconnect to the desired network. You may have to do this a few times or reboot your phone. This has been working for me so far around different buildings but with the same school network connection. I hope this helps cheers!

sremick said:
Sounds like they use a portal system which requires logon and doesn't play nice with the Captivate's browser. Unfortunately many such portal systems are written poorly and I've even seen some that only work with Internet Explorer.
You could try a different browser on the Captivate. Dolphin allows spoofing assorted User Agents, which might help.
Click to expand...
Click to collapse
Yeah, my school uses the Bradford dissovable agent. Funny thing is, some connections work perfectly, others not at all. Technically none should work, and sometimes I feel that maybe I should tell them that sometimes somehow it is possible to bypass the whole agent thing- but why rock the boat just yet

Does it need a proxy to work? If so, this app is amazing.
http://forum.xda-developers.com/showthread.php?t=766569

I figured it out a month ago, and it is actually petty easy. But you really have to change ip address manually, usually just the last number.
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Eduroam

Hi all, this is my first post and sorry for my english
I have a big problem with my galaxy sl, i can't use wifi connection (eduroam) in my uni (http://venus.unive.it/wifi/index.php?cmd=eduroam_android Venice)
I have followed the istruction of my uni, but wifi don't work
I have read http://forum.xda-developers.com/showthread.php?t=1477743, i have tryed all versions but the connection don't work
I use miui rom v2.3.23 (http://forum.xda-developers.com/showthread.php?t=1538234) with default kernel.
Do u have a solutions???
thanks to all

Hey there!! I also have eduroam in my University and I have never been able to connect it. Sorry then!!

Same problem here (with eduroam and another similar wifi network in my university).
Actually I was able to connect, but it worked few times. Usually after a full wipe my phone connects flawlessly to wifi, but after that connection, another full wipe is needed.
In my case, it seems that the phone is unable to get a valid IP, because using a fake IP, gateway etc (in wifi settings press the menu button and then go in advanced) it will immediately enstablish a connection (no internet connection of course). I tried to put valid infos once (I had with me my laptop connected and I copied all the infos from it, I only changed the last number in the IP) and it worked. That's why I think is an IP problem, but maybe it was luck .
Maybe doing a sort of "wifi config reset" solves the problem (at least in my case), but it means that everytime I should reconfigure it... I simply gave up and I use my 3G connection .
I found this weird workaround time ago, but I never tried it. I think it worths a try.
===
EDIT:
Strange, you use a different config. I thought all Eduroam networks would have used the same config. Here mine's:
SSID: eduroam
Security: 802.1x Enterprise
EAP method: TLS
CA certificate: "Not specified"
Client certicate: the downloaded certificate

i will try ur config next week but, my friend can use edoroam with a acer liquid (2.2 foryo) with config written in university site.
IMO there are a bugs in the kernel of galaxy sl because a lot of android phone can connected to eduroam

Up

I tried again after I saw this thread and I now I'm quite sure that my problem is an IP problem. I played a little with airplane mode/static IP in a random way (as suggested in the link I posted) and finally I enstablished a connection.
Usually, right before the connection, my phone asks the credential password. And that's weird.
Anyway I discovered something interesting. In our /system/build.prop we have:
Code:
...
wifi.interface=eth0
...
wifi.interface=tiwlan0
but
Code:
getprop wifi.interface
gives as result tiwlan0 and that's ok, this is our wifi interface.
But after that I went to see some other config files and I found that in our /system/etc/dhcpcd we have
Code:
interface eth0
I think this should be
Code:
interface tiwlan0
(I found reference to eth0 in /system/etc/wifi/wifi.conf too, but I don't what this file is used for).
I wanted to see if changing eth0 with tiwlan0 in /system/etc/dhcpcd/dhcpcd.conf and removing wifi.interface=eth0 from build.prop would have helped, but I had no time and now I'm on holiday.
If your problem is similar to mine, try to do that change, it won't break anything, I already did that and wifi works (at home of course, where I've never had a problem).

I have also eduroam in my university and i am using eduroam fixer and it is working perfectly. İt is in google play and free you can use it
Sent from my GT-I9003 using Tapatalk

Try this app: Transparent Proxy. Input your wifi proxy and port.
It may work...

I also have eduroam in my university and I've managed to make it work.
You just need to enter eduroam config and set it like this (I have my phone in spanish, so the names could be a little messed up ):
Code:
EAP method: TTLS
Phase 2 authentication: PAP
Identity: [I]"your university mail"[/I]
Password: [I]"your university mail password"[/I]
And leave everything else blank. Hope it works for you guys!!