Okay, so here's my issue. I have a Mytouch (Tmobile branded) and I was following a guide on the internet for how to root it and install custom roms and somehow in the guide I downloaded and flashed the recovery image with recovery-RA-dream-v1.2.3.img instead of the freakin' mytouch specific recovery image. I have found the right one now but the recovery image is loaded and I don't know how to change it if I can't boot into my phone. I can get to the recovery partition and it can wipe my phone and restore default, etc. but it won't load any custom ROMs. How do I load the proper recovery image? Like from a terminal or something? My phone isn't bricked is it, at least hard bricked?
Well it looks like I might be able to do this from terminal, like flash the recovery partition with the correct one on the sd card. Any way of how to do this, or what I'd need to put in the terminal?
Heyyyyy, I figured it out! I just loaded a SAPPIMG.nbh image and I'm going to reload the recovery from there. Thanks though haha I like figuring it out for myself anyway. The symptoms of this issue before I noticed the build was wrong was it wouldn't get past the green HTC MyTouch screen, even after 30 mins. Hope this helps you all.
Okay so I'm back again, this time with the recovery image RA-sapphire-v1.6.2G and it's not loading cyanogen roms. I can boot into the recovery and all is well until I try to load a custom rom. I reboot and all it does is hang still on the Mytouch logo, and I waited over 2 hours so it's not me being impatient. When I flashed the accidentally wrong dream recovery image did I change the radio with it? What am I doing wrong?
I'm mildy retarded sometimes. I was trying to install the update.zip over nothing instead of the 1.6 base. It's working now. The guide I was using just sucked. Love it! Thanks guys for all your hard work!
Related
A bit stuck here. I have a MyTouch which I previously rooted using a goldcard and had installed a Hero ROM on it. This worked fine but performance was terrible, so I attempted to go back to a simple ROM I found on these forums.
After installing the new ROM, the phone booted up but froze on the splash screen. This has been the situation ever since:
Back+Power gets me fastboot. Can use fastboot to talk to device.
Any attempts to "fastboot boot" a recovery rom results in reboot to splash screen.
Any attempts to Home+Power to go to recovery rom after fastboot loading it results in splash screen.
While in fastboot, 'adb devices' returns nothing (is that normal?)
Since I can still get to fastboot I have hope that this can be fixed without sending it in, but everything I can think of to try just puts me back on the splash screen.
I've already had to pay for repairs once, would love not to do it again. Please help?
Yeah, you should be ok if you can fastboot. What's your current radio and spl? If you're coming from cursor is it possible that you still have a hero radio spl combo installed and therefore 32a recovery Roms won't work? Or if you've already reverted to a magic radio spl then are you sure you're using the magic recovery and not the old hero recovery?
I tried something similar. I couldn't boot to any new AmonRA recovery ROM, but I tried an older version (v1.3.2 I think) and finally it booted to that recovery ROM. After that I could flash SPL to xx.2010 and flash to a new ROM. After I got new SPL and ROM, I could boot to the newest AmonRA recovery ROM (v1.5.2), but for some reason I've never been able to flash the recovery ROM
im going to hazard a guess here and say this is due to having the hero rom normally requiring you to have ur sd card formatted into fat32 ext and swap! i imagine you have gone ahead and flashed a new rom without re-formatting these, as this will cause rom to BOOT LOOP, and secondly have you wiped data/factory reset before flashing new rom
redmdc said:
im going to hazard a guess here and say this is due to having the hero rom normally requiring you to have ur sd card formatted into fat32 ext and swap! i imagine you have gone ahead and flashed a new rom without re-formatting these, as this will cause rom to BOOT LOOP, and secondly have you wiped data/factory reset before flashing new rom
Click to expand...
Click to collapse
This sounds very likely that this is the problem ...
if you say what hardware you have so we can maybe help?
had the same issue
had to flash sappire.nbh
the run relentess rooter v1.2.3
then upgrade to latest version v1.5.2
good luck
try and not power into fastboot FIRST, instead, try booting into RECOVERY FIRST AND FLASHING A ROM FROM THERE (has to be on the SDCARD...) tell me how it goes ok?
I rooted my HTC Desire CDMA from USCC okay, flashed a Froyo ROM with USCC stuff, and everything was okay. I made a nandroid backup, flashed CyanogenMod 7 RC4 and it seem to work okay, except I was having trouble entering my password when checking voice mail. Anyway, I decided to go back to Froyo. I used ROM Manager to restore the backup and got into ClockworkMod. However, none of the options work. If I go down to recovery, I go to the next screen, but no matter which option I select I end up with a black screen and nothing happens! I can't restore my backup! If I just try to press power on, I end up with the blue CyanogenMod screen and the arrow just goes round and round. Nothing happens. Please, if anyone has any suggestions, it would be greatly appreciated.
I remember hearing that because CM7 is a Gingerbread mod, it must use ClockworkMod v3 and to go back to your Froyo backup you'll need to downgrade to Clockwork Recovery 2.x. I'm not sure if things has changed, though, this was what I read a month or two ago.
Are you by any chance able to fastboot?
Reflash your CWM (if you are using NAND version) or get it again on your SD (if your are using SD version).
The problem is I can't do anything in ClockworkMod (version 2.5). Every option I select gives me a blank screen! I made a nandroid backup before flashing CyanogenMod, but I have no way of getting to my backup if I can't use ClockworkMod. Also, if I try to boot the phone, i just get the CyanogenMod 7 startup screen with the arrow going round and round. It will still be there 30 minutes later. I have to do a battery pull to start over with anything.
I was able to boot my phone after wiping all user data. I would like to use my nandroid backup to return to the previous ROM, but clockworkmod doesn't seem to work. I tried reflashing it in ROM manager and it only downloads a second or so and isn't really doing anything. I'm wondering if clockworkmod is defective. Is there any other way to flash it again without using ROM Manager?
If you are able to fastboot, you could try to restore a nandroid by flashing three files (boot.img, system.img, data.img) from your nandroid backup using:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata data.img
Disclaimer: I've not actually tried this procedure before! I got this info from here
You could use a similar procedure to flash a new ClockworkMod since your recovery may be corrupted: fastboot flash recovery recovery-clockwork-3.0.0.5-vision.img
You can download the image from Koush's website, under HTC G2.
This happened to me yesterday trying out the Alpha Build for the Fascinate. I was getting a dev block error and datadata would not mount. I had to go back to stock on heimdall. I don't know if this helps for your phone, but maybe somone with more knowledge can tell you if this may be happing to you and what the fix is, if that's not a fix for you.
Long time listener, first time caller.
I have the latest hboot 1.45.0013, S-On, Unlocked with HTC Dev Tool.
I used the Hasoon2000 tool to install SU, CWM, and a recovery image. I then used the instructions in the thread (http://forum.xda-developers.com/showthread.php?t=1508556) to install ICS and obtain root installing pyr-o-ice sense 1.1.1 (http://forum.xda-developers.com/showthread.php?t=1469615) Everything worked, created nandroid backup and installed titanium.
Some buttons didn't work, so I looked for updates and found Virtuous ROMs. So, I used CWM to clear dalvic, flashed boot image of the Virtuous Inquisition then used CWM to install zip. Bootloop. ROM just hangs on black screen with white V for 15 to 20 minutes.
MT4GS thread stated that Primadonna and Inquisition were comparable, so I followed the same proceedure, flashed Primadonna boot image then installed ROM through CWM. This time there was tmobile splash screen, but the same system hang.
At this point I tried to restore a recovery, but CWM could not find one. Used Astro to delete all boot images from SD root, assuming this may be the problem, and flashed a Virtuous ROM again. Same problem.
Based on this thread, I thought it might be the kernal, and tried flashing the pyr-o-ice boot image that worked initially. (http://forum.xda-developers.com/archive/index.php/t-1628171.html). No dice. CWM could not install the ROM (error 1)
So, at this point, I used CWM factory reset and wipe all data. And of course that made things worse, because the SD card with recoveries was wiped. I used adb to push the recoveries from Hansoon's toolkit, but stock recovery was not available (red triangle screen hang) and cwm could not mount the SD card.
So, at this point I used CWM to format SD card (blank anyway), and at this point adb failed to recognize the decive and I could no longer fastboot into recovery or hboot through adb. (volume down + power stopped working with pyr-o-ice install)
if i remove the battery and hold power + volume while using an adb reboot hboot command i can get into hboot about every 10th attempt. adb doesn't recognize the device ("waiting on device", or adb devices yields a blank list); however the phone in hboot will transfer to usb fastboot when connected with a cable.
i looked at pushing a zip file through adb to the sd root, but that was ineffective (adb does have write access to the sd root, maybe because i am s-on?). i purchased a second sd card, and copied the recovery images from hansoons toolkit and rebooted into recovery. still went to tmobile splash, followed by V-screen bootloop.
i looked at placing a stock ruu on the sd and naming the file PG59IMG.zip, but because i'm S-on i can't flash radios, so that's out.
So, here we are. Iffy access to fastboot, 2 sd cards, a lot of determination, and a persistent bootloop.
Can someone, PLEASE help me?
Thanks!
AFAIK, you cannot flash the boot.img with CWM if you are S-ON, you *MUST* use Fastboot to flash that. So, before you messed it all up, if you had just extracted the boot.img from the ROM and flashed it using Fastboot, it likely would have worked just beautifully.
Try booting into recovery and doing a regular flash of the ROM, THEN a fastboot flash of the boot.img.
SOLVED!!
Thanks to the folks heading up the HTC Unbricking Project (http://forum.xda-developers.com/showthread.php?t=1627881) ESPECIALLY Dexter93!! who patiently unraveled this for me, and Blue6IX for the Restore to Stock instructions in the Developers Reference Guide (http://forum.xda-developers.com/showpost.php?p=17424340&postcount=24) I'm back to stock, and ready to try it all again!
Can someone send me an apk that automatically clicks the thanks button for selected developers at regular intervals?
Thanks again!
Solved???
Fuzi0719, thanks for your reply. I may have written this inappropriately, but what coded in the command prompt was "fastboot flash boot boot.img".
The ROM zip file was placed on the SD card, and I rebooted into recovery, and used CWM to install zip from SD. I'm new to this so I may have used the wrong term for installing the zip through CWM, the boot image file was always handled through the above command.
I'm back to "stock" at this point, but when I boot into the bootloader, the phone looks for PG59DIAG.zip and PG59DIAG.nbh before PG59IMG.zip.
It then asks if I want to install the update. (This is after I have already installed the "update", and the phone reset itself even with my old wallpaper.) When I got to the home screen there was a white circle in upper left corner of the status bar, with "check content" message. Each time the screen locked (default 30 seconds) unlocking it took me to the mytouch splash screen with the green circle and white background for about 10 seconds before resuming.
Each time I check to see if the phone registers requiring any updates. It doesn't. Two installs of the PG59IMG.zip. "recovery" eliminates the unlock splashscreen, and wiped any customizations. However, the phone will not manually boot into the bootloader; I have to use adb. Hboot reinstalls the PG59IMG.zip as an update every time.
If I accept it reboots within seconds like a fresh doubleshot. If I decline the "update" it reboots to the Tmobile MyTouch 4G Slide text splash screen, then moved to the green circle screen for a few minutes before I get to the homescreen.
Blue6IX was looking for help with these last month (http://forum.xda-developers.com/showthread.php?t=1580077), so maybe they are just extraction files that HTC sends with the OTA update that would prevent my phone from trying to install the "update" every time?
In any case, my question at this point is after coming from such an unstable point with my phone, is this what every relocked bootloader does? Or, is this a problem that means something else is still wrong with the system? Because taking it back to stock has not solved this.
Thanks.
Thanks for clarifying, you wouldn't believe the number of people who fail to follow that one simple step of fastboot flashing the boot.img, so that's why I stated that. So, now you have the phone relocked, and running a stock ROM (the 1.55?), but with CWM 5.0.2.7? Were you wanting to update to the 1.63 ROM? I'm unclear on what it is you want to do. For one thing, if you've already flashed the PG59IMG then I would delete it off the sd card so it doesn't keep trying to load it.
Yup.
It was just that simple.
Mainly I wanted to make sure that my phone was stable before I went back to unlock the bootloader, etc.
Went back to HTC, got a new token (just in case), and I'm creating a nandroid backup right now. Thanks.
I really appreciate it.
Hopefully the next time I get stuck, it's just as simple to fix, but far less embarrassing.
So I was cruising around the Nexus S forums and found a rom I liked after I unlocked and rooted my phone.
I flashed Paranoid Android and then flashed the Matr1x kernel. Thus putting me in a neverending bootloop.
No ability to go back to CWM so I can't restore. And I can't put it in download mode so no ODIN.
What the heck do I do?
Can anyone help?
BTW if this is actually called a soft brick I'm sorry my terminology might be off.
Also I did this because the last phone I did extensive flashing with was an HTC Inspire 4G and it was easy to flash stuff just clear everything and flash what you wanted no bootloops. Sadly this phone not so much.
Hmm... No recovery...I've been stuck in a bootloop but I had recovery!
Sorry for the useless post, I cant help you..
Are you able to get into bootloader?
Usually when a bootloop occurs you should still be able to go in recovery.
When you say "no ability to access CWM" do you mean ROM Manager? Or the recovery mode?
What happens when you try to access the recovery mode?
same issue like urs
http://forum.xda-developers.com/showthread.php?t=1775933
try clean install;
flash Rom-Wiper.zip
flash Dalvik-Wiper.zip
then;
factory reset,
Format the system, data, cache, boot & partitions of your device.
I mean no access to recovery. CWM is Clock Work Mod Recovery. I have no access to fastboot either. The only thing my phone can do is bootloop.
You have to be mistaken.
Press power and volume up to get into fastboot ( bootloader). Then pick recovery....
That rom or kernel will not erase recovery. If your phone is in a bootloop it is making it past the bootloader
So it appears it as if I was mistaken. I got into fastboot and booted into CWM I'm still confused as to what I did, but I think I corrupted the Kernel.
It was the weirdest thing though. I tried it at least a dozen times, then I tried to run down the battery and try it again afterwards, and it didn't work so I gave up. Then I tried it again about 5 minutes ago and it worked. I'm sorry I cause you guys so much confusion. I've been doing this for so long I guess I just didn't doubt I was doing it right.
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
kozaqu said:
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
Click to expand...
Click to collapse
That got me in the right direction and I can at least get back into recovery now. Thanks! :good:
Also in the same boat
mkhopper said:
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Click to expand...
Click to collapse
I'm also sort of in the same boat i had a custom rom installed and decided to go back to stock os and now i'm stuck at either the Nvidia Logo or the Fastboot menu there's nothing else it let's me do i'd take any advice at this point. I can use Fastboot commands and I've tried Flashing Twrp.img and also flashing all the stock os which goes through with no problems i reboot the device and it's just stuck at the Nvidia logo
Ps: how did you manage to get back into recovery
Hello.
I think i had the same Problem.
I Flashed a Custom Rom, MiniGapps and the tegra...Battery file and since then i had boot loop an the NVidia Logo.
The Problem was: i flashed the tegra-Battery.ZIP file!!!
I noticed that i have to unzip it and flash teh tegra-..battery.DTP file.
since then it booted up again.
the OpenGappMini was buggy. it worked with the Nano!
Hope this helps for you as well!
OMG you guys. I did the exact same damn thing. Flashed the ZIP instead of the DTP file. 100 million thanks to you. I'm going to give it a shot now.
It worked! I wonder how many other folks didn't realize it wasn't a zip to flash to dtb and bricked their devices.