Related
anybody has a working sys.txt for VGA resolution?
I tried several edits from the Diamond forum but they seem not to work properly... iGO starts (kinda start and is minimized in the tray) and sits there.
Waited for over 30 min ... no start.
Current sys.txt:
[folders]
app="%SDCARD%/IGO8"
[interface]
maxzoom2d=6000000
show_exit=1
resolution_dir="320_240"
vga=1
[rawdisplay]
;driver=gdi
class="portrait"
[smartzoom]
minangle=15
maxangle=75
[debug]
skip_eula=1
enable_roadshadow=1
cache=262144
reserve_memory=1835008
show_perfromance=0
disable_outlookpoi=1
tts_min_ready_wav=1
tts_getaway_time=100
tts_expected_engine_delay=1400
sound_q_length=200
[navigation]
sim_speed_factor=4
[map]
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000
I'm running a pretty recent version of iGo8 and let me tell ya... it was a nightmare to get working.
I was running the VGA version on my Dell Axim x51v, which you would think it would run the same on the Fuze as it would on the Axim, well it wouldn't.
I did lots of research and modifications to get the working result I did.
SYS TXT said:
[folders]
app="%SDCARD%/iGO8"
[interface]
skin="ui_igo8"
resolution_dir="240_320"
vga=1
width=240
height=320
maxzoom2d=6000000
show_exit=1
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[map]
2dheadup=1
[debug]
skip_eula=1
enable_roadshadow=1
[msnd]
msnd.start=0
[rawdisplay]
highres=0
screen_x=480
screen_y=640
[map]
2dheadup=1
[device]
sdcard_dsk_num=7
[gps]
port=6
baud=57600
set_messages=0
Click to expand...
Click to collapse
This displays full screen, has the GPS information already setup (but I think it needs to be changed to port 4), and supports the 3D landscape and 3D buildings. Try that and see what you got. One thing I noticed is that you have your resolution set to landscape, which will launch funky.
Here's mine and its working good for me:
Code:
[interface]
maxzoom2d=6000000
minzoom2d=40
show_exit=1
shutdown_time=0
vga=1
[map]
auto_nightmode=1
3d_max_tiltlevel=9000
2dheadup=1
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000
[folders]
app="%SDCARD%/iGO8"
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
skip_exit_numbers=0
always_say_road_names=1
announce_street_name=1
[device]
sdcard_dsk_num=7
[rawdisplay]
highres=1
driver="GDI"
autoconfig=1
[3d_config]
roadsign_lines_per_screen=24
[debug]
skip_eula=1
[route]
correctness=90
[msdn]
enabled=0
[sound]
queue_length=200
Any idea what this does from the OP?
[navigation]
sim_speed_factor=4
@Mindfrost
[rawdisplay]
highres=1
driver="GDI"
autoconfig=1
Click to expand...
Click to collapse
Interesting ... GDI didn't work for me ...
sim_speed_factor=4
Is for a higher speed if you want to race through the map. Tops out at 1800 mph
@player911
[device]
sdcard_dsk_num=7
Click to expand...
Click to collapse
Isn't this the entry for the DIAMOND internal storage card?
Surfed several threads and just download a cleaned data and branding zip.
BTW how bad is the lag??
@mindfrost82
Hey - U DA MAN - started instantly
hahahaha I'm in France (according to the start screen map) not in California (as I am right now) but I guess a GPS log will fix this problem!
tyguy said:
@mindfrost82
Hey - U DA MAN - started instantly
hahahaha I'm in France (according to the start screen map) not in California (as I am right now) but I guess a GPS log will fix this problem!
Click to expand...
Click to collapse
No problem
It took me some tweaking to get it working too.
I have some lag while driving, but its still usable, and I don't think its related to the software, I think its hardware/ROM/Radio related.
We'll see perhaps it's even related to TouchFlo3D running in the background though we should have enough juice and free mem.
Will report.
Thanks for your quick help
TY
question guys does iGo have US maps that you can use it with? I have emailed their support on their website and have not received a response are you guys in the US or elsewhere? thanks
wolfnumba1 said:
question guys does iGo have US maps that you can use it with? I have emailed their support on their website and have not received a response are you guys in the US or elsewhere? thanks
Click to expand...
Click to collapse
Yes it does.
player911 said:
Yes it does.
Click to expand...
Click to collapse
really? do u know where to get the USA verison by any chance? I have been looking for it everywhere
@wolfnumba1
I sent you at 10:02 am PST a PM so better pick it up!
Hey tyguy
I noticed something in your sys.txt file, I did the same too.... make the arrow smaller from 20000 to 10000, looks neater on the screen right? Well.... I changed it back to the original setting now it seems the lag is less, I think the reason is that when making it smaller it doesn't zoomin on the arrow to adjust the size difference thereby making it look as if you have lag when you don't actually have it!
Try it out and let me know if you agree.
Regards
@maw
Not sure what you are referring to. My current sys text looks like...
Help?!?
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
minzoom2d=40
show_exit=1
shutdown_time=0
vga=1
[map]
auto_nightmode=1
3d_max_tiltlevel=9000
2dheadup=1
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
skip_exit_numbers=0
always_say_road_names=1
announce_street_name=1
[device]
sdcard_dsk_num=7
[rawdisplay]
highres=1
driver="GDI"
autoconfig=1
[3d_config]
roadsign_lines_per_screen=24
[debug]
skip_eula=1
[route]
correctness=90
[msdn]
enabled=0
[sound]
queue_length=200
[navigation]
sim_speed_factor=4
I meant this line in your sys.txt:
3dcarsizemul=10000
Default is 20000
I changed it back to default and it seemed to be more accurate now.
Thanks, changed, we'll see ...
Gotta go to LA downtown later anyway so that will be a good test.
i hope you need to buy
wolfnumba1 said:
really? do u know where to get the USA verison by any chance? I have been looking for it everywhere
Click to expand...
Click to collapse
please remember warez are not allowed here.
i think you are right with changing the arrow size. in 2d mode my igo8 is dead on target. in 3d it is lagging so i tried it at 30000 and ill see how that works
liamhere said:
please remember warez are not allowed here.
Click to expand...
Click to collapse
+1 thus I PM'd him
maw said:
I meant this line in your sys.txt:
3dcarsizemul=10000
Default is 20000
I changed it back to default and it seemed to be more accurate now.
Click to expand...
Click to collapse
I had it set to 10000 on my Tilt this morning when I tested it and the location was still dead on compared to my Fuze.
I have a little problem with igo , it enters igo but when it's trying to load the main screen it exits the program i am using version 8.3.2.7z. Please help
i have the same problem, an have no idea why that happens
bmd19 said:
I have a little problem with igo , it enters igo but when it's trying to load the main screen it exits the program i am using version 8.3.2.7z. Please help
Click to expand...
Click to collapse
If you have speedcams data in content folder try to remove them.
I removed speedcams , not working , removed poi still not working . i need some good gps software . Please help .
bmd19 said:
I removed speedcams , not working , removed poi still not working . i need some good gps software . Please help .
Click to expand...
Click to collapse
did you edit the sys file to work with TD2?
try the following: (don't remember where I got it from so sorry for the lack of credit)
Running iGO 8 on HTC Diamond2 and HD:
iGO8, version 8.0: edit the following lines in iGO8\sys.txt on the memory card. This will only work in landscape mode.
[folders] app="%SDCARD%/iGO8"
[device] sdcard_dsk_num=7
[interface] maxzoom2d=6000000
show_exit=1
[interface] resolution_dir="400_240"
vga=1
[rawdisplay] class="landscape"
highres=1
screen_x=800
screen_y=480
iGO8, version 8.3: this should work in landscape and portrait as well.
[project] name="igo8_pda"
[folders] app="%SDCARD%/iGO8"
[device] sdcard_dsk_num=7
[interface] maxzoom2d=6000000
show_exit=1
[rawdisplay] highres=0
autoconfig=1
driver="gdi"
bmd19 said:
I have a little problem with igo , it enters igo but when it's trying to load the main screen it exits the program i am using version 8.3.2.7z. Please help
Click to expand...
Click to collapse
You are probably missing the 480_800 file in ui_igo8 in the zipped branding.zip file.
i did what you posted but still nothing (
you also need the modified data.zip
( IT is somewhere in this forum / else use google; igo 8 modified data.zip)
Try with this one: http://www.rapidspread.com/file.jsp?id=nyfgatbjjq
Put in your storage card, make a shortcut and write your sys.txt as follow:
[rawdisplay]
class="landscape"
driver=GX ;GDI or GX
highres=0
screen_x=800
screen_y=480
stretch=0
Enjoy
It works just fine with me.
Nice, were can i find igo8, seems to be the best navi-soft for topaz
thanks in forward
hello
i have no problem with iGO8 because i use this sys.txt :
[folders]
app="%SDCARD%/iGO8"
[sound]
ding=0
[route]
correctness=90
[device]
sdcard_dsk_num=7
[map]
2dheadup=1
3d_max_tiltlevel=9000
3d_max_zoomlevel = 3000
3d_min_zoomlevel=40
3d_max_zfar=2000
fake2d_max_zoomlevel = 3000
3d_zfar_horizon_ratio = 200
roadblockicon_maxzoom = 2000
3d_scale_carmodel=1
3dcarsizemin=1000
3dcarsizemax=2000
3dcarsizemul=2000
[interface]
maxzoom2d=6000000
defaulttilt3d=9000
show_exit=1
screen_x=480
screen_y=800
vga=1
[3d]
max_poly_segments_shown_1=400 ;makes map drawing a lot faster
min_poly_segments_shown_1=200 ;makes map drawing a lot faster
[roundaboutcam]
enabled=0
centery=20
[debug]
mapfontscale=150
skip_eula=1
[mydata]
max_favorites=150
[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"
driver="GDI"
work perfect but only in landsc. mode
rooibos said:
Try with this one: http://www.rapidspread.com/file.jsp?id=nyfgatbjjq
Put in your storage card, make a shortcut and write your sys.txt as follow:
[rawdisplay]
class="landscape"
driver=GX ;GDI or GX
highres=0
screen_x=800
screen_y=480
stretch=0
Enjoy
It works just fine with me.
Click to expand...
Click to collapse
I did all above but i get an error : faild to open file igo\240_400\loading.bmp
SOLVED works great , do you know were i can find the latest map for Romania?
bmd19 said:
SOLVED works great , do you know were i can find the latest map for Romania?
Click to expand...
Click to collapse
in the iGO shop
bmd19 said:
SOLVED works great , do you know were i can find the latest map for Romania?
Click to expand...
Click to collapse
Check this out: http://www.rapidspread.com/file.jsp?id=ewsvqmuzcd
I think that is the latest.
Cheers,
Hello everybody. My HTC HD2 just arrived and after my first boot I installed IGO 2008. The program installed ok but if I want to run it, it's closeing after first loading screen. If I want to run it again an error message apares: "Previous instance of IGO8 has not finished exiting yet.Please try again in a few seconds or soft-reset your device". I tried to install many versions of IGO and all of them have the same simptoms. I have to mention that I have installed IGO before on my previuos PDAs and I never had any problems. If anyone knows how to solve this problem please help me because I am really stucked and have no solutions whatsoever. Thank you very much.
your configuration file is ok? check location of directory, it should be /Storage Card/dir where is igo/
Thank you very much for your answer..
I checked.. I have IGO8 installed in Program Files in My Device and the original folder is named IGO8 and it's in the root of storage card.It is in the right location I guess...When I install it I do as I did so many times before.. I copy the IGO8 and 2577 folders on my storage card and tap on the autorun from the 2577 folder.The program is installing and when it is finished is trying to start.As soon as the words "INIT AP" apares in the down right corner the image shuts down, returning me at the home screen.I checked the sys file and the adress is correct : app="%SDCARD%/IGO8. I don't know what to do anymore..
you need to modify the sys.txt file, check other igo8 threads for a working one.
In your case, since you installed igo on your pda, you need to modify the sys.txt from the program files, not the one in the igo8 folder from the SD card.
traianboala said:
Thank you very much for your answer..
I checked.. I have IGO8 installed in Program Files in My Device and the original folder is named IGO8 and it's in the root of storage card.It is in the right location I guess...When I install it I do as I did so many times before.. I copy the IGO8 and 2577 folders on my storage card and tap on the autorun from the 2577 folder.The program is installing and when it is finished is trying to start.As soon as the words "INIT AP" apares in the down right corner the image shuts down, returning me at the home screen.I checked the sys file and the adress is correct : app="%SDCARD%/IGO8. I don't know what to do anymore..
Click to expand...
Click to collapse
Check your PM, and sorry for my english
Thank you so much.. It worked... I am now a happy IGO user
My version of IGO8 is not fullscreen... I dinf it really anoying... Can anyone PM the version or the steps I have to take to make it full?
Code:
[device]
type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
[folders]
app="\Carte Stockage\iGO8"
[interface]
skin="ui_igo8"
vga=1
maxzoom2d=6000000
show_exit=1
[rawdisplay]
autoconfig=1
[COLOR="Red"][B]highres=0[/B][/COLOR]
driver=GDI
[sound]
ding=0
[debug]
skip_eula=1
This is my working sys.txt. The highlighted line is the fix for full screen.
Hello I have the same problem like traianboala and I would like to know what can I do, that Igo8 will work?
Thanks for the reply.
On my SD I have the following folder structure:
SDCARD\IGO8
-> 2577\
-> IGO8\
so the .exe would be in SDCARD\IGO8\IGO8\IGO8.exe
my config didn't work so IGO had it reset and now it works all fine. here's my sys.txt:
Code:
[folders]
app="%SDCARD%/iGo8"
[interface]
maxzoom2d=6000000
show_exit=1
popup_info=1
poi_show_all_btn=1
[rawdisplay]
highres=0
screen_x=800
screen_y=480
[debug]
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
skip_eula=1
show_pedestrian=1
poi_labels=1
show_arrows_on_route=1
tts_min_ready_wav=1
tts_getaway_time=200
tts_expected_engine_delay=1400
reserve_memory=2097152
sound_q_length="200"
no_file_cache="0"
cache="1024"
enable_roadshadow=1
[map]
popup_info=1
show_labels=1
3d_max_tiltlevel=9000
[msnd]
msnd.start=0
[tts]
tts_buffer=131072
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
announce_exit_directions=1
skip_exit_numbers=0
[sound]
queue_length=200
hi
chek yours pm's
iGO 8 previous instance problem
could you please share the solution with us as well.
Thank you
hi
i can't because for forum rules.
You think is easy for me send 20 pm message's, or write 1 message in this third?
Can someone please repost the data.zip again, please?
Im using this pack http://4pda.ru/forum/index.php?showtopic=101773&st=2440&p=2963008&#entry2963008
And all good.
Forum on Russian, but all understandable. Direct link http://depositfiles.com/files/za7n7jxql
TMC and / or TTS working?
I heard that IGO 8 features Text to Speech and also TMC. Reading the forum, the TMC issue (using the HD2 radio for TMC signals) seems to be quite difficult to solve. Did anyone manage to get this working?
My Text to speech files do not work anymore. Does IGO 8 Text to Speech work with the HD2 and if yes, which version?
rschubert said:
I heard that IGO 8 features Text to Speech and also TMC. Reading the forum, the TMC issue (using the HD2 radio for TMC signals) seems to be quite difficult to solve. Did anyone manage to get this working?
My Text to speech files do not work anymore. Does IGO 8 Text to Speech work with the HD2 and if yes, which version?
Click to expand...
Click to collapse
Good question?
I had TTS before and with some update I made, TTs no works anymore
in latest release like v8.3.4.102680, they removed TTS support, cause it caused too much trouble to low memory phones.
IGO is not working-need some help
TrYde said:
Code:
[device]
type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
[folders]
app="\Carte Stockage\iGO8"
[interface]
skin="ui_igo8"
vga=1
maxzoom2d=6000000
show_exit=1
[rawdisplay]
autoconfig=1
[COLOR="Red"][B]highres=0[/B][/COLOR]
driver=GDI
[sound]
ding=0
[debug]
skip_eula=1
This is my working sys.txt. The highlighted line is the fix for full screen.
Click to expand...
Click to collapse
Hi
Made the tweaks above and I am getting a message:"program appliction database cannot be fount"
Any ideas ?
Thanks.
ChefChaudart said:
in latest release like v8.3.4.102680, they removed TTS support, cause it caused too much trouble to low memory phones.
Click to expand...
Click to collapse
I dont know if the problem is HTC Sense.
With htc Sense and HTC Leo Stock Rom 1.48 TTS dont work, if I disable Sense TTS works.
Can you figured it out
Hello,
I have installed Igo 8 on my HD2 but when I tried to fill in the place or the street in the search area, there is an strange error. In the field where normally the place's name or street stays, there are now 2 letters. An A and and Ǻ.
So in this line stays:
AǺ
When I tried to erase them with the backspace button, it won't work.
There is also an irritating beep like beep beep beep beep.
Can anyone help me with this problem?
Regard Martijn
This is my sys.txt:
**************************
[folders]
app="Storage Card/iGO8"
[sound]
ding=0
[route]
correctness=90
[device]
sdcard_dsk_num=7
[interface]
skin="ui_igo8"
resolution_dir="800_480"
maxzoom2d=6000000
defaulttilt3d=9000
show_zoombar=1
show_exit=1
screen_x=800
screen_y=480
vga=1
[map]
2dheadup=1
[device]
sdcard_dsk_num=7
[map]
3d_max_tiltlevel=10000
3d_max_zoomlevel = 3000
3d_min_zoomlevel=40
3d_max_zfar=2000
fake2d_max_zoomlevel = 3000
3d_zfar_horizon_ratio = 200
roadblockicon_maxzoom = 2000
[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"
driver="GDI"
[debug]
disable_outlookpoi=1
show_oneway=1
mapfontscale=150
show_speed_limit=1
show_poi_boundingrects=1
show_poi_areas=1
show_oneway_3d=1
speedcam_enabled=1
skip_eula=1
enable_roadshadow=1
enable_buildings=1
enable_roadsign=1
speedcam_enabled=1
show_pedestrian=1
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[smartzoom]
minangle=0
maxangle=80
[3d_config]
roadsign_lines_per_screen=20
******************************
I got absolutely same problem on my HD2, i try to issue Tech support about this. it is absolutely impossible to search :-(
Solved
It is necessary to edit your sys.ini files to add this code inside:
[device]
type="HTC Touch HD T8282"
sdcard_dsk_num=7
in your case just
type="HTC Touch HD T8282" into the [device] part.
!!!!
Take eye on that, you change sys.ini file on both paths device\Program files and SD Card\IGo8.
!!!!
Problem in my Leo has been solved this way.
Cheers,
Ondrej
Thanks.
I'll try this tonight..
Greatzz Martijn
well, I tried to fix is but it won't work either.
Does anyone know something else.
Thanks in advance.
Martijn
I confirm this issue is solved!
Following fix worked on my HD2. Thank you!
roul174 said:
It is necessary to edit your sys.ini files to add this code inside:
[device]
type="HTC Touch HD T8282"
sdcard_dsk_num=7
in your case just
type="HTC Touch HD T8282" into the [device] part.
!!!!
Take eye on that, you change sys.ini file on both paths device\Program files and SD Card\IGo8.
!!!!
Problem in my Leo has been solved this way.
Cheers,
Ondrej
Click to expand...
Click to collapse
it works it olso works when you change in igo->setting>device>use device backlight.... but when you drive it go to sleep..... so only one solution i know is type that in sys.ini..
can someone tell my how to set bigger backlight in that sys.ini or sys.txt
TO THOSE WHO HAVE PROBLEM ON IGO8 (KEAYBOARED SOUND) ON THE SAYS.INF. UMDER DEVICE TYPE: [device] type="HTC Touch HD T8282"
CHANGE THIS "HTC Touch HD T8282" TO THE FOLOWING WORD IF YOU HAVE T-MOBILE USA HD2
"T-MOBILE-LEO"
BUT IF YOU HAVE SOME OTHER DEVICE JUST FIND OUT WHAT IS YOUR DEVICE MODEL NAME UNDER THE PHONE IDENTITY ON ALL HTC WITH WINDOWS 6.5 YOU CAN FIND THESE INFORMATION ON THE SETTING TAPE UNDER (ABOUTPHONE )CLICK IT THEN YOU WILL SEE (PHONE IDENTITY )CLICK THAT YOU WILL SEE (IDENTITY ) UNDER THAT IS THE MODEL NAME OF YOUR PHONE . SO WRITE IT ON DEVICE TYPE: [device] type="MODEL NAME OF YOUR PHONE"
THEN YOUR DONE.
HOPE THIS WILL HELPE YOU GUYS
htc hd2 igo8 typing issue
pholad said:
TO THOSE WHO HAVE PROBLEM ON IGO8 (KEAYBOARED SOUND) ON THE SAYS.INF. UMDER DEVICE TYPE: [device] type="HTC Touch HD T8282"
CHANGE THIS "HTC Touch HD T8282" TO THE FOLOWING WORD IF YOU HAVE T-MOBILE USA HD2
"T-MOBILE-LEO"
BUT IF YOU HAVE SOME OTHER DEVICE JUST FIND OUT WHAT IS YOUR DEVICE MODEL NAME UNDER THE PHONE IDENTITY ON ALL HTC WITH WINDOWS 6.5 YOU CAN FIND THESE INFORMATION ON THE SETTING TAPE UNDER (ABOUTPHONE )CLICK IT THEN YOU WILL SEE (PHONE IDENTITY )CLICK THAT YOU WILL SEE (IDENTITY ) UNDER THAT IS THE MODEL NAME OF YOUR PHONE . SO WRITE IT ON DEVICE TYPE: [device] type="MODEL NAME OF YOUR PHONE"
THEN YOUR DONE.
HOPE THIS WILL HELPE YOU GUYS
Click to expand...
Click to collapse
Hello, for all those HD2 users who are having typing issues on iGO8 still not resolved after following the above instructions , just try this :
FOLLOW THE ABOVE INSTRUCTIONS UP TO THE POINT OF INSERTING YOUR PHONE TYPE , THEN INSERT INSTEAD OF YOUR DEVICE NAME "SGH-I780",SO IT WILL LOOK SOMETHING LIKE THIS
[device]
type="SGH-I780"
etc.
BOTH ON THE STORAGE CARD AND PROGRAM FILES -iGo8.
I think it has something to do with the fact that in older data zip. files there are no settings for newer htc devices, so we have to use the most similar device settings.
Worked on mine, hope it helps!
The "SGH-I780" option worked for me.
I also tried with "HTC HD mini T5555", which is the identity of my device, or also "HTC" but no success.
Thanks
S
Start igo8 go to settings
select device tab
make sure that up the top it says "Power management use device settings" and that sould fix your problem
---------- Post added at 04:26 AM ---------- Previous post was at 04:16 AM ----------
Start igo8 go to settings
select device tab
make sure that up the top it says "Power management use device settings" and that sould fix your problem
Hello,
After searching on the web but without result I hope you have a solution to my problem.
I installed IGO but when ilaunch it gives me the following error message:
FFUIERROR: Unknown layer referenced Identifier = [ui_DriverAlertPic]
Then my PDA back to the home screen.
Is this a problem with the skin?
Thank you for your help
My configuration:
HTC HD2 WM6.5
Igo 8.3.4.142975 R3
My sys.txt
Code:
[folders]
app="Carte stockage/igo8"
[interface]
maxzoom2d=6000000
show_exit=1
[debug]
sound_q_length=200
queue_length=200
show_oneway=1
show_speed_limit=1
skip_eula=1
enable_roadshadow=1
[sound]
sound_q_length=200
queue_length=200
ding=1
;0 - no ding before speak, 1 - one ding, 2 - ding-din
[rawdisplay]
driver="GDI"
;driver="GX"
;[folders]
;content="carte stockage/igo8/content"
[msnd]
msnd.start=0
[gps]
set_messages=0