Hi, I've searched alot and it's hard to find something that work for me.
I use a WWE rom and therefore I've installed a cab that adds a Swedish T9. But I can't add words to it. Is there a way to edit the dictionary (add, delete, edit words)?
The eT9mywords doesn't work for this. (when I try to add a word, it doesn't add it).
For example my curent T9 suggest "YOU" instead of "you" (but in swedish of course). So if it exist a better version of Swedish T9 it might solve my problems.
I hope their is a solution for this!
/C
Related
What's the easiest way to add a language? I prefer not to mess with the ROM, and I know I can get multiple language support with a third party software like touchpal, but is it possible to add one langauge (for T9 and/or spellcheck) without adding any software?
actually just tried touchpal and it's pretty good, no spellcheck but the T9 should be enough, I think I'll stick with it
Language packs for spelling checkers exist, for instance made by Molski.biz. These are just cab files you have to install. You'd have to search around a bit on this forum.
Hi there..
I know I can install a single language with a t9 cab file. But what I need is installing many languages in a single go. They are used on the Imate SPL.
I have quite a few Imate SPL phones to sell and installing single languages takes a lot of my time, so a single big file would save me trouble. I could install all languages seperately with Active Sync, but then I need something that can adjust the registry so that they are all available from the t9 menu, now only the last one installed shows.
I use all the languages from this page, from Czech to Turkish (no Chinese)
http://melgurth.ovh.org/index.php?page=downloads
Only for Portuguese I use another one, because the one from the page doesn't work. I use this one:
http://rapidshare.com/files/71913751/t9_Eng-Portug.rar
Of course I don't want to be a free rider, so the first to make me a fully working multi language .cab file or a proper registry edit thingy gets $100!
Maybe it already exists, well that is also worth it to me, let me know please.
adriaanb said:
Hi there..
I know I can install a single language with a t9 cab file. But what I need is installing many languages in a single go. They are used on the Imate SPL.
I have quite a few Imate SPL phones to sell and installing single languages takes a lot of my time, so a single big file would save me trouble. I could install all languages seperately with Active Sync, but then I need something that can adjust the registry so that they are all available from the t9 menu, now only the last one installed shows.
I use all the languages from this page, from Czech to Turkish (no Chinese)
http://melgurth.ovh.org/index.php?page=downloads
Only for Portuguese I use another one, because the one from the page doesn't work. I use this one:
http://rapidshare.com/files/71913751/t9_Eng-Portug.rar
Of course I don't want to be a free rider, so the first to make me a fully working multi language .cab file or a proper registry edit thingy gets $100!
Maybe it already exists, well that is also worth it to me, let me know please.
Click to expand...
Click to collapse
i dont think this is a problem
or you may chang your ROM,this is a better way
add input changer in your settings, cpl.xml control it
Find what`s difference in the cab:
reg:
[HKEY_LOCAL_MACHINE\T9 Input Method\IME]
"0400"="t9AW.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method]
"Current IME"="0400"
"Current LDB"="0405"
"Default Alpha LDB"="0405"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="T9Ime.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\LDBs]
"0405"="T9CzechLdb.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\LDBS]
"0405"="t9 Czech"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages]
"Available"="0405"
you can chang it to:
[HKEY_LOCAL_MACHINE\T9 Input Method\IME]
"0400"="t9AW.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\0405]
"Current IME"="0400"
"Current LDB"="0405"
"Default Alpha LDB"="0405"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="T9Ime.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\LDBs\0405]
"0405"="T9CzechLdb.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\LDBS\0405]
"0405"="t9 Czech"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages\0405]
"Available"="0405"
and other reg
.....
.....
FILES:
t9 czech.cab:
T9AW.dll 47kb
T9AWEngine.dll 154KB
T9IME.dll 82kb
T9ImeRes.dll 10kb
T9imePrefs.dll 29kb
T9CzechLdb.dll 122kb
T9ImeRes.Dll.0405.mui 11kb
t9 Danish.cab:
T9AW.dll 47kb
T9AWEngine.dll 154KB
T9IME.dll 82kb
T9ImeRes.dll 10kb
T9imePrefs.dll 29kb
T9DanishLdb.dll
T9Imeres.Dll.0406.mui
t9 English.cab
t9 Portuguese.cab
.....
.....
you see,just the two files are different
or you can send me a ROM you use,i will try..
Easy
lovebabyjing said:
i dont think this is a problem
Click to expand...
Click to collapse
Thats true!
If he really give 100 US$ to that person who did that 30min work that would be a easy earned money! ;o)
If you want to - I can do it for you!
Hey everyone. I've got a Samsung I600 but its USB port seems not working now...
The ROM is WM6.1 OS and preinstalled with a Chinese input software (But not T9, I don't see any T9 in this ROM..)
THE THING IS, that I need to type in Russian alphabets, so is there any kind of input software for QWERTY keyboard to type in Russian alphabets?
I searched for the forum but only found Russian input softwares for touch-screen devices. Such as Resco or FingerKey etc. etc.
If necessary, I'd rather delete the original Chinese input software for the privilege of typing in Russian....
THANK YOU SO MUCH!
=================================
Update a bit,
I renamed the folder of Chinese IME and successfully blocked it (It's in some way just like a cockroach for me...). And I installed the T9 Russian input to my i600 device successfully.
tinyurl.[com]/ybvsq8a
But the question is, that the T9 that I installed is for Numpad phones, i.e. the keyboard layout is completely out of control! And to type in Russian I can only use num keys instead of qwerty-йцукен keyboard.
I wanna solve the problem cos it also affects my English input. that is to say, if I switch to ABC mode, Q=Q,W=W, but T=а\б\в, U=г\д\е etc. etc.
I checked the document below but was baffled, cos it's for German and the keyboard is completely different, I can't find where to put Б and Ю on my i600 keyboard...
tinyurl.[com]/y4kux3l
SO...I STILL NEED HELP..
Maybe a specially designed T9 for qwerty keyboard will work or, I want to know how to redefine i600's keyboard layout.
THANK YOU SO MUCH!
Нужен русский ввод? http://4pda.ru/forum/index.php?showtopic=130389&view=findpost&p=3016826
caramba_sda said:
Нужен русский ввод?
Click to expand...
Click to collapse
But I've got no T9 in my ROM.... so this won't work.
I'm just wondering if there is any kind of software, for example that creates a virtual keyboard for Cyrillic alphabets or something like that...?
BTW How to say 'Input software' in Russian? I looked for it in the dic but no clues...
keanekwok said:
But I've got no T9 in my ROM.... so this won't work.
I'm just wondering if there is any kind of software, for example that creates a virtual keyboard for Cyrillic alphabets or something like that...?
BTW How to say 'Input software' in Russian? I looked for it in the dic but no clues...
Click to expand...
Click to collapse
try this:
"программа ввода русского текста"
Hi all,
I'm very fond of the program "quick menu", and it works like a charm when on a non swedish rom, but when I use a swedish rom (any) all I see is gibberish in the text (chinese or something -lookalike).
Was wondering if anyone know a way to fix this as I'm very addicted to this software.
Sincerly,
/Martin
The language code can be found in the registry: HKLM/MUI. English is 0409, Dutch is 0413.
If you know your language, you can also look it up: http://www.microsoft.com/globaldev/reference/win2k/setup/lcid.mspx
Copy QMenuCfg.dll.0409.mui to QMenuCfg.dll.0413.mui (or whatever your language code is) and do the same for QuickMenu.exe.0409.mui.
Close QuickMenu or reboot you PPC...
I screwed up.. change the MUI to english hoping that would do something, and now I don't remember what swedish was (didn't change anything though). And the link. How do I find the swedish MUI again, without hard reset? :/
::edit:: found it, and testing your way. But I don't think it has swedish support. All I see are squares and a few words spelt in english.
Where do i find QMenuCfg.dll.1053.mui??
Edit 2:::: fixed it by downgrading to 2.7 instead of 2.8
broman.m said:
I screwed up.. change the MUI to english hoping that would do something, and now I don't remember what swedish was (didn't change anything though). And the link. How do I find the swedish MUI again, without hard reset? :/
::edit:: found it, and testing your way. But I don't think it has swedish support. All I see are squares and a few words spelt in english.
Where do i find QMenuCfg.dll.1053.mui??
Edit 2:::: fixed it by downgrading to 2.7 instead of 2.8
Click to expand...
Click to collapse
Yeah, I just found this info and did not test it as I use the default WWE.
Glad you fixed it.
Hi,
I have a little problem with SlideIT polish dictionary. It's very poor and I have to still add new words. But I found polish scrabble dictionary in txt file and here is my question:
can someone edit .dat file of word database and add my word base from txt file?
here's my database:
http://www.speedyshare.com/files/27295169/slowa-win.txt
and here's slideIT database
http://dl.dropbox.com/u/7688082/pol_ver2.dat
I hope someone will find some time to work with that.
when was the last time and how often do they update the slideit program?
donno but polish dictionary haven't been updated for ages so I'm asking for help here..
anyone can help?
can the autocorrection dictionary be turned off. i use text speak alot and there's no filipino language support so it's really annoying to have it correct everything i type