Not sure if anyone else has noticed this, but I flashed my TILT to the HTC ROM (excellent work everyone btw), and after using the device for about a week, I've noticed this strange bug.
Start at the Today screen with the keyboard out
Start dialing by name (example, type V E L M A)
The first letter will work correctly, but when you press L on the dailpad screen, you get an X. The output will be VEXMA instead of VELMA.
Start over (go back to Today screen), and try pressing V V which should bring up "VV", but instead brings up "VT".
Apparently there are some key mapping problems in the dail pad screen at least on a TILT flashed with the Kaiser ROM. I have applied the key mapping fix from the sticky post, and I'd like to see if someone else has this problem too!
In addition, there are MANY letters that do not work correctly, some do not work at all in the dial pad!
Verified here too. It's a bug in the smartdialer when running on the tilt. Will be interesting to see if:
it works ok on a tytn II
everything is ok with the AT&T rom
yes to both = interaction bug (I guessing this will be the case)
Unbranded HTC Tytn II, running HTC stock rom... no problem.
VELMA and VV work correctly.
just tried this on my tilt flashed with an HTC (MFG) ROM and this is definitely a confirmed issue for Tilt handsets flashed with the HTC ROM. Hopefully someone can figure out where the keymapping problems are coming from.
btw, i have TaurusBulba's Tilt keyboard fix installed, have yet to try without his keyboard fix
Nm, fixed my problem.
that is strange I wonder if its in the registry since you are using the same smartdail.dll since you are running the HTC ship ROM. I also confirmed I have no issue on a HTC TyTN II
Hey guys. Fixed the problem. I've updated the Tilt keyboard fix here.
**** taurusbulba i wish i could say the new fix worked but now i get "TEXMA" when i type in VELMA from the today screen
hmmm.... I installed your cab tb & now keys aren't mapping into the smart dialer at all. Pressing from today brings up phone app but not the smart dialer. Is there another reg entry under HKLM\HTC\SmartDialing perhaps?
edit: @Taurusbulba: if you have a tilt running AT&T ROM, can you dump hklm\Software\HTC\SmartDialing & all subkeys plz?
Sure wish I had tools that could dump this ROM...
Try removing the fix via Remove Programs, soft reset, then install the updated cab and soft reset again.
I did this and it worked fine.
Doug2873 said:
**** taurusbulba i wish i could say the new fix worked but now i get "TEXMA" when i type in VELMA from the today screen
Click to expand...
Click to collapse
Have you done what vasquja mentioned? Uninstall the old, soft reset, install the new, soft reset? It's working perfect for me.
At the moment I'm using a Tilt with the stock HTC ROM. Out of curiosity, what ROM are you using?
Here ya go Sleuth....
youre correct it works now, thanks.
hi
currently im using
duttys wm6.1 wwe 042908
with radio: 1.64.08.21
been using this a while and have loaded a few apps and finally got it customised the way i really like it so am really loathed to use another rom, am not really a fan of the diamond stuff coming out and the rom im using seems to have 95% of everything i ever wanted (think ive added the htc home customeriser, powertray advanced and opera) however 2 issues would appear on this rom they are minor however the last one is annoying as i am a texter not a talker
1: 3g/gprs icon:
when im in a 3g area all good i have a 3g icon however when im in a gsm only area and can only pick up gprs or have 3g mode turned off on the stock rom used to have a G to signify this however now i have to arrows with an x next to it, does any one know how i can change this so it shows like it used to on the stock rom by having a G?
2: (have done some research into this and cant find anything useful so sorry if this is a known issue) deleting using the del key on the numeric keypad sometimes it will delete the word the cursors infront of and sometimes it will delete letters behind it usually toggleing the Fn button can fix this but it seems to have a mind of its own any clues how to fix this?
thanks allot for any help as i think going a lil mad with the keyboard issue and my girlfriend loves what ive done to my kaiser and wants me to do it with hers but shes hesitant until these 2 issues are ironed out
thanks
ben
i seem to have fixed the kayboard issue from this post
http://forum.xda-developers.com/showthread.php?t=419879&page=2
and also the G icon
http://forum.xda-developers.com/showthread.php?t=412875
if any one else has same probs hope this helps my questions were already answered just didnt find them
Hi.
I have just installed Tomtom (vga-version) on my Touch Pro and found, that when trying to enter an Adress with the slide-out Keyoboard an aditional character is added after each pressed button. This Means: i press "a" and "a°a" appears on the screen.
Does anyone else have the same problem or maybe found a solution?
Never noticed that problem before. Using last version of TT7. Maybe a rom issue with the keyboard driver.
Usually I'm using the soft keyboard of TT7
Pizzamaka said:
Hi.
I have just installed Tomtom (vga-version) on my Touch Pro and found, that when trying to enter an Adress with the slide-out Keyoboard an aditional character is added after each pressed button. This Means: i press "a" and "a°a" appears on the screen.
Does anyone else have the same problem or maybe found a solution?
Click to expand...
Click to collapse
This is also happening to me, stock WWE updated ROM with TTN7 7.915. This is soooo lame!
fun_key said:
This is also happening to me, stock WWE updated ROM with TTN7 7.915. This is soooo lame!
Click to expand...
Click to collapse
I can also confirm that this is happening to me with TT 7.915. I'm not completely sure, but I don't think it happened to me with TT 7.910
Do you all use the vga-version? I think it did not happen with the not-vga version that was preinstalled on my device.
I tried with 910 and 915, and I still get this issue :-/
Its hapening to me also. im using TT7.450 (VGA)
Buts not a problem to me. Tomtom is very fingerfriendly and it goes very smooth.
On a slightly different issue, what sort of refresh rate are you getting on TomTom in terms of map redraws per second? I'd guess I'm only getting one, maybe two, but I've seen Sleuth's video, and he looks to be getting 3 or 4.
Any ideas?
Cheers,
Steve.
I also have this issue, although I never use the keyboard while navigating. If you didn't mention it I would have probably never noticed it! LOL
@maw: Well I bought a PDA-holder for my car which holds the Touch pro with the open keyboard, since I thought, that it would be really cool (which it is if it wasn't for the keyboard not working properly in tomtom)
@StevePritchard: I am not sure, but I think I get about 1-3 fps in Tomtom.
did you upgrade your ROM and noticed this problem? As I never used the keyboard with the previous stock ROM I can't say if the ROM upgrade effected the Tomtom interface with the keyboard. I updated my stock ROM with the new version that just came out. Maybe that is the problem, I don't really know.... Very good of you to signal this problem though. Otherwise I don't think this problem can be fixed, I guess we'll just have to wait on a new version of Tomtom to fix this problem. Have you reported it to Tomtom?
no I did not upgrade. I didn't even know, that there is an available update. I am running the stock rom (from o2 germany) that came shipped with the phone.
Is there an update from htc?
No, I did not report, since my Version fell from a truck... I was just wondering whether it was damaged during the fall or if everyone has this problem. ;-)
Pizzamaka said:
Hi.
I have just installed Tomtom (vga-version) on my Touch Pro and found, that when trying to enter an Adress with the slide-out Keyoboard an aditional character is added after each pressed button. This Means: i press "a" and "a°a" appears on the screen.
Does anyone else have the same problem or maybe found a solution?
Click to expand...
Click to collapse
Its a TomTom error, the newer TT versions dont have that problem.
I used to get this when running Elite RC2 - I moved to ROMeOS and never had the problem
komani86 said:
Its a TomTom error, the newer TT versions dont have that problem.
Click to expand...
Click to collapse
What do you mean by newer versions? I use 7.915 - Is there anything more recent?
I'm getting the same problem, and I've got 7.915 as well. No-one found a solution then?
i had this problem on 3 different versions of tomtom, along with hit or miss signal. it always thinks im inside a building but in the 1/20 shot it works i cant do anything or else "im inside a building" again. i just dont think tomtom was meant for the fuse
It is not a TOMTOM issue. It is an issue with the IME. Here is the fix.
I have attached KforTouchPro_v1.0.0.3.CAB
1. Install the cab
2. It installs to your games folder because this is a fix for several games that have had this issue (I originally discovered it because I had issues using the HW keyboard with logmein)
3. click the Switch to M$ IME button. Now you are good to go!
Thanks - I have just tried it, and TT now works fine.
The problem now is, that other things don't work anymore... I tried writing an E-Mail and it wouldn't let me abort the mail. It displayed the Messageboc, but did not accept any input. Since I write more Mails than I use TT and don't like to keep on switching Keyboard map I is not a real option.
Do you have any Idea?
Hmm.. odd, when I updated my TomTom it just disappered, I have your version aswell, good that there is a update though for you
that K for touch pro, is that KforRaphael that maps certain keys for MorphGear?
I had that installed, but cant recall if it was erroring before that, anyways, good it got solved
Hello!
I've been trying to fix that for months and still no success so i'll ask - does anybody have an idea why the suggest word function is not working at all? I have it turned on on settings/keyboard, i have it turned on from programs such as Diamond Tweak and Advanced Config and still nothing. It's very annoying and I would be very happy if someone can help me.
Thanks in advance!
Reni
So they tell me after i switch phones that internet will work in 1 hour.. It doesnt so today i try and ask for help. They ask me to dial ##3282# which for half a milli second goes to the edit option then goes back to dial pad. So that doesnt work, they then tell me to hit the update profile button "which is under the tv out button in system settings" but its not there.
This is what i tried using
MightyROM_RhodiumW_062010 (11400)
Its very frustrating. I tried the mR X rom and it was totally sluggish and boring.
so i said fuk it and flashed 6.5 windows on the phone instead of custom rom (and guess what the setting was there and dialing ##3282# works .. how lame is that mightyrom,..
i didnt see anything telling me to install custom cab or that my internet would not work with mightyrom..
I spent along time programing my contacts into the new mightyrom thinking the internet would work then had to delete them all when switch roms.
I went with sprint lovers 6.5.x and seems great has the one thing that mightyrom had that i wanted wifi router. And has sprint navigation too (which mightyrom doesnt and office 2010 along with tons of other options and cool bigger icons) Very pleased with sprint lover rom not sure if i will even test anything else.. (sprint lovers rom actually has update profile but also can not dial ##3282# )
you know, i dont post much on there but the one thing i do is READ. There is nothing wrong with mightyrom and the internet works just fine in it. ( i have ran it several times before myself ) as for programs go search for the cabs and install them. Doesnt anyone search on how to fix problems anymore?
dude u probably just didnt know what you were doing. If you had to sit there and program numbers back instead of having sense and backing up the numbers that already shows how much of a genius you are. Not trying to diss but just pointing out the obvious. Instead of blaming someone else try looking at your own errors cuz I never had any problems out of any of those roms
Meh, I have that ROM and it works fine. I have the PRL/Profile cab, and Office 2010 Mobile for it. Wifi router works great Mike!!!
This guy just posts crap in a lot of forums guys.
atl530i said:
Meh, I have that ROM and it works fine. I have the PRL/Profile cab, and Office 2010 Mobile for it. Wifi router works great Mike!!!
This guy just posts crap in a lot of forums guys.
Click to expand...
Click to collapse
Thanks. Was considering giving it a try, but was almost put off by the op.