pocket pc as blueooth headset adapter - HD2 Windows Mobile 6.5 Themes and Apps

HI,
Is there an application that can make our HD2 as bluetooth headset/adapter? I have two pocket pc, and i want one as one bluetooth headset.
thanks.

I am looking for this for ages, but could not find a solution yet

Related

Blue tooth head set - but not for phone?

Is it possible to use a bluetooth headset for ALL audion not just the phone? I already use Pocket Skype but I want to be able to use my bluetooth headset - since it doesn't consider the Skype to be a phone call - how can I make it use the headset for all sounds produced by the device?
All help and advice appreciated. All good advice and help appreciated more. All useful advice and help... ah, now we're talking!
M
think people have been able to get headsets working for normal audio using the broadcom or vidcomm bluetooth stack insted of the ms one
but it also seems that those bluetooth stacks dont support the headset profile so people cant use their headset for phoning anymore
Interesting catch 22 - phone bluetooth or other sounds bluetooth - but not all sounds bluetooth.
Isn't it silly things like this that make a great device irritating?!(Rhetorical)
yes it's silly
guess it comes down to ms not liking bluetooth which they dident invent themselfs so their stack is kinda thin
not sure what vidcomm and the rests's excuse is
i personaly bougth the bluetake iPhono headset which have a dongle which makes it possible for me to use my headset to work with both
phone and music
yes it's silly
guess it comes down to ms not liking bluetooth which they dident invent themselfs so their stack is kinda thin
not sure what vidcomm and the rests's excuse is
i personaly bougth the bluetake iPhono headset which have a dongle which makes it possible for me to use my headset to work with both
phone and music
If what you say is correct, then there is a bit of a conundrum. The telephone operates via the bluetooth stack - so how does the gps receiver connect? There is apparently a way for the PC element of the device to use bluetooth, so why not audio?
I think using an external Btooth transmitter id a bit OTT. This is a software fix requirement.
If what you say is correct, then there is a bit of a conundrum. The telephone operates via the bluetooth stack - so how does the gps receiver connect? There is apparently a way for the PC element of the device to use bluetooth, so why not audio?
I think using an external Btooth transmitter id a bit OTT. This is a software fix requirement.
Rudegar said:
yes it's silly
guess it comes down to ms not liking bluetooth which they dident invent themselfs so their stack is kinda thin
not sure what vidcomm and the rests's excuse is
i personaly bougth the bluetake iPhono headset which have a dongle which makes it possible for me to use my headset to work with both
phone and music
Click to expand...
Click to collapse
Hi, I am thinking to buy the Bletake Bluetooth I-Phono BT420Ex + BT430EX with my Qtek 2020 / Xda II, And I want to know it will work properly... my ROM it´s 2.20CHS.
And if yours answer it´s positive, how?
You connet the audio dongle to the output of the pda and the headset with the pda by BT?
Thanks
yes as bluetooth headset it's supported
and the xda dont have to support the dongle
as far as the xda see it the dongle is just a wired headset
the dongle take care of everything wireless
heck if you want you can connect the dongle to something else
and still have it as bluetooth headset for the xda at the same time
when you get a call the headset disable the audio from the dongle and act as a normal bluetooth headset
Hi,
according to this post http://forum.xda-developers.com/viewtopic.php?p=245461#245461 , I assume that you have this bt headphone and you have used it with satisfactory results...
Now, I still have a few doubts :
1) Do you connect the dongle to the pda and use it to listen music?
2) You use the bt manager of the pda as a handsfree?
3) Or do you use the dongle with the pda to both listen to music, and talk on the phone?
4) Or do you never use the dongle at all...?
5) Did you upgrade the bt manager of the pda? If this is true, where can I do it in the forum?
Thanks for all...
1 yes
2 yes
3 only needed when i listen to music
i just use bluetooth tools
and the org ms bluetooth stack
if one have a bluetooth stack which support a2dp
the dongle is not needed at all
Thanks!!
Many thanks for your patient and reply.
Searching at the forum I found this links, may be interests you...
http://forum.xda-developers.com/viewtopic.php?p=245660#245660
http://forum.xda-developers.com/viewtopic.php?t=33532&postdays=0&postorder=asc&start=325
http://headwize.com/showfile.php?file=announce.htm
Again Thanks A lot.

How do I route (phone) audio to computer via BT?

Hi guys,
I have an XDA ATOM and a BT dongle using Bluesoleil.
I've paired them both up and I am able to use the computer as a "Wireless Stereo" - thus rerouting music/sounds to be played via the computer speakers. Now I can play mp3's and other audio from my PDA direct on my computer speakers.
This is great, but not exactly what I hoped for. I was hoping to route the phone audio instead ("Wireless Headset"). That is, routing the audio that I hear when I'm in a phone call. I've configured the Bluesoleil application to have the "Wireless Headset" service enabled, along with all the other services.
The weird thing is, my Atom only shows up "Serial Port" and "Wireless Stereo" when paired with my computer.
Any ideas on how I could get it working?
Thanks in advance.
Hi,
You need to set yr Atom as Handsfree in yr Bluesoliel BT Software....
hdubli said:
Hi,
You need to set yr Atom as Handsfree in yr Bluesoliel BT Software....
Click to expand...
Click to collapse
Hi,
Thanks for replying.
How exactly do I do that? I dont get any options which I can change when I'm pairing up the ATOM with my computer. It pairs up as a "Device name" and then BlueSoleil picks up all the services the ATOM is compatible with, ie. DUN/File Transfer. It doesnt seem like its possible to specify the ATOM to be a handsfree device in BlueSoleil itself.
look for the services after the device discovery..there are options for BT Audio..
I'm able to connect to my computer and use the Audio Gateway (in the headset mode) (computer is being used as the headset)
I can enable the handsfree when in a call. I'm able to see the number of the caller on my computer when the phone rings. I can answer the call from my computer.
Problem is I can't hear a thing.
I have switched the audio mixers between Realtek AC97 Audio (my soundcard), Bluetooth Audio and Bluetooth High Quality Audio and I still can't hear a thing. Is there a way to map my BT dongle's audio gateway output to my soundcard?
BUMP.... anybody?
The BlueSoliel software is notoriously crap, it's why it's used on all the cheap dongles, because they charge so much less for their licenses.
This should work fine with the Widcomm bluetooth stack on your PC, I have done this before as it was nice to use my PC's headset while I was gaming to take calls also.
Haven't tried it in a couple of years though, but it definately worked with Widcomm.
if i were to get a bluetooth dongle i would buy one directly from broadcom
(who makes the widcomm software)
because even if other makers also license the software
broadcom release firmware to match the later versions of widcomm
if other dongle makers dont newer versions of widocmm dont work or dont work very well with the software
Well that's the thing... with Blue Soliel I would expect this kind of a problem, but I have a dongle which uses the Widcomm Stack. I've tried everythign possible and yet no sound. I even tried it with another laptop which was using a Blue Soliel donle... tried doing it both ways... ie accessing sound on both ends... but nothing.
BUMP........

Integrating trinity with car

I am looking for a quick and easy way to integrate my trinity with my car.
Currently I have have a generic car mount with charger. However, I find that TomTom and telephone calls over the speakers are too quiet.
I was thinking of installing a Parrot MK6000 in my car as a method to stream audio from my trinity to the car stereo whilst also acting as a car kit for hands free use while driving. Has anybody had any experience with wiring up this kit? is it easy for a moderate level electronics users (able to solder wires proficiently etc.) to wire up?
Alternatively does anybody know of other solutions to integrate the trinity with the car stereo?
Hello:
I installed this hands free in my car, and it works really fine as a hands free. The audio streaming works well too, but the sound is quite methalic. With tomtom, there is a delay in the sound, the first word it says, for example "...Turn on the left in...." you listen "...urn on the left in ..." and it hanpens allways when tomtom starts to talk.
My OS version is wm5 and I read that wm6 solves this problem.
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
stormyb said:
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
Click to expand...
Click to collapse
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
esackbauer said:
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
Click to expand...
Click to collapse
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
stormyb said:
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
Click to expand...
Click to collapse
Actually I bought the Sony because it supports A2DP. And with MortPlayer it works flawless when listening music. With activated Bluetooth Stereo (Headphone Symbol in top bar) Tomtom still uses the internal speaker.

How to make WiMo my laptop headset?

Hy All, I'm looking for a driver or bluetooth application that helps me make my Windows Mobile my headset from laptop speakers.
I know that is possible to use Stereo Headset from WiMo to stream audio over bluetooth from WiMo to laptop. But what I'm looking is the reverse.
Anyone knows how to find it?
Please, don't tell me to buy a bluetooth headset (because I have 3). It's a enterprise project that I'm working on and the headset needs to be the WiMo device.
Regards,
it's up to the bluetooth stack on the pc if it shows the pda as a audio gateway you can
if it don't you have to get another bluetooth stack which does may require another bluetooth dongle if the one you have don't support the bluetooth stacks which support the audio gateway profile
Rudegar said:
it's up to the bluetooth stack on the pc if it shows the pda as a audio gateway you can
if it don't you have to get another bluetooth stack which does may require another bluetooth dongle if the one you have don't support the bluetooth stacks which support the audio gateway profile
Click to expand...
Click to collapse
That's is the problem. How can I configure my bluetooth application on the PC to recognize the PDA as a Headset so I can configure later as a default speaker of my computer?
Any clues? I'm using the defaul driver and bluetooth program of Windows 7.

[Q] headphones bluetooth with wire

Hello
I want to use something like this (see photo)
but..... someone knows if this is compatible with bluetooth of HTC Pro 2 windows 6.5 ??????????
Don't know that one, but i use JABRA STREET (BT3030) on my htc HD2. Plug in what you want, std earplug. Can walk ~10-15mtr out in garden listen to music and answer tfo. Great for me
Thanks for the post ..... And saw the BT3030. Some time ago I was looking for a headset for my phone for calls and music. Now I'm looking for some headphones for my Ipod Touch, a wired headset. I prefer cable for improved battery life. But when I use my iPod I can not hear or feel the phone. All I want is a headset that can be used with the iPod, but when someone calls, interrupts the music to respond to respond.

Categories

Resources