Related
I was reading the threads in the dream forum and found his progress and instructions. I added them to my wiki so they can be continually edited and updated as new methods are found. I did not have any part in this but I noticed that there was not a formal post here about it yet so I decided to make one.
http://android-dls.com/wiki/index.php?title=Magic_Rooting
Please feel free to thank him with some nesquik if you find this helpful!
I was pasting the new instructions here every time they changed but they seem to change often. Please visit the above url to see the current instructions. They were placed on the the wiki so anyone could make edits and changes to them, which is useless if this post needs to be updated each time. I wish vbulletin had some sort of wiki quote that could auto read that page and insert it here for me
Great!
If would be great if this post were a sticky. It also would be nice it the post was updated to include the instructions here as well.
Thanks,
Anders
Just quoting the solution here..
First of all, everyone owes Haykuro a great big thanks for working on this and helping create the solution without even owning a magic. The following is his method just reworded slightly.
1. To gain root access on your HTC Magic/Sapphire you will need to download the magic-root-boot.img zip file and unzip it so that you have boot-new.img in a location you can find.
2. On your device, enter the bootloader by trying one of the following
* Turn off your device and while it is off hold down home while you press power.
* Turn off your device and while it is off hold down volume down while pressing power
3. Make sure your usb cable is inserted and you have Fastboot installed and ready to use.
4. Type the following commands on your desktop (not on the device):
Code:
fastboot boot boot-new.img
5. wait for the following to flash and the phone to reboot:
Code:
downloading 'boot-new.img'... OKAY
Code:
booting... OKAY
6. make sure you have ADB installed and run the following commands from your desktop (not on the device):
Code:
adb push boot-new.img /sdcard/boot-new.img
Code:
adb shell flash_image boot /sdcard/boot-new.img
anyone tried this?
I was going to post the actual text here but the reason for doing it in the wiki is because the methods seem to change very often (the g1 method changed almost daily for a while). I would still recommend viewing the instructions on the wiki before performing the method to be sure they are the same at the time of use.
Full procedure so far!
1. Download boot-new.img.zip from http://www.droiddeveloper.com/hrbuilds/boot-new.img.zip
2. extract boot-new.img to computer.
3. Download recovery-new.img.zip from http://www.droiddeveloper.com/hrbuilds/recovery-new.img.zip
4. extract recovery-new.img to computer.
5. power off device
6. hold BACK+POWER (or VOLUME_DOWN+POWER) to boot into bootloader.
7.
Code:
[b]fastboot boot boot-new.img[/b]
wait for device to boot.
[b]adb push boot-new.img /sdcard/boot-new.img[/b]
[b]adb push recovery-new.img /sdcard/recovery-new.img[/b]
[b]adb shell flash_image boot /sdcard/boot-new.img[/b]
[b]adb shell flash_image recovery /sdcard/recovery-new.img[/b]
[b]adb shell reboot[/b]
you now have root build, and can flash whatever build you like (test keys and all)
First post and wiki updated to show these changes in more detail.
Hi,
I have a french Magic and I test this solution.
I have a problem, when I use the adb shell, I am "root", but when I use a terminal shell on the phone I'm not "root". I use "id" for my test.
How can I do ?
Thanks.
Edit : Ok I found the problem.
I make these commands after in adb shell:
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cd system
# cd bin
# cat sh > su
# chmod 4755 su
# sync
# reboot
Thanks
n00b here
can we flash ROMs for dream too or need to wait for magic ROMs ?
it's possible to backup the current firmware of my magic (with or without root), before flashing a new one?
thank you for rooting the magic
thank you for your help
ok i have a big problem when i put (fastboot boot boot-new.img) the phone is restarting every time in htc presentation :S
i put the phone in recovery mode ( fastboot usb ), but then i have the same problem, when i put fastboot boot boot-new.bin, the phone restart always with "boot.bin" , no with "boot-new.bin"...
i try to give the complete path, but always the same result
hello i have a problem.
if i write fastboot boot boot-new.img the console says: the comand "fastboot" is incorrect or bla bla ...
i have a german magic.
sr-ha said:
hello i have a problem.
if i write fastboot boot boot-new.img the console says: the comand "fastboot" is incorrect or bla bla ...
i have a german magic.
Click to expand...
Click to collapse
do you have installed de SDK ¿?
hmm no i dont
should i install it the android sdk 1.5 windows ??
i hve downloadet it but i cant find a icon or sth. to install the sdk
nicola_it said:
it's possible to backup the current firmware of my magic (with or without root), before flashing a new one?
thank you for rooting the magic
thank you for your help
Click to expand...
Click to collapse
nandroid backup 2.1, avaible in recovery mode, doesn't works
sr-ha said:
hmm no i dont
should i install it the android sdk 1.5 windows ??
i hve downloadet it but i cant find a icon or sth. to install the sdk
Click to expand...
Click to collapse
unrar de SDK, and in the "tools" directory you have the ADB and FASTBOOT aplications ( use in the console mode )
Works perfectly with XP, not with vista or win7
sorry but i dont understand what schould i do.
with use in thee console
i think i have to install fastboot or open it. but i cant do nothing of both. if i click on the fastboot exe it blobs open and fast close again.
under windows xp all ok
under windows vista no!!!
Hello.
I cooked a rom with some changes and my question is... How can I try it? I know there's a metod to emulate roms, but I want to check if the update.zip is signed correctly, so what I want is to emulate recovery or fastboot, but I can't.
Somebody knows how to do it?
Thanks.
realjumy said:
Hello.
I cooked a rom with some changes and my question is... How can I try it? I know there's a metod to emulate roms, but I want to check if the update.zip is signed correctly, so what I want is to emulate recovery or fastboot, but I can't.
Somebody knows how to do it?
Thanks.
Click to expand...
Click to collapse
should be moved to Q&A
but i have the same questions i went through everything emulator related on the android site and through the command line help functions and i got as for as creating a sysdir image and i got stuck where you do the kernel image .....
I only found this:
http://android.modaco.com/content/g...p-and-running-a-full-rom-with-the-market-etc/
But I can't enter in bootloader or fastboot with [Home Key], [Back Key], o [Menu Key] While it's loading.
what SDK are you using (HUGE DEAL)
if your using the latest SDK have you precompiled your AVD profile (android virtual device) see http://developer.android.com/guide/developing/tools/avd.html#creating
if you have compiled your AVD and pointed your emulator at the correct AVD profile
http://developer.android.com/guide/developing/tools/emulator.html
if your booting an actual update.zip youll have to flash do a NAND dump of the phone and copy your NAND files to your pc and boot those through your emulator to ensure it runs correctly
(i only say this because i dont know if its possible to enter recovery mode straight from the emulator)
you place your system.img and your AVD stuff in the same folder
9. Copy the above file (referring to system.img{which would be the dump of your /system folder in a img format} to the location of the enhanced.avd directory ('C:\Documents and Settings\<user>\.android\enhanced.avd' on Windows XP, and 'C:\Users\<user>\.android\enhanced.avd' on Windows Vista).
10. You're ready! Type 'emulator -avd enhanced' to run! Note: inital boot may take a few minutes!
Click to expand...
Click to collapse
::::EDIT:::::
if you did have success making an AVD or know where i can find some premade profiles for the HTC Magic/Dream lmk
:::EDIT2::::
i just gotta finish downloading my JDK and i can get it to boot
does anyone know how to compile a system.img from just my /system folder or in essence can the /system folder just be booted without having to compile it into system.img format?
Zarboz said:
does anyone know how to compile a system.img from just my /system folder or in essence can the /system folder just be booted without having to compile it into system.img format?
Click to expand...
Click to collapse
I may be dead wrong, but you can extract a .img file to the system folder contents by unyaffs-ing it, so I assume you could do the reverse...maybe.
bcrook said:
I may be dead wrong, but you can extract a .img file to the system folder contents by unyaffs-ing it, so I assume you could do the reverse...maybe.
Click to expand...
Click to collapse
im not super linux familiar... im learning as i go and reading everything i can about it
thanks for the info :thumbsup:
so you mean
su
mkyaffs /system
or
su
mkyaffs /block/devblock/mmc0blk (i think thats system idk for sure right now tho)
just checked the unyaffs google code page... says it only supports unyaffs right now not making system.img's.....
but theres links for a mkyaffs so maybe thatll do it
---checking google site sdk site for info on compiling system.imgs maybe theres a tool included---
NOPE NOTHING!
umm
i have an idea for you man
boot into your environment and then adb shell in and just try it because the whole image that you booted to should be read write
once you boot into your emulator load a sd card file with the mksdcard commands
http://developer.android.com/guide/developing/tools/othertools.html#mksdcard
then your gunna get your adb and
adb push cyanogen1.4recovery.img /sdcard
adb shell
$ su
# flash_image recovery /sdcard/cyanogen1.4recovery.img
#reboot recovery
and see if itll do it that way if it boots into recovery with the custom recovery.img sweet action your good to go grab your ADB window and
adb push (your custom rom).zip /sdcard
adb shell
#reboot recovery
then select choose update.zip to flash and choose your custom rom and in theory it should flash it to your Readwrite system.img........
someone anyone correct me if im wrong cuz im gunna have to try this when i get home
THIS IS ALL IN THEORY I HAVE NOT TESTED NOR DO I KNOW IF THIS WILL WORK JUST AN IDEA FOR YA
Zarboz said:
im not super linux familiar... im learning as i go and reading everything i can about it
thanks for the info :thumbsup:
so you mean
su
mkyaffs /system
or
su
mkyaffs /block/devblock/mmc0blk (i think thats system idk for sure right now tho)
just checked the unyaffs google code page... says it only supports unyaffs right now not making system.img's.....
but theres links for a mkyaffs so maybe thatll do it
---checking google site sdk site for info on compiling system.imgs maybe theres a tool included---
NOPE NOTHING!
umm
i have an idea for you man
boot into your environment and then adb shell in and just try it because the whole image that you booted to should be read write
once you boot into your emulator load a sd card file with the mksdcard commands
http://developer.android.com/guide/developing/tools/othertools.html#mksdcard
then your gunna get your adb and
adb push cyanogen1.4recovery.img /sdcard
adb shell
$ su
# flash_image recovery /sdcard/cyanogen1.4recovery.img
#reboot recovery
and see if itll do it that way if it boots into recovery with the custom recovery.img sweet action your good to go grab your ADB window and
adb push (your custom rom).zip /sdcard
adb shell
#reboot recovery
then select choose update.zip to flash and choose your custom rom and in theory it should flash it to your Readwrite system.img........
someone anyone correct me if im wrong cuz im gunna have to try this when i get home
THIS IS ALL IN THEORY I HAVE NOT TESTED NOR DO I KNOW IF THIS WILL WORK JUST AN IDEA FOR YA
Click to expand...
Click to collapse
I tried before, but emulator freezes when I try to reboot it. I think can install Cyanogenmod and the CMUpdater and use my own update.zip to do the update, but I think it will not work.
realjumy said:
I tried before, but emulator freezes when I try to reboot it. I think can install Cyanogenmod and the CMUpdater and use my own update.zip to do the update, but I think it will not work.
Click to expand...
Click to collapse
it doesnt work you have to nandroid the update.zip
i was up till like 4 am last night trying to compile a tattoo build and i kept getting stuck on flash at my update script where it CHMOD CHOWN system:xbin
toooo tired to care to mess with it anymore...
tried everything to get the emulator to boot my custom rom but no go
tried doing it like
emulator -sysdir c:\c\herosysimage\ -avd hero
and like
emulator -system C:\c\herosysimage\system.img -avd hero
no boot
also tried putting system.img in the avd folder
I have compiled this guide from the other one posted on this forum, the discussion therein, and my own knowledge. If you have any suggestions on making it better or to correct any mistakes I may have made please let me know.
This guide is intended for Windows and includes detailed instructions. It will cover the steps necessary to root, flash the new recovery image, create a full backup. This will work with software versions 1.29.651.1 and 1.56.651.2 (aka Android 1.5). If you have updated to 2.1 please following this guide here. I am not responsible for any damage done to your phone using this guide. Root at your own risk.
I have put to together a video on YouTube for you to follow along as well. The version numbers of certain files are now outdated in the video so change file names as necessary.
If you own a non-Sprint Hero, you will need to do some extra steps. Follow the guide in the How to Root Non-Sprint CDMA Hero thread.
Step 1: Download the Android SDK from http://developer.android.com/sdk/index.html The Windows file is called android-sdk_r06-windows.zip. Extract the files to your C: drive so that you now have the folder C:\android-sdk-windows
Step 2: Download the asroot2 exploit file from http://forum.xda-developers.com/attachment.php?attachmentid=244212&d=1257621154 Extract asroot2.zip to C:\android-sdk-windows\tools folder.
Step 3: Download the Hero recovery image from http://forum.xda-developers.com/showpost.php?p=4898505&postcount=1g Place this file in C:\android-sdk-windows\tools as well.
Step 4: Make sure USB Debugging is off by going to Settings>Applications>Development. Now connect the phone to your PC via USB cable.
Step 5: Mount your sdcard; Browse to the HTC Sync folder and install HTC Sync on your pc. After it is done installing unmount the sdcard then enable your USB debugging.
Step 6: Open a command prompt by clicking the Start button and typing cmd into the search box and pressing enter or found under All Programs>Accessories.
Step 7: You will now enter a series of commands which I will place inside code boxes to indicate the entire command. You may copy and then paste them into the command prompt window by right clicking. Only enter one command at a time.
1:
Code:
cd C:\android-sdk-windows\tools
2:
Code:
adb devices
If you've been following this guide you will see your phone's serial number. If you get "device not found" error, you either need to make sure you the drivers were properly installed or make sure you enable USB debugging AFTER you connect the USB cable. Continue on once you get the proper phone serial output.
3:
Code:
adb push asroot2 /data/local/
4:
Code:
adb shell
5:
Code:
chmod 0755 /data/local/asroot2
6:
Code:
/data/local/asroot2 /system/bin/sh
You should see an output that says:
$ /data/local/asroot2 /system/bin/sh
[+] Using newer pope_inode_info layout
Opening: /proc/857/fd/3
SUCCESS: Enjoy the shell.
#Now for a few last commands.
7:
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
8:
Code:
cd /system/bin
9:
Code:
cat sh > su
10:
Code:
chmod 4755 su
You are now officially rooted. A few more steps and you will have flashed the recovery image.
11:
Code:
exit
12:
Code:
exit
13:
Code:
adb push recovery-RA-heroc-v1.6.2.img /sdcard
Pushing is equivalent of copy the file to the root of your sdcard. By the time you finished reading this it should be done. You'll know its done because the ouput will say something like transferred X bytes in X secs.
14:
Code:
adb shell reboot
This will cause the phone to restart automatically. Wait till it is fully booted to continue.
15:
Code:
adb shell
16:
Code:
su
17:
Code:
cd /sdcard/
18:
Code:
flash_image recovery recovery-RA-heroc-v1.6.2.img
FLASHING TO THE RECOVERY TAKES SEVERAL SECONDS-- BE PATIENT. ENTER THE NEXT COMMAND ONLY AFTER THE COMMAND PROMPT RETURNS TO THE # (ROOT SYMBOL).
19:
Code:
reboot recovery
Step 8: This is the last command; you may now close the cmd prompt. This will cause your phone to boot into recovery mode; it should take no longer than 30 secs. The third option on the list is "- Backup/Restore"; select it. Now, select the first option "- Nand backup". The phone will prompt you to press HOME to confirm which is want you want to do. The backup will begin. You will see the screen say, "Performing backup : .........." When done, the bottom of the screen will say "Backup complete!" and you will be given the menu options again. Go back to the main menu and select reboot system. Rebooting your phone after installing the new recovery image may take several minutes.
Step 9: Once your phone is fully booted, mount the sdcard. You will see a folder called "nandroid"; I highly recommend you copy this to your pc in case you lose your sdcard data or reformat it. Your phone is rooted, 100% backed up, and ready to install a custom rom if you wish!
wow dude,
instructions worked great on Win7
i was able to download the missing usb_drivers by running SDK Setup in C:\android-sdk-windows, and selecting the usb driver from the available packages. I was unable to download the index for the SDK Setup program until I enabled "force http://" in the settings menu.
had to copy over asroot again after i ran SDK Setup (that program deleted it from the directory)
your instructions worked like a charm. total time spent rooting this thing after finding your post: 18 minutes.
(you might want to add a line there in the "mount and copy over the zip file step" to backup the nandroid folder from your SDCard to your comp just as a backup of your stock phone image)
anyway.. cheers!
izanagi said:
wow dude,
i'm about to follow these instructions. thank's for the precise list!
(btw, about to try it on Win7.. may have to change some folder pathing but we'll see)
okay.. typo on the first command in parentheses, and I'm missing the usb_drivers folder (do you have it / can sent it to me) so am unable to install the device in win7.
Click to expand...
Click to collapse
Heh, thanks for the misspell heads up. I did my rooting from Win7 pc; it automatically installed correct drivers for me. To check go to the Control Panel>View devices and printers. You see one device named "Android Phone". Otherwise as far as Ive heard installing HTC Sync installs proper drivers.
izanagi said:
*** edit had to copy over asroot again after i ran SDK Setup (that program deleted it from the directory)
**** edit: all done.. your instructions worked like a charm. total time spent rooting this thing after finding your post: 18 minutes.
(you might want to add a line there in the "mount and copy over the zip file step" to backup the nandroid folder from your SDCard to your comp just as a backup of your stock phone image)
anyway.. cheers!
Click to expand...
Click to collapse
Thank you for taking the time help make my guide better. I'm very glad to know there are little to no hiccups.
When I do step 5, instead of:
5. "/data/local/asroot2 /system/bin/sh"
You should see an output that says:
$ /data/local/asroot2 /system/bin/sh
[+] Using newer pope_inode_info layout
Opening: /proc/857/fd/3
SUCCESS: Enjoy the shell.
#
I get:
[1] Killed /data/local/asroot2 /system/bin/sh
Any suggestions? Should I just be quiet until there is an Eris specific way to do this?
When I do step 5, instead of:
5. "/data/local/asroot2 /system/bin/sh"
You should see an output that says:
$ /data/local/asroot2 /system/bin/sh
[+] Using newer pope_inode_info layout
Opening: /proc/857/fd/3
SUCCESS: Enjoy the shell.
#
I get:
[1] Killed /data/local/asroot2 /system/bin/sh
Any suggestions? Should I just be quiet until there is an Eris specific way to do this?
detox702 said:
When I do step 5, instead of:
5. "/data/local/asroot2 /system/bin/sh"
You should see an output that says:
$ /data/local/asroot2 /system/bin/sh
[+] Using newer pope_inode_info layout
Opening: /proc/857/fd/3
SUCCESS: Enjoy the shell.
#
I get:
[1] Killed /data/local/asroot2 /system/bin/sh
Any suggestions? Should I just be quiet until there is an Eris specific way to do this?
Click to expand...
Click to collapse
This guide is for the CDMA Hero not the Eris!
When I go to apply the rom I get an white screen with skateboarding androids on the bottom and the prompt to erase data yes/no. I press the home key and the Hero reboots without asking to "Apply sdcard:choose zip". This is done from the boot menu. Does the rom load automatically? Did I do something wrong? I got root with no problem. A tip; to make it easier and to avoid spelling mistakes copy and paste the rooting commands from the instructions. Made it go faster too. Thanks in advance.
Never mind. I held down Home and Power at
the same time instead of Home THEN power! ARRGH! Loading up now as I type. Sorry.
ELIMINATED said:
When I go to apply the rom I get an white screen with skateboarding androids on the bottom and the prompt to erase data yes/no.
I press the home key and the Hero reboots without asking to "Apply sdcard:choose zip".This is done from the boot menu.
Does the rom load automatically? Did I do something wrong? I got root with no problem.
A tip; to make it easier and to avoid spelling mistakes copy and paste the rooting commands from the instructions. Made it go faster too. Thanks in advance.
Click to expand...
Click to collapse
yuck... break up your sentences, that's alot of crap to throw on someone all at once... and the bold doesn't help it any.
check to see if you have the custom recovery installed....
-turn off phone
-hold vol down + power
-should search for some stuff then give three options
-press "home" to enter recovery image
do you see "!" and a phone.... does it just hang or do you see a green/yellow menu?
At the end of his post he says he figured it out. He wasn't holding down home key
None of this is working for me at all... I'm not sure what I'm doing wrong, but every time I enter ANY of the commands into the prompt all I get is "cannot find the path specified".
For reference, i have done everything in this guide to the letter, everything is downloaded, unzipped to the correct location, USB drivers installed, etc etc. Not sure what's wrong.
EDIT: I figured it out.. user error, awesome. Worked great, thanks for this!
awesomeindeed said:
None of this is working for me at all... I'm not sure what I'm doing wrong, but every time I enter ANY of the commands into the prompt all I get is "cannot find the path specified".
For reference, i have done everything in this guide to the letter, everything is downloaded, unzipped to the correct location, USB drivers installed, etc etc. Not sure what's wrong.
EDIT: I figured it out.. user error, awesome. Worked great, thanks for this!
Click to expand...
Click to collapse
"cd C:\android-sdk-windows\tools" is actually "cd C:\android-sdk_r3-windows\tools"
is that where you are stuck?
thank you TS. I've been lurking xda for a couple years now when i had the mogul and tp. First time on an android device. Thank you for your time in helping me.
someone buy this man a drink!!!
Invaluable piece of work right here, helped me get it done in no time at all....real clear concise and very helpful....REQUEST THIS BE A STICKY!!!!!
fenske09 said:
"cd C:\android-sdk-windows\tools" is actually "cd C:\android-sdk_r3-windows\tools"
is that where you are stuck?
Click to expand...
Click to collapse
That was the name of the zip file not the extracted folder.
Please help, I followed all of your instructions, I received no errors however I can't boot the recovery image. I checked and it is in the sd card, but every time it just hangs at the HTC logo
I downloaded a terminal emulator and typed su and it gave me # so I assuming I am rooted?!
newtodroid said:
Please help, I followed all of your instructions, I received no errors however I can't boot the recovery image. I checked and it is in the sd card, but every time it just hangs at the HTC logo
I downloaded a terminal emulator and typed su and it gave me # so I assuming I am rooted?!
Click to expand...
Click to collapse
Redownload the recovery image and reflash it. The one you're using probably became corrupt during DL or something.
theresthatguy said:
Redownload the recovery image and reflash it. The one you're using probably became corrupt during DL or something.
Click to expand...
Click to collapse
also make sure you have the heroc version there's a hero and heroC, i messed that up once and had similar results
new ROM
So i loaded the custom ROM, and i followed all the istructions as listed on this guide. When i rebooted my phone, a bunch of my apps started Force Closing on startup.
did i miss something, or do something wrong?
if i reinstall them on the new ROM will they work right?
thanks for any insight
kristaps said:
So i loaded the custom ROM, and i followed all the istructions as listed on this guide. When i rebooted my phone, a bunch of my apps started Force Closing on startup.
did i miss something, or do something wrong?
if i reinstall them on the new ROM will they work right?
thanks for any insight
Click to expand...
Click to collapse
you converted your sd card to fat32,ext2,swap and now the apps are looking for the program on your sd card,
turn off your phone
take out sd card
turn on phone
uninstall app
turn off phone
put in sd card
turn on phone
reinstall app
this should fix you
I take no credit whatsoever for obtaining root or anything development related.
I simply took BCNice20's instructions and added more detail for less experienced users. In fact I copied most of this directly from his thread and added more detail.
I take absolutely no responsibility for your phone if you brick it, if it melts, if it sleeps with your wife, or if it burns your house down.
Proceed at your own risk.
If you need to get started with the SDK and ADB start here
Step 1
Temp root your device using Visionary or Z4 (I prefer Visionary)
If you are already temp rooted skip this step
Step 2
Download the file linked at this address http://www.thebcblends.com/shift/Shift-root.zip
Extract the contents to the root of your SD card.
If you are having trouble extracting download 7-Zip
Once installed connect your phone to your computer as a disk drive
right click on the shift-root.zip, select extract here, then use the dropdown to locate your device, more specifically your SD card
Once you have extracted the file to the root of your sd card change your connection type back to charge only
Step 3
If you have followed my other thread you already have adb working
Open the cmd prompt and paste the following
Code:
cd C:\AndroidSDK\platform-tools
hit enter
type
Code:
adb shell
hit enter
you will see this
Code:
$
no type
Code:
su
hit enter
Superuser will prompt you to click allow on your phone. Click it quickly to allow permissions!
Now you will see
Code:
#
you have root permissions.
Step 4
Verifying md5sum
Make sure you copy and paste this exactly
Code:
md5sum /sdcard/Shift/hboot_orig.bin
then hit enter
Your result should look like this 386c19451e8dd18f9b98fad6b11be4c0 hboot_orig.bin make sure the numbers match. You may have some extra path in front of hboot_orig.bin.
Next copy and paste this exactly
Code:
md5sum /sdcard/Shift/hboot_eng.nb0
then hit enter
Your result should look like this 60ec1006e6ec2e8acb370d6aad35b17e hboot_eng.nb0 make sure the numbers match. You may have some extra path in front of hboot_eng.nbo.
If these do not match do not proceed. Delete the file placed on the root of your sd card and repeat step 2 and redownload.
Step 5
Now we're going to flash the eng spl. This is where the unpleasant things can happen.
Make sure you are in adb shell with superuser(root) permission. This was explained in Step 3.
If you are not in adb shell with root permissions then do not proceed. Do not pass go, do not collect $200.
Now DO NOT REBOOT until you are instructed to do so!!
Now paste this exactly into cmd prompt
Code:
dd if=/sdcard/Shift/hboot_eng.nb0 of=/dev/block/mmcblk0p18
and hit enter
You have flashed the eng spl. Now we will make sure it flashed properly.
Step 6
Check the md5 of new flash hboot and restore if necessary
run this command to pull the newly flashed hboot to your sdcard
type
Code:
dd if=/dev/block/mmcblk0p18 of=/sdcard/Shift/hboot_check.nb0
in the command prompt and hit enter
now we check the md5 to see if it matches
Enter
Code:
md5sum /sdcard/Shift/hboot_check.nb0
in the command prompt and hit enter
it should read 60ec1006e6ec2e8acb370d6aad35b17e
if the md5sum matches then congratulations its safe to reboot!! you can skip the next bit and continue on to step 7
if you absolutely cannot get the eng hboot to flash right then run this to restore the stock hboot
Type
Code:
dd if=/sdcard/Shift/hboot_orig.bin of=/dev/block/mmcblk0p18
in the command prompt and hit enter
then pull it to check md5
Type
Code:
dd if=/dev/block/mmcblk0p18 of=/sdcard/Shift/hboot_check1.bin
in the command prompt and hit enter
then check the md5sum
Type
Code:
md5sum /sdcard/Shift/hboot_check1.bin
in the cmd prompt then hit enter
it should read 386c19451e8dd18f9b98fad6b11be4c0
if it doesnt keep trying until it does but DO NOT!! reboot till it matches
Step 7
check hboot and perm root!!
ok now reboot your phone into bootloader
turn off phone and hold power+vol down till it boots into bootloader
look at the top and make sure it says s off
if so reboot the phone back into android
put the phone into airplane mode
Go to setting, applications, manage applications and uninstall superuser
Next temp root with visionary
after you are temp rooted then attempt to perm root with visionary
your phone will reboot and you are now officially perm rooted any changes you make will now stick on reboot
**Edit Recovery Added**
Download ROM Manager from the Market. (Pay for the donate version!)
Open ROM Manger and install recovery.
Im having problems on the CMD prompt. On the command line Im getting C:\users\Dizidi> instead of C:\>. Did I miss a step somewhere?
dizidi said:
Im having problems on the CMD prompt. On the command line Im getting C:\users\Dizidi> instead of C:\>. Did I miss a step somewhere?
Click to expand...
Click to collapse
Nope, that's sounds right.
Next you'll want to
Code:
cd C:\AndroidSDK\platform-tools
dizidi said:
Im having problems on the CMD prompt. On the command line Im getting C:\users\Dizidi> instead of C:\>. Did I miss a step somewhere?
Click to expand...
Click to collapse
You may want to learn some basic DOS commands first. See:
http://www.lsi.upc.edu/~robert/teaching/foninf/doshelp.html#chdir
dizidi said:
Im having problems on the CMD prompt. On the command line Im getting C:\users\Dizidi> instead of C:\>. Did I miss a step somewhere?
Click to expand...
Click to collapse
Type cd\ to get to the c:
The command prompt just started out in your user directory. You can just do the cd\Android......... stuff. Using cd\ it doesn't matter which directory you're in when you start.
Sent from my HTC EVO Shift 4G using XDA App.
Im such a noob, thanks guys. forgot to type in "cd".
Good Job typing this up!
Although I have rooted many phones before through adb it is helpful to see it wrighting in simple English
Thought I'd add that I needed to download an app like BusyBox in order to get md5sum to work.
Getting a lot of PM's for help so I'm bumping this back to page one
Any quick instructions for the 2nd part of that post, installing recovery?
tcd2004 said:
Any quick instructions for the 2nd part of that post, installing recovery?
Click to expand...
Click to collapse
First follow BCNice's instructions for backing up your Wimax Keys. You need to be in adb shell, then paste and enter. That easy!
After that place this file on the root of your sd card.
Disconnect from the computer then power down your shift.
Enter the bootloader by pressing power and volume down. The bootloader should recognize the zip and flash it automatically. Select yes to reboot when prompted.
Connect to your computer and remove the zip from your sd card.
If you want to verify your recovery is now working power down and turn back on by pressing power and holding the volume down button. You should now be looking at Clockwork Recovery.
BrandoKC said:
Enter the bootloader by pressing power and volume down. The bootloader should recognize the zip and flash it automatically. Select yes to reboot when prompted.
Click to expand...
Click to collapse
I'm not sure why, but I cannot for the life of me get this to work.
SD Checking...
Loading PG06IMG.zip
No Image!
idaed said:
I'm not sure why, but I cannot for the life of me get this to work.
SD Checking...
Loading PG06IMG.zip
No Image!
Click to expand...
Click to collapse
Delete the file off of your SD card and follow the instructions included in the Wiki Just download the fastboot file linked in the wiki and put it in the same folder you put adb in.
Thank for this guide!!!!!!!!!!!!!!!
I am now rooted . Thank you BrandoKC. I know you copied the instructions from bcnice20 ( Thank you bcnice20), but you dumbed it down enough for me to get brave. I'm a total noob to Android. It was a bit nerve racking, but I got it on the first shot. Thanks to everyone. Now it's time to OC my Shift .
Is there a video guide to root my shift?
HTC Evo Shift 4G
Thans for the more detailed guide! I'm now permarooted in under an hour
Sent from my PG06100 using XDA App
for some reason.. whenever I do temp root with visionary or z4... It says its rooting.. then my phone "restarts" does the sprint 4g slaph screen and gets stuck on the big 4G logo...
I ran visionary when I first got the shift(temp root to run titanium backup) but now it's not working. anyone know why?
Uninstall superuser, reboot, rerun Visionary
Sent from my PG06100 using XDA Premium App
BrandoKC said:
Uninstall superuser, reboot, rerun Visionary
Sent from my PG06100 using XDA Premium App
Click to expand...
Click to collapse
ah, gotcha. will try thanks.
Hi,
I have the HTC Inspire 4g with:
Software #: 3.20.502.52 710RD
Android Version 2.3.5
HTC Sense 3.0
Baseband version: 12.69a.60.29u_26.17.14.11_M
I have unlocked the bootloader using htcdev and have successfully rooted the the device but i'm still S-ON. I have tried installing some custom ROMs however after flashing the device did not boot. I understand that I have to flash the boot.img file located in the .zip file of the custome ROM. That I know how to do... My concern is that I want to try out some ROMs but as a precaution I would like to have the stock RUU file for the type device I have should I need to restore it.
I did create a backup of my ROM and have used it previously to restore the phone after installing the custom roms that haven't boot. I just want to know if I flash the boot.img file will a restore bring it back to where it was before the flash or do i need the RUU file to restore stock?
If the later please advice where I can find that particular file as I've searched but can't seem to find the one to use.
Thanks a million.
360fifa
360fifa said:
Hi,
I have the HTC Inspire 4g with:
Software #: 3.20.502.52 710RD
Android Version 2.3.5
HTC Sense 3.0
Baseband version: 12.69a.60.29u_26.17.14.11_M
I have unlocked the bootloader using htcdev and have successfully rooted the the device but i'm still S-ON. I have tried installing some custom ROMs however after flashing the device did not boot. I understand that I have to flash the boot.img file located in the .zip file of the custome ROM. That I know how to do... My concern is that I want to try out some ROMs but as a precaution I would like to have the stock RUU file for the type device I have should I need to restore it.
I did create a backup of my ROM and have used it previously to restore the phone after installing the custom roms that haven't boot. I just want to know if I flash the boot.img file will a restore bring it back to where it was before the flash or do i need the RUU file to restore stock?
If the later please advice where I can find that particular file as I've searched but can't seem to find the one to use.
Thanks a million.
360fifa
Click to expand...
Click to collapse
RUU 3.20.502.52
Thank you kindly for taking the time to respond and also help.
Hi Gizmoe,
is there a rooted and s-off RUU file I could use as well?
Thanks again..
360fifa said:
Hi Gizmoe,
is there a rooted and s-off RUU file I could use as well?
Thanks again..
Click to expand...
Click to collapse
RUU 's can not be modified. You will not lose s off however by running an ruu. After you run ruu just pd98img a recovery and flash away.
Gizmoe said:
RUU 's can not be modified. You will not lose s off however by running an ruu. After you run ruu just pd98img a recovery and flash away.
Click to expand...
Click to collapse
So are you saying that I would need to unlock the bootloader again then following the same steps I have now? I had the impression based off could threads I've read that there's a way to root the device while gaining S-OFF that will allow me to avoid having to manually flash the boot.IMG everytime i install a custom rom. If there's a thread I can read or a guide to follow please provide a link so that I can proceed. Oh, does all the pd98img file the same?
Thanks again.
360fifa
360fifa said:
So are you saying that I would need to unlock the bootloader again then following the same steps I have now? I had the impression based off could threads I've read that there's a way to root the device while gaining S-OFF that will allow me to avoid having to manually flash the boot.IMG everytime i install a custom rom. If there's a thread I can read or a guide to follow please provide a link so that I can proceed. Oh, does all the pd98img file the same?
Thanks again.
360fifa
Click to expand...
Click to collapse
Yeah that's right. Your not s off. Well here is the only method left for the inspire. It may be a bit intimidating but really isn't that hard. Here is link.
http://tau.shadowchild.nl/attn1/?cat=6
Gizmoe said:
Yeah that's right. Your not s off. Well here is the only method left for the inspire. It may be a bit intimidating but really isn't that hard. Here is link.
Click to expand...
Click to collapse
Your're right very intimidating, however I'm willing to try my only concern is what is dd highlighted below "High Level Steps (some detail deliberately NOT included)
htc dev unlock, install cwm recovery and root ONLY
dd the stock boot image to /data/local/tmp and pull it to your pc HD (/dev/block/mmcblk0p22 is boot)
adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img"?
Also i navigated to the folder on my device however it doesn't show any boot.img file. Just a init.rc file. Could you explain just this part of it please?
Thanks again,
360fifa
360fifa said:
Your're right very intimidating, however I'm willing to try my only concern is what is dd highlighted below "High Level Steps (some detail deliberately NOT included)
htc dev unlock, install cwm recovery and root ONLY
dd the stock boot image to /data/local/tmp and pull it to your pc HD (/dev/block/mmcblk0p22 is boot)
adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img"?
Also i navigated to the folder on my device however it doesn't show any boot.img file. Just a init.rc file. Could you explain just this part of it please?
Thanks again,
360fifa
Click to expand...
Click to collapse
DD is copy and convert. It will copy boot files and convert it into boot.img. Use adb shell to do it as shell works within phone directories. Then pull it from pc using adb pull. He is giving you the exact adb commands to do both.
Code:
adb shell
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img
Gizmoe said:
DD is copy and convert. It will copy boot files and convert it into boot.img. Use adb shell to do it as shell works within phone directories. Then pull it from pc using adb pull. He is giving you the exact adb commands to do both.
Code:
adb shell
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img
Click to expand...
Click to collapse
Lol... I figured those were the commands to use, was just wondering what dd stand for.. ( copy and convert ). So let me see if i understand whats happening in the code.
So firstly I need to have the the HTC drivers installed and have the Android SDK on the root of c drive. Basically the same folder used when I unlocked to bootloader. In that folder I have the adb files, should I also add the files listed in the zip file he provided? If so let me explain the code, if no please shed some light.
So adb shell starts the emulator with the device
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot will copy and convert the mmcblk0p22 file if it is found in the /dev/block folder on the device and place it to the /data/local/tmp/ folder and call it boot.img
adb pull /data/local/tmp/boot.img I'm thinking that the computer is going to pull the boot.IMG file from the /data/local/tmp folder however where is it putting it? In the same folder that I started the command prompt from? That is the Android folder on my c drive?
360fifa said:
Lol... I figured those were the commands to use, was just wondering what dd stand for.. ( copy and convert ). So let me see if i understand whats happening in the code.
So firstly I need to have the the HTC drivers installed and have the Android SDK on the root of c drive. Basically the same folder used when I unlocked to bootloader. In that folder I have the adb files, should I also add the files listed in the zip file he provided? If so let me explain the code, if no please shed some light.
So adb shell starts the emulator with the device
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot will copy and convert the mmcblk0p22 file if it is found in the /dev/block folder on the device and place it to the /data/local/tmp/ folder and call it boot.img
adb pull /data/local/tmp/boot.img I'm thinking that the computer is going to pull the boot.IMG file from the /data/local/tmp folder however where is it putting it? In the same folder that I started the command prompt from? That is the Android folder on my c drive?
Click to expand...
Click to collapse
You will want to work out of the platform-tools directory.
Yes adb pull will always pull to your working directory unless another path is specified. Adb shell will need root. So if you type adb shell and don't see a # sign type su to get it. When done in adb shell you will need exit so you can pull to computer. If you had to take two steps to get a # prompt then you will type exit twice.
Gizmoe said:
You will want to work out of the platform-tools directory.
Yes adb pull will always pull to your working directory unless another path is specified. Adb shell will need root. So if you type adb shell and don't see a # sign type su to get it. When done in adb shell you will need exit so you can pull to computer. If you had to take two steps to get a # prompt then you will type exit twice.
Click to expand...
Click to collapse
Kool, thats the directory i'm referring to... I'm sure i'm already rooted. But your saying that when i send the command "adb shell" if I don't see the # sign then i should type su. Are you then saying that if I had to type su twice then I need to hit exit twice to pull to pc?
Oh before I forget should i run ruu before attempting this or remain as is? Also, do I need cmw recovery installed or can i remain on twrp 2.6.0.0?
Thanks again bro..
360fifa
360fifa said:
Kool, thats the directory i'm referring to... I'm sure i'm already rooted. But your saying that when i send the command "adb shell" if I don't see the # sign then i should type su. Are you then saying that if I had to type su twice then I need to hit exit twice to pull to pc?
Oh before I forget should i run ruu or remain as is?
Thanks again bro..
360fifa
Click to expand...
Click to collapse
Yes you would need to type su to see #. Adb shell root access works independently of phone root. It needs root access over adb which without an UN-secure boot img will need the su command. Exit for each level. Once for su and once for shell itself. You want to exit until you are back at Windows directory. Adb shell is at the phones root directory. The dd command is moving files within the phone, while Adb pull would be used to copy from phone to pc. I would not run that ruu if you are going to try and s off. I would run 2.47.502.7. Which I posted a link in the att stock Rom thread.
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
http://forum.xda-developers.com/showthread.php?p=50027824
Gizmoe said:
Yes you would need to type su to see #. Adb shell root access works independently of phone root. It needs root access over adb which without an UN-secure boot img will need the su command. Exit for each level. Once for su and once for shell itself. You want to exit until you are back at Windows directory. Adb shell is at the phones root directory. The dd command is moving files within the phone, while Adb pull would be used to copy from phone to pc. I would not run that ruu if you are going to try and s off. I would run 2.47.502.7. Which I posted a link in the att stock Rom thread.
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
http://forum.xda-developers.com/showthread.php?p=50027824
Click to expand...
Click to collapse
Do i need to run a ruu or can I proceed as is? If so u recommend running the 2.47.502.7 ruu before going thru the adb commands, y?
Thanks again..
360fifa said:
Do i need to run a ruu or can I proceed as is? If so u recommend running the 2.47.502.7 ruu before going thru the adb commands, y?
Thanks again..
Click to expand...
Click to collapse
Yes go ahead and proceed as is. You should not have any issues. If not successful then try ruu. You may not be able to run the older ruu if your bootloader is newer. Which in that case just run the newer one. I beleive I used this process on a phone with the newer software but the older works for sure.
Gizmoe said:
Yes go ahead and proceed as is. You should not have any issues. If not successful then try ruu. You may not be able to run the older ruu if your bootloader is newer. Which in that case just run the newer one. I beleive I used this process on a phone with the newer software but the older works for sure.
Click to expand...
Click to collapse
Gizmoe you have been very patient and very helpful i thank you a million times. If i encounter any other issues I'll definitely let you know.
Thanks again..
360fifa
360fifa said:
Gizmoe you have been very patient and very helpful i thank you a million times. If i encounter any other issues I'll definitely let you know.
Thanks again..
360fifa
Click to expand...
Click to collapse
I encountered an issue while trying to pull the boot.img file from /data/local/tmp/. The command used was adb pull /data/local/tmp/boot.img I then got a msg saying the adb is not a command, if I remove the adb and send the command with just pull it says pull is not a command.
If I exit su "#" it brings me to $ and if I send the command again it says that I don't have permission. Can you advise what I might be doing wrong? Oh, I got the mmcblk0p22 file to copy and convert into the boot.img file. I was able to see it using ES File explorer on my phone.
Do I need to go in fastboot usb, does unknown sources need to be checked?
Thanks again.
360fifa said:
I encountered an issue while trying to pull the boot.img file from /data/local/tmp/. The command used was adb pull /data/local/tmp/boot.img I then got a msg saying the adb is not a command, if I remove the adb and send the command with just pull it says pull is not a command.
If I exit su "#" it brings me to $ and if I send the command again it says that I don't have permission. Can you advise what I might be doing wrong? Oh, I got the mmcblk0p22 file to copy and convert into the boot.img file. I was able to see it using ES File explorer on my phone.
Do I need to go in fastboot usb, does unknown sources need to be checked?
Thanks again.
Click to expand...
Click to collapse
You need to exit one more time so you can see c prompt with your platform tools folder. Your still in shell therefore still in phone and not actually pulling to your pc. Only the pc uses Adb commands so you have to be at your platform tools folder. If you restart your phone temp empties too so if you can't see boot img anymore that's why.
Gizmoe said:
You need to exit one more time so you can see c prompt with your platform tools folder. Your still in shell therefore still in phone and not actually pulling to your pc. Only the pc uses Adb commands so you have to be at your platform tools folder. If you restart your phone temp empties too so if you can't see boot img anymore that's why.
Click to expand...
Click to collapse
Okay.. I am going to try that now, I swore I did that as well but lets see.
360fifa said:
Okay.. I am going to try that now, I swore I did that as well but lets see.
Click to expand...
Click to collapse
Here's what it said "failed to copy '/data/local/tmp/boot.img' to ' ./boot.img': Permission denied