i just tried to use noviiremote...
before (with original htc magician rom) i using noviiremote without any problems to control my LG lcdtv (with proper codebase, ofcourse)
now with new cotulla's 3.06 rom, i can install noviiremote ( i install latest v4.2 version! ) and everything seems ok... noviiremote report no problems..
but when i try to control my LG lcdtv, i find that IR not work as before... actually IR work but only from <1m distance...
before i can send command from 1-2m..
looks like IR now have lower power or something similar..
if it's controled by software, i like to know how to change IR led power, and get higher working distance
so??
Related
I have installed the navman, and also the mouse with towa's patch, but gps will not bond with my mdaII, I have the updated rom T-mobile germ update. Everything works fine on my IPAQ 3870
So what iam i doing wrong
Is it asking for a passcode? If so, the password for the Navman is NAVMAN. To enter the password you will also need to download the following file: http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip This enable you to use characters. If you also set both comm ports to 4, all should work. Thats how mine is set up and it works ok.
Its not the password
Its not the password, i can set that with Towas patch,
How can i set both com ports to 4 as they are shaded out?
Lummac, I think there is more than one version of bthtools, I use 1012, when you configure the bluetooth on this it gives pictures of activesync, modem, headset, com ports etc etc, the other version gives only com ports, the 1012 is much better and much easier. Before installing make sure all previous bonds are removed.
Were to get 1012
So were can I download that bt tool 1012, By the way i had already tried everything without any other blue toot devise bonded.
So I just have to keep trying
Lummac, can you take the file by email. its only 62k
I suppose that it is not against the rules that I post the one that I downloaded.
forgot to say, this is Towas patch, forgot which version, found on
http://www.angeltowns.com
it is version 1.0.0.5 and here I attach the latest version 1.0.1.2
That latest one is the best.
downloaded patch
To which serieler com port do i set the navman
Ps great patch
Received official patch from/for NAVMAN
Yesterday I received the 'official patch' from NAVMAN for the bluetooth problem with the 4400 and the MDA2/XDA2
and gues wath. the patch they send me are the bluetooth fix 1012 and Towas patch. and a nice note which referes to this developers forum.
I gues and know that you quys here are the best. the benchmark for the rest of the world.
And I am very happy to be a part of it
Keep up the work quys
PS I haven't tried the patch as i am traveling (yes, without my navman) but witll try it over the weekend
Hi All,
Excellent forum, been watching for a while now as original XDA owner. XDA is now defunct after many months happy service (Save the provider!!) - Really didn't do enough with it!
Firstly, got my XDAII and took it out wrapper - Played..
Now time for the serious stuff:
1. Ran BluetoothGPS - Fantastic, why can we not see more of this type of app on XDA? However, ran into a couple of problems:
- Setup all connections (LAN, serial, etc) and seemed to work fine with laptop with BT Dongle (TDK Class 2 & latest driver set)
- Replaced \windows\startup BTTray shortcut with new one for BTGPS, soft reset....
Yet still both systray icons come up......
And Activesync won't work through the defined serial port....
I'd really like to start using BluetoothGPS, but I need Activesync to work... I need the other functionality i.e. LAN etc which the current MS BT stack doesn't!!
Is there a way to completely remove the MS BT Stack and make BTGPS the only stack? Is it a regedit or a ROM cook that needs to be done?
Has anyone done this? Hows it working......
Oh, I bought a stowaway keyboard too... (Required for the size)... and O2 bundled their o2-g2 headset for nowt.....
Here is the problem:
Once you install BluetoothGPS, it will totally override all the MS Bluetooth services; meaning, no more Activesync or SSA; I think headset still works though.
Also, you cannot use the Activesync or SSA that is provided by the hacked software (or at least mine didn't work).
Please someone, find a fix. This is an awesome stack!
HI all,
I'm requesting if you anyone knows a free WEBCAM software where it can turn the KAISER into a webcam that can be used in Live messenger or skype etc......... I've searched on the internet but they aren't working on WM6, so i'm asking for help
Thanks!
J
I know that you stated you were looking for a 'free' solution and sadly I do not believe one exists. However, you can check out a non-freeware program called Webcamera Plus from Ateksoft. I'm sure it would work on the Kaiser.
It does work. I set up my Kaiser (Dutty's Touch ROM version 3.0) connected via USB to my OQO 02 (XP Pro Tablet) and used Skype. I only get about 4 frames per second. I don't know if it's the software or maybe the cable I'm using is USB 1.1. Both the front and back camera's work (finally, a use for the front camera in the USA!). My front camera seems to have a weird angle to get a full face shot. Sort of up and to the right. The resolution, as expected, is better on the back camera.
I guess I'll go through the struggle of setting up a bluetooth activesynch to see how that works...
any success would like to know how well it works before I buy it.
Gosh, with the bad video driver on the Kaiser, i would bet the results would suck big time............the reason i'm asking if the kaiser can do webcaming is because i'm on a 64-bit OS system and its hard to get webcams to work with correct drivers on my 64-bit windows xp....I'm hoping that if this works, then i can use it as webcam.....
I have Webcamera plus version 2 and it works great, I get 10-15 fps over wifi. no need of cables.
I am getting 1~2fps over the USB cable, any ideas why it could be so slow?, on the phone the pciture is far smoother, but on the PC is very slow
-Mods, delete please -
Long time reader, less time poster so don't NOOBIFY me please. Thanks.
OK. I've flashed several roms, enjoying frying my Wizard into something new for the past year and a half. Nuff said bout that...we are all there if we are on this board.
I actually had it BT-AS working on my MDA with one of the roms, forgot which one unfortunately. I never had problems with the WIDCOMM/BROADCOMM stack on my old AXIM wth WM2003SE with activesync profile but I guess that is the difference with Broadcom and the cruddy Microsoft Stack.
My favorite ROM is the OCTAIVOI 6.0 so far. I tried out the bluetooth activesync and it will NEVER give me an activesync profile, just the serial port profile.
The MDA also seems to only have ports 6 and 7 open for bluetooth purposes.
Now I have tried registry hacks from other postings and other fixes that seem to work only with previous activesync 4.2. I USE 4.5. I know Microsoft jacked with it for some dubious security reason (which is irrelevant to home users...only enterprise users)
Anyway. Has someone got this thing to work? I love my ROM but am willing to ditch it for something that has a properly functioning connection thru AS and BT.
Thanks.
(some seem to have tried to port the Bluetooth stack from x50-51 from Dell over to wizard..has that worked out?)
too many questions...again..don't kill the "noob" poster.
Thanks
gfourner_austintxmda said:
Long time reader, less time poster so don't NOOBIFY me please. Thanks.
OK. I've flashed several roms, enjoying frying my Wizard into something new for the past year and a half. Nuff said bout that...we are all there if we are on this board.
I actually had it BT-AS working on my MDA with one of the roms, forgot which one unfortunately. I never had problems with the WIDCOMM/BROADCOMM stack on my old AXIM wth WM2003SE with activesync profile but I guess that is the difference with Broadcom and the cruddy Microsoft Stack.
My favorite ROM is the OCTAIVOI 6.0 so far. I tried out the bluetooth activesync and it will NEVER give me an activesync profile, just the serial port profile.
The MDA also seems to only have ports 6 and 7 open for bluetooth purposes.
Now I have tried registry hacks from other postings and other fixes that seem to work only with previous activesync 4.2. I USE 4.5. I know Microsoft jacked with it for some dubious security reason (which is irrelevant to home users...only enterprise users)
Anyway. Has someone got this thing to work? I love my ROM but am willing to ditch it for something that has a properly functioning connection thru AS and BT.
Thanks.
(some seem to have tried to port the Bluetooth stack from x50-51 from Dell over to wizard..has that worked out?)
too many questions...again..don't kill the "noob" poster.
Thanks
Click to expand...
Click to collapse
Did you flash your carrier rom before flashing 6.0
In 5.9 it did not work for me, but in 6.0, bluetooth active sync works for me.
Great advice on flashing carrier ROM first.
This is something I usually do and when jumping from one OCTAIVOI to another, I skipped the step.
Giving it a go and will report back.
Thanks for your patience and kind answer.
I hope this works..as trying to uninstall activesync 4.5 and putting 4.2 was fruitless. WM6 says I have to use 4.5 when I guess I remember my old WM5 roms allowing 4.2.
Lets get flashing.
Reflashing with 2.26 ROM then WM6 doesn't solve BT-AS Prob
I tried the advice given above, normally excellent catchall to fix a lot of problems. This time, it unfortunately is stuck on the *&*& serial port option with no option for Activesync again.
To see how it used to work in original T-Mobile 2.26 WWE, I reflashed it and it worked beautifully. Ok, so I wasn't nuts for remembering that it worked in WM 5.0. However, putting Octaivoi 6.0 on it or several other ROMS in the last few months does not allow proper BT connectivity in using Activesync.
TNT, Blackdiamond, NBD (Where are U Zoki?) are some of the ROMS I remember having problems with also. It could be that you got it to work? Chime in.
I am going to go back to an INgeNetics type rom from original Wizard wm6.0 ports and see if they work.
I love the features on .1908, .1921, 1933,.1938 type roms but this is ridiculous to not work. Maybe I'll try that .1948 on I just saw on the boards.
ANYBODY have more input on this. SOMEBODY else tell me that they are having this problem...EVEN BETTER...FOUND A SOLUTION.
sorry for shouting...about to toss my MDA in the toilet over this.
(blasphemy)
Note also, i followed some adive that was given to me in 5.9 that didn't work. But did in 6.0
Remove all paring before flashing to 6.0
Remove all bluetooth settings also in rom.
Flash
Re-pair
Mine worked on my Wizard.
Hope that may provide some incite.
Am I the only one who is having Bluetooth-Activesync Problems?
Rocoafz-thanks for all your input. You seem to be the only one who is not apathetic to this issue. I've seen your other posts on other threads and I know you went through a lot of what I am going through now. Thanks for understanding.
ROCOAFZ said:
Note also, i followed some adive that was given to me in 5.9 that didn't work. But did in 6.0
Remove all paring before flashing to 6.0
Remove all bluetooth settings also in rom.
Flash
Re-pair
Mine worked on my Wizard.
Hope that may provide some incite.
Click to expand...
Click to collapse
Tried this and unfortunately all I still get is the serial port option and no opportunity to do both incoming and outgoing com ports like you can in basic windows mobile 5.0 "T-Mobile 2.26" rom or in Button 1.05 rom.
Hell I started fresh. Uninstalled my Dell Bluetooth (widcomm stack) from laptop, uninstalled Activesync 4.5...so no more pairings at all.
Fresh flashed the carrier rom.
Installed fresh WM6 ROM.
Result.
Same nonsense. Different day....oh well.
In WM5 I have no problem connecting but nothing seems to be working.
I am wondering if a bluetooth stack can be corrupted from all the flashing or is each flash a true clean wipe that gives you a fresh start. Is there something residual from another ROM or registry hack that is screwing with this? Just curious.
APPRECIATION To any forum member with solutions or attempted solutions.
It just sucks to not have this function as my laptop seems to OVERHEAT when I am USB connected for Activesync.
G
gfourner_austintxmda said:
.
Hell I started fresh. Uninstalled my Dell Bluetooth (widcomm stack) from laptop, uninstalled Activesync 4.5...so no more pairings at all.
G
Click to expand...
Click to collapse
Of course, I reinstalled them before reflashing. LOL.
Check these threads...
http://help.lockergnome.com/general/Activesync-Port-Availability-Bluetooth-ftopict26563.html
Some of these worked for people
Possible Answers and a Question
To answer your question: XDA Mobile v5 (of mfazzz) does have a working ActiveSync via BT - I used it. However, it has another problem: files don't sync no matter how you connect (wi-fi or cable).
NTS's ROMs also sync via BT.
Octaivoi is a nice ROM though - I'm using it myself now and am quite happy with it. It would be nice to crack this bug...
If you do have the ability to add ports in the BT menu, it should be doable - that's how I did it with other ROMs.
I'm not sure I understand your post completely though: do you or do you not have an option under BT to add ports? I'm asking since I don't - that's what is preventing me from getting ActiveSync run via BT.
I'll still stick with Octaivoi though (at least, for now) - I like this ROM. And, perhaps we (or somebody else) will figure out how to do it.
gfourner_austintxmda said:
I actually had it BT-AS working on my MDA with one of the roms, forgot which one unfortunately. I never had problems with the WIDCOMM/BROADCOMM stack on my old AXIM wth WM2003SE with activesync profile but I guess that is the difference with Broadcom and the cruddy Microsoft Stack.
My favorite ROM is the OCTAIVOI 6.0 so far. I tried out the bluetooth activesync and it will NEVER give me an activesync profile, just the serial port profile.
The MDA also seems to only have ports 6 and 7 open for bluetooth purposes.
Now I have tried registry hacks from other postings and other fixes that seem to work only with previous activesync 4.2. I USE 4.5. I know Microsoft jacked with it for some dubious security reason (which is irrelevant to home users...only enterprise users)
Anyway. Has someone got this thing to work? I love my ROM but am willing to ditch it for something that has a properly functioning connection thru AS and BT.
Thanks.
(some seem to have tried to port the Bluetooth stack from x50-51 from Dell over to wizard..has that worked out?)
too many questions...again..don't kill the "noob" poster.
Thanks
Click to expand...
Click to collapse
BT active Sync
For i have tried allmost every WM6 rom available on this board
but only TNT rom's have working Active sync via Bluetooth
You could try this procedure too (at least I will have a feedback if it's working for somebody else too )
http://forum.xda-developers.com/showthread.php?t=363144
Thanks for the new round of input on BT-AS issues.
Each bit of new information provides us with a solution eventually.
I have been deleting COM ports on my laptop that were blocking my use of COM3 and COM5 etc.
Figured out how to kill them finally and recreate bare COM ports for use by whatever USB or BT device I wanted.
Only snag now is I must have killed my entire internal BT adapter for my Dell laptop...thats another story.
I'll try to put in my Kensington BT USB dongle and try from scratch.
I think I am getting somewhere.
Should be able to add ports again from the Wizard side, usually 6 and 7.
Found another program, not shareware called VSPB..virtual serial Port builder. It may or may not help with this Serial Port problem.
Greg
Hello, I have a Qtek 8300 (SP5m Tornado), which has its earpiece broken, so it is not useful anymore as a phone. However, the camera, processor, USB port and wifi are OK.
I was thinking on a possible reuse of it as a wireless IP Camera: just a USB power supply, and the phone transmits via wifi to the wifi router, the images from the camera. I was looking for a software to do this, and the closest is Ateksoft Webcamera plus, but it is not what I need, because it needs a PC with a client software.
Any ideas on how to do this ?
Or any ideas on how to reuse my Tornado for a different application ?
Thank you!
Yes, its possible. I'll try to power up my SDAII and I'll tell you the software you need. They have a limited trial but works cool. I'll post back as soon as I can get mine working. I believe last time I powered it up I had a white screen.
How can you break the earpiece?!
I guess it is just dirt on the connector between PBA and earpiece - open it up and get that cleaned
Regarding the WebCam: the only tool is "WebCamPlus" by Ateksoft:
http://www.ateksoft.com/webcamplus.html
You cannot do it without a PC driver as a webcam.
Still you can use the camera to take photos, but quality is so poor - would not do that.
Other use of the device:
load a WM6+ ROM with SDHC card support and use it as music player, it has a really good audio quality - PocketPlayer preferred!
use it as GPS logger with a BT mouse, it will log a whole day (8 hours) and only eat < 20% battery capacity