Database Info

WHAT HAPPENED TO ALL THE KITCHENS? WHERE CAN I FIND ROMS??

Recently, I needed ROMs but non of the kitchens I know work. Can you please give me to links of any kitchens you know.
Thank You in advance for your attention!

http://lumpistefan.dyndns.org/

thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?

batvanio said:
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
Click to expand...
Click to collapse
What for a ROM you´re trying to cook? Which application included? How much free space in the ROM?
Which Autoconfiguration?
Stefan

If you are cooking a 2002 rom make sure you leave some space.

LumpiStefan said:
batvanio said:
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
Click to expand...
Click to collapse
What for a ROM you´re trying to cook? Which application included? How much free space in the ROM?
Which Autoconfiguration?
Stefan
Click to expand...
Click to collapse
Lumpi , First of all thanks for your Kitchen and ur hard work..
but the last time I was cooking a rom (last week) T mobile Rom 4.01.00 with the Windows Mobile Boot screen image and the 4.01.16 with the o2 Boot screen those images didn't show up I got instead T-mobile bootscreen.
At the end the Rom what's important to me but still there should be some fix for that, Thank you again for the Kitchen I hope to see soon the WM2003 SE in it hopefully.

I was trying to cook the rom 3.17.03 ENG O2-Euro.
the gauge for the free space was about 300k left after configuring the software of the rom.

batvanio said:
I was trying to cook the rom 3.17.03 ENG O2-Euro.
the gauge for the free space was about 300k left after configuring the software of the rom.
Click to expand...
Click to collapse
Ok. I made an hint, that with the XDA-Developers Autoconfig you have to let about 450kB free for cooking. I'm sorry, that i can't change this. Then it should work. The error of the missing config files will still be there. This is more work for me. But it should only concern the german autoconfiguration...
HTH
Stefan

LumpiStefan
I had a lot of problems cooking ROMs because the languages are in other languages:
In Pocket PC kitchen I cooked 3.17.03 ENG O2-Euro, which as mentioned in its name should be in English, but it turned out to be in French!
In the Pocket PC 2003 kitchen I cooked 4.01.00 ENG beta which also should be in English but is in German.
Is there something I am not setting up correctly?

Re: LumpiStefan
batvanio said:
I had a lot of problems cooking ROMs because the languages are in other languages:
In Pocket PC kitchen I cooked 3.17.03 ENG O2-Euro, which as mentioned in its name should be in English, but it turned out to be in French!
In the Pocket PC 2003 kitchen I cooked 4.01.00 ENG beta which also should be in English but is in German.
Is there something I am not setting up correctly?
Click to expand...
Click to collapse
I'm sorry, but i can't believe this. Have you tried to look at the log after cooking the rom? There is an output of the BAse Rom you cooked.
Many Users are using the kitchen, but i never heard of this problem. Which browser are you using?
Stefan

My brawser is IE 6.0.2800
It is very strange because i tried not only once but several times cooking both roms and upgrading them to the phone, but with the same result.
Very very strange...

batvanio said:
Very very strange...
Click to expand...
Click to collapse
This is true. Tried it now for myself, but all was working fine.
Used same browser version, and all worked fine....
:shock:
I'm sorry, but it looks like I can't help you.
Stefan

What can i do now?
I cannot remove the French ROM. When I am trying to upgrade it with another ROM it says Unsupported language 'FRA'.
Can you suggest how i might fix this.
P.S. - the ROM i want to backup to is in the *.exe format

I think, you have to use adapt rom, or flash your device using an SD-Card. Therefor you have to extract the exe-File with winzip, and copy the NK.nbf file via xdatools to an SD-Card.
There are many threads about this..
Stefan

I managed to do it successfully. Thank you very much for your help!
I also would like to ask you if there is a way to install programs from your kitchen without burning a ROM, that is if I can somehow install them to my phone on its present ROM.
Thank YOU in advance for Your help!

was wondering if we could use the rom kitchen for xda2?

The Hobbit said:
was wondering if we could use the rom kitchen for xda2?
Click to expand...
Click to collapse
Kitchen should also work for XDA2 ROMS. But in the moment, there are only XDA1 Roms in it. Also you normally don't have the nessesary of doing this since the XDA2 has enough space.....
Stefan

is there a way to install programs from your kitchen without burning a ROM, that is if I can somehow install them to my phone on its present ROM.
Thank YOU in advance for Your help!

well some programs you can download and install in your ram but rom can only be writen to when you flash the rom and you can only flash the whole rom at once

but can i download the programs from the kitchen, the one which you customize for the rom, and how can i install them to my current rom

New ROM COOKER--Over here (Now FARIA's RK)

Hi,
Its good to share with prophet users the following thread from wizard forum.
Dont think it will not work for prophet, iv done it on aku 3.3 (read thread)
Well i want we should come forward ( do it at ur own risk) to this and
share the experience here in this thread.
http://forum.xda-developers.com/showthread.php?t=297027
Here is latest Faria's Rom Kithen with WM6
that seems to be lil advanced and automated
read me in pdf View attachment 37884
All newbee dont do anything if ur not awrae of basics

hi,
can i use the os.nb and the Upgrade_rom.bat from Aserg's update ?
with my neo. i like to add some spezial tools.
cu
inteks

hiho,
i need some space and i dont use Windows Live, can i delete all WLM..... Files in the Dump Folder without consequences ??
are there other files that can be deleted ?
thx ia
inteks

inteks said:
hi,
can i use the os.nb and the Upgrade_rom.bat from Aserg's update ?
with my neo. i like to add some spezial tools.
cu
inteks
Click to expand...
Click to collapse
U can do it with, but first u have to repack OS.nb to nk.nbf
no need of Upgrade_rom.bat
first Try some basic steps like extracting/rebuilding without any change.
thanx
nandlal

hi,
i allready buid and flashed my own rom with success.
i copied the os.nb to the romdump folder and renamed it to 80040000-OS.nb
then i execute DUMP_ROM.
then i add and remove some files and build it with BUILD_ROM.
then i copyed the 80040000-OS.nb back to the ASERG folder as os.nb
and then i flashed it.
but i run quickly out of space. the question is witch files can safety deleted ?
/inteks

How can I solve the following error: ¨unable to open source image 80040000-OS.nb¨. Im trying to dump the smart1 wm6 rom for htc prophet.

I get the same error message! That's really anoying ...! -.-

animelover said:
I get the same error message! That's really anoying ...! -.-
Click to expand...
Click to collapse
Have u repacked 80040000-OS.nb into nk.nbf ?
I think no.
please follow correct procedure explained in readme.

iamthebug said:
How can I solve the following error: ¨unable to open source image 80040000-OS.nb¨. Im trying to dump the smart1 wm6 rom for htc prophet.
Click to expand...
Click to collapse
For ROM Prophet, when U run DUMP_ROM it extract file 80040000-OS_0.nb insteed of 80040000-OS.nb. You can edit this file name in DUMP_ROM.bat file
Goodluck.

nandlal_mk said:
Hi,
Its good to share with prophet users the following thread from wizard forum.
Dont think it will not work for prophet, iv done it on aku 3.3 (read thread)
Well i want we should come forward ( do it at ur own risk) to this and
share the experience here in this thread.
http://forum.xda-developers.com/showthread.php?t=297027
All newbee dont do anything if ur not awrae of basics
thanx
nandlal
Click to expand...
Click to collapse
Hello Nandlal,
I want to cook Traditional Chinese WM6 rom, do you know where can I find the rom source? Tks.

scott4 said:
Hello Nandlal,
I want to cook Traditional Chinese WM6 rom, do you know where can I find the rom source? Tks.
Click to expand...
Click to collapse
see ur PM, iv sent some thing to u

nandlal_mk said:
see ur PM, iv sent some thing to u
Click to expand...
Click to collapse
Hello Nandlal,
Thanks for you reply.
When I have a list of files of extension rom, how can I make it to a
9b000000-Extension.nb file?
Do I need to use Winimage tool? Or what tool should I use?
Thanks.

scott4 said:
Hello Nandlal,
Thanks for you reply.
When I have a list of files of extension rom, how can I make it to a
9b000000-Extension.nb file?
Do I need to use Winimage tool? Or what tool should I use?
Thanks.
Click to expand...
Click to collapse
yes u have to use winimage

Wow, this kitchen is extremely easy to use. Cheers to the maker.
I experimented with Aserg Os.nb and Smart1 Os.nb, edited them and flashed the roms.
Is it possible to cook a Wm6 Rom using the RUU, and flashing from the bootloader instead of the standby mode used in Smart1 rom.

Hello Nandlal,
I would like to cook Spanish WM6 rom (or at least to try it).
Please, do you know where can I find the rom source? Tks.

zeusin said:
Wow, this kitchen is extremely easy to use. Cheers to the maker.
I experimented with Aserg Os.nb and Smart1 Os.nb, edited them and flashed the roms.
Is it possible to cook a Wm6 Rom using the RUU, and flashing from the bootloader instead of the standby mode used in Smart1 rom.
Click to expand...
Click to collapse
well i think its ur typing mistake but RUU is for flashing not 4 cooking.
As 4 as i 'v experienced, i could not succeed with any cooked aku higher than 2.2 which results in successful boot of device even flashing always succeed with standard RUU.
and beside that same cooked Roms easily flashed with pdocwrite method
(standby mode) and device booted well in every case, even with faria's wizard Rom
So i think RUU workes flawless with shiped Roms (or better u say 'OS')
and with any other component IPL/SPL/LOGO/Splash/Extrom.
For cooked Roms ( OS) u have to rely on pdocwrite
(please correct me seniors if im wrong)

Dapso said:
Hello Nandlal,
I would like to cook Spanish WM6 rom (or at least to try it).
Please, do you know where can I find the rom source? Tks.
Click to expand...
Click to collapse
sorry i dont have any source for any spanish Rom

nandlal_mk said:
well i think its ur typing mistake but RUU is for flashing not 4 cooking.
So i think RUU workes flawless with shiped Roms (or better u say 'OS')
and with any other component IPL/SPL/LOGO/Splash/Extrom.
For cooked Roms ( OS) u have to rely on pdocwrite
(please correct me seniors if im wrong)
Click to expand...
Click to collapse
Thanks Nandlal. Yea i realized that for cooked roms, pdocwrite is the way. RUU just made the flashing look easier
thx for your advice

I always take the WM6 ROMs and make an RUU install image of it and I have had no problems at all. The only issue is when the ExtROM is in the form of files and not an image. (The you must use the PDOC utils, which means you must be at AKU 2.2 first)
nandlal_mk said:
well i think its ur typing mistake but RUU is for flashing not 4 cooking.
As 4 as i 'v experienced, i could not succeed with any cooked aku higher than 2.2 which results in successful boot of device even flashing always succeed with standard RUU.
and beside that same cooked Roms easily flashed with pdocwrite method
(standby mode) and device booted well in every case, even with faria's wizard Rom
So i think RUU workes flawless with shiped Roms (or better u say 'OS')
and with any other component IPL/SPL/LOGO/Splash/Extrom.
For cooked Roms ( OS) u have to rely on pdocwrite
(please correct me seniors if im wrong)
Click to expand...
Click to collapse

flykthewiz said:
I always take the WM6 ROMs and make an RUU install image of it and I have had no problems at all. The only issue is when the ExtROM is in the form of files and not an image. (The you must use the PDOC utils, which means you must be at AKU 2.2 first)
Click to expand...
Click to collapse
might be , but me n my device r not lucky
Edit: BTW, what is device type G4 or G3 and which RUU r u using, G3/G4 compatible or NVID or Wizards?
I alwasy use G4 RUU.

Q: How can i work with kitchen thing ? need totarial ?! whats nk.nbf or OEM ?

can some one tell me how can i work with kitchen things ?
im not pro user so i dont know what is nk.nbf or what is OEM package ...
how they work and how can i make them work ?!

manuelcalavera said:
can some one tell me how can i work with kitchen things ?
im not pro user so i dont know what is nk.nbf or what is OEM package ...
how they work and how can i make them work ?!
Click to expand...
Click to collapse
Everyone of them has a readme!!! If you look in my sig below, you will find the one that was done for the Faria kitchen!

if at this point, you have absolutely no idea what anything is, you should NOT be building a ROM yet. you need to read up on it it first. Go to Molski.biz and go to the How To's. This will give you a good explanation of the tools that are used and the things that go into it. Good luck.
-Nstefanelli-

check my sig

[KIT] [Samsung SGH-i617] 02/17/2009 - nhathoa WM6.1 Kitchen

Hi guys,
If you want to make your own Rom for your i617, just follow these steps:
1. Get these runtimes and install on your PC (Windows XP): vcredist_x86.exe and NetCF 2.0
2. Get the the kitchen: [SamSung i617] kitchen, then extract to any where you want.
3. Get the original AT&T WM6.1 for i617 (only OS part), then put into BaseBin folder in the kitchen: The original Rom AT&T WM6.1 for i617 only OS file (pda.bin)
4. Now let you start to make the kitchen work:
- Run Dump [pda.bin].cmd then wait to complete.
- Get the file: initflashfiles.dat, then put into OEM\OEM_Lang_0409
Done. Now you can cook anything you like, after cooking, just run Build [pda.bin].cmd to rebuild the new Rom (in RomUpdate folder).
There is a guide to update Rom in the Attatchment.
But note that:
- Maybe some of PCs have some problems (cause virus or any reason), it can't show full hidden files. Just install fresh Windows XP again to fix it.
- To port the newer version of build, let you have to learn Here
And the last, I did sell my SamSung i617 to change a new toy
Sorry for my bad English.
Good luck.

Thanks for the kitchen, downloading now

Update clean Rom. See attachment at post #1.

i600
I wonder if this will genuinly work on i600!
It looks nice.......i wish i could have WM6.1 on my device :-D

^^rac said:
I wonder if this will genuinly work on i600!
It looks nice.......i wish i could have WM6.1 on my device :-D
Click to expand...
Click to collapse
Just download my kitchen. Get your "pda.bin" (the pda.bin of i600 ship Rom), then place into BaseBin folder, Dump it, build/cook...

error unpacking
@nhathoa
i get an error unpacking your kitchen...
part 4 has an error in file g´reloc.exe or something like that...
is there any problem?
and btw: how can i get my pda.bin? do i need to dump my rom?
thanks for your help!
regards
chuckbert

Please try to download part 4 agian.
what is your device?

device
i reloaded part4 already 2 times... error stays...
but i found a file called greloc.exe inside... is this the one needed?
i have a german i600... it´s german though it has a qwerty instead of a qwertz keyboard.
regards
chuckbert

chuckbert said:
i reloaded part4 already 2 times... error stays...
but i found a file called greloc.exe inside... is this the one needed?
i have a german i600... it´s german though it has a qwerty instead of a qwertz keyboard.
regards
chuckbert
Click to expand...
Click to collapse
Let me try with i600 on my kitchen. But I haven't got i600 device.
More:
I did try with i600.
My kitchen work fine with samsung i600 .

Nhathoa,
Can you upload your i600 WM6.1 image somewhere? I tried to cook it but didn't work (yet). It would really mean a lot if you can upload a working rom.
Thanks!

daxy said:
Nhathoa,
Can you upload your i600 WM6.1 image somewhere? I tried to cook it but didn't work (yet). It would really mean a lot if you can upload a working rom.
Thanks!
Click to expand...
Click to collapse
Sorry, I have no i600 device, so I can't make/test WM6.1 for i600.

nhathoa said:
Sorry, I have no i600 device, so I can't make/test WM6.1 for i600.
Click to expand...
Click to collapse
There was someone willing to use his device to test WM 6.1 ROM. I dunno how cooking etc works, but it would be awesome, if someone can try to bring this to i600
Good work nhathoa!
Hopefulle someone can try to cook a succesfull i600 WM 6.1 ROM!

i dont recommend using greloc in i607.. as for i600 it might be the same.. the problem is when you use greloc, the camera software will malfunction

ejoya said:
i dont recommend using greloc in i607.. as for i600 it might be the same.. the problem is when you use greloc, the camera software will malfunction
Click to expand...
Click to collapse
Exactlly. The g'reloc.exe can't relocate resover module, but if you skip g'reloc and edit some module, device not boot. Thanks for your report.
More: Did you port build 20282 from ROSE? I did port full XIP and SYS, Free Ram on boot is 83Mb, but low speed, not smooth.

resover is not needed..
porting htc sys should be ok.. but its too much trouble if you want a perfect stable rom

Does anyone upgrade my clean Rom? Is there something wrong?

Hi!i dont understand how i can install the rom on a i600..how can i cook a rom for my i600??"BaseBin\pda.bin" where i can find it?

I CANT BRING THE GPS WORK WITH UR CLEAN ROM,ROLL BACK 2 ORIGIN NOW..
THX FOR UR TOOLS, HOPE FOR UR NEW ROM NOW.

I have tried the kitchen, and dump is ok.But it makes some errors when building . I tried to only run buildos, but failed!
It seems that an older version could run correctly, which I used in a X51v kitchen. So does it need some other files? like .net 3.0 or 3.5. I just installed a 2.0 version

laronz said:
I have tried the kitchen, and dump is ok.But it makes some errors when building . I tried to only run buildos, but failed!
It seems that an older version could run correctly, which I used in a X51v kitchen. So does it need some other files? like .net 3.0 or 3.5. I just installed a 2.0 version
Click to expand...
Click to collapse
What error did you get?

WM English

Sorry guys but it take me half hour am I gest can not find the last windows mobile English for my diamond2.I have basic version and I want to change it becouse iGO is so stubborn it don't want to install a new version it giv me a error like "Do you want do downgade the old vercion?" and if you can giv me the link with iGO 8 also I will be werry hapy.
Sorry,sorry but I can not find them...
plz help.
THNX!

denisprygulea said:
Sorry guys but it take me half hour am I gest can not find the last windows mobile English for my diamond2.I have basic version and I want to change it becouse iGO is so stubborn it don't want to install a new version it giv me a error like "Do you want do downgade the old vercion?" and if you can giv me the link with iGO 8 also I will be werry hapy.
Sorry,sorry but I can not find them...
plz help.
THNX!
Click to expand...
Click to collapse
Go here and download any WWE version that you found newer. They're original shipped ROMs for topaz, if you want cooked ROMs (which they are including latest WM builds, updated packages, tweaked settings, etc.) you can find them easily at the Topaz ROM Development forum, go and find your flavored ROM: http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=&f=486

TAEL said:
Go here and download any WWE version that you found newer. They're original shipped ROMs for topaz, if you want cooked ROMs (which they are including latest WM builds, updated packages, tweaked settings, etc.) you can find them easily at the Topaz ROM Development forum, go and find your flavored ROM: http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=&f=486
Click to expand...
Click to collapse
MAn thnx! I gest install WM in ny phone but I have the same problem with iGO.
Any one know where can I get igo or amigo for diamon2.
pease!

denisprygulea said:
MAn thnx! I gest install WM in ny phone but I have the same problem with iGO.
Any one know where can I get igo or amigo for diamon2.
pease!
Click to expand...
Click to collapse
Your iGo issue is not ROM related.
It's because you have different versions on your SD card.

Bruce Inman said:
Your iGo issue is not ROM related.
It's because you have different versions on your SD card.
Click to expand...
Click to collapse
I put AmiGO in it but it giv me the 480x800 resolution skin not found.
Any one know how to fix that?
THNX!

denisprygulea said:
I put AmiGO in it but it giv me the 480x800 resolution skin not found.
Any one know how to fix that?
THNX!
Click to expand...
Click to collapse
I had a similar issue on an older device and had to completely remove all iGo files, then just put back the newest ones because I had so many different builds that it was conflicting with everything.
Make sure you install from 2577 folder on root of SD card and put all resource files into iGo folder on root of SD card.
Also check your Sys.txt for errors.