Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try
Rudegar said:
many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try
Click to expand...
Click to collapse
Tried that but no luck. I think this is not what i mean. I would like to turn this exe into a CAB and the key included. So when i install the Cab i don't have to register.
one would think the program maker took precautions to make that impossible otherwise your cab could be distributed as a pretty easy free version
you can try to single out what files it depend
on and make a cab file from cratchs
and if the exe or dll files got alter when the serial was given
that cab would be reg'd
otherwise you would have to find out what registries was altered in the
serial process and make a reg which which did those alterations
and get the cab file to run it
Most installations that require you to install through activesync end up leaving a cab file behind. Check Program Files\Activesync\SPB... for the cab file. If it is not there restart the installation but after you have executed the setup file leave it alone and search for the cab file again. I hope this is what you were looking for
ALL exe that install via activesync have a cab, some are hidden in the profiles temporary files, some auto-delete once installed, so leave the application hanging in the install and do a search for recent files and sort by date/time (remember to allow it to scan hidden and system folders). a lot go into the activesync directory, some go into program files, i have even found some that go into the internet explorer temp files, install, and then delete themselves. The most common hiding place is your computers profile temp folder --- typically found under
C:\Documents and Settings\PROFILE\Local Settings\Temp
just dig around, its not to difficult once you find the 3 most basic hiding places.
good luck.
Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
You can simply download the CAB files from SPB site directly.
Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.
vprabu said:
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.
Click to expand...
Click to collapse
Thank you, this did the trick for me. Installed en included the registration.
Welcome. I am happy that I could be of some help
vprabu said:
Welcome. I am happy that I could be of some help
Click to expand...
Click to collapse
Now i have everything in registered Cab-files on my SD-card. Now i can make the switch to WM6. I'm dutch and have a P3300 and i guess it will take some time before HTC wil come with a dutch WM6 upgrade, so maybe not the place to ask but do you now where i can find a original English WM6 for the P3300?
I need serious help, I can not get the HTouchFlo program to install on my Apache 6700 with WM6 on it. I have installed the files, but im not able to install the program. I tapped on the .exe file on my phone and the file with the source of the program comes up, it does not execute and install. All other files have nothing to associate itself with. What am I doing wrong? I don't have any other program of the sort on my phone. Can someone please help this newbie get this program to work. I would greatly appreciate the help.
first of all any file said .exe will not install if it is on ur phone. only .cab files will install.
u need FTouchFlo_v1.4.1.CAB
and HTCCube2.cab
to install onto the phone memory not storage card.
You might also need the TouchFLO Settings CAB file.
I had a program that would let me install .cab files through activesync, the same way we install .exe files
You just draged the cab file on the program, and it would start loading it to the ppc, and a instal popup on the ppc appeared.
I think it was called windowsCE.exe, or something like that, but I cant find it now.
It's called WinCE CAB installer
lol, I was close, anyways, here it is if anyone else is looking for it
http://www.mediafire.com/?0l8lpuolzji
[B]Hello all! i ve got an Htc tytn2. can u plz tell me in detail how to install cab files and Home 2
Thank you all[/B]
Install cab files is quite straightforward. Once you have copied it to your device, you use your file manager to find it. Then you double click to 'open' the file. It will start the installation form then onwards. The same goes for Home2, it also comes as a cab file. Customizing Home2 is something different, but have a look at comunity.pointui.com where you'll find all the answers.
i've tried all the 10.000 methods in all of the other "how to cab from exe", but none of them seemed to work, now im just curious if maybe its not possible in the type of exe that im installing. What im trying to get the cab of is the medical programs from skyscape. When installing from my computer, it asks for some stuff, like if i agree with the terms etc. etc., and the it also asks what kind of install i want to do.. i select "Trail" and then it proceeds on installing it to my device.. but i cant get the cab anywhere!
does any of you deal with those skyscape files? or otherwise if any of you is interested/bored to give it a try, www.skyscape.com, download any file as a test-drive (trail) and install it as a trail also.. it would help me a lot since im gonna be traveling and i dont drag my computer along all the time, and i want to be able to install my programs in case of i reset my phone.
Thanks, much appreciated!
Could try this Universal Extractor
If you install with ActiveSync, it stores the .cab files that its extracting from the .exe file. So while you're running the executable file, installing the software, go to C:\Users\*YourSySName*\AppData\Roaming\Microsoft\ActiveSync and see if it is there.