Hi everyone,
I see that we have some thread about SPL and radio, but we doesn't have any thread about SPL - radio in agreement
For an example
SPL 1.33.2005 + Radio 2.22.19.26I = NO BRICK
And we can post SPL and Radio here.
IF WE DO FLASH A COUPLE OF SPL AND RADIO IN AGREEMENT IN THE SAME TIME USING FASTBOOT, OUR DEVICE WILL BE NEVER BRICKED.
Related
Hi,
Is it true that once you upgrade a radio version you can't go down to a lower version. I've successfully managed to install version 1.34.405.1_4.1.13.54_03.10.90 from Radio 4.1.13.54_03.10.90 (don't ask why) but my phone still says I have Radio 4.1.13.54_03.10.90.
Thanks
No that is not true. That is the exact same radio version you posted. Some ROM's do not flash a radio. The best bet is to flash a stand alone.
Once you are finished flashing your ROM and happy with your device. Patch SPL using the regular SPL method and then run FLASH from within the SPL folder, this will flash a patched SPL to your device and act as a Soft SPL. From here you can flash any radio and number of times to test the best one.
Hope this helps you out.
I also tried many radio versions before setlling down. Ofcourse you can downgrade it as h4waii said
Thanks for the help.
Is the method given by jockyw2001 Soft SPL because if so that's what I've been using.
Btw, what does SPL stand for?
Thanks
It should be in the Wiki, the uSPL is by jockyw2001 and it is loading a patched SPL from RAM. Flashing the uSPL over the ROM SPL will turn it into a "soft SPL".
SPL stands for Secondary Program Loader
Hi!
My magic is 1.33.0006 (Vodafone Spain) so is a Perfect SPL, I have been reading about the different ROMs and some of them need a different SPL, my question is:
If I rooted my magic (was shipped with version 1.5) and now I have installed the Cyanogen 4.2.13 and the RA Recovery 1.5.2G, Do I need the goldcard to change the SPL and the radio version? or with just entering in the recovery mode is enough?
Thanks in advance,
rex2k1
rex2k1 said:
Hi!
My magic is 1.33.0006 (Vodafone Spain) so is a Perfect SPL, I have been reading about the different ROMs and some of them need a different SPL, my question is:
If I rooted my magic (was shipped with version 1.5) and now I have installed the Cyanogen 4.2.13 and the RA Recovery 1.5.2G, Do I need the goldcard to change the SPL and the radio version? or with just entering in the recovery mode is enough?
Thanks in advance,
rex2k1
Click to expand...
Click to collapse
Yeah. Entering recovery mode is enough
Goldcard method is basically avoid region check (if you will flash official ROM, that isn't for your country). In some times GC may used when flashing .nbh to get rooted.
i still am confused about the PERCECT SPL, which I have (.0006) is this SPL good enough for flashing new ROMs, I completed the 1 Click ROOT with no issue flashed the latest Cyanogen ROM, but I wanna try a HERO rom, its kinda why I got a Android Device. This SPL stuff is actually confusing me, five years for HTC devices I have never had an issue or really been confused on what to do, there is a first time for everything.
If i do need to change my SPL, which should I goto? I would like tjust to leave it alone and contine to FLASH on, cause I've been waiting for weeks to get an Android device and flash awaY!!
THANKXXX
actually I think I found a thread just above this one that answered my question, but if anyone want to confirm the correct idea, thatn that would be cool, but I m gonna go ahead and upgrade to SPL: Engineering SPL 1.33.2010 BUT i would like to be sure thats what i need to do, i would like to keep my NO BRICK record intact
SPL recommended
Hi,
Thank for your answers, I'm thinking to change the SPL but I'm not sure which one use, Is the same Danger SPL and the one posted in the sapphire-port-dream website in google (I can't post urls) as latest? If I flashed this SPL will I be able to install all the ROMs that need different SPL? or is better a Engineering version like Engineering SPL 1.33.2010 (I'm confused about the differences).
My magic is SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0006 (SAPP10000)
CPLD-10
RADIO-2.22.1926I
Also I want to ask, if I flash the new SPL (if the versions above are compatible with my phone), Will I need to re-flash again the Cyanogenmod version (or the ROM that I choose)?
Thanks!
rex2k1
rex2k1 said:
Hi,
Thank for your answers, I'm thinking to change the SPL but I'm not sure which one use, Is the same Danger SPL and the one posted in the sapphire-port-dream website in google (I can't post urls) as latest? If I flashed this SPL will I be able to install all the ROMs that need different SPL? or is better a Engineering version like Engineering SPL 1.33.2010 (I'm confused about the differences).
My magic is SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0006 (SAPP10000)
CPLD-10
RADIO-2.22.1926I
Also I want to ask, if I flash the new SPL (if the versions above are compatible with my phone), Will I need to re-flash again the Cyanogenmod version (or the ROM that I choose)?
Click to expand...
Click to collapse
Mmm... 1.33.2005 (Haykuro Danger SPL) is most popular SPL for 32B-devices
Devs recommend it to flash before flashing their ROMs.
Usually, you don't need to re-flash ROM
I'm at 1.76.0007 Perfected SPL for a long time, and I'm using rogers
I tried to up grade to the rogers mandatory update,
and I could procced.
which means, if some one can mod the rogers rom,
we can up grade to that one!
Can you check the SPL is S-ON or OFF?
We need to solve the S-ON.
S-Off is OK.
Hi, I have a T-mobile 32B with perfect SPL and my friend helped me to install new SPL:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP******)
CPLD-10
RADIO-3.22.20.17
Jun 2 2009,17:27:03
Click to expand...
Click to collapse
Now I have big problem : keyboard map is incorrect and don't have home button (original T-mobile phone don't have search button) and I can't go to recovery. Now I want update to any SPL which support Tmobile phone button correctly and I want have root.
Please help me, I'm trying google it too.
Please help me, please please please
... I thought it was usually bad to have a 3.x radio on a 32B.
Can you still fastboot?
(It's possible he could have clearly flashed the wrong SPL on it)
kbeezie said:
... I thought it was usually bad to have a 3.x radio on a 32B.
Can you still fastboot?
(It's possible he could have clearly flashed the wrong SPL on it)
Click to expand...
Click to collapse
Yes, I can use fastboot and flashed recovery
I don't know why our dev doesn't post SPL with radio, as I know each SPL come with a radio, if you use fastboot flash correct a pair without reboot between flash them, your device never bricked
i thought it was currently not possible to root the.010 perfected spl
be it 1.76.0010 or 1.33.0010
how did you do it
i have a new g1 that has 0010 and would like to root it
You must have a goldcard and you will be able to upgrade to any nbh file for G1. (I have a devphone nbh, I will find it and share)
excellent, thank you
please advise when you have found it
in the magic forum there is a post making a gold card
can i follow those instructions?
my phone
sapphire pvt 32a ship s-on h
hboot-1.33.0009 (sapp10000)
CPLD-12
RADIO-6.35.08.29
sn:HT02SKF00593 I download ruu fireware from htc taiwan site
RUU RUU_Sapphire_ChungHwa_3.03.751.4_R_release_signed_NoDriver.exe
but when i run ruu it says bootloader error
phone : main verion error
sorry my poor english
palm13 said:
my phone
sapphire pvt 32a ship s-on h
hboot-1.33.0009 (sapp10000)
CPLD-12
RADIO-6.35.08.29
sn:HT02SKF00593 I download ruu fireware from htc taiwan site
RUU RUU_Sapphire_ChungHwa_3.03.751.4_R_release_signed_NoDriver.exe
but when i run ruu it says bootloader error
phone : main verion error
sorry my poor english
Click to expand...
Click to collapse
Did you write true? Do you have 1.33.0009? or 1.76.0009 ?
Check this line...
5[Strogino] said:
Did you write true? Do you have 1.33.0009? or 1.76.0009 ?
Check this line...
Click to expand...
Click to collapse
That's happened to me before.. But my own fault for not flashing properly.
5[Strogino] said:
Did you write true? Do you have 1.33.0009? or 1.76.0009 ?
Check this line...
Click to expand...
Click to collapse
thx for your reply
my phone spl now is really 1.33.0009 s-on not 1.76.0009
thx again
i have made goldcard more times but all falied i tried five card but no one word
if you have 6.35 radio and 1.33 SPL with S-ON then you could go to repair shop to exchange phone motherboard.
Or to save some money you could buy new one and sell this one for parts.
Proper way of upgrading to new radio:
- eng SPL 1.33 ( S-OFF )
- radio 6.35
- SPL 1.76
- rom for 6.35
dk75 said:
if you have 6.35 radio and 1.33 SPL with S-ON then you could go to repair shop to exchange phone motherboard.
Or to save some money you could buy new one and sell this one for parts.
Proper way of upgrading to new radio:
- eng SPL 1.33 ( S-OFF )
- radio 6.35
- SPL 1.76
- rom for 6.35
Click to expand...
Click to collapse
oh my god very bad luck to me
no any way to repair my phone ?
palm13 said:
oh my god very bad luck to me
no any way to repair my phone ?
Click to expand...
Click to collapse
Try this. With goldcard...
http://forum.xda-developers.com/showthread.php?t=625108
If it will not help - then you should go to servce
dk75 said:
if you have 6.35 radio and 1.33 SPL with S-ON then you could go to repair shop to exchange phone motherboard.
Or to save some money you could buy new one and sell this one for parts.
Proper way of upgrading to new radio:
- eng SPL 1.33 ( S-OFF )
- radio 6.35
- SPL 1.76
- rom for 6.35
Click to expand...
Click to collapse
i check the original thread in a chinese forum(he posted same thread before). he said he can run fastboot; recovery is dead and even splash1 doesn't show up. i assume, at least, this cannot be defined as brick, right?
the original thread indicates that his phone was SPL 1.76.0007, which is PERFECT and RADIO 6.35.08.29 before. he just directly run the ruu which contains SPL 1.33.0009 in order to downgrade but the phone stuck at flashing radio and then he removed the usb cable. eventually the situation said in this thread came out.
i wish the information i provided can help find out a solution instead of talking about sending the phone to the service.
so there is downgrade RUU?
didn't know
and AFAIK there is no safe method to downgrade Perfect SPL 1.76 - there is solution for old radio/spl but I didn't seen any about 1.76 SPL
As far as I know every where where I've seen instruction about flashing FLASH ROM memory there was a lot of warnings "do not interrupt flashing in the middle!!!", "be shure to not lose power supply durring flashing!!!" with explanation that "you will have electronic junk if that happen" and "only paid service after that".
And that warnigs was for PC motherboards, photo cameras, mp3 players, handhelds, phones, cd/dvd recorders even...
So i don't know if anything could be done.
Maybe goldcard but since there is no working fastboot (since it have S-ON SPL) and phone is not booting then CID must be obtained without phone or if adb is working then follow goldcard tutorial to install ENG SPL.
After installing ENG SPL there will be no problem with flashing new ENG SPL 1.76 for 6.35 radio and flashing ROM for 6.35 with fastboot command at computer.