as the title says ... i got meself a bt headset , and as i see , when the bt device gets disconnected for some reason(i power off(tested) or battery runs out(not tested)) it starts playin music or watever its on loud .
this isnt so bad behavior by itself but if i fall asleep somwhere and it dc's or runs out i dun wanna have every 1 listening to souljaboy ...
all other phones have a mute Tick , u can tick and if u pull the plug , it will mute but u can still use volume control even if its muted to control ur headset , can i do that in wm ?
thanks for ur time/thoughts
Related
Hey Guys,
what I am planing to do is to use my Topaz for navigation on my bike.
Generally it works as I want it to work but I have one problem left. The sound is not as loud as it should be.
What I did so far:
- Install TomTom 7 on my Topaz
- Install a bluetooth headset in my helmet
- Redirect system sound to BT headset via BTA
- Set system volume to max as well as TomTom volume
So far everthing works great but when I am riding my bike its pretty hard to understand anything. So I have to get the sound louder somehow.
The Tool AudioBooster just says "No Headset Connected" when I am trying to start it.
Any idea how I could boost the sound output via BT?
Greetz Topaza
Unzip attachment and copy to your Windows folder overwriting original and your max volume level will be increased.
BTW, this is a common question and solution is readily available with a simple google search. No need to open a new thread for this.
thanks for your reply. The file you provided increases the volume via. the Topaz speaker and via. (cable) headset a lot.
Unfortunately the sound via bluetooth stays the same or is increased a little but i cant recognice a difference...
any other ways?
topaza said:
thanks for your reply. The file you provided increases the volume via. the Topaz speaker and via. (cable) headset a lot.
Unfortunately the sound via bluetooth stays the same or is increased a little but i cant recognice a difference...
any other ways?
Click to expand...
Click to collapse
I don't use BT so I cannot confirm if it increases with this file but opening the .cvs show settings for BT, so I would assume it should increase BT as well.
I have an Extra loud one if you want to try it, however you will need to adjust your speakers to a lower level to avoid distortion.
Please let me know if you notice an increase in BT vol.
still cannot recognize any signifficant change in volume via BT
Thanks for the confirmation.
Personally I think BT allows for too much background noise and your best option would be earbuds to cancel excess noise...
Unless you're on a Harley, then there's no way to hear anything but your motor...
Sorry man...
damn, the idea was so great and everything works perfect except this ****ing BT headset - whose integration into the helmet was hard work btw...
There HAS to be a solution. Still don´t know how but i will get this thing working somehow...
Maybe I have to tune the hardware... a better speaker, a small amp or somewhat ^^
Anyway, if someone has an idea how to boost the sound, please let me know!
I recently bought Sony Ericsson MW600 BT headset and I've been using it for about a day. I can tell you that the sound quality quite good (using my Sennheiser earphones) for a stereo BT headset although audiophiles may disagree
Pairing was child's play.
The good thing about this BT set is that it has a cool OLED screen which displays the song title and also the incoming caller name.
I did not expect it to show caller names though. Thought it was compatible only with Ericsson phones
In all, this BT headset does its job well for my daily commute to office (40 KMS each day)
I will update the battery life of this headset after i use it for a week
Just my thoughts.
Nice found it here for around 45 euros.
Hi
How does it works with playing music does the play/pause controls works as it should?
I have had problems with other bt headsets and player controls.
It works very well with the default Sense player and works with Core Player and S2P too. But when you use Core player or S2P it does not scroll the song title on the OLED screen.
I did not try with other players though. Hope this helps
Lemme know if you need more info here.
Thank you.. I am using Core player so it sounds good. I will probably order one this week.
whenever i pick call using bluetooth , it doesnt work.. the sound comes to nil , and then i have to set it back , i use custom rom cooked room from here only
BT-Headset Sony Ericsson MW600
panzercool said:
I recently bought Sony Ericsson MW600 BT headset and I've been using it for about a day. I can tell you that the sound quality quite good...
Click to expand...
Click to collapse
I can only confirm that this is a really good investment! So easy too use, excellent battery performance and it includes a radio-receiver!
4,5 of 5 stars!
PS: Only thing thats annoying me is the lack of keylock. Because it´s hard to move it when using the "snap-holder", without pushing any button. There are buttons on all sides except the back...
Probably to late...
ganesh81289 said:
whenever i pick call using bluetooth , it doesnt work.. the sound comes to nil , and then i have to set it back , i use custom rom cooked room from here only
Click to expand...
Click to collapse
I little bit late, but... Do a reset of your headset and re-sync it with your phone.
To reset the headset:
1 Make sure the headset is turned off.
2 Press and hold down the power key until the pairing indication appears.
3 Simultaneously press and hold down the power key and the call key until the headset turns off.
Hope it helps!
hi everyone ... im new here .. i have a i9003 with a big problem .. the brightness won't change even when i move the selection ... i tried the reset and the flashing .. so im really sure it's a hardware issue .... and also the sound with the ear jack is strange .. not normal .. like it's mono ar i dont know .. i just hear the music of a song without the lyrics !! strange !!
i m thinking that it's this peace defected it's called : Headphone-Jack-Flex-Cable-w-Earphone-and-Promixity-Cable-SAMF
because this piece is linking the earphone jack and the "brightness" responsable
what do you think ..
common guys !! no idea ??
I want all the ringtones (call tones/ notification tones/ sms tones/ alarms) to be heard through phone speaker even when i'm plugged in to headphone...
Why i need this is bcoz, at night i sleep listening songs & i set the music app to stop automatically after 1 hour. Since my phone is plugged to headphone (it won't stay in ma ear throughout night) & the rings are heard only through headphones, i usually miss important calls & alarms during this time... i'm looking for a fix or an option in sound settings tht can make these tones to be routed through speakers only or through speakers & headphones both simultaneously. Please help.
Btw, I'm on genetICS 9.1.5 deodexed.
ujilraj said:
I want all the ringtones (call tones/ notification tones/ sms tones/ alarms) to be heard through phone speaker even when i'm plugged in to headphone...
Why i need this is bcoz, at night i sleep listening songs & i set the music app to stop automatically after 1 hour. Since my phone is plugged to headphone (it won't stay in ma ear throughout night) & the rings are heard only through headphones, i usually miss important calls & alarms during this time... i'm looking for a fix or an option in sound settings tht can make these tones to be routed through speakers only or through speakers & headphones both simultaneously. Please help.
Btw, I'm on genetICS 9.1.5 deodexed.
Click to expand...
Click to collapse
ok... problem solved... i think it was a genetICS issue... I'm on JB rom now & everything is back to the way how i want...
Hi i am having Micromax a57 mob prblm is
all songs n videos plays awesome when
headset is connected n as soon as i unplug
headset music n videos stops automatically
n when pressed play button it simply plays
without any sound.
Works fine when headset is on but not via
speaker..
pls HELP 2 fix this prblm
Thanx in advance...