Database Info

Announcement: Wizard Rom-Packer Kitchen V2.0

Welcome to the Wizard Rom-Packer Kitchen V2.0, with "Squeezer" technology!
Please read all the way through before starting, even if you've used a previous version.
USE AT YOUR OWN RISK!
This kitchen is easy to use, but is really meant for those with some previous work with other kitchens,like faria's or 004's or Molski's. (If I've left someone out, I'm sorry about that.) This kitchen is based on Bepe's Hermes kitchen, which has incorporated tadzio's reworking of maimach's imgfs tools. This allows the rom to be packed more efficiently, and thus more packages and files to be burned into the rom. The savings is not trivial, a few megabytes at least.
In addition, I have added a new Squeezer module, based on open-source UPX technology, which actually compresses Office .exe files, freeing even more room in the rom (a few more meg), and actually decreasing load times!
Although the Wizard Rom is not quite as malleable as the Hermes in that the extra space is not translated into additional user storage memory, at least the additional freeware, shareware, themes, etc. which can be burned to the rom do not have to reduce the user storage space.
I hope over time to enhance this further, as new innovations become available, (maybe someone will figure out a way to repartition the Wizard Rom?). Also, perhaps adding some way of automatically generating the xip directory. If you have suggestions feel free to let me know about them.
Error checking is not extensive, so be sure to keep your old rom available to fall back to! Check the size of the generated .nbf file. If its around 59 mb you are close to the limit. Be ready to re-flash in bootloader mode (after paring some packages or files) if the program exits before the 100% mark.
How to use:
Download your favorite base rom, at this point one from another kitchen, which has already been broken down to SYS, OEM, and ROM directories. Delete the SYS, OEM, and ROM directories from my kitchen, and copy the ones from the other kitchen in there instead.
Make a copy of the SYS\OFFICE directory in case of later problems (not likely).
An additional caution/strong recommendation is to delete the /autoupdate package from your roms. This currently does nothing anyway, so you won't miss it, and in any case would likely only create havoc with a custom rom. But additionally the repacking method used in this kitchen removes the extra space in the rom which was to be used for that anyway, and so autoupdate will definitely be useless in a rom built with this method.
Run the SqueezeOffice.bat program. (This compresses your main Office .exe's)
Make sure there is an 80040000-os.nb file in the ROM directory. (It may be called something else and have to be renamed. It'll be around 50mb in size.)
Now click on Start.bat, and away you go...
(Optional) If you want to later go back to using another kitchen, run the PrepareNewNB.bat file. After it completes, there will be a new, compacted 80040000-OS.nb file created in the ROM directory which you can move back to your original kitchen. (Also copy the Office directory back) You will loose some packing efficiency by building in another kitchen, but you will still gain lots of space from having visited here!
Depending on the kitchen you were using, either you will see selectable packages or not during the running of BuildOS. Use whatever method you were using previously to add new packages or to remove the ones you don't want. In general, everything should work about the same way it did before, except you will be able to fit more packages in than previously! (Those who are importing faria's kitchen will have to rename his BuildOS.exe to BOS.exe and bring it into this kitchen. Also, rename his Flash file in the ROM directory to 80040000-OS.nb.)
You will be given the opportunity to go all the way to flashing the rom, similar to the way faria's kitchen is set up. Hold down the Control and "C" keys during one of the pauses provided if you do not want to go to the next step for some reason. (You have a G4, unlocked G3, want postpone flashing for later, etc.) Then press the "Y" key to abort when prompted.
If you'd like, check out the ZSqueezer directory, and the readme there. There you can compress your other programs for even more space (and speed!).
Thanks to all those who have helped me in the past, and especially those who created the tools and roms we all use and enjoy.
Version History:
Initial Unlabeled: Worked fine
V1.1: Added "pre-packing", had a bug in Start.bat
V1.2: Worked fine
V1.3: Deletion of .rgu files from the dump.
V2.0: Removed .rgu deletion (instability), and introduced "squeezer" compression.
Download Link: V2.0
http://rapidshare.com/files/33616241/Wizard_ROM-Packer_Kitchen_V2.0.rar

Standalone Squeezer Module
For those interested in having the "squeezer" technology for their own programs, but aren't comfortable cooking their own roms, I have created a standalone module for that. (Already included in the latest Rom-Packer Kitchen V2.0). I've also started a separate thread for that as well in the Upgrading section. Of course, feel free to leave comments and suggestions in either thread.
Here's the link: http://forum.xda-developers.com/showthread.php?p=1283338#post1283338
Have fun!

More space for later use.

thanks. i'll give it a go later tonight

I just tried these tools and didn't have much sucess....
I used the latest mUn base ROM, added some OEM stuff that I have been using without issues when creating ROM's with mUn's previous ROM. All this went OK. It got to the point of installing the ROM on the device but the ROMUpdateUtility just exited at 98% and left the Wizard in limbo. I have had put it in bootloader and re-intall a previous ROM
There was no message, it just got to 98% on the PC and the Wizard and then the ROMUpdateUtility just exited. I tried manually using the nb2nbf application and copying the resulting nk.nbf to another RUU folder and the same thing happened.
Any idea's?
Andy

ADB100 said:
I just tried these tools and didn't have much sucess....
I used the latest mUn base ROM, added some OEM stuff that I have been using without issues when creating ROM's with mUn's previous ROM. All this went OK. It got to the point of installing the ROM on the device but the ROMUpdateUtility just exited at 98% and left the Wizard in limbo. I have had put it in bootloader and re-intall a previous ROM
There was no message, it just got to 98% on the PC and the Wizard and then the ROMUpdateUtility just exited. I tried manually using the nb2nbf application and copying the resulting nk.nbf to another RUU folder and the same thing happened.
Any idea's?
Andy
Click to expand...
Click to collapse
Can't really say. I've also flashed mUn's latest, and it seemed to go ok. Did you create your own xip directory? If not, use the version in 004's kitchen as a base.

edhaas said:
Can't really say. I've also flashed mUn's latest, and it seemed to go ok. Did you create your own xip directory? If not, use the version in 004's kitchen as a base.
Click to expand...
Click to collapse
I had the XIP directory from the original ROM kitchen (in dOUbleOfour_Wiz_Dev_5.2.1413WWE.rar). I think I might try without any OEM stuff and build it up and see where it fails. In your original post you mentioned the error checking is not extensive, does it log any errors anywhere? (apart ffrom the log.txt file that looks OK).
Andy

ADB100 said:
I had the XIP directory from the original ROM kitchen (in dOUbleOfour_Wiz_Dev_5.2.1413WWE.rar). I think I might try without any OEM stuff and build it up and see where it fails. In your original post you mentioned the error checking is not extensive, does it log any errors anywhere? (apart ffrom the log.txt file that looks OK).
Andy
Click to expand...
Click to collapse
You put too many files, that's why it existed. I presume that because it exited at 98% , meaning that almoust fit, but it didn't . Try leaving out a package ...something about 1MB or so..mabe less

anichillus said:
You put too many files, that's why it existed. I presume that because it exited at 98% , meaning that almoust fit, but it didn't . Try leaving out a package ...something about 1MB or so..mabe less
Click to expand...
Click to collapse
Yep, I think that's what the issue is
When I tried cooking with this as the Base ROM previously I ran into size limitations so I was hoping that these new kitchen tools would solve this -
This allows the rom to be packed more efficiently, and thus more packages and files to be burned into the rom. The savings is not trivial, several megabytes at least.
Click to expand...
Click to collapse
Obviously not enough
I'll play around a bit more and see where I get....
Andy

I'm very sorry, but I left out a very important preparation step in my original posting. Please redownload the package to get the corrected version. (V1.1) I think you will find the results to be much more satisfying! Keep the bug reports coming..

the new start batch file doesn't have the correct paths in it. its trying to work in the root folder not temp.
the original one works good though. too late to flash tonight, but i'll give it a go tomorrow and let you know how it works

I tried to correct the start batch file to use temp but now get errors about not finding initflashfiles.dat in the temp\dump area. I don't have time to debug this right now.
I also noticed that the nb2nbf.exe is a Typhoon Smartphone version (so not sure that is correct for the Wizard).
I will say that the pre processor that does the packing is cool. The Faria Vanilla 80040000.nb (in Faria's kitchen its actually called FLASH.nb0, so I just renamed it) was 58.3MB in size. After running the PrepareNewNB.bat it was then 57.1MB, so a full meg smaller. I'll see about moving this over to the Faria kitchen and using it to rebuild my rom later and see how that changes things when its actually flashed to the phone.

i'll post the working one in a little bit.
edit... here's the one that works for me

notyourdaddy said:
i'll post the working one in a little bit.
edit... here's the one that works for me
Click to expand...
Click to collapse
Thanks, I was bleary eyed last night with trying to figure out what was going on that it wasn't working for you guys, and I ended up "fixing" some things that weren't broken I guess.
Just be sure to delete the old dump file in the temp directory after you run the preparenewnb.bat file.
Has the compression been working for you?
I appreciate your help. I'm juggling lots of things with "real life" and am sorry for the slip-ups.
I am updating the first postings.

notyourdaddy said:
i'll post the working one in a little bit.
edit... here's the one that works for me
Click to expand...
Click to collapse
Maybe its an issue with the Faria RK base rom and compatibility with this kitchen, but even with this updated file (thanks for that) I still get the following error when running the build os step:
Code:
Could not find file "temp\dump\initflashfiles.dat".
The other question is, is it ok to use the Typhoon Smartphone nb2nbf.exe that comes with this?

mfrazzz said:
Maybe its an issue with the Faria RK base rom and compatibility with this kitchen, but even with this updated file (thanks for that) I still get the following error when running the build os step:
Code:
Could not find file "temp\dump\initflashfiles.dat".
The other question is, is it ok to use the Typhoon Smartphone nb2nbf.exe that comes with this?
Click to expand...
Click to collapse
Yeah, I was just running through the faria kitchen and had the same issue. The workaround is to copy the initflashes.dat file in the OS folder and then paste it into the dump directory after buildos has deleted the previous dump and before it is processing the sys\os directory. (Watch the process messages at the bottom of the buildos screen.) This worked for me.
Yes the typhoon version works fine. I think they are mostly all relabeled versions of the same original tools. (Except the imgf tools which are recently updated by tadzio.)
Hope this helps.

weird. intiflashfiles.dat copied over for me using 004's kitchen

I just finished doing a build with faria's kitchen as a base, and was somewhat disappointed that I was unable to flash the entire kitchen at once. I had to leave out enterprise and voip (which is fine for me, but some may want them). I'd be interested in hearing how much extra space people are finding. I felt like I was able to cram a lot more into double_ofour's mUn release, but perhaps that's because it was more stripped down to start? Maybe "the kitchen sink" was a bit optimistic.

Re Faria kitchen
mfrazzz, The easy fix for the faria kitchen is to use faria's buildos.exe instead of the generic one I included. That one runs fine with his kitchen. Just rename it to bos.exe. (or edit the start.bat appropriately.) I don't think this will affect the packing of the files.

Update
OK, Things seem stable now. I've updated the first posting with additional information gleaned from everyone's input, and updated the version. The old start.bat that notyourdaddy posted should not be necessary.
FYI, I got feedback from one user that they got about 2.5 meg additional space from these tools vs the old tools. Not as earth shattering as I'd hoped, but helpful. Roms with more small files, as opposed to those with larger files will likely benefit more, as the savings are in the "padding" between them.
Feel free to incorporate this into your own kitchens.
Regards,

[UPD beta3] Microwave oven: TRANSLATE YOUR ROM - (for wizard only)

Hi ppl,
I've collected all the tools I use to translate roms from our chefs (God bless them). I don't want to steal anyone's work so the most of the credit should go to the creator of the tools I've packed, so all but Muiver, 2bytecut, Go.bat that were made by me.
It should be easy for everyone to make a translation following these steps (it's easier to do than to read ...):
1) Download and install windows PROFESSIONAL image in your language (source language) from here
2) Download your preferred foreign language (destination language) ROM (i.e. TNT or OCATIVOI or whatever ... )
3) copy the images over microwave dir, go to the command prompt and run GO "your language image file" "foreign language nbf file":
4) Let it run ... When Muiver opens up, set the right languages, pick your preferred options and hit GO.
MuiVer automatically looks for the right directories in the MS dump and copies it over the image that needs to be translated, modifying some files and making things you don't have to care about. At this stage you only have to choose, based on your (future) experience, what you want to copy and what not. The options are : Mui directories (OS), Other Mui files (OEMapplications), Other non MUI files (other language related files like staticdict); The more you copy, the most will be translated, more problem you may experience (missing texts, or applications that goes blank screen).
I suggest to always copy the MUI directories and experiment with other options.
5) You're nearly done only have to edit initflashfiles.dat according to your language. This file contains the localized name of some system directories and especially the start menu and start menu items names.
When wincmp opens up you will see two child windows: the left one is the file you have to edit, The right pane c0ntains the initflashfiles localized for your language. Edit the left one, according to what you can see in the right one and then "save source" from File menu. Take big care to the name of the "startup" dir (i.e. in italian it must be changed in "Esecuzione automatica") otherwise your rom won't start the customization (no screen alignment, no initial settings .. etc etc..). I suggest not to change the name of the links in the appbutton section however.
6) When nb2nbf opens up, set everything like always (look at the picture) and hit "translate" button
Flash your new translated rom (tools included)
It's a beta, just test .. I am quite happy with it. I'll update the script to run with other devices.
DOWNLOAD links beta3:
Rapidshare Download link
Mediafire Download link
Fixed beta3:
- Added a new tool to speed up initflashfiles.dat editing
Fixed beta2:
- Before flashing move or delete manually the file nk-old.nbf or the Updater could reflash that one in place of the translated one

it is good post, even in microwave oven cooked!

I think it doesn't work with ROMs that is >= 5.2.1620 because the shellresapps.dll.xxx.mui is incompatible with older versions?

Would someone be kind enough to translate TauRho3i to English.
http://forum.xda-developers.com/showthread.php?t=332663
Anyone want to try?
-McMex

starkwong said:
I think it doesn't work with ROMs that is >= 5.2.1620 because the shellresapps.dll.xxx.mui is incompatible with older versions?
Click to expand...
Click to collapse
If it's true, then remove the directory from dump.src dir before hitting "go" on muiver ... I'll check for it and handle the case in next version.
Would someone be kind enough to translate TauRho3i to English.
http://forum.xda-developers.com/showthread.php?t=332663
Anyone want to try?
Click to expand...
Click to collapse
Come on man ... you'have the tools now, why don't you try by yourself :|

can someone up load this tool to another host ? Ex: mediafire.com plz!
I'm having probs in downloading files from rapidshare

i'll try
mcmexican said:
Would someone be kind enough to translate TauRho3i to English.
http://forum.xda-developers.com/showthread.php?t=332663
Anyone want to try?
-McMex
Click to expand...
Click to collapse
i'll try
...but i'm waiting for my touchscreen

New tests shows that a very little number of .mui files (out of .mui dirs) are compatible with our WM6 releases ... for safe translations, do not copy them at all (MuiVer->File->options->Other Mui Files -> ignore all)
Hint: Take a look to the initFlashfiles.dat in the dump.src dir before editing the new one.
medkid said:
can someone up load this tool to another host ? Ex: mediafire.com plz!
I'm having probs in downloading files from rapidshare
Click to expand...
Click to collapse
Done
@Taurho: Take a look at the ROMUpdateUtility.exe

TauRho said:
i'll try
...but i'm waiting for my touchscreen
Click to expand...
Click to collapse
If I would have known I have a bricked 8125 sitting on my desk. But thank you.
-McMex

Working on TauRho3 WWE
mcmexican said:
If I would have known I have a bricked 8125 sitting on my desk. But thank you.
-McMex
Click to expand...
Click to collapse
one colleague of mine... and my first beta-tester has lent me his WIZ (only for weekend, of course)!
so....I take back the development!!!
and TauRho4 WWE is arriving
...hummmm sunday morning! (italy time)

Great job! I am so expecting tools like this, thanks.
One quick question - Does it translate all content of the ROM, incl. OS and OEM applications? Or only OS, not for other applications in the ROM? Thanks?

it doesnt work with me i have downloaded all image file's from microsoft and when i instald it i get a pocket pc dir a tools dir a Images License txt file and a Images Readme file so i placed it all including the nbf file in the microwave dir and pressed go and a msdos screen flashes for about i mili second and then it does nothing did i do somthing wrong??
or can someone please explain me better
thanx
Danny

Can you explain a little more point number 5 and 6 plz?
I'm transalating from wwe to spanish thx.
It's my first attemp to do something with kitchens, etc...

Nice release pal.
Maybe I'm doing something wrong but is not working for me... That's what i did:
Downloaded from MS my localized image and installed it (I don't have the emulator installed, just the image).
Already downloaded my english ROM (in my case, TNT 5.0)
Did the GO stuff in this way "GO <localized-Image> <TNT5-ROM>
Then flashed the resultant ROM and it is still in English...
... What I did wrong?
Could you please post a detailed explanation (if it is possible with printscreens) about this process?
Sorry but I'm a little dumb using this one...
Regards and keep on doing this great job!

@com_reg
Does it translate all content of the ROM, incl. OS and OEM applications?
Click to expand...
Click to collapse
It basically translate the OS and some HTC applications, but due to the high number of versions around, it is safe to only transalte the OS part. I've experienced problems with some HTC applications not displaying properly after translations. So you better make some tests excluding or not some files / dir from Muiver. I'll try to release a more flexible Muiver soon
@danny de w
Open a DOS prompt and type "GO <name of the MS image>.bin nk.nbf"
@cesarr4
Did you move your old nk.nbf in a different place ? The script renames it in nk-old.nbf but this is sometimes not enough: the update utility will still pick the old one in place of the new one. The easiest solution is to move the nk-old.nbf away from the microwave dir.
@JouSePo and ALL
I am at work right now and can't take pictures, I will do a better explanation with images when I'll be at home later. By now I can try to explaint it better by words:
During the process some applications will pop-up asking you to do something:
- the first one is the MuiVer, that automatically looks for the right directories in the MS dump and copies it over the image that needs to be translated, modifying some files and making thinghs you don't have to care about. At this stage you only have to choose, based on your (future) experience, what you want to copy and what not. The more you copy, the most will be translated, but you may experience more problem (missing texts, or applications that goes blank screen).
- The second application is a notepad instance, opened on your initFlashfiles.dat. This file contains the localized name of some system directories and especially the start menu. I suggest you to take a look to the initflashfiles present in the microwave\dump.src dir that is the localized version for your language and change the one in the notepad accordingly. The only part that REALLY NEED to be changed is the name of the "startup" dir (i.e. in italian it must be changed in "Esecuzione automatica") otherwise your rom won't start the customization (no screen alignment, no initial settings .. etc etc..)
- At this point the script will have built the nk.nb file that must be translated in a nk.nbf file in order to be flashed. This is done with the last program that opens up : nb2nbf. You will find a set of row in the middle of the screen, check the first checkbox in the first line and in the box on the right pick the nk.nb file from the microwave dir. On the same line choose OS in the combobox on the right and then just click on the text box on the left. A number will appear, it is all ok. Now click on translate and you're done.

Nice printscreens smogdragon!
Thanks!
I have a question:
Which .BIN file should I use? The installed file from Microsoft extracted the following .BIN files:
PPC_ESN.BIN
PPC_ESN_GSM_QVGA_VR.BIN
PPC_ESN_GSM_SQUARE_VR.BIN
PPC_ESN_GSM_VGA_SQUARE_VR.BIN
PPC_ESN_GSM_VGA_VR.BIN
PPC_ESN_GSM_VR.BIN
All of them with same size... Which one should I use for my QTEK A9100 (Wizard)???
Thanks in advance!

In addition to my previous post, I'm getting the following error message when click on "GO" button at MUIVER program (see attachment).
What is going on? It doesn't happens when using Beta2 release.

@cesarr4
PPC_ESN_GSM_QVGA_VR.BIN is the best match with wizard's hardware.
As for the error, I've never seen that But I can see on the command prompt that you had a previous error "acces is denied". I would try to start clean, deleting dump and dump.src directories. Ah, be sure to have administration rights. Let me know

thanks for your prompt responses and your help.
I flashed the resultant rom to my Wizard and it is working fine but some issues arised with built-in apps. By example, the phone app doesn't start and built in software keyboard doesn't show up...
I was wondering if it is possible to extract the OS part from the MS image and pack it into a nk.nbf file and flash it (I mean, do not transkate a existing rom but using the OS inside the .bin file and flash it to the device)...
it is possible? what can be the side-effects doing that?

hello smogdragon
i tried using cmd and it work t for a little bit when i deed everything you said it say that it cant find this file cant find that file it cant find muiver nothing get recognized by cmd
but its all in the same dir and the image file too

New ROM!!! - TechLust ver1 BETA <SJK> - Help me cook better!

Hey Wing Nuts! Sorry... I'll never make that joke again...
I'm new to cooking, so I need help. This is my first ROM. I have done minimal testing and have made no changes as of yet. I'm hoping a couple of you can help me figure out what to add, change, or remove from this ROM and work out any of the other bugs so I can get better at making them.
The goal of this build was to make something aesthetically pleasing, not too stripped, and still lightweight enough to make the most of the limited space on the P4350.
This build is for the Wing only (Herald keyboard is not supported) and was designed for use with an RUU. I have no idea if it will actually work via SD re-flash, but if you decide to try, let me know.
Any and all help is greatly appreciated. Thanks in advance.
Message me to get a DL link.
On a side note, does anybody know how to add CABs into SJK so I can cook them into ROMs?

Maybe I can post the link like this...
Code:
Go to mediafire and use the following extensions, but replace the commas with slashes:
,file,widwm4iji4y,T L ver 1 - BETA.nbh

If you want, follow my guide in my sig to learn how to utilize .cab files in your building experience.
I'll also give the ROM a run and test it out for you.
Please also do me a favor and let me download your kitchen .erv file so I can help you better..
Navigate to C:\kitchens\SuperJustKitchen\Working_Folder\TOOLS\RomSaved and you'll see the saves that you saved.. If you didn't save, try to mimic your ROM again in the kitchen and save for me and then upload it here in a .zip file.

I think I understand. I'm cooking a new version right now, so I'll get those files to you as soon as it's done. I'm using the most recent version of SJK, just fyi (the one based in osKitchen1.0). I know where the .fe file is, but I don't have a Working_Folder in my SJK files...
I tried using your guide, but the pictures you have posted don't match what I see, so it confuses me...

My kitchen files are based off of Bebe's kitchens. I have links on my guide on the first post of that thread.

What build are you using?

Version 7. And in my guide I have all the Sys & Xip files that are also up to date too.

lol @ "wingnut." Made me chuckle.

So, update...
Recent computer issues have lost me some cooking time...
Also, when trying to cook the new ROM, SJK seems to have lost a file that is integral to the creation of a new rom, so I have to go back and find it in the original .7z files.
I also installed Ivan's JustStable5 Micro onto the test wing, and now it won't accept a reflash either through SD or RUU. So I have to work on that issue as well. I'll let you know when we're back up and running.
Otherwise, any existing feedback on the ROM will be helpful before the new version is finished. Thanks everyone!

New Release
Ok, so all off the issues I was having have been solved. I've switched to bebe's kitchen (thanks Trib!) with Ivan's files and have a new version uploaded. Link below.
Changes:
Some icons changed to fit theme. More to come!
Custom splash animation added.
(Trib, how do I change the ugly orange Windows image, as well as get rid of the greenscreen startup?)​Rid ROM of several useless files and added a few new ones.
ROM size dropped 20MB (From 77MB to 57MB)​
After Flash:
Storage Memory:
Total: 45.92
In Use: 7.64
Free: 38.28​Program Memory:
Total: 49.83
In Use: 40.42
Free: 9.41​
Code:
http rghost net,1487003

Tribulattifather said:
My kitchen files are based off of Bebe's kitchens. I have links on my guide on the first post of that thread.
Click to expand...
Click to collapse
Thanks Trib. I actually like Bebe's version better...

You're welcome. I feel bebes is easier to work with..

I'll get the save file uploaded soon. There's an issue that I noticed with the "incoming caller" icon not showing. I modified it so that the sihlouette(sp?) is outside the original square size, but not outside the original image size? Is that a picture demension issue?

Archive your complete working_folder for me and upload. I'd like to see all files so I can help..

Unfortunately, the work computer isn't working again. I've never gotten so many BSODs in my life without any real explaination as to the problem. It seems to do it whenever it feels like it.
Anyways, I digress, I'll get you the working folder as a 7z asap. Post any thoughts you have on the ROM in the meantime.

Hey, I can't get the file to upload to rghost. I zipped it with "ultra" compression. Should I have done something different?

Use mediafire or 4shared or megaupload then.. I have an account with all of them.

Is it normal that the WorkingFolder.7z file is over 300MB?

Yeah, that's nothing.. My kitchen is over 3 gigs - thats 3072 MB's , lol.

So, I'm trying to work with rghost, filefactory, and megaupload all at the same time, but none seem to be actually accomplishing the upload. wtf.

Opera 9.7.36000

New Opera version: download
You know the drill... unpack and copy opera9.exe over the opera9.exe in the \windows folder (preferably using Resco File Explorer)
Changelog: don't know
Is it better than other versions: find out yourself

thank you

Thanks very much

Thanks dude.

Hi, what about the people who do not know the drill? where do i copy the file? and then what do i do? do i have to use resco explorer, i want to use the normal file explorer. i have a T-MO HD2

Kazz88 said:
Hi, what about the people who do not know the drill? where do i copy the file? and then what do i do? do i have to use resco explorer, i want to use the normal file explorer. i have a T-MO HD2
Click to expand...
Click to collapse
You have to extract the Opera9 file and copy directly to Windows.
It is all.
Best Regards,

Hi, what you have said is a bit vague. the extrated file from the download is an exe file so dnt i need to run it once i copy it over? and what windows directory? do you mean the windows folder on the device memory? not the opera9 folder in the windows directory?
so your asking i copy the exe file into the windows folder on the device memory and just run the exe? is that what i do?
please explain properly (full file path and instructions)
Thank you very much

Kazz88 said:
Hi, what you have said is a bit vague. the extrated file from the download is an exe file so dnt i need to run it once i copy it over? and what windows directory? do you mean the windows folder on the device memory? not the opera9 folder in the windows directory?
so your asking i copy the exe file into the windows folder on the device memory and just run the exe? is that what i do?
please explain properly (full file path and instructions)
Thank you very much
Click to expand...
Click to collapse
Yes you have to copy Opera9 file to the Windows device memory, then you will be asked to overwrite, so you should tam yes.
Afterthat you can normally run Opera web browser but in new version.

just in my head?
is it just in my head or is this much faster!?!

ty gonna try it out

tobiascrystal said:
is it just in my head or is this much faster!?!
Click to expand...
Click to collapse
Much faster doing what? Page loading times are about your internet connection are they not?
Faster optimization, screen rotation? Pleaze post !

I copied the file overiding the original and when I try to start opera, it says "Opera Loader" with a red cross which when pressed it exits...
Any thoughts?

appelflap said:
New Opera version: download
You know the drill... unpack and copy opera9.exe over the opera9.exe in the \windows folder (preferably using Resco File Explorer)
Changelog: don't know
Is it better than other versions: find out yourself
Click to expand...
Click to collapse
I deleted the existing Opera.exe file from the Windows folder and copied this one, but the app won't start. I think it has something to do with the attributes of the new exe file. The ROM attribute is ghosted. Any ideas?
Thanks

Procedure is clear to me. Just overwrite .exe file with new .exe file
But to spare me hazzle and spending one day to revert: does this change my opera-settings which I tweaked in operaconfig or goof them by incompatibility ?
Does this new build support flash better than the old one ?
What EXACTLY can the new build better than the old one ?

troed said:
Procedure is clear to me. Just overwrite .exe file with new .exe file
But to spare me hazzle and spending one day to revert: does this change my opera-settings which I tweaked in operaconfig or goof them by incompatibility ?
Does this new build support flash better than the old one ?
What EXACTLY can the new build better than the old one ?
Click to expand...
Click to collapse
I have similar questions,my opera is skinned and as troed mentioned
several operaconfig tweaks including having moved the Cache.
Anyone know whether these will all need re-doing if we upgrade
to newer version ?
In short is it worth the effort just to have a different version number ?

Anybody notice that with this version Manila internet ta bookmark thumbnail don't work with manila 2016?
I and others using the whole package. I have not tried only the .exe

bobsbbq said:
Anybody notice that with this version Manila internet ta bookmark thumbnail don't work with manila 2016?
I and others using the whole package. I have not tried only the .exe
Click to expand...
Click to collapse
Hey Bobsbbq, do you mean the thumbnail not populating a page image? If so, yes I have. The only way I've found to get the image to show up is to open each favorite site in IE.

[TOOL] RegawMOD Zip Signer v1.0 | 9-28-2010

Description:
RegawMOD Zip Signer is a tool for Windows that allows one to sign an unsigned zip (ie: a complete ROM zip, a theme zip, or any update zip) to enable flashing from a custom recovery on your Android device.
Usage:
To use, just drag the zip that you want signed onto the program's icon and it will sign it for you. All you do is drag and drop, and it signs it! Can be run from anywhere on the computer
Screenshots
Screenshots
Changelog
Version 1.0 | 09-18-2010:
Initial Release
Latest Release
Version 1.0
Download Info
MD5: b4dba6950d3c8a1423c88985e0293f23
Virus Total Report
Source Code Available By Request Only

Please post here with feedback so I can make it better, if necessary

Awesome, thank you sir. I would test it out, but I just switched my laptop over to Linux (don't ask why because I am questioning myself right now.)
But I will add a mirror for you because I know some people have issues with 4Shared.
MegaUpload Mirror

exactly what I was waiting for! Thanks for another great tool!!!!

thank you sir.

would we still need to delete the three files: CERT.RSA, CERT.SF, MANIFEST.MF prior to zipping and then drag/drop, or is it not necessary to do so?? Thanks in advance.
edit: looks like deleting those files and then signing them re-adds those files into the zip

Thanks regaw. I have been trying to find a way to sign my zip file.

heyman123 said:
would we still need to delete the three files: CERT.RSA, CERT.SF, MANIFEST.MF prior to zipping and then drag/drop, or is it not necessary to do so?? Thanks in advance.
edit: looks like deleting those files and then signing them re-adds those files into the zip
Click to expand...
Click to collapse
Not sure about that, I usually just go ahead and do that anyways.. I in fact have never tested it without deleting those 3 cert files, so I wouldn't know. I'll test it tonight.
joshhunt said:
Thanks regaw. I have been trying to find a way to sign my zip file.
Click to expand...
Click to collapse
Awesome, this should be a great way to sign it easily
heyman123 said:
exactly what I was waiting for! Thanks for another great tool!!!!
Click to expand...
Click to collapse
No prob Hopefully more coming soon!
I am uploading it to a real server now, no more 4shared

Awesome. I am going to be starting my themeing project this week and this will save me a step. Great job.

If you like this, check out a cool program I just made for Omegasuns BareBone App and Sense Removal Script! Allows full editing of the zip's script without having to resign it afterward.
HERE
http://forum.xda-developers.com/showpost.php?p=8363452&postcount=52

Thanks! I'll be saving this for when I flash new roms.

link is down? or am i down?

Hmmm, that's odd, the entire server is down... I'm contacting the owner right now to see what's up.. all of my files are down for right now...

Download worked fine. Script worked like a charm.
Thanks

Is there a reason why it just sits on "Checking zip...." for 10mins and doesn't do anything? I've done this several times.
I can't get this to work

This thing is awesome. Fyi.

Thanks a lot for the program. Do I have to follow any special procedures if I want to sign a rom, or is it really as simple as removing the apks I dont want, adding the ones I do want, changing the boot animation and dragging and dropping the changed rom? Most roms come with programs that I would rather remove before flashing and there are a lot of little things I like to add before flashing--saves me the trouble of removing them w/ TI.
Cheers!

nice work, glad to see you in the evo forums

I can't seem to get this to work. Says it has created a new .zip file but it's not listed. any help??

re2gie01 said:
I can't seem to get this to work. Says it has created a new .zip file but it's not listed. any help??
Click to expand...
Click to collapse
Try searching for the file. Whenever I use it, it says it created the signed file in the same directory as the original file, BUT it was actually in C:\documents and settings\user.