[Android] Eclair 2.1 with working wifi, GPS, sleep - Touch Cruise Android Development

Hello friends! I'm back again with the newest configuration I've found.
It's an Eclair build that runs exceptionally, with wifi, GPS and sleep working from the very first time.
If you want to try and forget your Donut build (1.6) you will have to do the following:
Choose a POLAIMG dated 20-Feb-2010 with your correct paneltype (1 is very common) and resolution from this site: http://sourceforge.net/projects/androidhtc/files/. Mine was POLAIMG-PANEL1-320.NBH (the most downloaded of them).
Download this file (http://www.homecncfun.com/wp-content/plugins/download-monitor/download.php?id=2) and extract androidinstall.tar from it. Copy it to your SD Card under a folder called "andboot":
Flash the previously downloaded .NBH file as usual.
During the boot you have to enter the Android Installer. A message will appear on the screen saying that you have to press and hold a button in order to start it. There are some buttons that are valid, for example, pressing the center button into the jog-wheel will work. Press it and hold it until the installer appears.
Select both System from NAND, Data from NAND.
Select Install.
Quit.
Let it start (slow).
What's working?
Wifi
GPS
Data connection
Phone - Calls, SMS
Sleeping (as far as I know)
USB Tethering (with PDANet)
Not working?
Camera
Audio input fails after the first use
Bluetooth
Live wallpapers
NOTE: If the screen resolution is wrong for you, you can change it modify system/build.prop. Guide here: http://forum.xda-developers.com/showthread.php?p=5709153
Enjoy!
More info:
http://forum.xda-developers.com/showthread.php?t=634782
To report bugs:
http://bugs.homecncfun.com/

i think poly's 2.1 beta is newer
http://forum.xda-developers.com/showthread.php?t=600154
anyway on both roms on polaris nand wifi is turning on but almost
non productive-slow
as well as battery issues u need to calibrate as mentioned on other posts

reiteravi said:
i think poly's 2.1 beta is newer
http://forum.xda-developers.com/showthread.php?t=600154
anyway on both roms on polaris nand wifi is turning on but almost
non productive-slow
as well as battery issues u need to calibrate as mentioned on other posts
Click to expand...
Click to collapse
*sigh*
was ALMOST about to finally try it out..
what's the gps like? is it just tomtom or whatever apps or some google thingie?

I've tried this one yesterday on SDCard with a partitioned system (cause I can't flash to NAND...) and it's very very slow
Don't know if it's better on NAND but I doubt that the difference could be so big...

I don't find it really that slow... It's a little slower than 1.6 of course, but it's still quite usable.
One thing that really put it down is that I know have an audio bug that affect the phone calls.
After calling one (or beeing called) the sound will not work (either people won't hear what I say or I won't heat people).
I have yet to try the other 2.1 build but I think this could be the end of 2.1 for the time beeing and going back to 1.6 while waiting nexus to be out in france

Is there any way to run this with the classic haret method (all files into the root of sd card)?

k_o_t_s said:
Is there any way to run this with the classic haret method (all files into the root of sd card)?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=600154
and follow the sdcard install method.

Hi, I installed this with the SD Method to use it from WinMobile
I once was in android but had to restart because I did not turn off key lock in windows mobile before.
But now i can't boot into android or only at 2% chance.
I get ther error "msm_i2c msm_i2c.0: Error waiting for notbusy" and android wont boot. What should I do?
I have partitioned my 8GB SDHC with gParted to "7GB Fat32/270MB EXT2/271MB EXT2"

Polarfuchs said:
Hi, I installed this with the SD Method to use it from WinMobile
I once was in android but had to restart because I did not turn off key lock in windows mobile before.
But now i can't boot into android or only at 2% chance.
I get ther error "msm_i2c msm_i2c.0: Error waiting for notbusy" and android wont boot. What should I do?
I have partitioned my 8GB SDHC with gParted to "7GB Fat32/270MB EXT2/271MB EXT2"
Click to expand...
Click to collapse
Just reboot to WM and run haret again. After two or three attempts the
Android boot works without "Error waiting for notbusy" messages.
Regards,
Stefan

You are right, but now I enter my pin it says sim is locked and i can't unlock the phone.
I already did deactivate throttlelock and keypad lock in winmo.
Also the pin-pad is too large for my polaris.
What can I do?
And another question:
In the haret.zip there were two images, zImage and zImage-eclair.
Did I install Donut, because in my default.txt there is
set KERNEL zImage
Click to expand...
Click to collapse
and not zImage-eclair

if installing 2.1 than change in default.txt to zimage-eclair
if 1.6 leave it as zimage

Ok then obviously I installed donut 1.6
And I will redo with eclair 2.1 and see if I have the sim locked error and too large screen there too.

For you information, I just went back to Warm's Donut as any 2.1 build only allows me to call once then the audio will stop working. Ergo I need to reboot after each call... not usable !
Maybe people can tell me if they have the same problem or not ? Maybe it has to do with the radio that I'm using ? (I haven't updated since more than 1 year)...

st_voss said:
Just reboot to WM and run haret again. After two or three attempts the
Android boot works without "Error waiting for notbusy" messages.
Regards,
Stefan
Click to expand...
Click to collapse
This is really annoying, because it means you can only boot at 20-30% chance.
And every time I have to wait until win mobile has rebooted.

raist1976 said:
I don't find it really that slow...
Click to expand...
Click to collapse
Don't know why, but it's really slower than all hero or tattoo builds I tried, to make a comparison.
Maybe my SDCard isn't in its best days...

Same with eclair, keypad really to big. One complete row is missing, numbers 7,8,9,0 and enter. (even though I set lcd.density to 128 in default.txt)
And the display always turns off after one second till i use the jog wheel again.
I cant enter the pin.
OK, I just read that with "turn off pin in win mobile" it is meant to turn off phone-sim pin. And not device pin. Then I will turn on my phone in win mobile to turn off pin requirement and see if android works.
--------------------------------------------------------
Need help again.
Eclaire runs pretty smooth, I had worse expectations.
But when I click on the android logo to start, I then click skip and the only option left is to create a google account or log into an existing google account. Even if I log into the account it says I can add more google accounts or press back. But if I press back I get to the google thing again.
And more worse it costs 3G data, 0,09€/minute
EDIT: I did turn off my phone function in win mobile and instead did turn on wifi. Then it took my again 3 times to boot android, but now the wizard no longer blocks android gui. yeay

How can I turn off the phone function in android?
EDIT: found it under "Modem" pretty weird
EDIT2: Im not quite sure, but i think phone is still on, where the hack can I shut off the usage of phone

Kiiv said:
Don't know why, but it's really slower than all hero or tattoo builds I tried, to make a comparison.
Maybe my SDCard isn't in its best days...
Click to expand...
Click to collapse
Well ... after putting back the warm donut I do can see the speed difference...
But over the two eclair builds, the kaiserdroid seemed the fastest.
There are some speed problems for some actions, but most of the time it's usable.
Anyway I went back to donut hoping to fix my problem of "one call allowed or reboot" without success... might be the new nbh that I flashed lately ... or the radio not compatible ?

I can't boot again. I tried 9 times and it show "error waiting for notbusy" every time.
Does this come from taking out the SIM card? I did this because I found no option to deactivate the phone function in android.
EDIT: Now I set the "ppp.nostart=1" and could boot into android after 2 tries withot SIM card inserted"
Wifi is really sloooooow
It is only tech-demo, wifi not really good, market place does not open, keyboard too large (fills 80% of screen), many other things.
I'll wait either for a better version of android for polaris or till I can afford a HTC desire

I have flashed my Polaris using the same nbh and rom as described in the first post. To fix the density, I tried to edit build.prop file from 160 to 120 using Astro but Astro will not save my changes to the file. I checked the file properties and I do not appear to have rw access even after issuing the $"su" and #"mount /system -o rw,remount" commands using the terminal program. I am not very Linux savvy ... have I missed something? Thanks!

Related

Homescreen

HI. I´d love to have the s730 HTC home screen on my Vox. Does anybody know where could I get it?
Thx
Ditto that! I also have a 710 and would like the 730 homescreen/theme
Same here
We have tried to use the extracted files posted here earlier but it seems there is bunch of stuff missing...
Any new extraction or guidance would be helpful as well
The file posted here can be extracted : http://forum.xda-developers.com/showpost.php?p=1732690&postcount=4
I've been able to use HTC homescreen on my vox but I can't get some things to work like the favorite people application and the weather part... In fact only the clock works
Unfortunately I don't have time to look further into it, but it shouldn't be too difficult for the geniuses out there
wont spb mobile shell give a similar home screen?
Isn't it only for pocket pcs ?
It´s done.
HTC Home Screen for HTC Vox :
Found in this Forum under HTC Tornado. Works fine on my VOX. Be sure to install to the device!!! when you install it to SD Card Phone crashes at boot.
Thank you very much Gregory for this great theme.
Truplaya
Edit: Seems the phone sometimes crashes when you insert the sd card. without sd card it boots fine... Maybe someone knows why and can fix this error...
Before downloading you have to notice that this cab can cause a crash and you have to hard reset the phone.
Gah. A hard reset is now needed all because of that cab above this post.
Total crash, stuck in reboot cycle.
A warning to others.
(installed to device, not storage card of course)
Update: Seems that the cab did something to the phone's MicroSD support. Or something. I can boot the phone without having the storage card inserted. Any idea what may have been changed? I'm guessing something in the registry, but not sure really.
Same problem to me schlinkey. But i can boot without sd card and insert it when booted. I added a notice above about the problem. Sorry that you had to hardreset your phone.
Did the Plugin worked for you when you boot without sd card?
I can take some screens of my phone (Vox) with HTC Plugin tommorow if wanted.
Took some pictures this morning.
It's alright, a hardreset now and then keeps the phone running smoothly
When I managed to boot the phone (without having the SD inserted) I uninstalled the plugin. The error remained however, so ended up with a hardreset anyway
All working again now!
Got it installed on my Vox now, currently uninstalling look alike themes and stuff that I no longer use to free up space on my phone now. Thanks for getting the New HTC Theme to work on the Vox. Just ned to get weather plugin working now. I've also got an annoying problem where my Vox with my T-Mobile Sim in says that I am Roming and the carrier plugin says thatI am connected to T-Mobile UK. I'm in the UK and using a T-Mobile UK Sim.
Roland
No problem with the Home screen, but I have had the reboot problem with the SD card for ages.
I did manage to get it to boot with the SD card in by doing various things.
When I first had the problem switching to flight mode before a reboot fixed the problem. The after installing some software it would only reboot with the SD card in if I first ran SK tools to clear duplicates in the notification list and selected a home screen which did not access the SD card (including the MRU list) such as "Windows Simple".
When I installed the Office 6.1 update the problem appeard to go away.
Then I installed Facade and so far have not managed to get it to boot with the SD card inserted.
I guess I could uninstall Facade - but I want to use it.
A Hard Reset is too drastic and I don't want to try that - easier to remove the SD card than to spend all day re-installing everything on my phone - no gurantee it will work anyway.
I suspect its a problem with the SD card driver as I have read that later ROM versions fixed the problem.
wizgnome said:
easier to remove the SD card than to spend all day re-installing everything on my phone - no gurantee it will work anyway.
Click to expand...
Click to collapse
Sounds like you need Sprite Backup 6
Gunde said:
Sounds like you need Sprite Backup 6
Click to expand...
Click to collapse
I thought about that - not tried it - I assume it would back up all the registry settings along with the files.
But if I do a restore, I assume it would be back as it was before the hard reset, including the cause of any problem.
Although I suppose it might allow for some experimentation, with the ability to put things back to how they were before any changes were made.
Can someone who has used it give some comments on how useful sprite would be in these circumstances.
Hi all! Has anyone experienced the "My People" application stopping working after a while? After I installed it, it worked shortly, but now when I try to open it, the list flashes quickly, then disappears. This is from both the Home screen, and through the Start Menu. This has happened both times I've installed it. Any ideas?
Thanks!
ssorrell
Just now installed on my S620 Excalibur and seems to work ok.
John
And my home screen ;D
http://www.e650.zafriko.pl/kat/tuning__d
and how quick is you home screen with that smart toolkit and 3d menu ? bacause i got it before and it`s really slow !! I love this HTC 730 homeS .
those are all files wichout 3D menu and work good lake wihout "tuning"
but keylock need lock from pres key profiles/off display and select keylock if u use difrend keys to keylock or methods 3D menu god/off and need run again its bug affter instal smatoolkid ;/
enjoin ;D
*now i use smartoolkit RC.0.0.0.9 and settings:
in general first are all disable wihout run on startup and show's txt... and second row its disable then smartoolkit wen pres home button show and hide
Ps. sorry for my eng;/
i have the HTC 5800 and when i try to install this i get a message about not having sufficient privledges.
Any ideas?

Wake issues with newer ROMS

I am posting a new thread because I'm experiencing the issue with several diffrent ROMs so obviously it's a general issue not a ROM specific one. Also I have read through countless pages of posts with no luck so hopefully someone can shed some light. Over the past few days I've flashed (forgive my spelling) dude's .5, ravenge, cynogen 3.4 and I have been having issues with the phone not waking after either I put to standby myself or the screen times out. I know it's not an issue with my phone or card because I go back to virtudude's ROM without the issue. I have tried everything, formatting my partition, ext2, ext3, wipe, no wipe, everything I can think of and still have the issue accross mutiple ROMs. I know it's not just me because my friend with a G1 is having the same issue, as well as many people posting in the threads. Can someone please point me in the right direction to fix this issue please?
My phone:
G1 with JF 1.42
Newest SPL 2005
Newest 26I radio
8gb SD card, class6, ext2 or ext3 partition (same issue on either)
Thanks in advance for any help!
me too
I noticed this same problem, its related to wifi, when I disable wifi my phone wakes up, also I have searched everywhere too for a solution. I think the compiled wifi deiver in these roms are not compiled right. So its either this or some other problem.
Is your phone connected to wifi with wpa2 personal? One other thing I noticed is this happens at random, when it does happen adb and ddms say device is offline when the led is blinking, also bottom of phone gets hot.
Can any devs shed some light on what exactly happens when the phone shuts off? Because something is locking the phone up when the light goes off and is in standby.
I am doing a test, im leaving wifi on while the screen is off in settings, will report back
This happens to me also but its only with hero I also have the new radio and spl. I can run hero with no problems as long as I don't use apps to sd or lucids txt. The wired thing is that after I use any apps to sd it works great but only for a day sometimes a few hours. Then I will start to see freezing up or it won't wake up at all, unless I reboot or pull battery. I've tried to reformat my card, resize my partition I'm also lost on this one fresh out of ideas.
Do you guys think it might have somthing to do with the sdcards? Im useing a 4g class 6 transcend micro SD, its only about 2 weeks old. Jason what other roms gave you these problems?
defconoi said:
Is your phone connected to wifi with wpa2 personal? One other thing I noticed is this happens at random, when it does happen adb and ddms say device is offline when the led is blinking, also bottom of phone gets hot.
Can any devs shed some light on what exactly happens when the phone shuts off? Because something is locking the phone up when the light goes off and is in standby.
Click to expand...
Click to collapse
I personnally don't see the correlation between locking and WiFi, I was at work the other day and flashed a ROM and it was doing it. I have my WiFi off at work so that wouldn't have been the case that day. I do notice the bottom of the phone getting hot though.
In response to the other person with the sd card question I really don't think it's that as I have a class 6, have formatted every way possible. Unless the issue has to do with apps2sd, I use apps2sd on every ROM.
Glad to see I'm not the only crazy one on xda!
joe v said:
Jason what other roms gave you these problems?
Click to expand...
Click to collapse
Almost every ROM to come out in the last couple weeks has done it. TheDude's .5, Ravenge's ramjet, Cyanogen's 3.4.1, and the Cyanogenized Rogers ROM.
You know looking at these the one thing these all have in common is being Cyanogenized. And the only ROM to come out in the past few weeks that hasn't had that issue is Virtuedude's Rogers ROM, which isn't Cyanogenized.
If any devs are reading this thread if you can make a version of your most recent ROM without Cyan's build kernel and boot and see if that helps. I'd be happy to test it for you to try and get to the bottom of this. If you wanna shoot me an email hit up jasonsyn at gmail.
I've had the same problem, but for me it started after flashing Cyanogen's 3.4 release. Since then I've reverted back to his 3.3.3 release and everything is fine again. Perhaps it has something to do with the new SPL and these ROM's?
That seems to be the one constant among all of us with problems, we've all flashed the new SPL and radio.
EDIT: I asked cyanogen about it, we'll see what he says.
indiekid97 said:
I've had the same problem, but for me it started after flashing Cyanogen's 3.4 release. Since then I've reverted back to his 3.3.3 release and everything is fine again. Perhaps it has something to do with the new SPL and these ROM's?
That seems to be the one constant among all of us with problems, we've all flashed the new SPL and radio.
EDIT: I asked cyanogen about it, we'll see what he says.
Click to expand...
Click to collapse
Yeah but I've had the new SPL and Radio for a month and this just started a week or so ago...
I am having the exact same issue. I usually have wifi bluetooth and 3g disabled (saves battery) I noticed this started after grabbing the new spl, ever since it's been freezing in standby randomly. I'm going to try Virtudude's rogers rom to see if the combination of Cyanogen's boot image and the new spl is causing the freezing. Hopefully seeing as Virtududes rom isn't based on Cyanogen's boot image it won't freeze. I'll report back with my results.
I thought my button got worn out. I never had the symptoms on rc33. When I switched to cupcake back during hatkuros prime just before dudes first releases I noticed it. I thought if it wasn't my button it might be somehow related to jf kitchen since almost all my roms touch it at some point. Just speculation though, donno what causes it.
Hey what recovery image are you all running?
I'm gonna flash the new Cyanogens 1.2 Recovery image and see if that's the issue.
Ok so how gay is this? I just hung up from a phone call and the phone is stuck sleeping! I was using it and it won't wake up, this is so incredibly frustrating!!
I have the new recovery image, 3.4.1, and still issues.
Jason Syn said:
Ok so how gay is this? I just hung up from a phone call and the phone is stuck sleeping! I was using it and it won't wake up, this is so incredibly frustrating!!
I have the new recovery image, 3.4.1, and still issues.
Click to expand...
Click to collapse
try holding down menu or the power button...i had this issue and my sd card would "unmount unexpectedly" and then this ended up into my sd bein fried
for those who are having this issue, try saving a log of it from ddms after that adb shell reboot thats what ive been doing ... instead of removing the battery, though my issues seem to happen every 24 hours i was on cy's 1.1 just flashed 1.2 perhaps that was is the issue?.. either way... we should try to collect all the info we can while this is happening to us.
dbhatesyou said:
for those who are having this issue, try saving a log of it from ddms after that adb shell reboot thats what ive been doing ... instead of removing the battery, though my issues seem to happen every 24 hours i was on cy's 1.1 just flashed 1.2 perhaps that was is the issue?.. either way... we should try to collect all the info we can while this is happening to us.
Click to expand...
Click to collapse
Ok I'll be happy to but I'm a linux virgin...would you mind giving me step by step in adb and I'll give whoever the log that can make sense of it.
This happens to me also on The Dudes Roger built. I don't have WiFi enabled so it isn't that it seems pretty random and just I get no response from the phone and have to so the soft reset (Call Menu Power) and then it'll work again. Normally only happens like once a day though so I can live with it but it is a inconvenience and can be annoying if it does it when you actually need to use your phone for something with some importance.
well if you're on linux and have it to where adb runs from terminal , just type
Code:
adb shell reboot
but before all that ddms (dalvik monitor) just type ddms in terminal it will boot up and show everything your phones basically working with.. and issues,
now if your linux terminal doesnt work well with adb (cant get it to work , google "50-android.rules" and "51-android.rules" n see if those help, and also set your echo path right )
now if you're on windows just hit windows key + r type cmd , and set yourself into the sdk/tools directory, then type ddms that will start the dalvik monitor (try and save a log) make sure the log saves before rebooting the phone, when you're done you can just ctrl+c and type adb shell reboot, and your phone should reboot.
[just the basic]
i've ran into this intermittently...most of the time while using the browser or using the onscreen keypad during a phone call.
I'm on JF CRB43(which is 1.51 i think) with the Hard SPL and JF Recovery.
Only thing I've been able to do to get the phone to wake up is wait. eventually it'll come around. or pull the battery, which i try not to do.

[HELP] Can't do anything with SOD.

I'm going through this problem for almost 4 weeks, just when I was away of a computer by 1 mile..
I was getting problems to connect to internet with my PDA, and nothing worked.
Then some apps stopped working (like Messenger, Internet Explorer, and such included apps) and I decided to format my phone by using the HardSPL method. Installed everything again, and then everything was working fine.
After a few days, the buttons stopped working: Couldn't answer calls, or use D-Pad, couldn't get off standby mode and so on. Every time I needed to use my phone, I got to hardreset the PDA, wait it to power on, and use it. It was VERY annoying. So, formatted again and installed a new ROM. Everything worked fine and after a few days, again.. Couldn't get off standby mode.
I read somewhere that it happens when the SD card becomes faulty. It was. I formatted the SD and copied all the contents again. Formatted again the phone, and installed everything again. After a few minutes (yes, minutes), the phone wasn't responding again. I got to plug the headphones and press the HF key and sometimes it got back from standby.
When phone is kind of.. "null", I can't receive calls. SMS are rejected. But the power, Bluetooth and Wifi light keeps blinking as it was active.
I'm using a temporary phone right now. I can't handle it anymore. But I miss my PDA :S
A bit more info: I'm using Spanish NiAX WM6.5.3 ROM. And first ROM was Spanish NiAX WM6.5.1. Maybe it's a ROM fault. I don't know :S
Suggestions?
Thanks in advance..
PS: Read some other threads about this. Switched 3G/2G, changed SIMCARD and SDCard and still not working
EDIT
The problem is my Polaris has a couple bad blocks on its NAND.
In traditional english: The support of the OS (AKA Windows Mobile, or Android, for example) is damaged, so in certain points the data written becomes inaccessible or has trash data. That's the reason the phone doesn't wake up.
I can happen too if you have a faulty SDCard. The point is: Some data couldn't be read.
Currently I'm researching about how to live with this. There's nothing to do with Windows Mobile as far as I know, but we can make it work by using some custom set-up of Android.
I'll let you all know if I get some news, or see HERE where I'll post everything I find
Regards!
Bump!
Please, I'm travelling this week and my temporary phone now is broken, too...
PabloMDiez said:
and copied all the contents again.
Click to expand...
Click to collapse
That could be your problem(corrupted files) Check for viruses too(Not too careful)
Thanks A LOT for your answer.
I think that can't be the problem, since I formatted the SD card and put all the fresh content again (music an cabs from my home PC).
I found out that a new fresh installed rom works fine, until I install any cab.
The cabs I have, are stored on SDcard and installed to Phone Memory.
Maybe CABS are faulty. Or it's not recommendend to install from the SDCard.
I'll try installing the new rom again, and Installing all cabs from Activesync.
I'll publish any news.
Thanks!
Still not working.
I read somewhere that this is caused by SRS WOW with Security off patch.
tomorrow I'll reinstall the rom again, and all the software without that cab.
Worked fine for 3 minutes, SDCard wasn't plugged and failed once installed Simcard.
What comes into my mind, try downgrading everything to official HTC ROM, by everything i mean also radio(unplug sdcard and simcard when flashing)
Then check if it works, if not maybe there's hardware fault.
Try different simcard too.
What software are you using?
I suggest you follow pcarvalhos or alexander-voigt instructions on how to flash (basically you have to flash official wm6.1 before flashing a ROM if you observe stability issues) and then flash pcarvalho, alexander voigt (or mines). It should work if you follow the instructions exactly. Then try again Niax' rom
Post #1 updated about the reason of this.
Regards!

Froyo-B Kernel Panic

Ok I am confused, I'm trying to run Froyo-B Ver. 6 on my htc fuze. no overclocked. I have partitioned my microSD to FAT32 and ext2 yet I get the error,
kernel panic: no syncing try passing init= option
I have read about using init=3 which I tried with no success either
edit: I started to use the raph startup.txt and it seems to be going through not sure if it installed, about to check
Edit #2: After a few tries, I got android to load with the raph startup, Reformatted my memory card so many times do to haret.exe not finding the files needed to load. and now it's working fine. Touch screen and everything is at top performance.
Since I can't post on the Froyo-B topic, could someone answer me a question before this gets closed? On android when I make a call out or a call comes in, the screen goes black and I can't turn it on unless i slide out the keyboard. I messed with the settings so the screen stays on but still nothing. Does someone have the same problem or is it just my installation that's funky?

How to turn back to Windows Mobile from Nand-Android for HTC HD Mini

This thread is especially to all goddess dev on how to get back our Windows Mobile frm Nand-Android CM7..
To all dev, please leave your instruction below...
Thanx!
http://forum.xda-developers.com/showpost.php?p=21617447&postcount=2
Can I use a custom wm6.5 rom instead of an official HTC rom
you can, if you use cotullas sspl
I'm back to wm (official htc rom), and I can not fix the satellites (from Sense 3.5)...solution?
If you turn off gps in android you also turn gps off in windows mobile. Sounds a bit weird I know. I had this problem too. Solution was to flash back to Android turn gps on and flash to windows mobile.
my GPS still stoned...
Copy Android r175 on SD card, boot windows, start Android from SD and enable gps in Android settings.
for greek users
http://forum.xda-developers.com/showthread.php?t=1651194
another link for android froyo 2.2 (full version)
http://code.google.com/p/photon-android/downloads/list
ci6i said:
Copy Android r175 on SD card, boot windows, start Android from SD and enable gps in Android settings.
Click to expand...
Click to collapse
Not work on me. Start wm, start android from sd, enable gps - maybe here I m wrong, please detail- and reboot in wm. No gps position ...
elias2204 said:
If you turn off gps in android you also turn gps off in windows mobile. Sounds a bit weird I know. I had this problem too. Solution was to flash back to Android turn gps on and flash to windows mobile.
Click to expand...
Click to collapse
Veeery bad ideea ! Finaly, I find again this post. Because of this (I winder if elias2204 try his method ?), my phone was dead for 1 month :
http://forum.xda-developers.com/showthread.php?t=1963467
http://forum.xda-developers.com/showpost.php?p=33384285&postcount=822
http://forum.xda-developers.com/showpost.php?p=33371937&postcount=4
http://forum.xda-developers.com/showpost.php?p=33363876&postcount=22
You have the chance - like me :fingers-crossed: - to kill the phone as seen above. In that moment, all "heavy" members are silence . Nobody (can) help.
The only way to have back your phone is pay money in service center ! So, be careful when you try this !
---------- Post added at 05:23 AM ---------- Previous post was at 05:21 AM ----------
schlund said:
http://forum.xda-developers.com/showpost.php?p=21617447&postcount=2
Click to expand...
Click to collapse
NOT WORK !
To be honest: there is always a risk in flashing phones or other things.
And there is always a case where the usual way don't work.
I flashed my HD mini 20 - 30 times WM <-> Android, i tried everything what's provided here and my phone is still fine.
One thing that i can read (and not only here in this subforum) is, that the following way can bring the phone back alive. But you have to use the correct RUU (from your carrier) and maybe a goldcard (don't know on what this depends, i never needed one):
munjeni said:
Go to microsoft activesync "connection settings" and untick "allow usb connection". Boot your phone to 3 color screen. Connect your phone to computer via usb. Open mtty.exe and select usb connection. Click ok. If all is ok enter these 3 commands:
task 29 and press enter
task 2a and press enter
task 8 and press enter
Boot again to 3 color screen. Open your favorite ruu instaler and install wince. Thats all.
Click to expand...
Click to collapse
old.splatterhand said:
To be honest: there is always a risk in flashing phones or other things. You're right.
And there is always a case where the usual way don't work. You're right again
I flashed my HD mini 20 - 30 times WM <-> Android, i tried everything what's provided here and my phone is still fine.
One thing that i can read (and not only here in this subforum) is, that the following way can bring the phone back alive. But you have to use the correct RUU (from your carrier) I have it. But for nothing. Nobody show until now this way - http://forum.xda-developers.com/showpost.php?p=22912249&postcount=35. I read about two thousand page here, but i can't found this page. If if found (or somebody tell me about this), i have in this moment 50 eur more in my pocket
Click to expand...
Click to collapse
So, "If you turn off gps in android you also turn gps off in windows mobile. Sounds a bit weird I know. I had this problem too. Solution was to flash back to Android turn gps on and flash to windows mobile."
My phone not detect satellites - gps is detected in iGo. It is another way to repair this without "flash back to Android" ?
Thank you for intervention.
LE: In that moment, i run this http://code.google.com/p/photon-android/wiki/Android_Installation_Tutorial from sd card. I enable gps in android and launch "Navigation" but it stuck in "searching for gps". I can ' t acces market to install https://play.google.com/store/apps/details?id=com.eclipsim.gpsstatus2&hl=en. How can i include GPS Status in android on sd card to see if my phone detect some satellites or not?
Maybe you have to play a little bit with GPS Settings: Put it on, see if it works, shut down phone, try GPS under WM 6.5, then start Android again, try GPS again (if it worked under WM), or put GPS off, restart phone and do this on and on again, as long as GPS is working under both (WM & Android).
I had also no GPS at first time and this way worked for me. But i know this can be annoying!
old.splatterhand said:
For GPS Status:
Say when you have it, i will remove the link then.
Maybe you have to play a little bit with GPS Settings: Put it on, see if it works, shut down phone, try GPS under WM 6.5, then start Android again, try GPS again (if it worked under WM), or put GPS off, restart phone and do this on and on again, as long as GPS is working under both (WM & Android).
I had also no GPS at first time and this way worked for me. But i know this can be annoying!
Click to expand...
Click to collapse
I take gps status - can remove link. I ll try what you say.
PS: How put application ? Start android on sd card with app copy on sd and ... ?!?!
You also must remove it from your quote
You must allow in settings that you can install apps from another place as Google play.
You can install the apk by tapping it from a file manager like ES File Explorer.
old.splatterhand said:
You also must remove it from your quote
You must allow in settings that you can install apps from another place as Google play.
You can install the apk by tapping it from a file manager like ES File Explorer.
Click to expand...
Click to collapse
Ok. I install already. I thing the satellites are down ! :laugh:
I try what you say above.

Categories

Resources