Hi all,
Figured I should start a post with problems (in the quest for solutions).
I have had my v1605 from Vodafon for 3 days now and have found a few problems already. I have a replacement coming on Tue so will see what is fixed...
So far:
- keyboard back lights not working, matters not if the sensor is active or not. Vodafone replacing the unit as a result.
- some keys on the far right seem unsensitive - I keep missing O, P and L from my typing. The keys do work though...maybe it is just me.
- screen alignment wanders and as such I usually need to re-align the screen once a day or more. Seems always to drift left and slight lower than I am pressing.
- today screen items are locked and 'vodafoned', very annoying as I cannot show task list, owner info or lock status on the today screen. I hard reset the unit and reset it before the customisation happened and voila - the usual today screen items were back - but as a result I lost the vodafone dialer skin and the 3G symbol. I presume someone can ROM-hack to get rid of this restriction and look forward to it In fact, it would be perfect if the ONLY Vodafone customisations were the dialler skin, 3G symbol and theme.
- If you have a password set and hard-reset the unit it crashes when you are prompted for the password. Soft resetting it then skips the vodafone customisation.
- left softkey set to phone instead of calendar and no way to change it.
- no easy way to access Vodafone Live!
- camera quality pretty poor for a 2MP, no where near as good as the K750i for example. However, the K750i on its first firmware was pretty aweful too!
- when plugged into USB on computer - if you turn it off (so as just to charge) it will turn itself back on again shortly and commence another sync.
Other than these niggles, of which the today screen is the biggest for me, I love the TyTN. By far the best PDA/Phone I have owned to date!
So - over to you guys, does your v1605 have these issues or others, or none????
Rich
My slide out keyboard down't click into place on the left side the way the right does (and also the way the wizard does). It may not be a problem now but in the future, it may begin to wear and then it might affect the function of the keys??
Are they just swapping a unit for you or exchanging the whole package? How will you know if you get a brand new set? When I switched mine on, the call timers showed outgoing 40 seconds and incoming 45 seconds. I'm not sure if this is vodafone testing the units or it's not new.
Am told I am getting a brand new unit - will check call timers as they *should* be 0-0.
Just had a play with mine and I only feel a click on the right side of the keyboard too. Feels nice and solid once it is out though - not like the xda-mini-s which feels flimsy in comparison.
R
I do not see the "E" icon even in EDGE enabled areas. I even tried the HTC Wizard icon hack hack with no success:
http://www.htcwizardweb.net/node/191
'E' appears on my v1605
3G is awesome.
rakh1 said:
Just had a play with mine and I only feel a click on the right side of the keyboard too. Feels nice and solid once it is out though - not like the xda-mini-s which feels flimsy in comparison.
R
Click to expand...
Click to collapse
Thats great! was a bit worried that mine was a faulty unit. It does feel solid when sliding. It was just the lack of the "click" that bugged me.
Anyone else who received their unit had timers showing calls made and received from it? Its probably vodafone testing it. The unit is too new for any refunds/refurbs to have been made.
- some keys on the far right seem unsensitive - I keep missing O, P and L from my typing. The keys do work though...maybe it is just me.
My unit has this issue and I hope my next unit which is a brand new replacement that comes on Tuesday doesn't have this issue. My unit it is only the O that has problem which is getting better over time. I called them and they was more than happy to get a brand new unit to get sent out just want a perfect working one in my 14 day period so fingers crossed will keep you updated.
xxnoelziexx said:
- some keys on the far right seem unsensitive - I keep missing O, P and L from my typing. The keys do work though...maybe it is just me.
Click to expand...
Click to collapse
Do you also feel a click only on the right when you slide open the keyboard? Let us know how you get on with the new unit.
Don't feel no click at all. Will keep you all updated.
UPDATE:
New unit turned up - keyboard lights now work as expected.
Still only a right side click on the keybard - so it must just be the way it is.
Today items:
Fix posted here: http://forum.xda-developers.com/viewtopic.php?p=329204#329204
Hope that helps - Rich
Hi guys
Peter .. the guy that got his VPA Compact III two days after me as sent it back on the 14 day returns .... He was concerned about stability. He's always struggled to come to terms with WM stability which I can understand ... so he's off back to palm and blackberry.
From my point of view - I've had one hang during operations which still worries me (I left it at the today screen fine ... and 30 mins later I noticed backlight was completely off and it was utterly un responsive - wouldn't respond to incoming calls). It also hangs occassionally of soft reset or power on (from a complete power off). It usually comes up fine on a subsequent soft reset.
I'm waiting for HTC to call me back so I can raise this as a call. It seems to happen regardless of today plugins being active (I disabled all) - I have also rebuilt with 4 phases of Sprite Backup to restore from - and the problem hasn't gone away.
I suspect it is firmware / software as opposed to hardware .... fingers crossed.
Aside from that I love it as a device .... I just wish one of you guys that has one will let me know if you have had any hangs at all and where you see them.
My keyboard light works fine. It has to be in low light and you have to press a button before it activates - just opening the keyboard in low light doesn't activate it.
Occasionally I turn the device on and it starts in landscape mode and then switches to portrait ... odd .. because I didn't switch it off in landscape.
There is an odd moulding mark where the stylus comes out on the curved recessed part of the body (right hand side). I thought it may be a crack but I'm pretty sure it's just where the plastic moulding was finished before painting. If it's not cracked I'm not bothered.
You can change the WM5 softkeys with Tweaks2k2.
One thing to remember is that rather than use the phone executable, the device originally used a :MSC call. Once removed you can't put it back with Tweaks2k2. It's not an issue because a normal link to phone is fine. If you want Calendar ... then use Tweaks2k2 to change it.
My keyboard works fine ... no sticky keys. Peter had one or two on his.
Paul.
I just wish one of you guys that has one will let me know if you have had any hangs at all and where you see them.
Click to expand...
Click to collapse
No hangs here yet.....using it a lot with skype, camera, etc...
My keyboard light works fine. It has to be in low light and you have to press a button before it activates - just opening the keyboard in low light doesn't activate it.
Click to expand...
Click to collapse
Yes - same here...
Occasionally I turn the device on and it starts in landscape mode and then switches to portrait ... odd .. because I didn't switch it off in landscape.
Click to expand...
Click to collapse
I've not had this happen...
There is an odd moulding mark where the stylus comes out on the curved recessed part of the body
Click to expand...
Click to collapse
Same here - but very feint....
Rich
Hi Rich
What are you running at the moment ?
I'm try to find out what is different between my build and yours so I can narrow down possible cause of hang.
Paul.
By the way ... my build is :
So far I have SBSH iLauncher, HandyMenu, HandSwitcher, Legato Mahjong, Billiard Master 3, Bubbleshooter, PDA Mill GameBox Classics, BeJewelled 2, 1-Calc, Phatnotes, PIEPlus, Avantgo, CO2005, Clearvue Office Pro, CPL6, FW2006, imov Messenger, NewsBreak, Resco Explorer (without the Resco Today Plugin) 5.40, Resco PhotoViewer, SBSH Pocket Breeze and Pocket Weather, Skype 2, Sprite 5.1, Tweaks2k2, PI2005, FlexMail 2.2, FlexWallet, Cabinstall, Cruxview - all installed on the MicroSD.
Aside from an apparent hang on startup last night which scared me .... I thought I'd need to hard reset but it eventually sorted itself out ... hopefully it is s/w related .... it's all going well. Did a video call with Peter last night which was fine ... first I've done and picture quality not great but usable.
3G is active and working very well. Switches mid call to 2.5g if signal drops to much, but you don't get a chattering issue (i.e. where it regularly switches between the two).
Drove from Hook to Kent with CPL6 and BT GPS yesterday and that was flawless.
Have four phases of Sprite Backup - Different levels of build - so I can decide how far back to go in the event of problems.
Circa 28 mg of program memory following sof reset
Circa 31 mg of storage memory
PB is loading PI Calendar / Tasks / Messaging / Phatnotes / Pocket Weather.
Can someone help me with my wifi problem please. I can get connected to my network ok but IE will not show any pages, it just says wrong settings. I am connected with good signal strengh and thought that i would be able to surf when on my own home network. Most of the time it serches gprs and 3g then shows the error. An idiots step through guide would be helpful. I have searched for hours but came up blank. I also need a walkthrough on how to configue vodafone MMS settings as I cant get that to work either. Customer services isnt much good as the dont really know this device yet. Thanks in advance.
Hey Paul,
I have only the followinig intalled over the base v1605:
skype2
PHM Registry Editor
Microsoft .NET CF 2.0
Aspecto Software WiFiFoFum
Handmark Monopoly
That's it......
Rich
new unit arrived and the sticking key issue is gone thank god. I hve a few things installed now and the phone is running great. I installed agile messenger beta a few minutes ago as no msn client is in the vodaphone rom and the phone looked like it crashed then a few moments later it signed into msn.
1 thing I have noticed is if I mute the volume so I get a x sign near the volune if I click around I.e start menu and click around the operating system I can hear a clicking noise. could someone else test this 4 me I am currently in a quiet room.
also noticed when using pie with keyboard slid out my view will sometimes change from landscape to portrait view and then back to normal which is strange. I am sure my faulty device did this whilst just using the operating system in general use. shed a bit of light to what I have just found is that I just put the phone down open on the case it comes with and the same thing happened it must have something to do with the magnetic metal in the case effecting the phone causing it to rotate lol well that's what I think.
No clicking sound when I mute mine. Haven't really played around with mine yet. Will install everything once I get my microsd card.
Does your phone's keyboard click into place when you slide it open and is it right side only or both? Also did you check your call timers? Are they zero or has calls been made before receiving it?
Just got my TyTN
and all i got was a lousy keyboard..
got the bad keys on my unit. Waiting for response from HTC distributor, but they halted all sales of it until resolved. There are a lot of phones with bad keyboard.
But apart from that it seems to work fine - like the Jasjar in a smaller package.
But I liked the keyboard on my I-mate k-jam a lot better.
My first one had a few keys that weren't great, t, del and spacebar. This one is good for the keyboard. But....my screen is loosing calibration all the time again which is why I was given a replacement. Moves so that it is totaly unusable! Is anyone else experiencing it? If you are not is it a Voadafone one or something else. I've told Vodafone that I'd like another one out of a different batch and they said that they will extend my exchange period for a couple of weeks until some new ones come in. Might call HTC to see if it is a known "feature". Other than that I'm still totally happy with the device and it is much better at memory handling thn the Exec ever was, It never seems to drop below 22mb of program memory after having opened and closed programs for a clouple of days. The exec would have dropped to 17 by the end of the first.
Phil
Hi,
If I use the hardware keyboard (ie the one you slide out) in TomTom 7 it adds a weird character at the end of each letter, so for example if I write:
"New York"¨
It will appear on screen as:
"Nåeåwå Yåoåråkå"
Anyone have that problem and know how I can solve it?
I get it it tomtom 6 too, some peeps on here have had issues with it representing the same charater no matter what button is pressed in several different programs
yep, I get the same in TT7.
I get the same problem with TT7.... would be keen know if anyone has a fix.
yeah, I have that as well... very strange indeed...
Maybe someone comes with an answer...ya never know...
I use Tommy 7 btw...
+1 same here, pain in the ass so i just use the onscreen
I had this problem at one point but I don't now. I've been trying to think how i got rid of it.
I definatly installed the following patch http://www.tomtom.com/support/index.php?Language=1&FID=9852 other than that I played with the keyboard settings in tomtom and WM 6. Not much to go on, I hope it helps.
This seems to be a problem with the key assignment of the hardware keyboard, it behaves strange also in other applications. I solved it using the reg hack from this thread: http://forum.xda-developers.com/showthread.php?t=425646
Unfortunately, problems with auto-screen rotation appeared on my device.
i have the same problem, i found that KforTouchPro (http://forum.xda-developers.com/showthread.php?t=425646&page=4) can be use to fix the problem
Hey all,
I've been testing out MG on my HT TP and it seems to be doing quite okay.
I've used K for raphael to assign keys, but now I have a problem with sound:
If I activate sound it sounds laggy and the games go laggy aswell..
TF3D is disabled and NO progs running on the bg so im not sure what else could be the problem.. When I disable sound everything runs smooth!
I tried changing all the sound options but no luck yet.. did anyone have these problems aswell, and if so, how did you fix it?
komani86 said:
Hey all,
I've been testing out MG on my HT TP and it seems to be doing quite okay.
I've used K for raphael to assign keys, but now I have a problem with sound:
If I activate sound it sounds laggy and the games go laggy aswell..
TF3D is disabled and NO progs running on the bg so im not sure what else could be the problem.. When I disable sound everything runs smooth!
I tried changing all the sound options but no luck yet.. did anyone have these problems aswell, and if so, how did you fix it?
Click to expand...
Click to collapse
I've had those problems with other emulators. It's not something easily fixed, I fear. Emulators always play slower with sound because of the processing power. This phone is not going to be good for emulators because of the VGA screen. Driving 4x more pixels than a QVGA device requires a lot more power from the processor. I don't know if the video hardware is being used in emulators - but if it's not, the program would need to be rewritten to access the gpu.
It's exactly the same issue with coreplayer and movies.
You'd think it should manage easily because it has its own video card built-in.. probably not using it with MG then? Argh i'll mail them and let you guys know!
Hey guys!
I hope i post this in the right section now!
Anyway, i recently bought a Sunno S880. Problem is i cant really seem to get the g-sensor to work. Does WM6.5 support g-sensor? Cuz for me it doesnt work in any menu, not in picture gallery.. well nowhere really. Is it suposed to be like that? It kinda feels like my phone has some homemade, halfdone WM6.5. I've seen alot of phones that has that little bounce back in the menu when you come down the the end, or the top. Mine does'nt have that. When i press on the g-sensor icon in settings, all i get is a white screen with a bunch of squares in the middle. I suppose they are chinese letter which my phone cant show cuz i dont have the language installed. The only option i have in there is to press 1 button, then a window pops up saying something else in squares, and i get the options "Yes" or "No". I have tried pressing both yes and no but it doesnt do any difference.Everything else on the phone is in the correct language. Has anyone else experienced this?
My build is 28205.5.3.3 if that does any difference.
I know the g-sensor is working tho cuz i can use it in games.
I also have another question that i hope anyone wants to answer. I've been reading quite alot on the forums about costum ROMs. But what i cant quite figure out is what exactly is it that determines if a ROM work on a phone or not. Cuz, as the noob i am, i would think that as long as the resolution is correct, any WM6.5 would work on my phone, but then again, im a complete noob. So if anyone could just tell my why not all WM6.5 roms work on all phones i would be happy
Cheers
David
Anyone?
Same problem for me too, Last Week I purchased through online this phone Sunno s880. Exact your build mine too. I checked with those website, they are not responding properly. I installed Resco Photo Manager, then auto rotate works for viewing photo's. One more thing i couldn't use GPS. is it working for you? if works can you tell me the gps settings.
Hey, I've got gta 1.3 installed but when ever I enable acceleration my car turns to the left as if im holding my g2x vertically and not horizontally, ive heard of accelerometer calibration apps on the market but I cannot seem to find them. Is there any solution to this?
I have the same exact problem as well...
Ya, isn't only me that its been happening too and google doesn't wanna give me a solution
same problem here with v1.3.
and no fix so far.
gigantic bump, anyone know how to fix this? I really wanna use accelometer cuz I hate the touchscreen left/right