A fast review of my Resin Skin Case - Nexus One Accessories

I ordered this on Feb 12 and got it today Feb 16, would of probably been faster if it wasn't for the weekend and Presidents day.
Unlike my first of the same color with checkered marks, this one is clear and smoke colored, Fitment is fine, putting it on for the first time was a tight fit but it will give you the peace of mind that once its ON, its ON forever and this sucker isnt going anywhere. Fitment is perfect and all holes line up. What I like most about this is that it extends over the Camera lens unlike the previous one in which there was no protection at all.
I like it and will be ordering from these guys in the future.
www.googlenexusoneaccessories.com for $12.99, price might be a little high but I am very satisfied.

Not a bad price for a perfect fit & good protection!

Is this actually a crystal case? if so then I think it's a little too steep on the price.
But it does have an acrylic / rubbery look to it compared to a normal crystal case, but then again, also the pictures are quite blurry.

droidzer said:
Is this actually a crystal case? if so then I think it's a little too steep on the price.
But it does have an acrylic / rubbery look to it compared to a normal crystal case, but then again, also the pictures are quite blurry.
Click to expand...
Click to collapse
No its not a crystal case. Its a silicon resin case thats somewhat elastic. Yeah those pics are blurry but thats the best I can do for now since I used my G1 to take the shots.

boomer30 said:
I ordered this on Feb 12 and got it today Feb 16, would of probably been faster if it wasn't for the weekend and Presidents day.
Unlike my first of the same color with checkered marks, this one is clear and smoke colored, Fitment is fine, putting it on for the first time was a tight fit but it will give you the peace of mind that once its ON, its ON forever and this sucker isnt going anywhere. Fitment is perfect and all holes line up. What I like most about this is that it extends over the Camera lens unlike the previous one in which there was no protection at all.
I like it and will be ordering from these guys in the future.
www.googlenexusoneaccessories.com for $12.99, price might be a little high but I am very satisfied.
Click to expand...
Click to collapse
Didn't see a "resin" case on the site. Is it the "candy skin case?"
googlenexusoneaccessories . com / nexus-one-candy-skin-case-8857.html

pongalong said:
Didn't see a "resin" case on the site. Is it the "candy skin case?"
googlenexusoneaccessories . com / nexus-one-candy-skin-case-8857.html
Click to expand...
Click to collapse
Just looked at the invoice and its listed as :
NEXUS ONE CANDY SKIN CASE - TRANSPARENT SMOKE
you will not regret buying this.

How does the feel of the case compare to the Checkered/Argyle smoke case? That's the case I have right now, and I would definitely be interested in upgrading if the material feels the same.

Ordered yesterday and awaiting ship notification.

Does this still work if you put it in the dock?

Just ordered. Waiting for shipping conf. I got the clear candy one. I like the look of the N1 so if I can show it off as much as possible great.
I am getting this mostly for the grip and feel. Though it is nice it will protect it.

madforpancakes said:
How does the feel of the case compare to the Checkered/Argyle smoke case? That's the case I have right now, and I would definitely be interested in upgrading if the material feels the same.
Click to expand...
Click to collapse
This one has a more sturdier feel to it, but its just as flexible.

McFroger3 said:
Does this still work if you put it in the dock?
Click to expand...
Click to collapse
No it will not work on a dock, if you have no plans of using a dock then this is the way to do. I dont think that there are any cases out there that will work with the Nexus dock.

Would the case block the camera lens?

The case does not block the camera lens. There is a small opening over the center of the glass lens so while the lens is protected from most scratches I haven't seen any effect on pictures (thought I haven't taken many). One thing i noticed though is that the small opening seems to attract dust which is hard to wipe off. A can of compressed air solves that problem though.

Think I might just order this one, using the checkered case right now and would love the cover for the camera lens.
BTW, there's a 15% off coupon for this website. Just use the code "nexus15". (w/o quotes).
Makes the total $11.04.

Is this better then the crystal cases?

How much thickness does this add to the phone? I am interested in some protection for my nexus, but don't want to double its thickness like many of the rubber cases do.

Just received the case. Here are the goods:
Fits perfectly
Protects the camera without ruining pictures
Flexible rubbery plastic provides good protection
And the bad:
Couldn't get it to fit properly with my phantomskinz
Harder to get the charger to plug in (inserted at slight angle)
Overall it's very good. It'll protect against most falls but you'll still need a screen protector. It fit over my phantomskinz snuggly but the skin and the case kept rubbing and sticking together making it difficult to install properly (some of the alignment was off) so I opted to remove the back parts of my skin - now it fits perfectly.

-And the bad:
---Harder to get the charger to plug in (inserted at slight angle)
I can confirm this. Nothing a little exacto work couldn't fix though

It looks so good, does it fit to the phone?

Related

Google Nexus One Pure Crystal Slip?

Anyone used this case? I REALLY don't want to put a case on my Nexus One, but it's also so slim and thin that I am going to drop it eventually.
Silly as it is, I don't want the whole phone covered up, so while the Innocase Surface II looks decent it also covers up the phone.. The Boxwave Pure Crystal Slip doesn't, but I can't find any reviews on it.
Anyone used one of these things? I don't use the dock, although I do use a horizontal belt case so I might have to get one that's slightly bigger as the N1 barely fits in the existing one, but I can deal with that.. That would happen for any case honestly, except for a skin.. I do like Best Skin Ever, but the last two I've bought seem to not be quite as "tacky" as the first few I had, therefore the grip wasn't quite as good. Maybe my imagination..
I bought the Boxwave case off amazon a month ago probably. its a nice case but save your money and buy a resin case from dcmugen on ebay, exact same thing with a different logo. its a nice case though, not too thick and easy to take on and off (I use both docks) so it fits my needs quite well.
Boxwave here. Nice thin and classy. Has rubber feel but not too soft either. It's a pretty good case makes phone look ten times better in my opinion. Is easily recommend it, but I don't use docks, so can't help there. Never the less, happy casing.
DC Mugen FTW. eBay - Epik Case. I got two cases for $8 including shipping and two screen protectors.
check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)
stiCk.E said:
check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)
Click to expand...
Click to collapse
Ah, I see.. I still think I prefer the Pure, no patterns on it, but otherwise the same.. Looks like Boxwave has the Cyclone (circle patterns), diamonds, a matte finish, some others..
Still haven't decided on which case.... I've always been disappointed in silicone cases, but I've almost always bought cheap $2 eBay ones..
I went with the Boxwave Pure Crystal Slip, we'll see when it arrives! God knows when, I had two shipping options.. 5-10 days ($2) or 1-3 days ($23!!)
So I'll see in 5-10 days
I got the Clear Pure Crystal Slip yesterday. Here's a quick review:
Overall, I like it and will likely use it when I'm out and about. It gives a much more secure grip on the phone without adding any weight or feeling larger. Although honestly I still think the Nexus One is a little TOO thin and a little slippery. This makes that better.
It feels like a cheap case, it's rubbery and smooth. If your hands are wet or oily it might be MORE slippery, don't know yet. In reality it seems pretty well made, and fits well. The Clear Pure version is crystal clear, no tint, no patterns, and you can clearly see the phone is a Nexus One.
I'm not doing any drop testing, but I think if the phone landed on a corner or an end this case could protect it. It's firm but pliable, not squishy like a silicone case and not a hard case. Primarily I think it'll protect it because it'll be LESS LIKELY to get dropped because the surface is a tackier and more surface area on the sides. I can pick up the phone with two fingers securely now, where before I'd have to tilt the phone up and get fingers under it to pick it up.
If anyone wants pictures I can do that, haven't yet...
Price summary: If it were $15 it'd be a deal. $20 seems too much.
Pros:
You can see see it's a Nexus. Google branding, colors, body build
It's thin, firm, and fits tightly
Covers up the power and volume buttons, but made to fit over them. Maybe a little rain resistance?
Adds better grip, more confidence holding the phone
Does not interfere with any ports (except a little on the power plug, see below)
Does not interfere with any openings (speaker, mics, camera, camera flash)
Does not interfere with the screen, particularly near the edges
Does not obscure the speaker when phone is on its back
Lets you lay the phone down face-down without resting on the trackball
Covers all corners, edges, entire back.
Cons:
It has a molding line all around it.. It's not that visible but you can feel it. Sides aren't smooth
Covers up the power and volume buttons, but made to fit over them. Makes it too easy to hit the buttons, and you can't feel the button very well (to feel it when touching) nor feel the action of the button itself.
Seems to make the stock charger plug (maybe others too) not feel "in", I think there's too much material around the plug
Takes away the nice texture and feel of the Nexus One
Thumb hits the case a little scrolling down on the trackball, but it doesn't make it harder to use
Other notes:
Does not protect the camera lens or the screen at all
Mine was clearly used, fingerprints all over and in the box backwards :/
A slim belt case intended for the N1 is too small to fit with this case
There is a weird cutout to the left of the HTC logo in the case, like maybe a hand strap could go there?
akifbayram said:
That case does look nice but 20 dollars seems a bit excessive. Look at other Amazon items. I found one for 5 dollars shipped that is pretty similar and doesn't have the hole in the back. http://www.amazon.com/Google-Crysta...X1DSC0SAJ94E&s=generic&qid=1275242975&sr=1-27
Click to expand...
Click to collapse
I have that case as well as the Crystal Boxwave slip.
The Boxwave one:
- Is clearer obviously (not the "smoked look").
- Fits a good deal tighter.
- Has a full cover for the lip, not the chin strap method of attaching.
- Has Boxwave written across the back.
I actually prefer the patterned one because it's more interesting, both detract from the Nexus, so it might as well add some flavor, right? The Boxwave one is far tighter fitting (and slightly thinner) but neither is going to come off in any kind of normal use. I also own the desktop dock, so I need to take it off on occasion to allow the phone to fit. Both cover all the buttons, so you have to get used to pressing them through the rubber. They also both have that edge around the edge of the case from being molded.
Anywho, just my $0.02
akifbayram said:
Speaking of 2 cents...there are a lot of auctions for the patterned Nexus One cases for 99 cents. http://stores.ebay.com/Cimo-Cases_G...15QQ_sidZ192097565QQ_trksidZp4634Q2ec0Q2em322 I wish I knew about this before
Click to expand...
Click to collapse
And those are probably worth at least $1.10...... Sometimes you really have to make a minimal investment to get something useful.

The king of ultra slim cases is actually NOT Spigen as I initially thought... RINGKE!

So as many of you waiting for your pre-orders last week I went ahead and looked for an ultra slim case for everyday use. Spigen seemed to be a household name and went ahead and bought their Ultra Fit for $10:
http://www.amazon.com/gp/product/B00I3ULRZG
I was satisfied with it, matte white, fit perfect and snug, protected the back camera and sensors when placed on a table, nothing to complain about. I had thrown out the screen cover because the cut outs were not precise at all, in fact there was no cut out for the upper sensors, only for the home button. Why would i ruin front camera quality with the screen protector over it? yuck.
I then came across Ringke Slim. I have never heard of them before but judging by their high number of reviews, it seemed that they were well versed as well in the case game. at this time i also wanted to get an electric blue case because i got tired of plain white super quick. Also, the screen protector actually had the PERFECT cut out for all sensors and front camera. This was super impressive to me and I gladly put it on even though I don't care much for screen covers in general. This is what i ordered for $9 including shipping:
http://www.amazon.com/gp/product/B00IPKHP64
Well i received it today and WOW it was made of a far superior plastic. It wasn't because it was thicker but it felt very different. it felt more denser, less paper like. i compared tapping each and the Spigen was very "airy" felt cheap and very "hollow" (best way i could describe it). The sides were completely covered as opposed open which isn't a bad thing but it did feel more complete as a case. Cut outs were perfect as well and charging hasn't been a problem. I quickly realized the Spigen case is actually not as great as I thought now that I had something to really compare it to. I started seeing on the Spigen where the plastic was punched out of the mold (check picture).
Anyways enough talk here's the pictures:
http://dl-1.va.us.xda-developers.co....jpg?key=nBsLK_haY5suFrjdcOa0hA&ts=1397604778
And the gallery plus the Spigen white case for comparison. Notice the inside of the Spigen, wasn't even spray painted completely most likely because they used a clamp to spin it while spraying
http://imgur.com/a/MxMFH
As you can tell Ringke > Spigen in the affordable ultra slim case category.
chillsen said:
So as many of you waiting for your pre-orders last week I went ahead and looked for an ultra slim case for everyday use. Spigen seemed to be a household name and went ahead and bought their Ultra Fit for $10:
http://www.amazon.com/gp/product/B00I3ULRZG
I was satisfied with it, matte white, fit perfect and snug, protected the back camera and sensors when placed on a table, nothing to complain about. I had thrown out the screen cover because the cut outs were not precise at all, in fact there was no cut out for the upper sensors, only for the home button. Why would i ruin front camera quality with the screen protector over it? yuck.
I then came across Ringke Slim. I have never heard of them before but judging by their high number of reviews, it seemed that they were well versed as well in the case game. at this time i also wanted to get an electric blue case because i got tired of plain white super quick. Also, the screen protector actually had the PERFECT cut out for all sensors and front camera. This was super impressive to me and I gladly put it on even though I don't care much for screen covers in general. This is what i ordered for $9 including shipping:
http://www.amazon.com/gp/product/B00IPKHP64
Well i received it today and WOW it was made of a far superior plastic. It wasn't because it was thicker but it felt very different. it felt more denser, less paper like. i compared tapping each and the Spigen was very "airy" felt cheap and very "hollow" (best way i could describe it). The sides were completely covered as opposed open which isn't a bad thing but it did feel more complete as a case. Cut outs were perfect as well and charging hasn't been a problem. I quickly realized the Spigen case is actually not as great as I thought now that I had something to really compare it to. I started seeing on the Spigen where the plastic was punched out of the mold (check picture).
Anyways enough talk here's the pictures:
http://dl-1.va.us.xda-developers.co....jpg?key=nBsLK_haY5suFrjdcOa0hA&ts=1397604778
And the gallery plus the Spigen white case for comparison. Notice the inside of the Spigen, wasn't even spray painted completely most likely because they used a clamp to spin it while spraying
http://imgur.com/a/MxMFH
As you can tell Ringke > Spigen in the affordable ultra slim case category.
Click to expand...
Click to collapse
Agreed, i bought both through amazon, and while i didnt care to use any of the screen protectors the Ringke is MUCH better and really sleek looking. Material kind of feels like the back of the phone and even looks like the back. Only downside is i hate trying to get the freaking waterproof flap out at night! Grrrr
I too have this case and am liking it.
It is hard to hook your fingernail to get the charging flap open although I assume most cases will be similar.
Ok...I'll jump aboard. I bought two cases before I got the S5 in my hands. One was the Ringke and the other was the Spigen Tough Armor.
While the Tough Armor is a very solid case and looks great, it makes the S5 feel like a brick in my hands. On the other hand, the Ringke Slim has a similar texture and gripability as the S5 naked. It doesn't even feel like the device has a case on it at all.
Nice! Defo would give Spigen a run for its money! Great to see competition here and there. At the end, we, the consumers, would benefit on it. More options, right?
Yea I just orderd 2 new Ringke cases. Ill post em up when they comr in tomorrow
Sent from my Nexus 7 using Tapatalk
thanks for this review man. Was about to order a spigen case and then saw this and after a little more research i just ordered the ringke. I went with the Dot black, I'll post up some pictures to compare with other colors once it comes in.
I got the DOT black I ordered from their site and got the case plus screen protector for $10 with free shipping
Sent from my GT-I9505G using xda app-developers app
I got this case delivered today.. It is AWESOME and for 5 bucks it was a steal.. I crumbled up the useless screen protector and threw it out
I should have gotten white though, because my phone is white and I got the blue color. It kind of looks funny.. I thought blue and white would look good.
It doesn't
I got the spigen neohybrid case and their glas.tr slim glass screen protector. Had literally the same setup on my s4 lol same yellow trim too
Sent from my SM-G900T using Tapatalk
Paulenski said:
I got the spigen neohybrid case and their glas.tr slim glass screen protector. Had literally the same setup on my s4 lol same yellow trim too
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
I love that spigen hybrid case, SEXY!! but I went through 3 F-#@[email protected]# plastic sleeves, they always broke on the bottom eventually.
So the screen protector is garbage
Sent from my GT-I9505G using xda app-developers app
chillsen said:
So as many of you waiting for your pre-orders last week I went ahead and looked for an ultra slim case for everyday use. Spigen seemed to be a household name and went ahead and bought their Ultra Fit for $10:
http://www.amazon.com/gp/product/B00I3ULRZG
I was satisfied with it, matte white, fit perfect and snug, protected the back camera and sensors when placed on a table, nothing to complain about. I had thrown out the screen cover because the cut outs were not precise at all, in fact there was no cut out for the upper sensors, only for the home button. Why would i ruin front camera quality with the screen protector over it? yuck.
I then came across Ringke Slim. I have never heard of them before but judging by their high number of reviews, it seemed that they were well versed as well in the case game. at this time i also wanted to get an electric blue case because i got tired of plain white super quick. Also, the screen protector actually had the PERFECT cut out for all sensors and front camera. This was super impressive to me and I gladly put it on even though I don't care much for screen covers in general. This is what i ordered for $9 including shipping:
http://www.amazon.com/gp/product/B00IPKHP64
Well i received it today and WOW it was made of a far superior plastic. It wasn't because it was thicker but it felt very different. it felt more denser, less paper like. i compared tapping each and the Spigen was very "airy" felt cheap and very "hollow" (best way i could describe it). The sides were completely covered as opposed open which isn't a bad thing but it did feel more complete as a case. Cut outs were perfect as well and charging hasn't been a problem. I quickly realized the Spigen case is actually not as great as I thought now that I had something to really compare it to. I started seeing on the Spigen where the plastic was punched out of the mold (check picture).
Anyways enough talk here's the pictures:
http://dl-1.va.us.xda-developers.co....jpg?key=nBsLK_haY5suFrjdcOa0hA&ts=1397604778
And the gallery plus the Spigen white case for comparison. Notice the inside of the Spigen, wasn't even spray painted completely most likely because they used a clamp to spin it while spraying
http://imgur.com/a/MxMFH
As you can tell Ringke > Spigen in the affordable ultra slim case category.
Click to expand...
Click to collapse
Got anymore images? Link doesn't work for me!
I like the case. It feels good in your hand when you hold the phone.
One thing though, on my case the lip around the chrome front trim sides covers more than the lip on the top and bottom. At first I thought I didn't snap it in all the way but it seems like that's just the way it is? Is that how it fits for the rest of you that already have the case?
pgibbons said:
I like the case. It feels good in your hand when you hold the phone.
One thing though, on my case the lip around the chrome front trim sides covers more than the lip on the top and bottom. At first I thought I didn't snap it in all the way but it seems like that's just the way it is? Is that how it fits for the rest of you that already have the case?
Click to expand...
Click to collapse
That's how they all are. Actually I really like this design. It's almost as if its spring loaded, its smaller than our phone, it doesn't just fit like a glove, its actually too small. But the cut outs on the top and bottom allow the plastic to "flex" basically its as if its gripping the hell out of phone, holding into place.
The Spigen hybrid I had for my GS4 was awesome looking, but broke all the time (plastic by the bottom) in anycase, this one is just as nice IMO.
Doesn't add much thickness at all, but will save it from a drop and the camera while on a desk.
If anyone is wondering, I just dunked my phone for 30 minutes with this case. So it doesn't effect the IP68(yea, I said 8, because this thing is pretty much water PROOF) rating.
http://m.aliexpress.com/item/1720284970.html
What are the odds of these cases being fake
Sent from my GT-I9505G using xda app-developers app
@chillsen Hey OP, after I read your 1st psot I figured id give it a shot. I've had bad experiences with her cases and the one that you posted a pic of, is the same one I got as well. I got it 3 days ago, and still haven't put it on, in fear it will scratch the outer bezel while putting it on, and taking it off
Have on had this issue at all? Seems like a real snug fit, thought if ask before I pushed my hone into the car lol.... Thanks bud!
Sent from my SM-G900P using Tapatalk
reverepats said:
@chillsen Hey OP, after I read your 1st psot I figured id give it a shot. I've had bad experiences with her cases and the one that you posted a pic of, is the same one I got as well. I got it 3 days ago, and still haven't put it on, in fear it will scratch the outer bezel while putting it on, and taking it off
Have on had this issue at all? Seems like a real snug fit, thought if ask before I pushed my hone into the car lol.... Thanks bud!
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
i can only say i've had to take the case off and on many times to show off to my friends how thin the actual phone is. i mastered how to take it off by pressing outwards the top left corner. you push it out enough so you can fit a finger through and i just slide it down the side and the whole case pops off. this is the easiest way i found. at first i had a problem because i didn't try a corner but started from the middle of the long side. but to answer your question, no scratches.
LeKtRiCzzz said:
http://m.aliexpress.com/item/1720284970.html
What are the odds of these cases being fake
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
I'm 100% sure they are fake. Look at the feedback page, it's full of "Excellent!" and "good quality" multiple times by the same few user accounts.
I just got this delivered today with the white dot pattern. I also ordered the wireless charging back the other day, definitely don't think wireless charging will work with this on - what an idiot I am.

Review: MoKo [Heavy Duty] case for Nexus 6P Huawei

Hi guys,
I finally got around to doing a review on the Moko Heavy Duty Case for my 6P. I ordered this on amazon.ca. I've rocked this case for about a week now since I did that video, and I am pleasantly surprised.
The cutouts are precise, and the case does not look or feel cheap. The fingerprint scanner is easy to use still as well. The plastic is pretty soft, and I don't think it would stay on on its own without the black shell, but it does fit perfectly. Also, didn't notice much pocket lint or anything else sticking to it like some have reported. Overall it's a great option for a more rugged case for the Nexus 6P, especially here in Canada, where the options can be sparse. Here's the link from amazon.
Nexus 6P Case - MoKo [Heavy Duty] Full Body Rugged Holster Cover with Swivel Belt Clip - Dual Layer Shock Resistant for Huawei Google Nexus 6P 5.7 Inch Smartphone 2015, PURPLE https://www.amazon.ca/dp/B00JP6J1A0/ref=cm_sw_r_other_awd_HnYMwbXKYG11S
11 bucks plus tax, and since I have PRIME, also got free 2 day shipping. Yes, I have a compulsive online shopping problem...
I will also post reviews for my Spigen Rugged Armour and a Poetic Revolution cases shortly.
https://youtu.be/k2k6gPdRPUY
Sent from my Nexus 6P using Tapatalk
I've got one in blue but I don't use it anymore. It's a pretty nice case and the quality is fantastic I just wish they would stop putting those huge bumps on the back for no reason. They serve absolutely no purpose and double the thickness of the phone. They do this on these cases for all phones and just still makes no sense.
RED ZMAN said:
[...] I just wish they would stop putting those huge bumps on the back for no reason. [...]
Click to expand...
Click to collapse
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
daniels220 said:
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
Click to expand...
Click to collapse
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
RED ZMAN said:
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
Click to expand...
Click to collapse
I have the black version. Based on the pictures on Amazon the colors looked like they'd be pretty in-your-face, especially since the highlight color is visible directly around the edges of the screen. I'm afraid I don't have any holsters—I've never used one.
I realize, I forgot to mention the most important thing! The headphone and USB-C cutouts on this case, as shipped, are not large enough for most cables. The stock USB-C cable fits but scuffs the sides, many high-quality third-party cables won't, and the only headphone plugs that will fit are the super-tiny ones that some headphones have for exactly this reason. But! If you have a decent utility knife, some courage, and a steady hand, it's possible to enlarge the cutouts without messing up the case. (I cut away a tiny bit of the TPU near the jacks as well, since it was being deformed when plugging in a cable.) With this done it works beautifully—the case is even thin enough to use a Square credit-card reader in the headphone jack.

Case or cover

Availability seems to be low on cases for the Nokia 8 so far.
I'm a cluts so not going to take my 8 out of the house before I get a sturdy case for it.
I saw one article that listed 5 cases but availability seems bad so far.
I bought a lenuo (I guess it's called that) case from ebay and it feels good enough for now. A smart case of some kind would be nice to have though...
I ordered Nokia 8 in Tempered Blue and official Nokia leather flip case in brown color. We will see if it is any good. I will post the pics after weekend.
i got Nokia 8 in polished copper and 2-3 tiny TINY scratches bother me and i am looking for a clear case any ideas?
p.s. anyone that uses cases has issues with the power and volume rocker buttons?
I received oem Nokia Leather case (CP-801)
The quality is top of the line if someone likes this type of covers. I am not a fan for it but it was a gift for family member and I rate the quality 9/10. The only thing it lacks is like magnetic attachment to the screen like ipad cover. Nokai cover is slim, well cut out and really well made. I was a bit skeptical, I am not a fan of leather cases but you will probably not be dissapointed spending 40EUR for this.
I got this case off Amazon: https://www.amazon.com/gp/product/B074347Y6M/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
I've always gone for clear bumpers on my phone, rather than opaque or solid cases. This case adds a neat textured pattern over the back of the phone, it blends very nicely with the edge of the screen, and all the buttons/connectors are easy to use. The clearance on the rear mic could be a bit better, now that I look at it, though. There's one spot where I can feel the injection port from the mold, but it doesn't bother me that much and would be easy to smooth out if it did. That link is actually for two pieces, so I have a spare if I need it.
I don't use cases ... No sense in buying beautiful phones and hiding them in cases ... Got transparent full body polyurethane protection installed ... Even makes the phone more grippy
drrajkhurana said:
I don't use cases ... No sense in buying beautiful phones and hiding them in cases ... Got transparent full body polyurethane protection installed ... Even makes the phone more grippy
Click to expand...
Click to collapse
Totally agree with that sentiment. My brother has an SG7 installed in some sort of brick and it looks awful. Enjoy your phone as it was meant to be.
I just ordered the cc801. I find this phone to damn slippery without a case.
drrajkhurana said:
I don't use cases ... No sense in buying beautiful phones and hiding them in cases ... Got transparent full body polyurethane protection installed ... Even makes the phone more grippy
Click to expand...
Click to collapse
Of course it makes perfect sense.
First, not everyone really care about the phone looks. Some people and this may come as a surprise, buy phone to use telephony, messages, audio or video, web browsing.
Second, beatiful phone is meaningles if you can not protect it and scratch it or worse, damage your screen. So much for staring at naked aluminium unibody with cracked screen.
one of the cases which looks to me like it may provide more protection is this following one: (I haven't tried it myself and I don't even have the phone but interested in it so did the research)
https://www.amazon.com/TUDIA-Slim-Fit-EXTREME-Protection-Rugged/dp/B074TB59BH?th=1
someone made a short video review of it (thank you sir)
https://www.youtube.com/watch?v=lbhmhS4wHs8
I got my Nokia 8 last night and ordered a couple of cases to try out.
This one is incredibly slim, barely a few mm thick and has a slightly raised lip. Not sure how it would handle a fall onto a hard surface, but certainly does not add much bulk whilst still offering some level of protection. It is a hard case - not a gel so a bit tricky to take off. The one thing I really dont like is the ugly J&D logo on the back.
I also got this one - which is more substantial gel case - looks nicer and feels more protective. But then it adds that bit more bulk.
I am a bit butter fingers so whilst I see the argument about not having a case - if I did not have one, my current HTC 10 would have been smashed by now.
harryw66 said:
I got my Nokia 8 last night and ordered a couple of cases to try out.
This one is incredibly slim, barely a few mm thick and has a slightly raised lip. Not sure how it would handle a fall onto a hard surface, but certainly does not add much bulk whilst still offering some level of protection. It is a hard case - not a gel so a bit tricky to take off. The one thing I really dont like is the ugly J&D logo on the back.
I also got this one - which is more substantial gel case - looks nicer and feels more protective. But then it adds that bit more bulk.
I am a bit butter fingers so whilst I see the argument about not having a case - if I did not have one, my current HTC 10 would have been smashed by now.
Click to expand...
Click to collapse
HTC 10 is a tank it'd take a sledge hammer to damage it.
Update: In the end I settled on this cheap and cheerful clear gel case. Sent the other two back.
I think it will do the job well, provide reasonable protection without being too bulky - and lets the nice Silver colour of my Nokia 8 shine through.
And when it starts yellowing after while I can just order another - given the low price...
The Official Nokia 8 Soft Touch Case Black - CC-801 - looks great - but currently costing around £25 to £30 - which is over the top for what it is....
Guys, also if you interested for an official case from nokia you can find it here
https://www.uk-mobilestore.co.uk/official-nokia-8-hybrid-crystal-case-cc-701.html
I received and its an official case from nokia... unfortunately i haven't test it yet because i don't have the phone yet.
But feels sturdy, the back is hardened and the sides are a little bit more soft for the buttons
Here some pics (sorry for the crappy quality, still using a nexus 4 from 2012)
Paladin987 said:
Guys, also if you interested for an official case from nokia you can find it here
https://www.uk-mobilestore.co.uk/official-nokia-8-hybrid-crystal-case-cc-701.html
I received and its an official case from nokia... unfortunately i haven't test it yet because i don't have the phone yet.
But feels sturdy, the back is hardened and the sides are a little bit more soft for the buttons
Here some pics (sorry for the crappy quality, still using a nexus 4 from 2012)
View attachment 4338238 View attachment 4338239
Click to expand...
Click to collapse
:good:- I spotted this also last night. But it was out of stock, but I found one in stock on Amazon UK. Ordered it to check out - as I often find official cases are slimmer / better fit than 3rd party.
Just arrived, two original Nillkin cases for Nokia 8. Paid $15 for both (purchased from AliExpress).
The red color is a bit darker than the tone visible in photo. The official renders from Nillkin also shows the red color to be bright but in reality it is a shade darker.
I have used other cases as well but this is hands down the best back cover for Nokia 8 because of one reason. The case is curved from edges exactly the same way as Nokia 8 is built. The curves start from frontal edges of the case and goes to the backside of case. It is hard to explain in words.
Other back covers make Nokia 8 blocky as they have standard squarish edges. But this one feeks like a second skin for the phone as it preserves original curved design of the phone while being slim, lightweight and sturdy.
I always get Nillkin cases for my phones because their quality is top notch and their attention to details is exceptional. They also have been unbreakable for me so far.
Hello guys is there anyone using this case? Or anything to say about that?
https://www.amazon.com/gp/aw/d/B075...er+nokia+8&dpPl=1&dpID=41O0-3xnbqL&ref=plSrch
I always buy Nillkin cases for my phones, but it wasn't available for the Nokia 8 when I needed it. After trying a couple of cheap ones I ended with the an official Nokia 8 cover which is fantastic:
I got leather flip case from stilgut.de. very nice.

Budget friendly minimal 3a case

I have no relations to the company, just found it on Amazon and bought it. It doesn't add that much drop protection but adequately protects it for being so slim. It fits like a glove and doesn't cover the buttons or flex out on the sides.
https://smile.amazon.com/SteepLab-Super-Slim-Minimalist-Case/dp/B07VCJ5DMW/
Pinktank said:
I have no relations to the company, just found it on Amazon and bought it. It doesn't add that much drop protection but adequately protects it for being so slim. It fits like a glove and doesn't cover the buttons or flex out on the sides.
https://smile.amazon.com/SteepLab-Super-Slim-Minimalist-Case/dp/B07VCJ5DMW/
Click to expand...
Click to collapse
Can you provide some photos pf your phone and how it looks like with the case on?Cause i want the mnml case but what they charge is insane if you think how its made.So if it looks good i can buy the one u posted
JimboTheDeveloper said:
Can you provide some photos pf your phone and how it looks like with the case on?Cause i want the mnml case but what they charge is insane if you think how its made.So if it looks good i can buy the one u posted
Click to expand...
Click to collapse
Hello,
It looks exactly like they pictured, or like the minimal 3a case, there is a very slight, finished seem on the side that you cannot feel by hand but is there if you inspect it up close.
Pinktank said:
Hello,
It looks exactly like they pictured, or like the minimal 3a case, there is a very slight, finished seem on the side that you cannot feel by hand but is there if you inspect it up close.
Click to expand...
Click to collapse
I dunno how it will look ona white pixel 3a xl thats why i asked,if you have a black pixel then ignore my rumbling XD
I do indeed have a black one but you can search mnml case on white pixel 3 on Google to get an idea. The only slight issue with the case is that the camera lip blocks the led out put on one corner by the tiniest bit. I'm guessing that most would not have noticed, but I work with cameras and image control for a living.
Spigen Rugged Armor case. Pretty minimal, but does provide decent protection. Only $10.99 on Amazon (Prime eligible). I've had this case on the last 3 phones I've owned and I've never had damage from a drop with any of them.
yeah, i second the spigen . caveat is i have only been using a week and have not dropped it yet , so no idea about level of protection. but as a minimal it wins as far as my tastes go.
Pictures make the Spigen look bulky compared to SteepLab or Mnml
waingro808 said:
Pictures make the Spigen look bulky compared to SteepLab or Mnml
Click to expand...
Click to collapse
I think the pictures are deceiving. The Spegin case does wrap around the phone just like any other case, but it is not thick at all. The rubber is perhaps 1mm thick on the sides where the phone is the widest. The top lip may be slightly thicker (which is what you see in the pictures) but it doesn't add any addition size to the phone because it is where the phone is rounded anyway. The back is slightly thicker - perhaps 1.5mm.
sic0048 said:
I think the pictures are deceiving. The Spegin case does wrap around the phone just like any other case, but it is not thick at all. The rubber is perhaps 1mm thick on the sides where the phone is the widest. The top lip may be slightly thicker (which is what you see in the pictures) but it doesn't add any addition size to the phone because it is where the phone is rounded anyway. The back is slightly thicker - perhaps 1.5mm.
Click to expand...
Click to collapse
I bought this Spigen case. I agree that it is not too bulky but it does add a lot of weight... The phone goes from 146g without the case to 178g with the case and it does feel heavier.
The Spigen case is pretty legit. In my opinion it isn't terribly bulky. I've been using it for around 3 or 4 months maybe? Which is how long I've had the phone for. Offers pretty good protection. Gone through a good amount of drops, phone is commonly abused by a toddler, and no sign of damage anywhere.
I'd opt for a slimmer case, but the phone being very probe to being abused by a toddler makes me opt for something with more protection haha.

Categories

Resources