Database Info

Newb here with a question

Okay guys,
I have my phone rooted and I have the following loaded:
ota-radio-2_22_19_26l.zip
JFv1.50 ADP1.5
I also have my apps going to my sd card via the guide on here.
I was going to load a custom image and I realized that I didn't have the correct bootloader which I THOUGHT I loaded when I loaded JFv1.50...
It says on my bootloader that I have:
DREA100 PVT 32B
HBOOT-0.98.0000
RADIO-2.22.19.26i
The background of it is red,green, blue, and white...
I thought that I loaded the new bootloader(hardspl) when I rooted my phone before, but I guess I didn't ??? I thought the JF build wouldn't install unless it did...
Can I simply just upgrade it to the new bootloader or will I need to do EVVERYTHING starting from rc29 again ?

Perhaps someone will have better advice, but mine would be to reflash the NBH and then reflash JF's ROM

hardSPL can be flashed without otherwise changing your system
just use utmost caution to ensure the checksum of the update file ON YOUR SDCARD is identical to what is says in the SPL thread. Check it inside the terminal on the phone itself.
also, there is always a chance that flashing an SPL could harm your device.

mhsbrian said:
Okay guys,
I have my phone rooted and I have the following loaded:
ota-radio-2_22_19_26l.zip
JFv1.50 ADP1.5
I also have my apps going to my sd card via the guide on here.
I was going to load a custom image and I realized that I didn't have the correct bootloader which I THOUGHT I loaded when I loaded JFv1.50...
It says on my bootloader that I have:
DREA100 PVT 32B
HBOOT-0.98.0000
RADIO-2.22.19.26i
The background of it is red,green, blue, and white...
I thought that I loaded the new bootloader(hardspl) when I rooted my phone before, but I guess I didn't ??? I thought the JF build wouldn't install unless it did...
Can I simply just upgrade it to the new bootloader or will I need to do EVVERYTHING starting from rc29 again ?
Click to expand...
Click to collapse
I think that you need to redo the hardSPL again. Just make sure you read and re-read it before you do it. It's been a long time since I did it but mine read:
Dream PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CLPD-4
RADIO-2.22.19.23 [--I like this radio the best]
Hope this helps

Thanks guys !!!
Got it flashed and everything works great !!!

mhsbrian said:
Thanks guys !!!
Got it flashed and everything works great !!!
Click to expand...
Click to collapse
I was gonna suggest that haykuro just released a new version of the hardspl that almost doubles the system partition. 89mb of internal mem!!! Since you were flashing anyways. U can find it on his blog.

[HOW TO] Getting OTA updates working again...

Hi guys,
I've searched the forums and I can't find a solution for a problem I'm having. I have successfully rooted and played around with different flavors of Hero ROM's and optimized kernels. But, I would like to revert back to the original Vodafone UK ROM (I have a nandroid backup of it, done right after rooting the device). I have restored the ROM but for some reason, OTA updates never install. The ROM I have backup'ed is CRB17 and I know the latest is CRC1. Using the System updates menu in Android, I download the update, but it doesn't install, it says that I need to reboot, which I do and nothing happens.
How can I get the original unrooted: HBOOT-1.33.0004 (SAPP10000) : Sapphire PVT 32B SHIP S-ON G : CPLD-10 (Voldafone NL + UK + Australia)? I have a friend that hasn't rooted his Magic, how can I get his SPL?
So far, what I've done:
- installed Engineering SPL HBOOT-1.33.2004 Signed update.zip and restored the original recovery for Sapphire that Haykuro has around (when I nandroided my original ROM, I had already put in the Cyanogen's recovery tool...) - OTA doesn't work.
- installed Modded HBOOT-1.33.2004 by Crios Signed update.zip and restored the original recovery for Sapphire that Haykuro has around - OTA doesn't work.
Another thing I noticed is that although people say that with Crios SPL, I should be able to do the OTA updates, I can't!
Also, the SPL description says "Sapphire PVT 32B SHIP S-OFF H : CPLD-10", and my original description should be "Sapphire PVT 32B SHIP S-ON G : CPLD-10".
Has anyone been able to make OTA updates working again?
Thanks for your help in this matter, I feel like I've tested everything :\
-------------------------------
EDIT:
OK guys, just got my OTA updates back. You should thank RubenFreitas for the dump of his "virgin" HTC Magic Vodafone UK. This is a 32B device, unrooted, which means you can do OTA's again.
How to restore your device to OTA abilities:
- first you need to put Crios SPL (2004/2005) with S-OFF on your device. (look for instructions on the forum, search for "magic hboot spl").
- fastboot into Amon_RA recovery tool. (fastboot boot recovery.img)
- make a backup of your current rom (don't worry, this is just for getting the file structure into the sdcard).
- After it finishes, reboot your device and mount your sdcard.
- In your sdcard, you'll find a "nandroid" folder, open it, until you see boot.img, etc.
- replace the files with the ones on the file here: www.dymsoft.com/rubenfreitas_Vodafone_UK_ORIGINAL.zip
- fastboot again into Amon_RA recovery tool
- recover your backup (which will now be the original ROM from vodafone).
- reboot and enjoy your OTA again
If for any reason, nandroid restoring doesn't work (your phone does not boot after 15 minutes), you can restore the backup manually in fastboot mode:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata data.img
fastboot flash recovery recovery.img
fastboot reboot

I have exactly the same question!

Just 1 question, why do you desperately want OTA updates?
I mean anything we get on here is likely to be one step ahead of any update our carriers give us, even if we do miss out on something good when it's sent out someone will pick it up on here pretty quickly and pull it apart to make sure we dont miss out.
Just my thoughts, I really wouldn't worry.

It's just the idea that I can't get my device working for 100% again that makes me crazy

Going back to the standard rom is hardly working 100% ..

xyzulu said:
Going back to the standard rom is hardly working 100% ..
Click to expand...
Click to collapse
Smartass ... but still nothing on how to fix this?

Roy_Drage said:
Just 1 question, why do you desperately want OTA updates?
I mean anything we get on here is likely to be one step ahead of any update our carriers give us, even if we do miss out on something good when it's sent out someone will pick it up on here pretty quickly and pull it apart to make sure we dont miss out.
Just my thoughts, I really wouldn't worry.
Click to expand...
Click to collapse
The only reason I want OTA working again is for getting "Donut" update automatically when it comes out, rather than having to wait for it to be available here.
From what I can gather, we can only have OTA if the Magic is unrooted, am I right? According to Crios posts, I should be able to do the OTA updates, but his SPL is for HTC devices, and I have a Google one, although it works fine on my Google. Just the OTA doesn't work.
Anyone knows how to dump the original SPL from an HTC Magic that hasn't been rooted?

dferreira said:
The only reason I want OTA working again is for getting "Donut" update automatically when it comes out, rather than having to wait for it to be available here.
Click to expand...
Click to collapse
I'm sure once it's out it won't be long before it's available on here. Wouldn't surprise me if it was posted here the same day.

Malky1903 said:
I'm sure once it's out it won't be long before it's available on here. Wouldn't surprise me if it was posted here the same day.
Click to expand...
Click to collapse
Wouldn't suprise me if we had it here before!!
I mean they already have the code for most of it anyways. From what I've seen and tried of donut it doesn't even look that great! Possible mulit-touch, well they will mange to pull that out and stick it in a cyanogen rom or something, and a widget for the home screen allowing you to toggle things like wifi etc....
You can get those anywhere off the market, check the widgets on jerpeleas cyanogen rom page. They are really nice.
Read this, doesn't even sound like Donut is going to be version 2.0 of android, more like 1.7 or something:
http://www.engadget.com/2009/07/26/android-team-member-says-donut-isnt-2-0-doesnt-have-multitouc/

To me that really doesn't matter! I just want the possibility to restore my Magic to factory settings with OTA updates!

same question here. Snappiness of the vodafone original rom is the best so far. Have tried all different roms. Problem is, there is an update available i can download it but it wont install.

Still no-one who can fix this? Come on, please... I'm sure you genius' can help us out!

i think i shall be ok haven't peremantly flashed anything no spl updates back to stock vodafone uk rom. only thing i did install was a few hero builds so hopfully ive done no damage to my phone

Imho un-rooting the phone should do the trick, but how can that be done? There are a couple of manuals for the Dream, but they ain't working for the Sapphire.

Can someone please upload the original SPL from Vodafone (NL/UK/AUS)? I'm pretty sure that if we can put that one back on our Magic's, we have our OTA Updates back!
It would be appreciated very much!

Tomorrow I have a friend that has a "virgin" HTC Magic from Vodafone UK I'll try to get his "virgin" SPL and boot and everything.
I found out how we can dump it all into .img files (what nandroid uses). Hopefully, it should get us back OTA updates!
http://forum.xda-developers.com/showthread.php?p=4035680#post4035680

That would be awesome! Great!

Hi DFerreira.... did you manage to get the original SPL?

Not yet... my friend couldn't come to my place. I'll try to catch up with him tomorrow.

I also have an untouched magic here (dutch one from my gf). I just dont know what to do

Help: Can't Flash CM 4.0.2

Heres the info:
Phone: myTouch
Sapphire PvT 32B
HBOOT-1.33.2005
CPLD-10
RADIO-3.22.20.17
Recovery: RAv1.2.0H
When I first rooted my phone I used this tutorial: http://forum.xda-developers.com/showthread.php?p=4314039
I had RA1.0.1H until I wanted to change to CM4.0.2. Upon trying to flash it I got stuck on the Vodafone splash on reboot. I was able to redo everything and now I just have the sappimg ROM on there as I am still trying to get CM loaded.
I tried putting a new SPL on there by using this thread: http://androidforums.com/updates-cupcakes/5662-flashing-new-spl.html . I saw that someone here had the same SPL that I was trying to load and had 4.0.2 on their myTouch and figured it may work. After updating with the new SPL and then updating with CM4.0.2 I still get stuck on the Vodafone splash. Can anyone give me some pointers to what I need to use to get it to work?

FIXED
Well I fixed my own problem after all. I did some more research (or just finding out info I hadnt already known) into my phone and realized that the "Daredevil" part of Amon_RA's rooting tutorial gave me all the info that I needed to install CM4.0.2. I went through the instructions he gave there and now my phone is on the android boot splash (as I was told it takes a few minutes to boot), which is way farther than I've ever gotten with it before.
Maybe Amon_RA should change that to "To Install other ROMs including CyanogenMod" lol.
Booted! I guess Cyanogen will be getting his beers afterall!

Is there no hope for 1.6 users on a UK voda magic?

Hi folks.
I am desperate to get Cyanogens mod on my phone but I can't downgrade to 1.5 because i'm on 1.6 with a UK vodafone Magic (32B).
Any chance a serious andoid expert could step in and tell me:
Will there be a new image made to fix this issue?
is there a method I will understand? It says on the Cyanogen Wiki that there has been "some success" with my version but I can't find where it says how to downgrade for my version
I keep hearing about gold card or summink but i'm a noob and I don't have the foggiest idea where to start.
Please help!! and try to make your responses understandable

Dont worry...
Hi there
I think is possible what you're trying to do, but in order to change your rom you don't need downgrading nowadays (HTC are not PSPs, hehe).
I have a magic from Vodafone ES, and what you have to do first is check your model, can be 32A (HTC) or 32B (Vodafone, less ram in cell phone), so you'll probably have 32B like me.
After this, you need Android SDK and drivers to connect your device usb, load a modified SPL via ADB/fastboot (there's a thread in the forum with the HBOOT collection, you need one of those in your cell in order to change the rom).
Summarizing:
1. check if 32B
2. get Android SDK to use the commands fastboot/ADB
3. replace SPL
4. continue with the cyano's wiki
I followed this: http://www.htcmania.com/showthread.php?t=74683 (sorry is in spanish and a bit outdated, but the apps you need like the SDK are in there, and you have some screenshots, you can skip the root part since cyano's mod is rooted already).
About the goldcard method, I dont know because mine hadn't had perfect SPL, I only had trouble with the usb driver, and downloaded HTC sync (look for it on google if you need) and adb/fastboot detected my device.
A good idea is to install a recovery image once you change your SPL, I personally recommend Amon_RA's recovery 1.5.2.
Last but not least, these explanations are the basics, I know it sounds like chinese to you but read more posts in the forum, there's a cyanogen flashing guide as well, with all the information and these steps you'll do fine.
Hope you'll succeed, let me know your issues

I do understand reasonably well but you cannot use the guide on here with a UK magic as the SAPPH.img file or whatever has an incorrect ID. it's at this point the process cannot be completed.
Thanks so much for your lengthy reply but in this case I believe my phone is unique and the problem cannot be be as easily resolved as you suggest. I must downgrade to 1.5.
Are any of the extreme android geeks able to shed light on this?

I can shed light on you as I have a Vodafone HTC Magic 32B. I used the instructions at the link below and got my phone back to Cupcake, but oddly enough I used the MyTouch instructions and searched online for a suitable sappimg.nbh file as the one they provided didn't work for me. Now I am running Qteknology MagicSense Hero ROM with working LEDs. Forget about ADB, SDK and the Goldcard method... I am sure you want the simplest way to unroot so you can get back to 1.5 and the reroot to whatever you like. Here it is: http://theunlockr.com/2009/10/15/how-to-root-a-donut-phone-android-1-6/

This is great news but I have tried that method with the sappimg.nbh and it says incorrect ID every time.
Are you using a UK vodafone magic then? If so, where did you find a SAPPIMG that worked?
Please try and remember!

It doesn't matter that your phone is a UK Vodafone Magic.. if you google sappimg.nbh and download a few until you get the one you need you will have your phone reverted back to it original state... ready to root. If you stop your search after one attempt you will not have done all you needed to do. You don't have to know any codes or get another SD card.. just put some effort into it from your computer. Google is your friend.

but being a bit of a noob to all this, surely trying sappimg files at random might risk bricking my phone? I heard there was a good sappimg for all but my version of the phone which is why I mentioned it.
Maybe someone on here has a sappimg known to work with my phone?
But yes, i'm off to do some intense googling.
Thanks

Hi
I have a UK Voda Magic and I followed this http://forum.xda-developers.com/showthread.php?t=579328 and worked perfectly for me

It truly is lovely of you all to try and help and I appreciate it but I suspect you have not read my comments properly.
Those of you that have commented here were only able to get it to work because you were flashing from/rooting from a 1.5 cupcake build. Once the OTA 1.6 donut update is on a UK magic it cannot be downgraded and so all comments thus far are superfluous. contrary to other comments it is necessary to flash SAPPIMG.nbh first and this does not work on my phone - incorrect CID.
Is there anyone on here that can help with MY issue?
Thanks.

Strange, because I have no issues flashing UK Voda 1.6 phones, just fastboot and use ADB to load recovery image, then flash whatever 32B ROM I like (Dwangs 1.17.1 is great). I did a work collegues before Christmas and his phone had never been modified, only received the OTA update from 1.5 to 1.6 around October time.

I'm on it. That's the way I used to flash roms back when i first got my magic. Now i've been thrown by all the simple guides to put cyanogen and I thought the sappimg method was the only way. I'll just download the sdk and get on my merry way

I don't understand what the issue is? I have a UK vodafone 32B and have been flitting between CM's mods, Hero mods backwards and forwards with no issues whatsoever?
I'm on CM's latest right now (well, a few back now 4.2.11 latest), just followed the instructions and it worked....?

I certainly did read your OP correctly and I also was on 1.6 when I followed the link I posted. In that link it has instructions on how to do it if you are on 1.5 OR 1.6

Started out with 1.5 Vodafone UK Magic which i've flashed many times using the fastboot boot cm-recovery-1.4.img method.
At one time i went back to stock 1.5 but let it update itself (OTA) to 1.6. Since then i've continued to flash new ROMs without problem.

Alfieg said:
but being a bit of a noob to all this, surely trying sappimg files at random might risk bricking my phone? I heard there was a good sappimg for all but my version of the phone which is why I mentioned it.
Maybe someone on here has a sappimg known to work with my phone?
But yes, i'm off to do some intense googling.
Thanks
Click to expand...
Click to collapse
hi alfieg
ive vodafone magic 32B with donut and perfect SPL, in present day, I tried all the guides and methods in many forums, without success, for example, if you follow the guide in wiki cyano, already the first step there are problems, how I try to update with sappimg. (cupcake 1.5) as the ends' update writes "main version is older," "update failed "... if you do not then a way to get cupcake is impossible to have root on magic 32b with donut and Perfect spl ....
Indeed in the wiki says, if you have donut Downgrading to 1.5 FAILED: HTC Magic Vodafone ES (Spain) (32B) Official 1.6 updated OTA "
wait a few geek we solve the problem ...

I don't see what the problem is. You should have been reverted back to 1.5 and flashing new ROMs. The instructions are simple.. someone else has done all the hard work.. all you have to do is download a file and hold your phone.

blackvyper said:
I don't see what the problem is. You should have been reverted back to 1.5 and flashing new ROMs. The instructions are simple.. someone else has done all the hard work.. all you have to do is download a file and hold your phone.
Click to expand...
Click to collapse
download a file, to make what? If you can not root for real?

Will you lot please listen to me!
There are two methods reccommended:
1) Flash the SAPPIMG.nbh to downgrade back to 1.5 - this does not work on a UK magic on vodafone 32B at all! It reports Invalid CID, update failed!
2) use the fastboot boot cm-recovery-1.4.img via the SDK - This does not work on my phone! - I have the device listed when I use "adb devices" so the drivers are ok but it hangs at <Waiting for device> when i try to fastboot boot cm-recovery-1.4.img!!!!!! No ammount of killing the server and remounting as per the cyano instructions works!!!!! in fact, it wont let me remount (Operation not permitted)!!!
If you don't understand please don't post. People who have not updated to 1.6 OTA and people who don't have a UK voda 32B - stop posting here.
Grrrr

No need to downgrade
Alfieg said:
Hi folks.
I am desperate to get Cyanogens mod on my phone but I can't downgrade to 1.5 because i'm on 1.6 with a UK vodafone Magic (32B).
Any chance a serious andoid expert could step in and tell me:
Will there be a new image made to fix this issue?
is there a method I will understand? It says on the Cyanogen Wiki that there has been "some success" with my version but I can't find where it says how to downgrade for my version
I keep hearing about gold card or summink but i'm a noob and I don't have the foggiest idea where to start.
Please help!! and try to make your responses understandable
Click to expand...
Click to collapse
I have a New Zealand Vodafone Magic 32B and they share the same Hboot 1.33.0004 (SAPP10000) SPL with the UK (and NL and AU) vodafone phones. That means they are VERY easy to load alternate ROMs onto. The horrible stuff many Americans and others have to go through to root their phones isn't required for us.
You do need to get the Android SDK installed and talking properly to your phone.
Assuming you have the SDK set up and you can see your USB-connected phone listed when you enter the "adb devices" command, then the rest should be easy. See the Cyanogen Mod wiki for the details. You want the section on "non-Tmobile 32B magics" on this page:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
It starts with:
"Non-TMobile 32B Magics
If the above doesn't work for you, don't despair. Some non-US Magics are shipped with a fastboot compatible SPL installed. If you see 3 skateboarding androids when you boot to fastboot, you should be able to do the following:"
..............
This is the part you want to pay attention to, assuming you have the SDK installed properly. Our phones are actually MUCH easier to load others ROM on because we have those fastboot-enabled SPLs already in place and this is the first, BEST way for us to do it.
Whatever you do, do NOT flash the "Danger SPL". There is no need to for an HTC Magic with the Hboot 1.33.0004 (SAPP10000) SPL.
If you're hopelessly lost at this point, seek hands-on local help. You don't know enough to do this by yourself without risking screwing up. if no one can help you, then take your time. Learn the stuff you need to know....Being in a hurry is a great way to go wrong. I spent 3 months reading and thinking about it before I loaded my first ROM. Much of the advice is for the Dream / G1 or locked MyTouch3G or Magic 32B phone from telcos who lock them....and simply isn't relevant for the HTC Magic 32B from Vodafone. the single section I'm pointing you to above is all we need to get it done.
Finally, here is my own "simple guide" for getting loading alternate ROMs on a Vodafone HTC Magic 32B. This is about OUR phone...and should work if you work your way through it.
http://truthseekernz.blogspot.com/2009/11/simple-guide-to-loading-new-roms-on.html
You don't need to worry about "gold cards" and all that stuff. You'll be flashing an already rooted ROM and you will have backed up your un-rooted original load with "nandroid" before you change ANYTHING. That backup is your path back to the way your phone was before you rooted it by flashing an already rooted system ROM. in loading ROMs like Cyanogen's you're not baking a cake, you're buying one....so you don't need to know how to make one, you just need to know where to get one and how to serve it....if that analogy makes sense.
Simply, you start by: fastboot boot RA-recovery-1.5.2G.img:
Then, from the recovery menu of functions you do these steps:
1. Backup (nandroid)
2. Wipe system / data
3. Wipe cache
4. flash from any zip on sdcard (the one you want to flash today, you may have put several different ROM images in /sdcard)
5. reboot to brave new world.
6. Make a backup copy on your PC of the /sdcard/nandroid folder on your sdcard so you won't lose it accidentally if your sdcard is corrupted, lost or stolen.
Done.
To save time and let you backup / flash ROMs anywhere you happen to be standing, you can flash Amon-RA's recovery onto your phone or you can load it via fastboot every time and leave the default recovery in place. The very first nandroid backup you made will have backed up the factory recovery image as well as the factory system image as they were at the time you backed them up. So they can be restored if you want to at some point update them with an OTA update. I suspect Vodafone / HTC will be rolling out an Android 2.0 / 2.1 update to Magic phones at some point. If they don't that would be a black mark against them....something to remember when thinking about buying any future phone from anyone: "WILL THEY SUPPORT IT FOR THE SAME 2 YEARS YOU'VE SIGNED UP FOR".
If the answer isn't YES......then that's worth remembering. Vodafone / HTC's record so far is good. The last OTA update was barely 3 months ago.

Alfieg said:
Will you lot please listen to me!
There are two methods reccommended:
1) Flash the SAPPIMG.nbh to downgrade back to 1.5 - this does not work on a UK magic on vodafone 32B at all! It reports Invalid CID, update failed!
2) use the fastboot boot cm-recovery-1.4.img via the SDK - This does not work on my phone! - I have the device listed when I use "adb devices" so the drivers are ok but it hangs at <Waiting for device> when i try to fastboot boot cm-recovery-1.4.img!!!!!! No ammount of killing the server and remounting as per the cyano instructions works!!!!! in fact, it wont let me remount (Operation not permitted)!!!
If you don't understand please don't post. People who have not updated to 1.6 OTA and people who don't have a UK voda 32B - stop posting here.
Grrrr
Click to expand...
Click to collapse
Get latest version of fastboot binary. I had problems with original one and htc magic. Drop fastboot.exe into the sdk tools folder.
Reboot your phone holding back and power simultaneously.
Then plug usb cable.
in Dos prompt go to sdk tools folder and type "fastboot devices"
if your device is listed you are good to go.
then "fastboot boot cm-recovery-1.4.img"

Frustrated noob question

Hi all
I feel like i am going round in circles trying to get my 32b magic rooted. Ive tried all sorts of methods even buying relentless rooter magic, but after lots of helpful emails i was told i have a perfected spl1.33.0007.
I was then told my problem would be solved by creating a gold card. I did this following the unlockr guide. Then went back to trying to use relentless rooter but I still cannot get the phone rooted.
I would appreciace any guidance at this point as I really dont know what else to do. Some of the help people give is great but it assumes a certain level of android knowledge that I have not got and will not ever have.
Thanks in advance fellas. I hope you can help as I love my phone
Regards
Del

have you tried follow these instructions?
http://forum.xda-developers.com/showthread.php?t=548218
to make sure your not on perfect spl.
for rooting check this thread
http://forum.xda-developers.com/showthread.php?t=547133
then you should be able to fix it

Sorry to be stupid but where do i get the following from?
* an non-perfected SPL (preferably an engineerings SPL).
* a ROM with a version that is HIGHER than your current ROM version.
Im sure this is all straighforward stuff to all you guys who do this all the time but it just seems like one obstacle after another for me
Thanks again for the help

i don't know much about the 32b version, but the second thread i posted to you is the one to use, try read very good the first post in it, cause the first thread i posted he tells 32b user to go to the second thread, so try study the second thread thats what i can do to help, hope you find something in it.

Again please excuse my stupidity but i have not a clue what ROM is appropriate for my phone. This is the problem that I always encounter, that others assume that your level of knowledge is comparable to theirs. I know im not a total moron but this is a whole new language to me and the last thing i wanna do is ruin my phone. It seems the more i read on forums etc the more i get confused as there are a seemingly infinite array of different methods to get your phone rooted.

well can you provide info on which spl radio you have now first?

He mentioned in the original post he had perfected spl1.33.0007.
How about telling us what you did with the goldcard process, what happened and what went wrong? Any errors received that you can tell us etc will help us to help you.

just wondering cause he messed with the phone after getting the info of perfected spl so just wanted to be clear what there is to work with so he can get a working good phone

I followed the gold card process on the unlockr webby and all went fine. No issues there at all.
Im now stuck as to what to do next. I bought relentless rooter software and the guy on support has been helpful. Just wondering what my next port of call should be. Like I said im no Mr Android but Im not totally clueless either. I would just like it if someone could tell me what should be the correct/best/simplest procedure for getting my phone rooted and getting the best/closest ROM to 2.0/2.1
Sorry to be a pain but there is so much info out there its really difficult to determine whats right and whats wrong.
BTW Ive got 2 magics so if a totally brick one, Ill know to definitely stop. Unfortunately they both have the same spl
Thanks again in advance
Just tried another method from the relentless support. Ive put SAPP.nbh on my goldcard and restarted with vol down and power. Tried to apply the image and got an error of
model id incorrect!
Update fail
Do you want to reboot device?
any more advice please?

first off im not trying to be a **** here... but..if your having this much trouble rooting, and you admit you dont know much, then why are you bothering rooting??
if you root and get a custom rom on your phone, you will NEED to know how to update said rom, as you will not get support from your carrier.
rooting is not hard, there are MANY guides out there that hold your hand and walk you threw rooting, installing rom ect ect...
for you i would recommend cyanogen mod (www.cyanogenmod.com) JUST because it is stable and works great.. i dont think you want a rom like super d , cdsi , fasttest or something like that where you will probably have to update your rom somewhat often.
please see this guide and READ it fully, its not hard to understand or to follow....just make sure you are on a 32B, if you are not then this guide will not work..
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
also you are looking for a rom that is 2.0/2.1, first off they are not fully functional, there are issues with all 2.0/2.1 roms out there (some are great dont get me wrong, but in my mind not fully functional) so again i would recommend cyanogenmod its based on 1.6 but has bits and pieces of eclair(2.0) in it. before you try a 2.0/2.1 rom i would say get root first, run cyanogenmod and go from there..
again.. im not trying to be a ****.. but it really isnt hard rooting.. and hearing you say you dont know anything is kind of rediculous.. i came into the android scene not knowing anything, its easy to learn if you want to, if you want the easy way out without learning then dont root...
edit: Im sorry i sound harsh, but i still stand behind what i said.. please please please try the cyanogenmod wiki guide, and also please post EXACTLY what sys ver your running, which carrier your on, and confirm please the SPL..

i started out knowing nothing too, but reading and do what guys say in their guides gets you far, and when keep wanting to tell in every post (i know nothing) is kinda saying, don't use custom roms cause if something goes wrong, you will be more fustrated and angry on the android system (also not trying to be rude, but think about it, do you really want to root?)

In the normal course of events I am capable of following the simple instructions found on forums like this to do whatever I need. In the past I have chipped my xbox and flashed my 360, but I am really struggling with my phone. The reason I went for the relentless piece of software was because it was supposed to be simple.
As far as I was concerned I was having a problem following the instructions until I was told I had a perfected SPL. Thats why I had so much difficulty in the past getting it rooted. I thought using relentless might help me out in that respect. It didnt.
So I then find out that I need to create a gold card. Got that sorted ok, then proceeded with the root process. All systems stopped again as I get model id incorrect error. I posted on here to see if anyone else was having the same problems and would be willing to help.
I am really thankful for the suggestions so far and if anyone has any more I will endevour to use them. But my main problem is that there is so much info out there its difficult to work out whats right and wrong especially if you are encountering problems like I am. Ive seen many videos and read many tutorials on how to root so I know it should be straightforward but that has not been my experience thus far

have you tried the wiki link i posted??
start over.. forget everything you have done.. and try that wiki link..
again we need to know your phone model, carrier, spl and sys version(android 1.5, 1.6, ect ect) to move forward if you still are stuck..

Thanks again for your help
My phone is a UK Vodafone Magic 32B
1.33.0007
CPLD-10
Radio- 2.22.19.261
Its running on cupcake and wouldnt update OTA when it was sent out last year
Just reading through that wiki now. Thanks again for all your help. I really appreciate it

also see this
http://forum.xda-developers.com/showthread.php?t=640229&page=2

delboypb said:
Thanks again for your help
My phone is a UK Vodafone Magic 32B
1.33.0007
CPLD-10
Radio- 2.22.19.261
Its running on cupcake and wouldnt update OTA when it was sent out last year
Just reading through that wiki now. Thanks again for all your help. I really appreciate it
Click to expand...
Click to collapse
You need to make certain that your gold card was made properly. My first attempt at making a goldcard failed for no reason what so ever. The second attempt went fine on the same micro sd card. I would follow the directions of using Flashrec. That process has been flawless due to the fact that it takes advantage of a bug in Android 1.5. It's easy as long as your goldcard was made properly. Good Luck
p.s. once your able to flash an engineering/non-perfected spl, Leave It Alone.

I had the same problem with mine, couldnt find a guide that works on a uk Voda Magic
I used this and it worked great:
http://wiki.cyanogenmod.com/index.p...o_CyanogenMod#Spanish_Vodafone_1.6_NOT_rooted
Use the guide for Non-TMobile 32B Magics

sapphire pvt 32b ship s-on g
hboot-1.33.0007 (sapp30000)
cpld-10
radio-2.22.23.02
jul 31 2009, 15:49:25
main version is older!
update fail!
do you want to reboot device?
action yes
power no
tmobile mytouch 1.6 just a regular mytouch not 1.2 ( fender)
i had rooted about 12 mytouch ( tmobile usa) and never had any problem till now,
i did the gold card using theunlockr how to.
and i still get the same error.
not know what to do to get this done.
i just can't downgrade to 1.5.
thanks.......................................

I finally pulled my head out of my ass last night/early this morning and got a handle on what i needed to do. And now I have a rooted magic with a shiny new hero rom on it. Very pleased with myself. Now off to try to get the second one done. Fingers crossed
Thanks everyone for all your help and patience. Its really appreciated

Back to square 1 again. After the excitement of havig a working root and displaying a rather lovely hero rom, I though all was well. So I decided to have a crack at rooting my other magic. During the process which was unsuccessful this time my original rooted decided to shut itself down for no apparent reason. Whe i tried to reboot it would get to the splash screen and no further even though it had been working perfectly happily just hours before.
Any help please?
The details are:
32b ENG S-OFF h
HBOOT-1.33.2005 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
I rooted using the gold card method and flashed with a hero rom. All the instructins taken from theunlockr.com as I couldnt get the cyanogen wiki instructions to work.
I did try the cyanogen wiki method having already rooted using gold card, but that phone also stops at the splash screen after flashing bot images. I waited several times for 15mins+ but nothing
I would really appreciate some help mainly on my first issue
Thanks in advance