3G/EDGE/GPRS not working with CyanogenMod and Baseband 62.47S.20.17U_2.22.19.07I - Android Software/Hacking General [Developers Only]

Hi,
I have a problem with my HTC Magic (Sapphire). I think my hardware is a pre-release version from Vodafone (Italy)...
With CyanogenMod (v4.2.14.1) the 3G/EDGE/GPRS is not working at all!
Info:
Sapphire PVT 32B SHIP S-ON G
HBOOT-1.33.0003 (SAPP10000)
CPLD-11
RADIO-2.22.19.07I
Mar 23 2009,20:43:30
So my Baseband info is: 62.47S.20.17U_2.22.19.07I
When I configure APN (these are correct) I can't go to Internet (3G icon don't appear in the upper toolbar). With previous original Vodafone firmware I was able to surf.
Please help me,
thanks,
thebis

bump
Any ideas?
Thanks,
thebis

I can confirm this. Using 32A, from Vodafone Romania. I used AmonRa's tutorial to remove the perfected SPL, then applied the latest stable CyanogenMod: 4.2.14.1. In Wireless Controls, also there are two options missing: Enable only 3G, and Always on mobile internet connection.
Anyone knows how to fix this?
Thank you,
Cosmin

Not a hardware problem
I think your problem is that you don't have correctly set up the APN (Access point) which is necessary to access to the Internet using the GSM connexion.
Are you able to make phone calls and to access the Internet over Wi-Fi?

I have now AmonRA's ROM and it's working, same settings. It's weird, I don't see anyone else complaining about this...

sebyx31 said:
I think your problem is that you don't have correctly set up the APN (Access point) which is necessary to access to the Internet using the GSM connexion.
Are you able to make phone calls and to access the Internet over Wi-Fi?
Click to expand...
Click to collapse
I confirm that is not an APN setting problem. I have the same setting as my friend's HTC Sapphire with a more recent baseband... and mine is not working
Thanks,
thebis

cosminb82 said:
I have now AmonRA's ROM and it's working, same settings. It's weird, I don't see anyone else complaining about this...
Click to expand...
Click to collapse
cosminb82, can you address me to this working firmware?
Thanks,
thebis

Here it is:
http://forum.xda-developers.com/showthread.php?t=548379
It's not CyanogenMod, however. It's AmonRA, it works fine so far. Please let me know if you have any problems installing it...
Update:
Since you are already able to flash a ROM, I guess that's all there is to it, skip the first (~10?) steps. Just make sure you have the right radio, and install the ROM.
Can someone, more knowledgeable than me, confirm that the radio and the ROM must match?
Here's my setup:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
WARNING: I see you have a different board than mine. I have 32A, you have 32B. Don't flash the wrong firmware, it will BRICK the phone.

I was using CurseSence for about a week after Rogers kicked out my data connection. I missed Cyanogen so I flashed back to 4.2.14.1 and had data for about 24-36hrs before getting kicked off again. Over the last 36hrs I have been on the phone with Rogers 4 or 5 times now and apparently they now have a mass ticket open for a bunch of Magic users regarding the online waver not working. I am sure it's on Rogers end as my data was working and I had not flashed anything before I lost 3G.

I've experienced this problem and it turned out to be a bad sim card. I went to the local t-mobile shop and got a replacement and that fixed the problem. See if you can try out a friends sim card to test.
Good Luck!

data not working on nexus s cm7
i have a nexus s 19020t i can make phone calls but i can't use cell data wifi works and yes i have data enabled help me i use uff in bogota colombia

Related

Help needed on Radio and Roaming

Hi guys,
Ive search this forum for answers but i just cant find what i am looking for. I have two problems that i hope someone knows the answer too.
1, What is the latest and best radio version and can you link it for me.
2, For some reason my phone thinks its roaming all the time even thought i am connected to my home provider in my home country. Is there a setting somewhere i am missing?
Thanks in Advance!
latest radio is Radio 4.1.13.54_03.10.90
get it here: ftp://xda:[email protected]/Uploads/Smartphone/Vox/Radios/Radio 4.1.13.54_03.10.90.exe
that has something to do with the SIM not with the phone i guess(have you tried the sim in any other phone). Contact your home provider for that.
prajith said:
latest radio is Radio 4.1.13.54_03.10.90
get it here: ftp://xda:[email protected]/Uploads/Smartphone/Vox/Radios/Radio 4.1.13.54_03.10.90.exe
that has something to do with the SIM not with the phone i guess(have you tried the sim in any other phone). Contact your home provider for that.
Click to expand...
Click to collapse
Will that only update the radio and leave the WM6.1 image alone?
The sim works fine in all other phones.
Thanks for your quick answer
yes that will just update the radio.
if the sim is not working in the phone now, i don't guess a radio update would help.
but it doesn't hurt to give it a try
so go on...
prajith said:
yes that will just update the radio.
if the sim is not working in the phone now, i don't guess a radio update would help.
but it doesn't hurt to give it a try
so go on...
Click to expand...
Click to collapse
The radio upgrade solved the roaming issue.
Thanks for the link and confirmation

[Q] No 3G on pyr'o'ice 1.1.3?

I just bought a MT4GS used on eBay and activated a SIM on T-Mobile. It was loaded with HBOOT 1.45.0013 S-On, so, after rooting, I followed the instructions to install pyr'o'ice 1.1.3 desensed by first flashing its boot.img via fastboot usb. However, after trying this process twice and getting a successful install (amazing ROM, btw) both times, I still don't have any 3G connection. I only see the little "E" which I assume is edge and is mad-slow. Any tips on this? Something I did wrong? Thanks.
that all depends on your location not rom
I am running the same ROM and my connection shows H (which I believe is 3G), but there is a T-Mobile (my carrier) cell site about 1 block away from me
I recall reading that some stock roms lie about the reported connection speeds. You might take that into consideration if you are only looking at what the UI reports as the connection speed before/after the ROM flash.

[Q] Sensation XE no signal on a Particular Carrier

Hi All! We've been working with this issue for 2 days at our help channel #helpmenow.
I currently have an s-off 1.27 hboot sensation XE running Insercoin v 2.0 ROM.
My issue is I don't have get signal for a particular carrier. (Other SIMs for other carriers works just fine). This carrier used to work before, I was just charging and then I noticed that it got no service.
These are the steps that I took so far:
1. Check antenna at the cover
2. Tried SIM on another phone (SIM Works)
3. Tried a DIFFERENT SIM from a DIFFRENT carrier, it works fine on MY phone.
4. called my provider but no issues on their side.
6. used RUU
7. tried RIL's
8. Flashed old 1.17 firmware to clean radio data.
9. Flashed a different ROMv with and without full wipe
10. Also tried downloading apps to enhance signal but to no avail.
we've been working this out with ganesh007, kgs1992, T-Junk, David_ and others on the channel but as of now I still got the same issue.
Hopefully you can help us figure this out so it could be of use to others who might have the same issue in the future.
PS: Right now I am using a different SIM from another carrier so as to get the phone function of the Phone. The carrier you see below my name is the one that is having issues right now.
Thanks in advance.
kraddark said:
Hi All! We've been working with this issue for 2 days at our help channel #helpmenow.
I currently have an s-off 1.27 hboot sensation XE running Insercoin v 2.0 ROM.
My issue is I don't have get signal for a particular carrier. (Other SIMs for other carriers works just fine). This carrier used to work before, I was just charging and then I noticed that it got no service.
These are the steps that I took so far:
1. Check antenna at the cover
2. Tried SIM on another phone (SIM Works)
3. Tried a DIFFERENT SIM from a DIFFRENT carrier, it works fine on MY phone.
4. called my provider but no issues on their side.
6. used RUU
7. tried RIL's
8. Flashed old 1.17 firmware to clean radio data.
9. Flashed a different ROMv with and without full wipe
10. Also tried downloading apps to enhance signal but to no avail.
we've been working this out with ganesh007, kgs1992, T-Junk, David_ and others on the channel but as of now I still got the same issue.
Hopefully you can help us figure this out so it could be of use to others who might have the same issue in the future.
PS: Right now I am using a different SIM from another carrier so as to get the phone function of the Phone. The carrier you see below my name is the one that is having issues right now.
Thanks in advance.
Click to expand...
Click to collapse
Kabayan, we are on the same boat. I have the same exact issue..Sensation xe(2nd hand), originally from Singapore(Singtel), went as far as going back to GB stock. At first, I thought it was just sim locked to Smart, but when I tried a Sun sim, it worked. At this point, I do not know what else to do. Tried cleaning s58,tried firmwares with different radio's, etc. After reverting back to GB and putting in a Globe sim it still says "Your sim does not allow a connection to this network" and no signal. If you got any updates, please let me know. Okay?

HTC One S T-mobile unlocked on AT&T

I have Cyanogenmod running 4.4.2 with baseband 1.13.50.05.31_10.30.50.08L. It worked great on T-Mobile. couple of weeks ago I signed up AT&T, and now the signal drops constantly, phone calls is almost not usable, and mobile data is always on Edge.
Does anyone having the same issue? is this an issue of baseband? I read somewhere that european version of the baseband would work better with AT&T, can anyone confirm or deny?
Thx!
henryleestl said:
I have Cyanogenmod running 4.4.2 with baseband 1.13.50.05.31_10.30.50.08L. It worked great on T-Mobile. couple of weeks ago I signed up AT&T, and now the signal drops constantly, phone calls is almost not usable, and mobile data is always on Edge.
Does anyone having the same issue? is this an issue of baseband? I read somewhere that european version of the baseband would work better with AT&T, can anyone confirm or deny?
Thx!
Click to expand...
Click to collapse
u can try this:
chnge mid to PJ4010000
cid to supercid and run ATT RUU
then install cyanogenmod and see if it works
circuit1 said:
u can try this:
chnge mid to PJ4010000
cid to supercid and run ATT RUU
then install cyanogenmod and see if it works
Click to expand...
Click to collapse
Where can I download this ATT RUU? I don't see it here: androidruu.com
Ok, after some struggling here's what i did:
get s-off: firewater-soff.com/instructions
flash EU version of radio: http://forum.xda-developers.com/showthread.php?t=2255906
looks like it's staying on H+ now. and i haven't encounter dropped calls yet. will report back if otherwise

LTE problems

Hi, after pass Soff and cm13 installed, i have problems with LTE, data is blocked and impossible to send SMS. Plane mode resolve the problem but is temporary .
I have reflash a ruu but the problem persists.
Somebody could help me?
Ruu Europe 1.56.401.70 cid htc __ 034
Thank's you and sorry for my english
I have problems with LTE on cm13 on AT&Ts network, what you have to do is switch to 3g, or H/H+
Ok for CM13 but the problem persists after the flash of a ruu. The problem may come from where? Kernel, radio, hardware ?
CEDRIC23 said:
Ok for CM13 but the problem persists after the flash of a ruu. The problem may come from where? Kernel, radio, hardware ?
Click to expand...
Click to collapse
Well that's strange, first I would call your carrier and make sure u have 4g LTE, and see if they could do anything to fix it. It could also be where you are, you might not have 4g LTE coverage where you are.
The problem must come from the network, i am on holiday in Italy and lte works very fine. Strange.
My HTC One a9 bought from ksa didn't support Indian language.
double letters can't show smoothly
I tried in Malayalam
How to fix it
What are you in phone info>set preferred network type by typing *#*#4636#*#* in the dialer ? Thank's

Categories

Resources