Database Info

Dream Phone Literally " Wishlist "

I was wondering what would be a DREAM Phone could be like which can be reality with todays tech or 2 yrs from now.
Keeping HTC HD2 Specs as standard, what the other features you would like to see in future Phone of HTC's.
To keep it easy i have some ideas (may be stolen )
Suggest yours (Be realistic - dont suggest a 10X optical zoom cam or a mini drilling machine.)
Video Out analog + digital
USB Host
FM Transmitter
Thermometer + Humudity ctrl would be a plus
Dual Sim in world phone mode
Battery larger than 1500 Mhz
Solar Charger
HD Videos Player
3D Graphics Engine with HW acceleration
Four Hardware buttons near edges for Playing Games

I don't mean to be rude, but your list doesn't get close to the sort of things that I would like to see in ideal a device. In no particular order:
Picture Camera; 3-5mp No more than 5 as too many pixels for a small sensor would render the pictures too noisy. Decent optics and a proper flash (not LED) with manual as well as auto. Digital only zoom would be fine, with the option to specify size/resolution. Able to record HD video with zoom (without assisted lighting).
Front Camera; for voice calls, but more importantly available as a webcam for voip and messaging applications. 640x480 and capable of 25fps. Able to record.
GPS; assisted GPS with voice turn by turn navigation software, downloadable maps of all available territories, capable of walking and cycling modes as well as driving.
Compass; to assist the above standalone as a walking tool and also integrated with the GPS for streetview.
FM radio; not requiring headset as aerial so it can be played through the device speaker(s) or a bluetooth headset. FM transmitter.
Video; able to play HD video and support for accelerated flash videos.
Connectors; HD Video out, stereo out via standard 3.5" jack. USB connector for charging and supporting USB host.
IR; transmitter receiver with programmable (both the IR codes and the button appearance and grouping) multi-device remote control application. Good range transmitter.
Screen; Large resolution (capable of widescreen HD) AMOLED capacitive touch screen with a small capacitive compatible stylus built in to the phone.
Phone; Voice and video phone with integrated Voip. Dual Sim where both can be active (with separate controls for ring, vibrate, and silent) or individually disabled and password protected.
Sound; stereo with decent bass and volume. Full media player including video, audio, and lossless formats.
Networking; GSM and 3G with top current specs and multi-band (ideally able to support voice and data in Europe, Japan, and the USA - although this is a point that can be compromised on given its impracticality). Wireless-n compatible wifi. Tethering (and ethernet) via bluetooth and USB port.
Memory; large program memory (1GB?), large ROM for OS and built-in apps, large storage (16Gb) microSD slot (HCSD high speed).
Processor; 1.5Gb Snapdragon.
Barrery; large capacity >12hrs talk time >240hrs standby >6hrs video playback
OS: Linux kernel with root access android.
Form factor; Like the Touch HD.
Now although close, this is unachievable at present (combining form factor and battery life for example). I strongly doubt anything like it will exist any time soon (despite the wishlist not being that outrageous on an individual item by item basis). It would be ideal, though.

My old SPV e100 had a thermometer!
Id like TV out. I plug the laptop into the tv, but then I cant browse the net! Nightmare!

I don't mean to be rude, but your list doesn't get close to the sort of things that I would like to see in ideal a device. In no particular order:
Click to expand...
Click to collapse
No Problem Mate : Even i was thinking the same after posting.
However i agree with your ideal device exept i just want it to be running Win Os as i use a pc a lot so hacking / modifing is lot easier.
now coming to the post...
USB host with video out (digital) can completely elminate netbook / notebooks as we can connect a full desktop keybaord adn monitor ...few ppl at my work place hav asked for such technology...

My wishlist for a dream device
2Ghz processor
1Gb RAM
HTC Universal unbeatable form factor
4" VGA pivoting screen
Slim and nice design
A hardware keyboard
5Mpx camera
Front VGA camera
quadband
3G capable in México
Included all the great business features in Rhodium, like conference call
Maybe 2012.........

I want a usb port so i can plug in flash drives and extra hard ware. i also want at least dual micro sd card slots.
and i want it to look similar to the universal but with a screen that nearly takes up the whole lid plus more hard ware buttons.

Based on nexus one hardware (OLED 480*800, good memory, processor), i.e. best features of HD2 and Omnia 2
More hardware buttons (possibly detachable)
3.5mm audio line-in
Compass (good idea trendend)
Dual microsd slots (giving 2*32Gb storage)
USB host (unlikely!)
Software:
Nice new Windows Mobile without the niggles
An audio application 1/10 as good as rockbox
A working version of skype
A proper Onenote mobile, syncing to the cloud
Gaming platform (not that I'd use it, but it would help WM to progress)

Some things I don't see the need for:
FM radio: obsolete with internet?
Video out: I guess this is for showing off to friends, but are you likely to have the right cable to hand?
Thermometer/humidity: does this integrate with anything else the phone does? Otherwise just get an analog one and glue it to your phone!

CSMR said:
Some things I don't see the need for:
FM radio: obsolete with internet?
Video out: I guess this is for showing off to friends, but are you likely to have the right cable to hand?
Thermometer/humidity: does this integrate with anything else the phone does? Otherwise just get an analog one and glue it to your phone!
Click to expand...
Click to collapse
FM Radio is ubiquitous and of high quality. Still the best option for local news and sport as well as traffic reports. I like FM radio and don't want to carry a separate device. Video out becomes more useful when the device can record video. Shoot video, edit it, show it on a big screen. I'd rather carry a cable than another dedicated device and a cable.
As for temperature/humidity. I'm not particularly interested in it built into the device, because calibration could be a nightmare (given the device itself generates heat). I could be interested in remote devices (that connect via the USB host, perhaps?) with the likes of themocouples, pressure sensors, heart rate monitors, pulse oximeters. That could be useful with the right software....
I'm talking about my dream device. I do not require you to subscribe to my dreams. In return I'll stay out of yours.

Not perfect, but I'd probably settle for Something like this. Except with android.

External mic stereo

Hi! I'm a musician and would like to know if there is a good way to connect a stereo microphone to the Samsung Galaxy SIV (3,5 input jack, USB or Bluetooth).
Thanks.

What do you means?
Wanna a good earphone?
jomiber said:
Hi! I'm a musician and would like to know if there is a good way to connect a stereo microphone to the Samsung Galaxy SIV (3,5 input jack, USB or Bluetooth).
Thanks.
Click to expand...
Click to collapse

I wanna take high quality recordings.

Thanks, but I don't want to listen music. I need to record sounds in high quality with my smartphone.

Actually, with the app RecForge Pro, you can use the top and bottom mics on the GS4 to make stereo recordings. The quality is actually very good. The only limitation is that that mics will overload somewhere around 100 dbs, so you can't record a super loud concert. I have a nice Tascam recorder, but I actually just use the RecForge Pro and my GS4 to record our quiet jams/practices. Just make sure, in RecForge Pro, in the Settings to set File Format to Stereo Native. You can set recording level and can recording in 16 bit wav, MP3, or Ogg. RecForge 2 is out from the same guy, but it's in beta and does not yet allow stereo recording.

harpdoc said:
Actually, with the app RecForge Pro, you can use the top and bottom mics on the GS4 to make stereo recordings. The quality is actually very good. The only limitation is that that mics will overload somewhere around 100 dbs, so you can't record a super loud concert. I have a nice Tascam recorder, but I actually just use the RecForge Pro and my GS4 to record our quiet jams/practices. Just make sure, in RecForge Pro, in the Settings to set File Format to Stereo Native. You can set recording level and can recording in 16 bit wav, MP3, or Ogg. RecForge 2 is out from the same guy, but it's in beta and does not yet allow stereo recording.
Click to expand...
Click to collapse
I do actually record a lot with the phones mikes, too (before that with my S2 either).
But it would be a hell of a project, to transform our device to a stereo-recording with better HQ Mikrophones attached.
There is access to the mics. With enough soldering and additional wires and some non permanent connectors, it could be practicable.
BUT i am no expert in circuits - so i will let that part handle someone else! There certainly would be a need for something like that.
Putting a small hightech mike anywhere with a small Smartphone is not that obvious than having a real Recorder with you to have a good bootleg!

jomiber said:
Thanks, but I don't want to listen music. I need to record sounds in high quality with my smartphone.
Click to expand...
Click to collapse
I'm a studio musician myself and have looked into this a bit. You might want to have a leer at USB Audio Recorder Pro (in the play store); getting a high-quality ADC (with built-in mic pre) that is documented as working with that software; and an OTG cable.
Email the gentleman who created USB ARP and he'll give you a few choices that are proven.
Beyond that, get a high-quality USB analog-to-digital converter that works with the software I mentioned and use the mic that you would for a normal recording. I favor the AKG C414 for guitar, but that's just my preference. For field recordings, there are numerous setups to research on sites dedicated to that area.
One issue with Android is that it isn't a real-time OS, and there aren't as many music creation software options that work as there are for iOS. That's also because Apple has a legacy business with pro recording. The only reason I ever bought a mac is because I had to in order to work. All of the recording studios in New York required me to be proficient on it, since I'm a keyboardist and often end up running the show.
However, when it comes to smartphones, I tend to buy Android. I much prefer offerings by Samsung, HTC and Google to the iPhone.
Tablets are another matter. I love my Nexus 7 2014 for everything else, but for music creation and recording, the iPad Air destroys it. That's what I'd tend to use: an iPA with any of the proven ADCs that work with that tablet (and the camera kit) as well as PCs and Macs (no point in having to buy different I/O for my laptop).
The Surface Pro tablets have the potential to do the same in theory (legacy software, true Windows 8.1, etc.), but I haven't had any experience with them. You can read about people who have had on Gearslutz, which might be a better place to ask about recording on the S4.

Thanks for your answers!!!!! They have been very usefull!!!

http://www.ebay.it/itm/Cavo-sdoppia...289?pt=Computer_portatili&hash=item1c3b265d51 this will allow you to connect any microhpone to the audio jack.

[Q] WhatsApp Audio Quality Record Solution

Hello,
With some devices, whatsapp audio record looks very awful, almost unlistenable. I know that the app provide some compression over the file to save bandwith, but the strange thing is that with other devices(Sony, Apple, etc...) the sound quality is just great. With this, i have 2 theories about it:
1- There must be a file with audio profiles that the app could use, just like media_profiles.xml that tells output, bitrate, etc, or...
2- Whatsapp is using a "generic" audio record method, not getting advantage of other audio options the device could offer.
The only problem with the second theory is that if you record a video throught the own app/3rd party, the audio is very clear and good.I've tried to look over system/, data/, etc/ and libs/ to see if there's any file that could lead to solution but nothing came.
Please, someone consider some further investigation about this issue, with i believe many people faces this.
Thank you.

Stock Q no longer provides Audio Enhancer&Equalizer

Hi,
I send Feedback about it to Xiaomi and they said this:
"Dear user,
I am the Xiaomi user feedback group. The feedback about the Equalizer. Due to the adjustment of Xiaomi business, the Q version no longer provides this function, which is inconvenient for you."
So dont expect it on the future versions.

Solution for missing sound setup.
perfect_ said:
Hi,
So don't expect it on the future versions.
Click to expand...
Click to collapse
Not that the stock equalizer that came from Android Pie was any good. We just need people to try and revive the old DogsBark team (Noozxoide Laboratories) and make rootless DSP. I have nothing against Viper, don't get me wrong, on my other device I use Viper Audio, root and all that stuff... but sometimes you just need to stick to the old user/non-dev ways. I am sure it's possible, the problem is the financing and the will to do it. For me, the app developed by them and last updated in 2013 worked like a charm on many devices... except this one, since november update... That's when the problems started to appear.
Since then, I've been looking not just for an equalizer, but a self contained DSP pack that would work better and guess what, nothing's there... nothing except apps with built in function (which by definition are not system wide) and crappy adware.
As for the "Xiaomi business" this really shows me that Xiaomi really gave up on the development of this device, and ALL stock Xiaomi apps will be gone, replaced by Qualcomm's apps... and I don't ever recall seeing any DSP coming directly from Qualcomm.
----------Later addon----------
While the PRO version of Noozxoide EIZO-Rewire PRO has the problems mentioned it seems that the second software Noozxoide EIZO-Rewire Elemental which works even better is still compatible and working just fine on Android 10. Right now it's in testing and benchmarking... which is not an easy job to do, but as long as I love quality music I will do it and post results/download links for it.
-----Download Software-----
Download the Noozxoide EIZO-Rewire Elemental from HERE.
-----Testing abstract-----
For the following tests, were done using only hi-res audio (FLAC/ALAC 96khz 3mbps) files and 320kbps mp3 files so results may vary compared to what I tested here. Remember that streaming services use low bitrate/extremely compressed content.
---Test Speakers---
Internal audio speakers has a good response, bass is there audible, resolution is good, in this case I cannot post any reference to advanced graphs since they are irrelevant in this case.
The best settings (for me) are posted in the first screenshot here. While this is my recommendation, the software doesn't go overboard and keeps the audio quality in control. While testing all the test tracks which varies from Rock/Metal to Acoustic to a more aggressive dubstep there were absolutely NO cracks and pops in audio output from the speaker (which is a result of poor equalization/frequencies outside the speaker range).
---Test Line-Out/Amplified output---
Headphones (because of my current limitations of testing - a conclusive test would be source file vs. processed audio output and multiple headphone test - in ear, open back, ported, etc) were only tested with 3.5mm jack Apple EarPods which are well known to have the best consumer grade frequency response I found that the 2nd attached screenshot works best (for me). While some FLAC files with really deep bass (about 6-10Hz) totally overrun them (and not the Qualcomm audio processor) I would say that this DSP (VSP) works just fine on our devices.
I don't know if I should leave a placeholder here for the advanced, audiophile grade, passive amplified headphones.
---Test Wireless Audio---
Bluetooth and wireless media. Works just as expected. Test were done only with a Nokia BH-503 headset (couldn't test on the car, and neither did I want to spend time going to the car and test it on the BMW Pro-Logic system) but on those headset it made them literally vibrate on the ears, extremely good quality sound, deep bass, crystal clear trebbles and warm mid-tones. Again, I didn't manage to get a single crackle or pop on the speaker drivers which means the equalization done by this engine is sensible and perfectly limited/compressed. The settings I used are posted in the third screenshot.
-----Conclusion-----
The solution posted here works fine, while extensive testing the app still shows that is consumed 0% battery, so the battery drain is minimal.
The application works perfectly after reboot and closing from the recents screen, there were no modifications done/or excluded from the battery optimization screen.
This application is not a booster, this application is a DIGITAL SOUND PROCESSOR controlling the Qualcomm core (was built for this back in the day) and upscaling the audio resolution.
-----Q/A-----
Q: Does this app require any tampering with the system?
A: No, this app is installed as a normal app from the link provided (Play store link)
Q: Does this app work as a system wide equalizer and integrates in other apps?
A: Yes, yes it does, and from my testing it works with all media players (the equalizer option opens up the app), Youtube, Games, etc.
Q: Does this app consume system resources while processing?
A: Yes and no. Of course you need system resources for processing but they aren't that intensive at least for MP3 processing but for FLAC/ALAC processing things get a little more frisky as shown in the 4th screenshot attached.
Q: How's the battery drain overall with FLAC and MP3 playback?
A: Depending on the method of listening the drainage is different, but even on Bluetooth the consumption didn't affect my battery overall.
Q: Does this enable AptX?
A: No. This has nothing to do with that. But while AptX and SBC are not that different in base audio quality, this pushes the codec to 328kbps and upscales the audio to a resolution of 48khz which is ideed great for maxed out mp3 quality over Bluetooth, which again is based on the source files.
----------Thanks----------
If this problem helped you fixed a problem, press the thank you button.

Can You Screen Mirror/Cast With Dolby Digital Output (5.1)?

It has been a bit frustrating trying to find an answer to something that I would think would be a common question (or not common since people with real surround systems are rare). Anyway, is it possible to output 5.1 surround sound (Dolby Digital Plus, DTS, etc) to an external device like a TV? If you can't mirror cast/screen cast that, is their a way to get that kind of audio output from some kind of usb-c to hdmi cord/adapter?
If the answer is no to both, and that it's impossible to do at all, why would such a seemingly basic thing never come to be supported?

The only possible way to retain full resolution is using the C port and keep the signal in the digital realm (minimum output should be 24/96 khz) to a quality reciever.
Normally Dolby, DTS, HDCD, etc is then decoded by the reciever and brought into the analog realm.
BT LDAC is the best bluetooth option available for this device, but this will degrade the image.
It lacks the bandwidth to fully support 24 bit/48 khz and higher resolutions.
A degraded image will be especially noticeable with a stereo image or more channels on a room sound system. They lower the resolution, the more of sound stage you lose. Mp3 have about none, CDs better, HDCDs much better, 24 bit and higher, best.

blackhawk said:
The only possible way to retain full resolution is using the C port and keep the signal in the digital realm (minimum output should be 24/96 khz) to a quality reciever.
Normally Dolby, DTS, HDCD, etc is then decoded by the reciever and brought into the analog realm.
BT LDAC is the best bluetooth option available for this device, but this will degrade the image.
It lacks the bandwidth to fully support 24 bit/48 khz and higher resolutions.
A degraded image will be especially noticeable with a stereo image or more channels on a room sound system. They lower the resolution, the more of sound stage you lose. Mp3 have about none, CDs better, HDCDs much better, 24 bit and higher, best.
Click to expand...
Click to collapse
Alright, so, I bought one of these https://www.amazon.com/dp/B07G2GJFF3/ref=cm_sw_r_cp_apa_fabc_KNVWFbWRMZRWP?_encoding=UTF8&psc=1 hooked it up to my TCL 75Q825 TV, and I was able to get a 4K 30fps connection. My TV has an HDMI ARC channel I use to bitstream audio to my Integra DHC-80.3 reciever so that I get Dolby Digital Plus and DTS output from my Smart TV app's shows and movies, but the Note 20 Ultra will only play 2.1 channels.
So if I directly connected the hdmi adapter to the reciever, and fed the video and audio through there to the TV, would I get the 5.1 channel sound? Or am I misunderstanding what you said and basically you can't really do it?
I'm actually going to be returning the hdmi adapter because I found out that there are better adapters that will allow me to have 4K 60fps from my ultra, but honestly, if I can't get HDR out of it and surround sound, I probably will forget the whole thing.

I'm not for sure what the 20 is outputting in the digital realm. It would need to preserve the digital DTS encryption for it to work. Same for Dolby 5.1
I doubt it will glean these though.
However as long as it outputs 24bit/48khz in the digital realm it will preserve the HDCD encoding subtext (my only interest at this point).
Sorry I never had use for this. The C port digital is how the get the highest possible resolution throughput from it.
The hardware/firmware/software must support formats like Dolby 5.1 or DTS.
Does Sammy even support Dolby 5.1 let alone DTS on this?
Sammy been pretty backward in this respect so I doubt it.
Best I can tell it doesn't.
https://www.samsung.com/us/support/answer/ANS00080318/

blackhawk said:
The only possible way to retain full resolution is using the C port and keep the signal in the digital realm (minimum output should be 24/96 khz) to a quality reciever.
Normally Dolby, DTS, HDCD, etc is then decoded by the reciever and brought into the analog realm.
BT LDAC is the best bluetooth option available for this device, but this will degrade the image.
It lacks the bandwidth to fully support 24 bit/48 khz and higher resolutions.
A degraded image will be especially noticeable with a stereo image or more channels on a room sound system. They lower the resolution, the more of sound stage you lose. Mp3 have about none, CDs better, HDCDs much better, 24 bit and higher, best.
Click to expand...
Click to collapse
blackhawk said:
I'm not for sure what the 20 is outputting in the digital realm. It would need to preserve the digital DTS encryption for it to work. Same for Dolby 5.1
I doubt it will glean these though.
However as long as it outputs 24bit/48khz in the digital realm it will preserve the HDCD encoding subtext (my only interest at this point).
Sorry I never had use for this. The C port digital is how the get the highest possible resolution throughput from it.
The hardware/firmware/software must support formats like Dolby 5.1 or DTS.
Does Sammy even support Dolby 5.1 let alone DTS on this?
Sammy been pretty backward in this respect so I doubt it.
Best I can tell it doesn't.
https://www.samsung.com/us/support/answer/ANS00080318/
Click to expand...
Click to collapse
Alright so this is what confused me about the audio capabilities https://www.samsung.com/us/smartphones/galaxy-note20-5g/specs/ just use find in page and put "Dolby" and you should find the sentence that throws me off. Makes it sound like it can at least decode those formats? From my perspective the whole thing just seems odd, I mean to give a piece of hardware those kind of capabilities, and then not be able to output that to something that could really make use of it, makes those capabilities a bit pointless. But to be fair, I do have a usb-c to aux adapter that allows 32 bit audio to pass from the phone to some high end equipment and I rather like it, just wish there was a way to bitstream that audio so as to have a solid surround sound playback.

dece870717 said:
Alright so this is what confused me about the audio capabilities https://www.samsung.com/us/smartphones/galaxy-note20-5g/specs/ just use find in page and put "Dolby" and you should find the sentence that throws me off. Makes it sound like it can at least decode those formats? From my perspective the whole thing just seems odd, I mean to give a piece of hardware those kind of capabilities, and then not be able to output that to something that could really make use of it, makes those capabilities a bit pointless. But to be fair, I do have a usb-c to aux adapter that allows 32 bit audio to pass from the phone to some high end equipment and I rather like it, just wish there was a way to bitstream that audio so as to have a solid surround sound playback.
Click to expand...
Click to collapse
If you go into the reciever in the digital realm and get a Dolby or DTS indicator light up you got your answer.
Don't think you'll see this but it be cool if you did
By the way for HDCDs you don't need a decoder; a reciever with high resolution DAC(s) will glean 90+% of the subtext and yield around a 22 bit image.
You must stay in the digital realm going in though to preserve that encoding.
Many CDs are HDCDs but not marked as such.
Example: B52's Time Capsule album is an HDCD.

blackhawk said:
If you go into the reciever in the digital realm and get a Dolby or DTS indicator light up you got your answer.
Don't think you'll see this but it be cool if you did
By the way for HDCDs you don't need a decoder; a reciever with high resolution DAC(s) will glean 90+% of the subtext and yield around a 22 bit image.
You must stay in the digital realm going in though to preserve that encoding.
Many CDs are HDCDs but not marked as such.
Example: B52's Time Capsule album is an HDCD.
Click to expand...
Click to collapse
Ok so I tried plugging in the hdmi from the adapter directly into the receiver, when I look at the audio information display from the receiver on that input, it shows as 2ch PCM audio as what's being received, tried different apps on my phone that I thought maybe support Dolby Digital Plus (Vudu, Anywhere Movies, and tried MX Player Pro with a couple movie trailers that contain and able to select Dolby Digital audio) but to no avail. And as I thought about it, I forgot something basic that I should have immediately remembered, I won't be able to get actual Dolby Digital Plus or DTS audio coming through to the receiver unless the phone and/or app allowed/had an option of bitstreaming audio. I was hoping though, that at the very least, the phone could send out 5.1 PCM audio. So either the phone just hasn't been given that ability or I need a certain adapter that would allow it.
It would be really awesome if they made the screen mirroring and/or USB-C outputs of a phone more customizable, like being able to adjust video resolution output, color format, bit depth, and of course audio options with bitstreaming and/or speaker channel options.

Make sure the phone's UHQ Upscaler is enabled/active after hook it up.

blackhawk said:
Make sure the phone's UHQ Upscaler is enabled/active after hook it up.
Click to expand...
Click to collapse
I'll try that when I get home, assuming that option becomes selectable, from what I read that option is for use with headphones, I guess I'll find out if that USB-C connection with the adapter allows it to be enabled. I assume it might, I'm sure my USB-C to aux cord would allow its enablement as that connection would be for headphones as well.
I guess this frustration is what I get for being part of that very tiny minority of audio/video "weirdos", lol. What I see as basic options that should be available considering the hardware capabilities of a device, most phone engineers will never think about.

At one point I had a Denon flagship 7.1 reciever driving all identical THX bookshelf speakers with two 400 watt subwoofers on the mains in a stereo configuration.
Excuse me while I kiss the sky
So... now I have this silly Note 10+
And yes Sammy's engineers have dropped the ball with sound so many times their faces are imprinted on the tarmac. Feel the wuv.

blackhawk said:
Make sure the phone's UHQ Upscaler is enabled/active after hook it up.
Click to expand...
Click to collapse
Was able to and enabled the UHQ Upscaler, checked my receivers audio display info, and what it did was change the sampling rate from 44kHz (or I think it was 48kHz) to 192kHz. It's possible that it also raised the audio bit depth, but my receiver didn't display that info.
Yeah best thing that could be done would be Samsung adding a bitstreaming capability, if it had that, a speaker channel option would be less of an issue, since bitstreaming would carry the speaker channel information built into the audio codec that is bitstreamed.
I would think something like that could be implemented through software alone, as whatever source is sending the audio doesn't need to decode it or anything, it just has to be sent untouched.

dece870717 said:
Alright so this is what confused me about the audio capabilities https://www.samsung.com/us/smartphones/galaxy-note20-5g/specs/ just use find in page and put "Dolby" and you should find the sentence that throws me off. Makes it sound like it can at least decode those formats? From my perspective the whole thing just seems odd, I mean to give a piece of hardware those kind of capabilities, and then not be able to output that to something that could really make use of it, makes those capabilities a bit pointless. But to be fair, I do have a usb-c to aux adapter that allows 32 bit audio to pass from the phone to some high end equipment and I rather like it, just wish there was a way to bitstream that audio so as to have a solid surround sound playback.
Click to expand...
Click to collapse
dece870717 said:
Was able to and enabled the UHQ Upscaler, checked my receivers audio display info, and what it did was change the sampling rate from 44kHz (or I think it was 48kHz) to 192kHz. It's possible that it also raised the audio bit depth, but my receiver didn't display that info.
Yeah best thing that could be done would be Samsung adding a bitstreaming capability, if it had that, a speaker channel option would be less of an issue, since bitstreaming would carry the speaker channel information built into the audio codec that is bitstreamed.
I would think something like that could be implemented through software alone, as whatever source is sending the audio doesn't need to decode it or anything, it just has to be sent untouched.
Click to expand...
Click to collapse
Excellent. It may support up to 32 bit certainly 24 bit.
Never looked into that as my music database is .wav and HDCD files. As long as I have 24 bit throughput they're good to go.
I know I wasn't able to rip DTS audio files to hard drive but since I only had one album at the time I dropped the issue.
The only reason I know as much as I do about HDCDs is Tony Harding at Denon* was kind and generous enough in 2004 to fully explain the technology and how to save/decode them. I have over 200 gb of .wav files on my 10+, my whole CD collection in my hand.
That's pretty cool.
Some of the high end audio sites would be good places to find answers. There are definitely people there that know.
*Denon gives near unconditional product support including hardware and firmware. They are on the bleeding edge of high end home audio.
Dollar for dollar they give you the most bang for the buck.
Their flagship receivers rival those costing thousands more including standalone audiophile products.
There devices always exceed their written specs and they support them for life.
Denon has even have issued hardware/firmware upgrades for their flagship recievers which is unheard of at this price point. They've been a industry innovator for over a century.
Rub up against them and you'll be pleasantly surprised.