Database Info

Sorry i'm French Big Problem superCID message in french Help

Bonjour a tous et désolé d'ecrire en francais mais je ne pense pas me faire comprendre en Anglais!
J'ai acheté un Kaiser aujourd'hui en version Orange et j'ai voulu mettre la Rom officielle HTC.
Je n'ai pas bien suivi le tutoriel pour mettre en super Cid et j'ai coupé avant la fin de la premiere étape donc je n'ai pas fait le dernier transfert!
Je suis donc bloqué sur le bootloader (serial) et je ne peut rien faire! Aucune Rom ne passe!
Je ne peut pas reprendre la procédure du super Cid? je n'arrive pas non plus avec la carte mémoire (hermimg)
A l'aide!
Help Help Help
Thanks
Hello everyone and was sorry to write in French but I do not think I make myself understood in English!
I bought a Kaiser today in Orange version and I wanted to put the Roma official HTC.
I did not quite follow the tutorial to put into super Cid and I shut down before the end of the first stage, therefore, I did not make the last transfer!
So I am stuck on the bootloader (serial), and I can do nothing! None Rom does!
I can not take up the proceedings of the super Cid? I can not with the memory card (hermimg)

Je ne comprends pas bien ton souci, tu as branché ton pda a ton pc, tu l'as syncro, tu as lancé la procédure et il a reboot. Mais si tu n'as pas lancé l'utilitaire d'update il devrait encore être sur le bootloader d'origine.
Pourrais-tu être plus précis ?
Et faire des manipulations comme ça sans lire les instructions c'est très mal !
I do not fully understand your concern, you plugged your pda a ton pc, you have syncro, you have started the procedure and he reboot. But if you do not launched update utility should still be on the original bootloader.
Could you be more specific?
And can manipulate like this without reading the instructions is very bad!

Don't you say nothin' bad about my momma!!!!!!!!!!!!
Ne pas vous dire quoi que ce soit de mal de ma maman !!!!!!!!!!!!

Alors a bien compris ledébut j'ai fait la parti *superCid mais pas complete je n'ai pas fait la parti d'update dutout petit fichier et voila mon erreur. Et j'ai ensuite mi la rom HTC FR et elle a été jusqu'a 16% pui blocage et erreur!
Impossible de remettre ni la Rom offricielle, ni celle d'orange, ni de finir le super CID
Voila
MErci
a l'aide
So has understood the beginning I made the device * superCid not complete but I did not make the device update dutout small file and voila my mistake. And then I did rom FR HTC, and was up 16% - blocking and error!
Unable to recover Official Rom nor orange, or finish the super CID
Voila
Thank you
for your help

Ok so, i don't think i'm enough skilled in flashing htc's for helping him, so here is the point :
He tried to HardSPL his device but he interrupted the installation before the RUU and never did the update. He then tried to flash an official HTC rom, the flash stuck at 16% he interrupted it again and now his device seems to be stuck on the bootloader.
Any ideas ?
PS : i already told him it was really really bad to not read the HowTo
P1Tater > I promise, i didn't, well, i think... xD

anaethelion said:
Ok so, i don't think i'm enough skilled in flashing htc's for helping him, so here is the point :
He tried to HardSPL his device but he interrupted the installation before the RUU and never did the update. He then tried to flash an official HTC rom, the flash stuck at 16% he interrupted it again and now his device seems to be stuck on the bootloader.
Any ideas ?
PS : i already told him it was really really bad to not read the HowTo
P1Tater > I promise, i didn't, well, i think... xD
Click to expand...
Click to collapse
what happens if he hard resets

anaethelion said:
Ok so, i don't think i'm enough skilled in flashing htc's for helping him, so here is the point :
He tried to HardSPL his device but he interrupted the installation before the RUU and never did the update. He then tried to flash an official HTC rom, the flash stuck at 16% he interrupted it again and now his device seems to be stuck on the bootloader.
Any ideas ?
PS : i already told him it was really really bad to not read the HowTo
P1Tater > I promise, i didn't, well, i think... xD
Click to expand...
Click to collapse
This has happened to me several times in the past. Tell him 1st not to worry or panic. I would imagine there may be several situations that can cause this, so this may not be the only answer. In my case, I noticed that before this happened, activesync would connect and disconnect seemingly for no reason. So, I surmized that they could be related and persisted by flashing when it seemed this situation settled down. I'm still not 100% sure why this happens to USB/activesync, but I should follow up on it... someday.

Comme conseillé par P1Tater, as tu essayé un Hard reset
Pour se faire sur laisse appuyé sur les deux soft key (calendrier et contact) tout en effectuant un soft reset.
As advised by P1Tater, have you tried a Hard reset
To do this press both soft keys (calendar and contacts) while performing a soft reset.

Merci mais le Hard Reset ne donne rien!
Je ne peut mettre aucune ROM
Quand il démarre il est sur le bootloader et rien d'autre!
Merci d'avance pour vos réponse
Nicolas
In english
le hard reset do nothing!
I can't put any ROM!
When it start i see bootloader only!
Thanks
Nicolas
Did Hard Reset but does nothing!
I cannot put on any ROM
When it starts it is on the bootloader and nothing else!
Thank you in advance for your response
Nicolas

I am not totally sure to be honest, the likes of GSLeon3 or jocky would be more apt at helping in this situation. I guess you could try HERE, but like I said, I am not really sure. I have never interrupted a flash for fear of thinkgs like this. I guess you could also go to the rom section and download an untouched rom in .exe format and give that a shot as well, which is HERE. You could also try the section for Hardspl will not install White screen solved which is HERE. Like I said already though, I am not totally sure but I guess they are worth a shot.

I'm back, the main problem of this guy is the French Orange TyTN II has it's own rom and orange, as far as i know, never released the original rom on the internet.
So for him it's like if a tilt owner tried to flash an HTC stock rom without having installed the HardSPL at all, i think the solution is around MTTY but since i never used this tool i'm not really sure about that fact... ^^

Thanks for your answer! on this topic,http://forum.xda-developers.com/showthread.php?p=1765045&highlight=unbrick+phone#post1765045is exactly my problem, when y tried to put HTC's rom, my phone blocked at 16%!!
I download MTTY but i never see "USB port" only "port com..."
Help me please
I used Windows Vista
Nicolas

Vérifies que ton kaiser est bien branché en USB (ouais je sais, mais bon) éssayes de débrancher et rebrancher, vérifies aussi que ton firewall laisses passer la connection du téléphone.
En fait vérifies que tout laisses passer la connection, au besoin désactive le firewall le temps de manipuler le téléphone.
Ensure your Kaiser is connected (USB connection tone). Unplug and replug if necessary, also verified that your firewall lets the phone pass through.
If necessary disable the firewall.

Merci pour toutes vos réponses! j'ai réussi a refaire fonctionner mon tytn!
J'ai réussi a faire fonctionner mtty sur mon deuxieme PC en windows XP!
Et j'ai reussi a recommencer toute la manipulation et a mettre la Rom HTC!
Par contre je n'ai aucune idée si j'ai la derniere ROM?
Comment peut on le savoir? ou se trouve les ROM sur le site HTC car je suis bien inscrit? Et les mise a jour officielle?
Merci
Nicolas

Writing in French is OK.
But, our rules say you must give an English translation.
Use Google languages if necessary.
(The quality of the translation is not important!)
Mike
Écrire en français, c'est bon.
Mais, disent nos règles, vous devez remettre une traduction en anglais.
Utilisez Google langues si nécessaire.
(La qualité de la traduction n'est pas important!)
Mike

NEW ROM PHAROS french

hello
for download my rom guigou
link
http://rapidshare.com/files/123151232/Rom_fr_HTC_Pharos_par_guigou_xda.zip.html
this rom is beta test
thank you for info simunlock yes or no

Flash ok.
No Sim unlock for me.

Hello
Thank you guy! I'm gonna try it on my P3470.
Only one question, is that really for the P3470???

Yes. Pharos P3470

Thanks for your fast answer
I need to know how does it really works, i'm new on HTC flashing and i'm french too
Can you explain quickly what to do?
I know that i got to hardspl then flash the ROM but is there any risks?
Thanks in advance bro

First read this ==> http://forum.xda-developers.com/showthread.php?t=398726 (patch your SPL).
After you can flash any rom on your Pharos.

Thank you

Pharos
Pour info impossible de télécharger la ROM

Impossible de télécharger du serveur vers ton pc ou de la flasher sur ton Pharos?

Pharos
Du serveur vers mon PC

ouhlala
Attention, le GPS ne fonctionne plus, manque officeppc.

Aucun retour pour le désimlockage?

Pharos
Quelqu un aurai t il une solution our le GPS?

je pense qu'il y a peut etre une legere difference entre le pharos orange et le pharos nu, et plus que pour la rom, je pense qu'il y a dans la rom radio de la version orange un accès different au circuit du gps. a voir, pour le moment faut que j'arrive a remettre la rom integrale du pharos orange dans le mien j'ai trop besoin du gps.
Quelqu'un pourrai t'il faire un packtage avec l'utilitaire et la rom orange d'origine ? j'ai les fichiers raw, mais je n'arrive pas a faire un ruu_signed.nbh pour re flashé mon pharos.

fichier raw en nb
pour creer un fichier nb avec part02.raw utiliser la commande
ImgfsToNb.exe Part02.raw Windows.nb NewPart02.nb
windows.nb est le fichier nb original anglais ou francais
puis utiliser htcrt dans country id mettre HTC00001
A VOS TEST DE ROM

Hey,
I try to flash my Pharos but no way! I would like to sim unlock my phone which run on Orange, and to have a nude rom.
Yours looked like a good solution but process does not work on mine. I have already done it with my trinity (faman) however.
I'm little bit desperate cause I tried again and again. Can you tell me how to do? Maybe I did it in a wrong way.
Actually, as soon as the grey screen appears it stops at 2%...
Thanks for help

slt nessmasta pour installer une rom sur le pharos il te faut le hardspl de tom codom

probleme
salut l'ami je n'arrive pas a flasher mon ppc ca fonction mais la barre de % s'arrete a 2/3% et puis le programe s'arrete tous seul peu-tu stp me faire un ptit tuto en francais stp merci baucoups vraiment l'ami suis en galere avec se phone
c'est un pack orange avec les ref. : rom 1.13.73.1 FRE
V.radio 03.18.90
protocol 4.1.13.60
v. operator 29.113.2.731
Merci de ton aide

salut GUIGOU c'est quoi le le hardspl de tom codom ?
je suis un peu novice deçu merci

noux113 said:
Attention, le GPS ne fonctionne plus, manque officeppc.
Click to expand...
Click to collapse
Effectivement! Que faire Please???

HELP!! I think I killed my qtek/Je pense que j'ai tué mon qtek! Au secours!!!

Hello,
i wanted to upgrade my qtek win mobile 5 to win mobile 6.
I updated ROM and then I started update for mobile6 with WM6.1_netDrg_V3.5F_UP1.exe.
Update started and then my telephone shut down by itself and then nothing. Absolutely nothing. no light. I cant start it and no hard reset. when I plug it with charger no light of charging either. I think I deleted the ROM by mistake.
Does anybody have an idea ? What can I do?
Thanks a lot
Bonjour,
J'ai voulu installé mobile 6 sur mon qtek9100.J'ai mis à jour le ROM.
Après j'ai commencé le mis a jour avec win mobile 6 (avec WM6.1_netDrg_V3.5F_UP1.exe).
Le procès a commencé. quand mon tel était branché a mon ordi portable.
pendant installation il s'est éteint et après plus rien.
j'ai aucun lumière rien. je peux plus allumer. quand je branche avec le chargeur y a rien. pas de petit lumiere vert / orange qui dit qu il se charge, rien.
je pense que j'ai utilisé une mauvaise version de Windows mais je sais pas qu'est ce que je peux faire maintenant.
Est-ce que qq un a une idée ? est ce que j'ai effacé le ROM et il est complètement vide ?
Merci bcp

Before anyone will be able to answer any of your questions - need to answer a few questions
1. What model of qtek do you have ??
2. Where did you get the WM6.1 file from ??
3. Is your phone unlocked ??
There is basic info that is needed for a response to be given.
Help yourself before others can help you
Good luck
sptchi said:
Hello,
i wanted to upgrade my qtek win mobile 5 to win mobile 6.
I updated ROM and then I started update for mobile6 with WM6.1_netDrg_V3.5F_UP1.exe.
Update started and then my telephone shut down by itself and then nothing. Absolutely nothing. no light. I cant start it and no hard reset. when I plug it with charger no light of charging either. I think I deleted the ROM by mistake.
Does anybody have an idea ? What can I do?
Thanks a lot
Bonjour,
J'ai voulu installé mobile 6 sur mon qtek9100.J'ai mis à jour le ROM.
Après j'ai commencé le mis a jour avec win mobile 6 (avec WM6.1_netDrg_V3.5F_UP1.exe).
Le procès a commencé. quand mon tel était branché a mon ordi portable.
pendant installation il s'est éteint et après plus rien.
j'ai aucun lumière rien. je peux plus allumer. quand je branche avec le chargeur y a rien. pas de petit lumiere vert / orange qui dit qu il se charge, rien.
je pense que j'ai utilisé une mauvaise version de Windows mais je sais pas qu'est ce que je peux faire maintenant.
Est-ce que qq un a une idée ? est ce que j'ai effacé le ROM et il est complètement vide ?
Merci bcp
Click to expand...
Click to collapse

My telephone is QTEK 9100. I downloaded WM6.1 file from a web site that i don't remember. I did upgrade ROM and I arrived to menu
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
and I did "U" + restart + "C" + restart, so I did unlock.
And I just learned that I should charge my phone to more than 50% before upgrade. I didn't know that.
My charge was stg like 40%. I don't know if I just killed the battery or phone.
I still need help.
Thank you

sptchi said:
My telephone is QTEK 9100. I downloaded WM6.1 file from a web site that i don't remember. I did upgrade ROM and I arrived to menu
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
and I did "U" + restart + "C" + restart, so I did unlock.
And I just learned that I should charge my phone to more than 50% before upgrade. I didn't know that.
My charge was stg like 40%. I don't know if I just killed the battery or phone.
I still need help.
Thank you
Click to expand...
Click to collapse
If you do this on a g4 device you kill your phone.
check the spl version and post here for us.

I can not turn on my phone so I can not get any information from it.
So I dont know how i can find SPL version? But i think at the very beginning it was 1.7stg but then I upgraded it to stg( I followed the tutorial that I found from this site).

You need to try and find a way to get the phone turned on
Try pulling the battery out of the phone - wait a bit, and then put the battery back - do not try and turn it on right away, but plug it into the wall with the charger.
Not the usb cable to the computer - but the actual wall plug.
Does the light come on ?? Is it charging ??
If you cannot get power to the phone - it will be next to impossible to get any support or feedback.
Get back to us - good luck

sptchi said:
Hello,
i wanted to upgrade my qtek win mobile 5 to win mobile 6.
I updated ROM and then I started update for mobile6 with WM6.1_netDrg_V3.5F_UP1.exe.
Update started and then my telephone shut down by itself and then nothing. Absolutely nothing. no light. I cant start it and no hard reset. when I plug it with charger no light of charging either. I think I deleted the ROM by mistake.
Does anybody have an idea ? What can I do?
Thanks a lot
Bonjour,
J'ai voulu installé mobile 6 sur mon qtek9100.J'ai mis à jour le ROM.
Après j'ai commencé le mis a jour avec win mobile 6 (avec WM6.1_netDrg_V3.5F_UP1.exe).
Le procès a commencé. quand mon tel était branché a mon ordi portable.
pendant installation il s'est éteint et après plus rien.
j'ai aucun lumière rien. je peux plus allumer. quand je branche avec le chargeur y a rien. pas de petit lumiere vert / orange qui dit qu il se charge, rien.
je pense que j'ai utilisé une mauvaise version de Windows mais je sais pas qu'est ce que je peux faire maintenant.
Est-ce que qq un a une idée ? est ce que j'ai effacé le ROM et il est complètement vide ?
Merci bcp
Click to expand...
Click to collapse
As far as I can tell your rom is listed here
http://forum.xda-developers.com/showthread.php?t=409697
It is not a wizard rom but a rom for a Trinity phone, if it hard slp'ed your phone no longer knows what it is.
Anybody have any fix for this?
The french rom listed at
http://forum.xda-developers.com/showthread.php?t=423305
would have saved this headache
Sorry mate

C'est clair, c'est mort. T'as flashé une Rom de Trinity sur un Wizard, donc il y a fort à parier qu'il n'y ait rien à faire.
Bien mal t'en a pris de ne pas avoir lu les post-it et autres stickies correctement...
Désolé pour toi.
Basically, I confirm that he killed his phone by flashing a Trinity Rom onto a Wizard and that he should have read the stickies carefully before attempting anything...

Quiyaro said:
C'est clair, c'est mort. T'as flashé une Rom de Trinity sur un Wizard, donc il y a fort à parier qu'il n'y ait rien à faire.
Bien mal t'en a pris de ne pas avoir lu les post-it et autres stickies correctement...
Désolé pour toi.
Basically, I confirm that he killed his phone by flashing a Trinity Rom onto a Wizard and that he should have read the stickies carefully before attempting anything...
Click to expand...
Click to collapse
You win a lot of spare parts for HTC wizard

BUg Reboot Tel // bloqué logo motorla

Bonsoir.
alors voila, je ne sais pas si sa arrive à d'autres que moi, mais mon soucis est assez "chiant".
Le fais est que quelque sois la Rom que je met sur mon Defy, celui-ci Reboot sans cesse et ce, à n'importe quel moment.
Néanmoins, j'ai pu remarquer au bout d'un certains temps, qu'il rebootait " plus " lorsque je suis sur le point de recevoir un appelle ou un SMS.
Bref je ne sais pas comment gérer se soucis, surtout que parfois lors de ses reboot il ne se remet pas en "marche" tout seul et donc , il redemande le code pin. Ce qui est génant étant donné que je m'en sert comme Reveil. et lorsqu'il est en attente du Code pin et bien il ne sonne pas. ( Reboot lors de l'écoute de musique etc.. bref quand cela lui chante )
Alors si vous avez des idées n'importes lesquelles je suis prenneur.
PS: Je suis actuellement sous la Rom 3.4.2_145_finland.sbf Merci à vous.
De plus lorsque je flash avec une rom stock ( 2.21 ou 2.51 ) car je cherches a remettre mon tel avec celle ci pour l'envoyer au SAV. mon tel reste bloquer sur le logo Motorola Blanc.
Help svp.
Désolé si je ne suis pas dans la bonne section

Hello,
You have to speak english on on this forum man.
but i'll try to give you a solution....
Comme tu as flasher avec le sbf finland, tu ne peux downgrader, et donc tu ne peux pas reflasher un sbf d'un version antérieur, comme la 2.21 ou 2.51 (2.51 pour laquelle tu ne peux plus repasser en 2.21)
Cependant, si tu installes une rom 2.21 ou 2.34 à partir d'un backup nandroid, ca va passer (utilisation du clockwordmod), tu auras une rom d'origine mais avec un bootloader et un kernel du sbf finland.... apres tu pourras l'envoyer en sav, au pire il te reviendra sans intervention avec un devis, mais bon ils vont pas se prendre la tete
So i'll don't reply to this post anymore in french, only in english, so please respect all forum rules
and yes, you're not in the right forum section
good luck man,
bye

Ok i Will try in english but i'm not very good at it^^
So, i have try with a nandroid backup in 2.21 ( some one give me one) but when i restore this one and i try to flash with a stock rom ( 2.21 or 2.51 ) , i have the same problem.
It's always bock on the Motorola Logo. maybe some one can give me a Other nandroid backup? or tell me where i can get one
Ty.

drblood said:
Ok i Will try in english but i'm not very good at it^^
So, i have try with a nandroid backup in 2.21 ( some one give me one) but when i restore this one and i try to flash with a stock rom ( 2.21 or 2.51 ) , i have the same problem.
It's always bock on the Motorola Logo. maybe some one can give me a Other nandroid backup? or tell me where i can get one
Ty.
Click to expand...
Click to collapse
Hi,
Ok that mean you can't downgrade after flashing original finland sbf....
Don't you try to reflash with finland sbf, root it, install clockworkmod and restore a 2.21 or 2.34 nandroid backup only , and don't flash with 2.21 or other sbf ?
good luck

I'm actually with the finland sbf. but i want to send my defy at the SAV because he reboot too mutch by day.
so i have to be in 2.21 no?
2.34 i don't know this one. some one can send me ?

Up. please

Infocus M512

Infocus M512 Notable Specs:
5" 720p IPS Display
Android 4.4 Kitkat
Snapdragon 400
LTE/4G
Corning III Gorilla Glass
NFC
Where I bought mine: http://www.pandawill.com/foxconn-in...0-50-inch-gorilla-glass-nfc-white-p91662.html
I highly recommend this device if you're on a budget as this is ALOT of value for $158 USD. The build quality is quite impressive, as I'd expect from Foxconn (the company behind iPhone construction) and I haven't had any issues with it.
Now as a power user I wanted to root it ofcourse and there is a way to root it but theres notreally an explanation on how to root it so I figured I'd post the steps, but the original thread is located at: http://www.needrom.com/download/infocus-m512 and I'd like to thank [email protected] for making the root image
Now to the rooting.
When you first get your M512 you'll need to upgrade its firmware.
Go to settings > About Device > Software update > Update. There should be an update, let it do its thing. It will reboot and the firmware will be updated.
If this doesn't work for you, you can do it the manual way from the official website - http://www.infocusphone.com/m512updates.html. Download 1080_0_15CN, use google translate to help you navigate. It should be about 800MB. Now boot your phone into Download Mode by pressing the Power + Volume Up button and then selecting the zip you just downloaded and flashing it. Now for me I couldn't get my phone to boot into download mode this way so I had to boot it into download mode by fastbooting with my computer.
Once you've updated to the latest firmware now you can go along and Flash the ROM from http://www.needrom.com/download/infocus-m512 which will Root your M512.
To do this you'll need to download the Android SDK and then navigate to sdk > platform-tools. Extract the rom you just downloaded into this folder. Now connect your device to the computer, make sure USB Debugging is on (in developer options) and let your computer install any usb drivers if necessary. Also make sure your device is connected as MTP.
Now there should be a file called: InFocus_M512_15CN_1_03A国际版.cmd, double click that and let it run, It should boot your device into download mode and when your device reboots its done!
Check to see if you have SuperSU installed - if you do, its worked and you're rooted
As of now there's no way to install a Custom Recovery or flash a custom ROM but maybe someone will develop one.

Problems
Hello friend, I bought this same phone in pandawill too. After doing all you did I had a proble, a pop up window asking me for an upgrade showed up suddenly and I click ok by mistake. The upgrade started but it stopped. Now the phone doesn't start. I want to know how to flash it into download mode or something like that in order to restore the phone.
Besides, I had 1,75gb of free room in internal memory and I found out how to install data in sd card. Actually I had many heavy games, Sygic with many maps...
If you can tell me what tools to use to try I will appreciate it.
Thank you in advance.

Was it an upgrade over Wi-Fi? Why did it stop half way... Did u you lose internet connection?
Sent from my LG-D802

Hi GalaxyWhy, is there anyway to use external sdcard for more internal memory?

Hey Migz71, I've used this technique to delete the Chinese bloatware off my phone and then linked my apps to the sdcard. But hopefully we'll be getting either a Miui or Stock ROM in the coming weeks (which will give us more internal space) ?
Sent from my LG G2 running CloudyG3

GalaxyWhy said:
Hey Migz71, I've used this technique to delete the Chinese bloatware off my phone and then linked my apps to the sdcard. But hopefully we'll be getting either a Miui or Stock ROM in the coming weeks (which will give us more internal space) ?
Sent from my LG G2 running CloudyG3
Click to expand...
Click to collapse
I have read in htcmania that one user use foldermount to solve the problem with the memory, because the phone has 4 GB but 2 GB it use like a emule sdcard, with that is not necessary use a external sdcard but you lost 2 GB. In my xiaomi Mi Pad 16GB I had the similiar problem and I solved with SDFix and for the bigger games I use Link2sD, but only with SDFix was enough.
The user in htcmania say that he solve with foldermount to link the folder from 2GB partition sdcard with the external folder to external sdcard. Here is one link http://forum.xda-developers.com/showthread.php?t=2192122,
Have anyone tried it ? or SDFix I think is easier .
Is a shame because the phone has a great hadware for this price but software and scene is rubbish.
I´m between this phone and xiaomi red 1s, I know that xiaomi has a good support and a nice room but luck 4g, and the battery is worst, really i don´t know what to do ... are you happy with this movil the gps and 4G works fine?

Thanks for that, it worked great! There's less space available on the internal memory on the phone since rooting it. I had about 1GB with the stock rom, now there's about 260MB. I've removed the unwanted app's etc., but I don't see what's taking up the space. Did you notice anything similar on your phone?

Hey niallcs check out this thread for further discussion: I'd recommend flashing MIUI, I get 2gb free internal space
http://forum.xda-developers.com/showthread.php?t=2856956
Check out this thread for details
Sent from my LG G2 running CloudyG3 ?

Great, I'll take a look. Thanks again!

Password extraction ?
GalaxyWhy said:
Infocus M512 Notable Specs:
Now to the rooting.
When you first get your M512 you'll need to upgrade its firmware.
Go to settings > About Device > Software update > Update. There should be an update, let it do its thing. It will reboot and the firmware will be updated.
If this doesn't work for you, you can do it the manual way from the official website - ".infocusphone.com/m512updates.html%EF%BB%BF". Download 1080_0_15CN, .
Click to expand...
Click to collapse
Hi,
Download needs password .
How to get this code please.
Thanks

Aflaoui said:
Hi,
Download needs password .
How to get this code please.
Thanks
Click to expand...
Click to collapse
There should be a short four-character password listed with the ROM in parentheses to the left of the download button - currently it shows for me as "a2tb" for the full package. I don't know if that's set or if it changes, but take a look and see.

Update problem
Hello, I am french and not very good in english so sorry for my bad English.
I try to update my infocus to firmware 1080_0_15CN ... but it's imposible from my Infocus settings so I try to do that with the download mode, but when I try your magnipulation my phone switch on normally and even with ADB using the command " adb reboot download" it's the same results !
Please help me, thanks.
Soferendo

Download mode with M512 ?
Matrey_Moxley said:
There should be a short four-character password listed with the ROM in parentheses to the left of the download button - currently it shows for me as "a2tb" for the full package. I don't know if that's set or if it changes, but take a look and see.
Click to expand...
Click to collapse
Thank you - it's ok
But...
"Now boot your phone into Download Mode by pressing the Power + Volume Up button ..."
This method does not work on my smartphone
Help
---------- Post added at 08:08 PM ---------- Previous post was at 07:53 PM ----------
Soferendo said:
Hello, I am french and not very good in english so sorry for my bad English.
I try to update my infocus to firmware 1080_0_15CN ... but it's imposible from my Infocus settings so I try to do that with the download mode, but when I try your magnipulation my phone switch on normally and even with ADB using the command " adb reboot download" it's the same results !
Please help me, thanks.
Soferendo
Click to expand...
Click to collapse
Bonjour,
J'ai aussi le même problème: impossible de passer en mode Downlod par POwer+Volume haut
qu'est ce que ADB stp ?
Et de toute facon le téléchargement de ce firmware prend un temps fou et qui vient de ce planté à 64% ! grrrrr
Si tu as ce fichier un partage via DRIVE ou autre ? ce serait sympa

Aflaoui said:
Thank you - it's ok
But...
"Now boot your phone into Download Mode by pressing the Power + Volume Up button ..."
This method does not work on my smartphone
Help
---------- Post added at 08:08 PM ---------- Previous post was at 07:53 PM ----------
Bonjour,
J'ai aussi le même problème: impossible de passer en mode Downlod par POwer+Volume haut
qu'est ce que ADB stp ?
Et de toute façon le téléchargement de ce firmware prend un temps fou et qui vient de ce planté à 64% ! grrrrr
Si tu as ce fichier un partage via DRIVE ou autre ? ce serait sympa
Click to expand...
Click to collapse
Bonsoir, alors ADB est un utilitaire à installer sur pc
Pour l'installer suis ce tuto: http ://ww w.phonandroi d.com/forum/installer-en-15-s econdes-adb-fastboot-les-drivers-de-votre-appareil-android-win-t8 4129.html ( je ne peux pas mettre de liens donc j'ai mis des espaces.)
Ensuite ADB et le reste de ces logiciels te servent à contrôler ou donner des ordres à ton téléphone via ton PC, alors tout d'abord active le mode debeugage USB de ton Infocus.
Ensuite installe les pilots, quand tu et que tu es en mode debeugage USB ton pc te propose d'installer quelque chose, ce sont les pilotes.
Quand tout ceci est fait, tu ouvres une invit de commande CMD et tu tapes ceci ( ton téléphone doit être connecter avec le debeug USB activer) "adb reboot download" et ton téléphone redémarre en mode download.
Voici que que j'ai appris à faire grâce à plusieurs tutos, mais moi mon infocus redémarre normalement, après si pour toi cela fonctionne c'est niquel
Je mettrais le fichier sur un hébergeur dès que je serai sur mon Pc, demain matin normalement !

Téléchargement du MC2...zip ??!!
Soferendo said:
Bonsoir, alors ADB est un utilitaire à installer sur pc
Pour l'installer suis ce tuto: http ://ww w.phonandroi d.com/forum/installer-en-15-s econdes-adb-fastboot-les-drivers-de-votre-appareil-android-win-t8 4129.html ( je ne peux pas mettre de liens donc j'ai mis des espaces.)
Ensuite ADB et le reste de ces logiciels te servent à contrôler ou donner des ordres à ton téléphone via ton PC, alors tout d'abord active le mode debeugage USB de ton Infocus.
Ensuite installe les pilots, quand tu et que tu es en mode debeugage USB ton pc te propose d'installer quelque chose, ce sont les pilotes.
Quand tout ceci est fait, tu ouvres une invit de commande CMD et tu tapes ceci ( ton téléphone doit être connecter avec le debeug USB activer) "adb reboot download" et ton téléphone redémarre en mode download.
Voici que que j'ai appris à faire grâce à plusieurs tutos, mais moi mon infocus redémarre normalement, après si pour toi cela fonctionne c'est niquel
Je mettrais le fichier sur un hébergeur dès que je serai sur mon Pc, demain matin normalement !
Click to expand...
Click to collapse
Bonjour,
Merci pour ces précisions.
Pour l'instant je galère avec le téléchargement du firmeware MC2... (603 mega)
Déjà un planté au 2/3 puis un autre quasiment vers la fin et ce matin temps estimé 2 à 3 jours...
Je désespère.
J'aurai un nouveau smartphone avant de pouvoir flasher celui là !!

Dowload Mode : LA METHODE
Soferendo said:
Hello, I am french and not very good in english so sorry for my bad English.
I try to update my infocus to firmware 1080_0_15CN ... but it's imposible from my Infocus settings so I try to do that with the download mode, but when I try your magnipulation my phone switch on normally and even with ADB using the command " adb reboot download" it's the same results !
Please help me, thanks.
Soferendo
Click to expand...
Click to collapse
Bonjour,
Pour obtenir ce mode faut être plus têtu que l'appareil!
Appui long sur la touche power : cliquer sur Eteindre
Appui long sur Vol+ et Power et maintenir : deux redémarrages consécutifs vont se produire
On garde son calme et les touches toujours enfoncées !
Il doit ensuite affiché (normalement) le mode download

Merci de ta réponse si rapide !
Alors je fais exactement ce que tu me dis ! Quand je le démarre avec Power+volume il affiche infocus, s'éteind ! Mais ne se rallume pas --"
Help me plizzzzz !

Mode download : précision
Soferendo said:
Merci de ta réponse si rapide !
Alors je fais exactement ce que tu me dis ! Quand je le démarre avec Power+volume il affiche infocus, s'éteind ! Mais ne se rallume pas --"
Help me plizzzzz !
Click to expand...
Click to collapse
Il semble nécessaire de faire cette manip cable USB branché et mode debug bien sur
Est-ce OK ainsi ?

Oui j'ai déjà essayer et mon téléphone redémarre normalement ....
Merci de ta réponse

A quoi sert adb reboot download
Aflaoui said:
Il semble nécessaire de faire cette manip cable USB branché et mode debug bien sur
Est-ce OK ainsi ?
Click to expand...
Click to collapse
Mais adb ne fait que redémarrer l'appareil - je ne vois pas l'intérêt de cet outil hormi l'instal des drivers...
Pour info j'ai enfin le fichier ZIP.
Je l'ai copié sur la carte microSD
J'ai lancé l'install via le mode download - En cours ..........