Question about the PTT button..... - Touch Pro, Fuze General

If you go to settings --> personal --> buttons, you'll find that you can assign programs to buttons, and the first two is PTT (Push to talk).
Well, i've never really used this, but the PTT button on a HTC Touch Pro is the middle circle button right?? I tried to hold it down but nothing comes up, by default the camera should show up.
I tried the other buttons like the pick up call button and it brings up the task manager, so that works, but i can't get the PTT to work....

The PTT button is an extra button for the htc fuze, that AT&T had HTC put on so they could provide "easy" access to their Push-To-Talk service. It costs money to use, so most people would remap it to launch other apps.
It is on the left hand side when the screen is facing you, under the volume rocker.
Here is an image I pulled from WMexperts

thanks a lot for your reply. Ahh no wonder i can't find it, my Touch Pro doesn't have it

Related

Button Mappings - So Far So Good!

Guys, this is what I have done with my button mappings and so far it seems to be working reasonably well. Well, reasonably enough that I am happy with it/can live with it.
Now I am very nit-picky and am coming from a heavily customized WisBar world. But in my quest to be stylus-free (and loving the WOW-factor of TF3D), I am able to live with the device by making the changes listed below.
-+-+-+-+-+
1. AEBPLUS - Volume Buttons
o Remapped volume buttons to provide Up/Down scrolling
o HOLD volume up or down - normal volume control
I did this because the TP was rejecting calls on its own whilst in my holster -- you know, the "press any volume button to mute the ringer" feature.
Note that if you do this, don't forget to look at the "Restore Volume Slider" option in AEBPlus (that guy thought of everything). I have all of mine unticked. Also take a look at: Options|Other Options|Control Volume Directly.
Screenshot: http://auxiliary.razer7.com/aevolume.png
··········
2. AEBPLUS - Phone Key ("Green Phone Button" in AEBP)
o Press once = Phone Button
o Press twice = Task List (Swipe left shows Programs)
o Press three times = Action List <-Note the Cut/Copy/Paste here!
Screenshots:
Task List: http://auxiliary.razer7.com/tasklist.png
Task List - Swipe Left: http://auxiliary.razer7.com/programs.png
Action List: http://auxiliary.razer7.com/actionlist.png
ABOUT THE TASK LIST: The Task List (and Programs list) is all touchable. AEBPlus provides its own task list as well but it isn't as nice as the one that I am using nor is it fingerable. The one that I am using is a freeware program called "MortButtons".
Download MortButtons here:
http://www.sto-helit.de/index.php?module=download&action=list&category=13
NOTE: Don't forget to also download the "ClickLED" skin on the same page. This skin closely matches the TF3D colour scheme.
During my testing, I've noted that MortButton uses about 250K (if you decide to leave it resident (recommended!)) and zero CPU since it is being called by AEBPlus.
ABOUT THE ACTION LIST: The "Action List" (as pictured above) is part of AEBPlus and can be custom-catered to your liking. I like to keep it simple and simply have cut, copy and paste in there, as well as toggle Wi-Fi (which works on the TP).
··········
3. AEBPLUS - End Call Button ("Red Phone Button" in AEBP)
o Press once = End Call
o Press twice = Last Task (ALT-Tab)
o Press thrice = Call DinarSoft TapText*
* "TapText" is a little utility that allows you to create a menu with clippings in it. I used it for email addy's and more. Check it out. I find it very useful and worth the ten bucks to register.
Screenshot of TapText in action: http://auxiliary.razer7.com/taptext.png
-+-+-+-+-+
4. About the Home and OK Buttons...
Now these two buttons *can* be mapped using AEBPlus, however, they can't be *re-mapped*.
In other words, if you map something to these buttons, they will also perform their inherent functions (i.e. the Home button will always go home first; the OK button will always send an OK message to the system, etc.)
Personally, I have left these two alone.
-+-+-+-+-+
CLOSING COMMENTS:
Now there is MUCH MORE you can do with the above two apps in the configuration I've described. Customize it to your delight.
I hope that this post helps some of you guys out. I need to give back to this community!
This community R0X.
Thanks for sharing. Will try this out as soon as possible.
You're very welcome!
I was playing around with this setup earlier today and so far, it has been working really well.
Take care.
I have AEBPlus and it is working great. My home key is mapped to be the start menu on a single press and torch on a long press, the back button closes active applications on a single press. My soft keys are mapped to lock the device and contacts. Works perfectly for me.
I'd already re-mapped the volume buttons as you did, though for a different reason. I use MS Readern often, and find the circular direction button on the TP pretty useless - I try to press arrow down and get the centre keypress instead more often than not. The volume buttons are a perfect substitute.
On tip though - when mapping the volume buttons it works best if you map double click and triple click to none. Doing otherwise gives confusing results.
Excellent post Minus-1, AEBPlus is a program I'd been looking for since getting my touch pro and the Mortbuttons program is proving to be a very useful program itself. one q though on the button options list in AEBPlus which ones cover the touch pros 'home' button and '<-' button
grezz said:
On tip though - when mapping the volume buttons it works best if you map double click and triple click to none. Doing otherwise gives confusing results.
Click to expand...
Click to collapse
Absolutely. I have only single click (directional up or down) and press-and-hold (volume control).
I often double-click the volume button to move up two elements, etc.
Excellent tip. Something definitely worth noting!
P.S. One quick note about the smartwheel: I used to HATE it but now I LOVE it. U have to get used to it and memorize the length of your stroke, etc. Once you do, tho, honestly, doing things become a breeze (especially whilst reading RSS).
yan2k said:
Excellent post Minus-1, AEBPlus is a program I'd been looking for since getting my touch pro and the Mortbuttons program is proving to be a very useful program itself. one q though on the button options list in AEBPlus which ones cover the touch pros 'home' button and '<-' button
Click to expand...
Click to collapse
Hiya, Yan2K!
I'm glad that you're enjoing AEBPlus and MortButtons.
In AEBP, the '<-' is mapped as the "OK Button" (which is precisely what that button means; some people like to call it the "back button" but it actually send a WM_OK message to the system).
As for the HOME button, you will have to map it...
In AEBPlus, go to the FILE|ADD BUTTON menu entry and press your HOME button. The TP will go back to the home screen but don't worry -- AEB is still running. Just click on your Quick Menu in the home screen (upper right corner of your task bar) and switch back to the AEB task.
Now remember: if you map these two buttons, they will NOT unmap their original functions... I generally leave these two buttons alone m'self.
Cheers!
thanks for the quick reply. I've created the 'home' button as you instructed, ended up with 'button #00ED' but cant get it to do anything either on 1-2-3 or long button press nor can i get the 'ok/<-' button to do anything either. prob doing something stupid can you help? ideally i want to be able to run a program on a long 'home' key press
Well mine is working, but not when TF3D is the active application. I remaped the (Long press) Home butoon to Second Today, and when I press it (long) it opens Second Today. Again, only when the TF3D is *not* the active program.
Hope that makes sence...
Cheers,
Cacti
yan2k said:
thanks for the quick reply. I've created the 'home' button as you instructed, ended up with 'button #00ED' but cant get it to do anything either on 1-2-3 or long button press nor can i get the 'ok/<-' button to do anything either. prob doing something stupid can you help? ideally i want to be able to run a program on a long 'home' key press
Click to expand...
Click to collapse
Mapped the volume buttons as you did. Just what I was looking for. Also set 'back' to proper 'ok/close'.
Cheers.
I think,the original functions are hardcoded somewhere(dll or something else). We need to find the file and modify it to disable these functionalities.
I remapped the "green" button the following way:
1 press) Phone application
2 presses) Alt+Tab
However, now when there is an incoming call I can't use it to answer. Which is quite logical.
Is there a way around this?
le_cactus said:
Well mine is working, but not when TF3D is the active application. I remaped the (Long press) Home butoon to Second Today, and when I press it (long) it opens Second Today. Again, only when the TF3D is *not* the active program.
Hope that makes sence...
Cheers,
Cacti
Click to expand...
Click to collapse
played around with it and found purely by chance that just like you said you cant use the home button or '<-/ok' button to do anything when you've actually got the TF3D home screen showing. hopefully someone will come up with a workaround for this as although i can make use of the '<-/ok' button it pretty much makes the 'home' button redundant for anything else but its original purpose
yan2k said:
played around with it and found purely by chance that just like you said you cant use the home button or '<-/ok' button to do anything when you've actually got the TF3D home screen showing. hopefully someone will come up with a workaround for this as although i can make use of the '<-/ok' button it pretty much makes the 'home' button redundant for anything else but its original purpose
Click to expand...
Click to collapse
Oh man, the OK button is one of the buttons I miss the most.
Specially while texting and such.
I hope I can remap some of the full keypad buttons as well.
I noticed that it sometimes doesnt' start up well, but oh well.
I re-maped the volume down to Ok/Close and Volume up to Start Menu
Then changed the volume settings to long hold, Which half the time when i press the buttons the volume comes up. haha.
hello!
I want to remap some buttons and I've tried with AE button Plus without success. Can you help me?
What I have is the call button configured for a long press to cyberon voice dial.
The disconnect button long press is for vibrate / ring.
what I want is to turn home and back buttons long press to wifi and bluetooth on/off and.
is it possible?
can I do this without AE button +? like a registry change? would be even better... or another program suggestion is also a good help!
Please help!
deiota
Is it able to remap the PTT button? That would be AWESOME.
dumb question, but where can I download AEB Plus?
I can't find a direct link or site to get the program!
Thanks...
http://ae.inc.ru or ask directly the author AE(here on XDA-Alexander Eltsyn).
So, is there any way to change the mapping on my keyboard? Like the hot button keys really get in my way, and I'd rather have a TAB key than a CAPS key, and stuff. So is this possible yet?

Need help with AE Button Plus

I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
guitarlp said:
I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
Click to expand...
Click to collapse
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
noellenchris said:
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
Click to expand...
Click to collapse
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
remap soft keys on HOME screen of TF3D
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
bmarkoff said:
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
Click to expand...
Click to collapse
Use advanced config and you can set them that way. You have to soft reset aftewards...
guitarlp said:
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
Click to expand...
Click to collapse
There is a new version of AEBPlus out, however it still doesn't get along with the Fuze very well. I Finally uninstalled it and am happy with short/long press only on the PTT. I also run GScroll and use it to double touch the capacitive screen to launch stuff...much better...
home soft keys for PI8
please explain where in Advanced config do I go to change a setting for the 2 soft keys for the home screen. I can't find anything. I found it in Diamond tweaks under 14.5 but it does not give me an option to select PI8.
The long keypress for Green button can be solved by standart button settings as a "Button1(Hold)". I have mapped for a longpress the phone interface that way(1click I use as Alt+Tab). I don't know about red button,because I use red button to instantly drop the call and this feature is missing in my version of AEBPlus and I don't need to upgrade.

Change Volume buttons to scroll buttons

Hi all,
Been looking around for a way to change my volume buttons so that i can use it to scroll up and down (using goodlink and everytime i click on a item it goes into that item and not do a show preview on the preview panel)
Does anyone know of a bit of kit that would do this job? Have looked at "advanced config" but cant seem to find a way to change/map the volume buttons to make them scroll up and down a list.
Thanks
Sorry all...looks like i answered myy own question. Finally found the below to sort out what i need and it works with the topaz!.
Sorry for the same and FYI the thread is below.
http://forum.xda-developers.com/showthread.php?t=409243&highlight=remap+volume
"What works for me is AEButton Plus (payware, no affiliation). I have reconfigured my volume buttons to single press = arrow up/down and long press to volume. The program has a nice function: you can choose to let the volume buttons have their default behavior during a phonecall.."
Fine, thank u. And it works on your Touch Diamond 2 Topaz?
yep works a treat on my Diamond 2 topaz
...i do have netcf 3.5 installed before i installed AE buttons aswell for other programs (not sure if that will matter for AE buttons)
im not really getting along with it.
cant see the optino for changing what the volume keys do etc.
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
Hmm, interesting thoughts! Especially if the remap is done automatically, and only when the camera is launched.
Regards,
PK
toady2k1 said:
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
Click to expand...
Click to collapse
I believe this issue with scrolling will be resolved with WM6.5 when you can slide the bar up/down to do a selection. In the meantime I use a simple method to scroll/select - say a SMS message. I open the abc phone pad (icon at bottom of screen) and then use the up/down keys (at the bottom) to scroll.
AE Button Plus
Just to confirm.. AE Button Plus DOES allow you to remap the volume buttons to up/down arrows. Just installed it on mine (Touch Diamond 2) and it works perfect.
The setting-up routine isn't obvious though.
When you see your list of keys in AEBP, pres and HOLD on the "Volume up" item. Takes a few seconds for the config menu to pop up.
I then used the following options from the config screen:-
3. Handle by AEBPlus
1. Single Press
5. Press Up arrow key
Then do the same for the Volume Down key, obviously changing the last option to 6. Press Down arrow key.
Then File/Save & Exit, and off you go.
paalkr said:
Originally Posted by toady2k1 View Post
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
--->
Hmm, interesting thoughts! Especially if the remap is done automatically, and only when the camera is launched.
Regards,
PK
Click to expand...
Click to collapse
Very interested in this one =) anyone found a way to do this?
sorkig said:
Very interested in this one =) anyone found a way to do this?
Click to expand...
Click to collapse
Try this...
http://forum.xda-developers.com/showthread.php?t=555821
This program can assign any of the hardware buttons to do what you want...
I've set the back button Launch the 'camera' app if it is held for a while and to act as the capture button when taking a picture. It also acts like a normal 'back' button when in other apps such as file explorer,opera, etc.
toady2k1 said:
im not really getting along with it.
cant see the optino for changing what the volume keys do etc.
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
Click to expand...
Click to collapse
Using the software provided in this thread it's possible:
http://forum.xda-developers.com/showthread.php?t=555821
See this thread where I explain how to do that:
http://forum.xda-developers.com/showthread.php?t=557546
Works like a charm!!
You can remap all your hardware buttons.
Cheers
Can some one post AEBPlus.cfg/ Button registry
I copy my button's from att tilt ( registry exported adn imported thru back up and restore process) so now on my Pure I have many buttons. Can some post their AEBPLus.cfg adn button registry export?
v3patel said:
I copy my button's from att tilt ( registry exported adn imported thru back up and restore process) so now on my Pure I have many buttons. Can some post their AEBPLus.cfg adn button registry export?
Click to expand...
Click to collapse
This program is much better than AEB.

Quickest way to reach camera

I am a Touch Pro which does not have a PTT button.
Any suggestions on how to reach the camera quickly? What is your quickest way to get to the camera?
remap the center button on your phone to start up camera
mobileSCR Gscroll, map the capacitive area of the screen(where the buttons are), really useful(can choose any sequence of taps to do anything, open application)
or AEButton... what' the use of a volume rocker? just use one button to get to the volume page and use the touch screen to change the setting...(one problem would be changing vol on the fly like during a phone call... that case, change the setting, one-button press = default volume behavior, two-button press = whanever you want, three -button, long press, whatever you want
mputtr said:
remap the center button on your phone to start up camera
Click to expand...
Click to collapse
Thanks! I will try to do this but I cannot find the built in remap ap on NRGs rom, still looking for it :-D
@paperWastage: Thanks for the tip! If I cannot find the built in software I will install AE buttons.
you cant remap the center button. i think he was being pedantic. maybe you can set a button to be voice command and say "start camera".
I just have the camera in the programs... Slide over to programs and press camera...
The Jack of Clubs said:
you cant remap the center button. i think he was being pedantic. maybe you can set a button to be voice command and say "start camera".
Click to expand...
Click to collapse
actually... i was serious. There is a fuze keyboard config software floating somewhere in the raphael forums. It might be able to let you remap the centerbutton.
but why would you want to remap your center button.
The Jack of Clubs said:
but why would you want to remap your center button.
Click to expand...
Click to collapse
I have to agree as this is a very important function.
Mayne a Long press center button maybe more appropriate.
I cant seem to find any remap built in software on the NRG rom. My Touch dual had one which allowed me to remap some basic buttons like volume button.
Looks like AEbuttons is the answer for me. Will try to test it first and update you guys.
If you go to Setting and on the Personal Tab there is a Buttons setting and you can change the receive call button (press and hold of course) to whatever you want, including the camera.
Also a good idea to go over to the Systems tab and change the Long Press End Key Setting to Lock Device or something else than Turn Airplane mode on/off, god that sound is annoying when Airplane mode is turned on
it depends on the rom or software if you have the unlocked all buttons. honestly theres no faster way to get there than start > camera or photos tab > camera. if you dont have an american phone with a ppt button, there wont really be a faster way.
i actually did not mean to map the single click. I thought it was obvious i meant the long press.
using softkey manager you can replace one of the softkeys on the homescreen, as ur using an NRG rom im guessing your two softkeys on the home tab are "action" and "contacts"? ive got rid of the contacts, because a. i could jus use the people tab, or b. jus press the call button to bring up the dialer... and have replaced it with camera
the softkey manager should be under utililites/tweaks... it is on mine and im using an NRG rom
hope this helps.

Your take on the perfect (Android) button placement?

Back button on the far left? Second from the right?
Power button on the top? On the side?
Softkeys or real buttons? On-screen (a la Honeycomb) or off-screen?
Do we need a search button at all?
A lot of sweat, blood, and saliva has been spilled over it. [citation needed]
Now it's *your* turn to join the fray!
If you were to design *the* perfect Android phone, what buttons would you give it? And where? And what would it be like?
Or maybe you don't even care about how the buttons are placed, as long as the manufacturers could just agree and they all make devices with similarly-placed buttons?
Me? I'd personally place the buttons sorted by their frequency of use, starting from the leftmost to the rightmost (from the most natural to the most awkward for my thumb to press). Back button - Home - Menu - Search, from left to right.
But I see how this would be an issue to left-handed people, so I'd settle for Back and Home button in the center, and Menu and Search flanking them. That's fair enough I think.
I would love to experiment with placing the back button on the top of the left side of the phone (indexable for right-handed people, and thumbable for left-handed), but I can see how this is not for everyone I'm not even sure I'd like it.
However, if manufacturers could just agree on the placement of the buttons, that would be good enough for me.
Whether it's hardware buttons or touchscreen buttons ain't an issue to me.
I'd place the power button top center (index-fingerable).
I find volume buttons useful only during calls, so I'd like to have them function as volume buttons only during calls. During idle/homescreen/any other scenario, they would become two (customizable!) shortcut buttons (a la Blackberry). <-- if only one thing from my dream phone is manifested, I hope it's this one. Two wasted (and often pressed by accident) buttons, turned into something more useful.
If I wanna be detailed about it, I guess the volume buttons should be on the center of the right side of the phone, so one of them can be customized as shutter/camera button (although I wont use it as such, preferring to tap the screen instead).
How's yours?
I think power button on top right side, lock button under, or like you mentioned having them function as volume buttons during call. Do completely away with search button, add in maybe a camera button where my search is, but make it where you have to hold it for a second so you do not enable it accidently. Have a designated capture button for the camera, that also functions as a silent/vibrate setting out of the camera.
Sent from my SCH-I500 using XDA App
Different people, different preference. Perhaps a default Home key, + 2 customizable keys where the user can choose their preferred key to be assigned.
I'd have the Search Key and Back Key always on the screen.
Menu key shouldn't even be on the phone. That should force app developer to design and create user interface with menu function incorporated in their app for consistency purpose.
I would love to have buttons on the back of the device
Now that I'm getting used to honeycomb (and apps developed for it), i can assure you that the search and menu buttons are not really necessary. i'd want a device with a back button on the left, the home button in the middle and a end call / power button on the right. that's it. oh i actually forgot a volume rocker at the usual spot at the side of the device.
Dustin.Dwayne said:
I think power button on top right side, lock button under, or like you mentioned having them function as volume buttons during call. Do completely away with search button, add in maybe a camera button where my search is, but make it where you have to hold it for a second so you do not enable it accidently. Have a designated capture button for the camera, that also functions as a silent/vibrate setting out of the camera.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Hmm.. No search button.. Interesting.
I find it useful to search things from the homescreen without having to open a particular app first (be it Market, Springpad, Contacts, Evernote, etc.), but I can surely live without it
albling said:
Different people, different preference. Perhaps a default Home key, + 2 customizable keys where the user can choose their preferred key to be assigned.
I'd have the Search Key and Back Key always on the screen.
Menu key shouldn't even be on the phone. That should force app developer to design and create user interface with menu function incorporated in their app for consistency purpose.
Click to expand...
Click to collapse
Customizable keys FTW!!
JuanDeaux said:
I would love to have buttons on the back of the device
Click to expand...
Click to collapse
Wouldn't that be awkward, Mr. Doe?
fabsn said:
Now that I'm getting used to honeycomb (and apps developed for it), i can assure you that the search and menu buttons are not really necessary. i'd want a device with a back button on the left, the home button in the middle and a end call / power button on the right. that's it. oh i actually forgot a volume rocker at the usual spot at the side of the device.
Click to expand...
Click to collapse
Oh, you even made the pic!
Your opinion is interesting. I can easily see why the search button isn't really necessary, but the menu button? Substituted by long-press, I presume? (I never tried Honeycomb for any longer than 2 minutes )
I'm beginning to get glimpses of what ICS is gonna be like Keep it coming, guys! Let's crowdsource this!
Thanks to the moderator who moved my thread. I was hesitant on where to put my thread, but finally decided on the "General" forum, even though my OP contains questions, because I thought it was more of a "discussion" thread instead of a particular question trying to uncover a particular answer (which is what Q&A usually is)

Categories

Resources