I am trying to flash my Orange SPV E650, I Run SDA Apllication Unlock and get message 'Phone is unlockable' Can anyone help I have had the Sim Unlocked with no problems.
cyrixuk said:
I am trying to flash my Orange SPV E650, I Run SDA Apllication Unlock and get message 'Phone is unlockable' Can anyone help I have had the Sim Unlocked with no problems.
Click to expand...
Click to collapse
Have you tried it manually?
Change or create these registry values:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 222 (or 40?)
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001006 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 16 (or 144?)
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101a" = 1 (dword)
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b" = 1 (dword)
You need to use this first
http://spvunlock.rd.francetelecom.com/
when they send you the cab file remove the security and turn off the handset and on again, reinstall the cab again then it should work
if you are wondering why you need to install the cab twice its because for some reason on a first install the security sometimes remains active
belrei said:
Have you tried it manually?
Change or create these registry values:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 222 (or 40?)
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001006 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 16 (or 144?)
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101a" = 1 (dword)
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b" = 1 (dword)
Click to expand...
Click to collapse
Can I unlock sim by registry?
Heniek_W said:
Can I unlock sim by registry?
Click to expand...
Click to collapse
No, not to my knowledge. You have to pay for an unlock code.
Related
I've had a number of problems trying to unlock my phone (not the sim) to be able to install certificates, to register unsiged dll's.
After a good look around I finally found this very simple solution:
Using a registry editor, like RegeditSTG, modifiy the following entries:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 2
Change the value data from 2 to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 16
Change the value data from 16 to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 128
Change the value data from 128 to 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies
Add new value "0000101b": Dword = 1
After this, close the reg edit application using task manager, and reboot you phone.
the values on my xda are different
00001005 = 10 00 00 00
00001017 = 80 00 00 00
instead of those listed above, is it still ok to change them to what it says above ?
RegeditSTG
@ashley_ings
i tryed 2 install RegeditSTG but get the message that my system policies doesnt allow the installation of this , in the properties i c that RegeditSTG is signed by HTC
With PHMreg i can go to the described reg entry and they ar the same as in youre tutorial but when i change the value´s i got the message that im not allowed to do this
i got a qtek 8300 rom ver, 2.0.8.0 operator 2.6.312.4
can y plz help me with this
greetingz
Wim
wimschef said:
@ashley_ings
i tryed 2 install RegeditSTG but get the message that my system policies doesnt allow the installation of this , in the properties i c that RegeditSTG is signed by HTC
With PHMreg i can go to the described reg entry and they ar the same as in youre tutorial but when i change the value´s i got the message that im not allowed to do this
i got a qtek 8300 rom ver, 2.0.8.0 operator 2.6.312.4
can y plz help me with this
greetingz
Wim
Click to expand...
Click to collapse
Me too. I have same problem with RegeditSTG trusted by HTC on a SPV-C100. I can't start it and I get a message,that it is not signed by fuc.ing Orange! PHM regedit(which is the same,but not trusted by HTC) I am able to run,but it doesn't allow me to modify values. Fuc.ing hell! Who should have access for all the features instead of me? Orange? I don't understand this stupid policy,because it degrades 70% of the functionality of the phone.
Sucks!
Any idea how to solve?
does this solution will also unlock wap settings from the provider or not?????
cuz i have an orange c600 and i have unlocked this phone but wap settings are still locked on orange
do i really need to install rom to unlock wap settings ?????
if yes
then please suggest which rom i should do now??
thanking you in anticipation
Awais Ghouri
unlocking Cing 2125 for
Hi,
I'm trying to unlock a Cingular 2125 for use by a TMobile sim card. I'm not familiar but I take it the registry comments on this thread aren't to execute what I'm looking for.
This unit is also listed internally as an HTC Innovation.
Can you advise where on this forum I can locate an unlock application.
Greatly appreciated.
Thx
ashley_ings said:
I've had a number of problems trying to unlock my phone (not the sim) to be able to install certificates, to register unsiged dll's.
After a good look around I finally found this very simple solution:
Using a registry editor, like RegeditSTG, modifiy the following entries:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 2
Change the value data from 2 to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 16
Change the value data from 16 to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 128
Change the value data from 128 to 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies
Add new value "0000101b": Dword = 1
After this, close the reg edit application using task manager, and reboot you phone.
Click to expand...
Click to collapse
unlocking Cing 2125 for ?
tempest0z3 - have you tried this one on your phone?
http://forum.xda-developers.com/showthread.php?t=252802
tempest0z3 said:
Hi,
I'm trying to unlock a Cingular 2125 for use by a TMobile sim card. I'm not familiar but I take it the registry comments on this thread aren't to execute what I'm looking for.
This unit is also listed internally as an HTC Innovation.
Can you advise where on this forum I can locate an unlock application.
Greatly appreciated.
Thx
Click to expand...
Click to collapse
ashley_ings said:
tempest0z3 - have you tried this one on your phone?
http://forum.xda-developers.com/showthread.php?t=252802
Click to expand...
Click to collapse
this is an "application-unlock" utility. "application-unlocking" is different from "SIM/network-unlocking". so, you don't have to change your SIM to see if the "app-unlock" utility worked.
irfangk786 - Apologies, I thought this was for an application unlock, as opposed to an phone unlock, as this is an application unlock thread.
irfangk786 said:
this is an "application-unlock" utility. "application-unlocking" is different from "SIM/network-unlocking". so, you don't have to change your SIM to see if the "app-unlock" utility worked.
Click to expand...
Click to collapse
after few days of playing around, then found a solution to WRITE to Ext-ROM which persists after soft-reset.
All praise and thanks are to God the Most High.
Here is the solution; Tested for prophet ROM2.15.13.27 -G4 but should work for over chipsets and even other handsets e.g Wizard
To Unhide Ext-ROM --- (this is already known by most- but include for completeness)
Need following registry changes:
HKEY_LOCAL_MACHINE \System\StorageManager \AutoLoad\TRUEFFS_DOC1
"Bootphase"=dword:2
HKEY_LOCAL_MACHINE \System\StorageManager \Profiles\TRUEFFS_DOC1
"MountHidden"=dword:0
To Rename EXT-ROM
HKEY_LOCAL_MACHINE \System\StorageManager \Profiles\TRUEFFS_DOC1
"Folder"=string:Storage
--- can call it anything you like instead of "Storage"
To Unlock the EXT-ROM
HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS _DOC1
"SoftwareWriteProtect" =Dword:0
THIS key is the mainchange that will enable write protect, but it keeps reverting after softreset. To get around this, will need to change the following also.
HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS _DOC1
"AutoDPDMode"=Dword:0
Then Softreset.
Now should be able to write and install to Ext-ROM/Storage
If any problem can return the last key to original value
HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS _DOC1
"AutoDPDMode"=Dword:1
-----not sure what this key does??
then soft reset again.
this worked for me . try at own risk!!
Enjoy
All praise and thanks are to God the Most High
AbuYAHYA
Ps. let me know if it works or not for you...if anyone wants to make a Cab file then would be helpful
did any1 try this??
Works!!
Yes it works flawlessly....
Thanks
FeiYu
Not On The Wizard
That's a very old and known trick.
But: it does not work on the Wizard !
Prophet, etc. all OK
Cheers
hrb
Does that mean that i can install a dutch rom, by downgrading my G4 device.
Hopefully it does.
Cheers
Hello,
i installed the AKU 2.3 Rom "2006-10-14_Upgrade_Rom_lvsw_edition.exe" and don't habe these entrys in my registry:
AbuYahya said:
HKEY_LOCAL_MACHINE \System\StorageManager \Profiles\TRUEFFS_DOC1
"MountHidden"=dword:0
To Unlock the EXT-ROM
HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS _DOC1
"SoftwareWriteProtect" =Dword:0
Click to expand...
Click to collapse
AbuYahya said:
THIS key is the mainchange that will enable write protect, but it keeps reverting after softreset. To get around this, will need to change the following also.
HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS _DOC1
"AutoDPDMode"=Dword:0
Click to expand...
Click to collapse
this key is in my device at:
HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS1
"AutoDPDMode"=Dword:1
is it the same key?
thanks
John
John-Wu said:
Hello,
i installed the AKU 2.3 Rom "2006-10-14_Upgrade_Rom_lvsw_edition.exe" and don't habe these entrys in my registry:
Click to expand...
Click to collapse
I instaled the same ROM so abit strange you don't have writeprotect key. Possible options maybe perform backup and hard reset and then recheck for the latter key....Or....just make the keys.
I think I added this key also myself but not 100% sure.
HKEY_LOCAL_MACHINE \System\StorageManager \Profiles\TRUEFFS_DOC1
"MountHidden"=dword:0
As for writeprotect key then try adding. if the dword remain at 0 after soft reset then should work. if not try changing the Dword for AutoDPDMode form 1 to 0, aswell as the softwarewriteprotect key as below
To Unlock the EXT-ROM
HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS _DOC1
"SoftwareWriteProtect" =Dword:0
HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS _DOC1
"AutoDPDMode"=Dword:0
hopefully should work.
Abu Yahya
add to wiki
hrb said:
That's a very old and known trick.
But: it does not work on the Wizard !
Prophet, etc. all OK
Cheers
hrb
Click to expand...
Click to collapse
sorry to hear it doesn't work on Wizard.
If it was well known then maybe some-one should add it to the WIKI page. As several have asked how on a few threads with no replies both here and BUZZdev.net.
Abu yahya
doesnt work on my Jamin with the 16Mb_AKU2.3_GSM02.30.21_Extrom-4PDA.ru.exe rom
I had to use buzz's unlock tool to let me write to my extended rom.
I have upgraded to the PDAMobiz 16MB ROM. Unhiding the extrom via the registry entries work. But unlocking it doesn't.
I too do not have HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS _DOC1 key. So, I manually created it with the entries as posted, but it didn't work. (yes I did a soft reset after shutting down for 30s or so).
I then proceeded to go to HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS1 and change the "AutoDPDMode" to 0, and SoftwareWriteProtect to 0. There are 3 such keys: TrueFFS, TrueFFS1 & TrueFFS2. I changed all 3.
Unfortunately, it still didn't work...
But Buzz's unlocker prog worked. It didn't before when I was using the official Dopod ROM.
To every body !
I've update my rom to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe. when finished, the extended rom can't use. Change reg not work. So when i lock up at the rom "AKU2.3.1_LvsW_Edition_2006-11-28" i find there're 2 files : extunlock.exe and UnlockExtRom.cab. Run 2 files and finally i can use extended rom with no restrict.
My device is O2 Neo. Hope this usefull for some one
Would you please be so kind and upload these two files to the ftp? I'd like to try if it works with the last original QTEK-ROM.
Thank you
hi all.
've been reading some very interesting things in the forum the last few days.
i think you re great.
As far as:
Show extended ROM: [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ TRUEFFS_DOC1] "Bootphase"=dword:2
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ TRUEFFS_DOC1] "MountHidden"=dword:0
Hide extended ROM:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ TRUEFFS_DOC1] "Bootphase"=dword:1
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ TRUEFFS_DOC1] "MountHidden"=dword:1
they work ok for me with 2.9.7.24 wwe ROM
2.9.7.8009 extROM
(IPL&SPL 2.09.0001)
after soft reset i can see Extended_ROM2 on my file explorer.
when i check the file properties with resco file explorer all files inside extended_rom folder are read only(which can be changed of course).
so i can easily modify the cab files inside the extended rom along with config.txt entries.
last, changing all files to read only, reverting the registry keys to hide ext_rom
and hard reset.
crazyd said:
Would you please be so kind and upload these two files to the ftp? I'd like to try if it works with the last original QTEK-ROM.
Thank you
Click to expand...
Click to collapse
You can load "AKU2.3.1_LvsW_Edition_2006-11-28.exe", then right click to this file, select "extract to ..." to get these files hope this work on your !!
Great, it works again! Thank you for your help.
could you please to upload just two files ( extunlock.exe and UnlockExtRom.cab.) only, cause my connection is very slow for getting "complete packet rom".thx
Here you are!
Thaks bro, but still can't edit/delete my ext rom,
one more question, is this ROM can work with Simtolkit App?
Have tried the two files but I still can't install to ExtRom. It says ExtRom2 on my Dopod 818 Pro G3. Currently having more problems with syncing. Ay advise?
AbuYahya said:
HKEY_LOCAL_MACHINE \Drivers\Builtin\TRUEFFS _DOC1
"AutoDPDMode"=Dword:0
Click to expand...
Click to collapse
I found the following document about the Trueffs file system.
Download the following document http://www.mobilediskonchip.com/NR/....pdf|Installing_TrueFFS_for_Win_CE_Rev4.7.pdf
The AutoDPDMode parameter is described on page 12 as:
“AutoDPDMode”: This option enables Auto Deep Power-Down mode, which reduces the
average power consumption of DiskOnChip. Auto mode puts DiskOnChip in Deep Power-Down
mode automatically after each driver command, and takes DiskOnChip out of Deep
Power-Down mode automatically when the driver is called again. Using this mode disables the
option of booting from DiskOnChip via software reset, as the IPL cannot be accessed from Deep
Power-Down mode. In order to boot from a DiskOnChip device in Deep Power-Down mode, a
hardware reset or powering off is required. This registry entry has no effect on DiskOnChip
devices that do not support Deep Power-Down mode.
dword:1
Click to expand...
Click to collapse
Looks to me that AutoDPDMode has nothing to do with the write protection of the Extended ROM...
Regards,
--eluth.
I am trying to figure out what registry I have to change in order to make it so that cab files arent automatically deleted when you install them. I had to revert back to WM5 because I am getting tired of the performance issues with the custom WM6 roms and also all of the bugs and glitches... Every rom has it's own set of quirks. I find t-mobiles official wm5 rom to be most stable and fastest so I changed back to that.
Please help me with this little problem. Thanks in advance, Dan.
goto system>advance settings there should be an option not to auto delete install cab files.im running the same rom as you black diamond 2
Thanks but I recently changed back to the official T-mobile rom because I finally got tired of all of the bugs and glitched and performance issues with custom roms.
Thats why I am trying to figure out what registry to change.
dharvey4651 said:
Thanks but I recently changed back to the official T-mobile rom because I finally got tired of all of the bugs and glitched and performance issues with custom roms.
Thats why I am trying to figure out what registry to change.
Click to expand...
Click to collapse
Then why are you posting in the WM6 forum??? Posting here usually means you are asking about WM6.
All the answers are in the Wiki if you read / search...
Or grab a tool like Schaps advanced Config or similar and just tick the right box...
From the wiki:
Make WM5 keep CAB files around after installing (1)
If you wish to keep the original .CAB file around after installing the application, set:
HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 0 (DWORD decimal)
Or to restore to the default:
HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 2 (DWORD decimal)
Make WM5 keep CAB files around after installing (2)
An alternative method of making WM5 keep the original .CAB file around after installing the application is by adding the "/nodelete" option to the Windows CE loader:
HKCR\cabfile\Shell\open\command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
Having been trying to flash for couple weeks now and I can't get past the application unlock step. I need help please Wm5 is too outdated. I have a very virginy Sp5 nothing ever done to it and I just got it. I was reading some ancient forums dated 2006-05 and saw that i-mate released a ROM update and that was 2.5 333 ....something can remember but even that was newer than the rom currently loaded into this phone,so u have an idea of clean this phone is. Perhaps this is the problem. I am using Karhoe's guide and I am not sure if it works for such a virgin phone as mine, i keep getting this error(attached) plz help. Thanks in advance.
I had the same problem, and all I had to do was do a hard reset (clear storage) on my phone and restore it to factory settings (of course backup all the data you want to keep first). It seems as if I junked up my phone with things.
I've had same prob , solved using this unlocker
Not sure how to do a hard reset but I'll fiddle around somemore but Thanks alot stesa and the craze.
Hard reset is the same thing as "Clear Storage" found in the menu items. Factory default..
if u fail to unlock application using unlock application try try this:
Download regeditSTG2 fro: http://4pda.ru/forum/attach/387522/regeditSTG2.zip
Then install it and change some registry values:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 2
-> change to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 16
-> change to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 128
-> change to 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies
-> create new key "0000101a": Dword = 1
HKEY_LOCAL_MACHINE \Security\Policies\Policies
-> create new key "0000101b": Dword = 1"
after this reset phone then supercid using lockwiz
My phone has bugged out and will not let me unlock it through the default pin unlock. I know the pin is correct, and it seems to be a pretty common problem with 6.5?
Now I know hard reset is the quickest way out of this mess, but I need to get to the texts I have received since i last backed up (3 days or so)
Can someone help me with the construction of an exe to change a registry key on boot, in particular
HKLM\Security\Policies\Policies\00001023: 1
I feel if I can get this key modified on boot I will be able to access my phone again.
Planning on shuffling it over to the phone into the startup folder.
Any thoughts?
snooparoop said:
My phone has bugged out and will not let me unlock it through the default pin unlock. I know the pin is correct, and it seems to be a pretty common problem with 6.5?
Now I know hard reset is the quickest way out of this mess, but I need to get to the texts I have received since i last backed up (3 days or so)
Can someone help me with the construction of an exe to change a registry key on boot, in particular
HKLM\Security\Policies\Policies\00001023: 1
I feel if I can get this key modified on boot I will be able to access my phone again.
Planning on shuffling it over to the phone into the startup folder.
Any thoughts?
Click to expand...
Click to collapse
I can make the exe for you but how do you plan to put it in the startup folder exactly?
Using a linux box, can see the phone as a drive despite the locked status.
Cheers
snooparoop said:
Using a linux box, can see the phone as a drive despite the locked status.
Cheers
Click to expand...
Click to collapse
haha, sounds like a good trick. the other thing: do you have a custom rom installed? stock rom may have cert checking in place before full boot up finished so the exe has to be signed with a cert that's already on the phone (default OEM or custom installed cert).
Stock Telecom NZ rom is installed
snooparoop said:
Stock Telecom NZ rom is installed
Click to expand...
Click to collapse
we will also have to deploy custom cert then.. we can try anyway, I'm curious to see if it can be done =) PM me.
Anybody else need the C++ code to do this? It follows.
Code:
//
// Regkey.cpp : Defines the entry point for the application.
//
#include "stdafx.h"
#include "Winreg.h"
int WINAPI WinMain(HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPTSTR lpCmdLine,
int nCmdShow)
{
DWORD Value=1;
HKEY RegKey;
if(RegOpenKeyEx(HKEY_LOCAL_MACHINE,TEXT("\\Security\\Policies\\Policies"),0,0,&RegKey)==ERROR_SUCCESS)
{
RegSetValueEx(RegKey,TEXT("00001023"),NULL,REG_DWORD, (unsigned char *) &Value ,sizeof Value);
RegCloseKey(RegKey);
}
return 0;
}
Originally from post #4 in here:
http://forum.xda-developers.com/showthread.php?t=648103
If activesync is operational, you should be able to use MS security policy manager, see
http://www.howardforums.com/showthread.php/1238095-Un-set-Exchange-enforced-PIN-length-amp-etc