Hi
I'm brand new here, and I'm hoping this question may have already been asked and answered but...
I have the new Orbit 2 and really much prefer the HTC Home to the o2 Today.
So I installed HTC Home and it works fine but...
I'm not able to control it in the same as this guy can with the TouchFlo...
http://www.youtube.com/watch?v=L5olemDlIRI
I'd like to be able to control it in the EXACT same way; I have UltimateLaunch but it doesn't seem to change the whole screen in the way the video does, just the bit at the bottom.
Am I missing some software?
Many, many thanks
Oliver,.
just bumping my question...
I would be very interested in this too as a new owner of an orbit2
Alfie, can you give me any pointers to the HTC Home app please?
The answer to this thread is actually extremely simple. Remove ALL today plugins except for ultimate launcher then add your HTC plugin onto a tab in UL, then create more tabs with icons and such, set the tab gestures to open/perform the desired tasks and lastly set the height of the ultimate launch plugin to be equal to your entire screen size. After you play around for a bit you will understand. Ultimate launch does not use touchflo, it has its own "touchflo" monitor. I have been using a setup like this for a few days now and am quite happy with it. if you search here in the developer section you will see some threads there for "the better cube", "questions about tabbed today" and others. read those and you will be quite happy.
My O2 Orbit2 did not come with HTC Home, any clues as to where I can get this please?
I have been trying unsuccessfully to change my 3D dialer skin to something more attractive.
Has anybody actually managed to change a skin by installing a CAB and have it work?
I much prefer the look of the standard windows dialler. The button layout is much more attractive than a solid block of grey and the 3G dialler.
I have tried every way I can think of but am still stumped.
Is it just a TYTN II problem?
This is a General Question & belongs in the General Kaiser forum. Please excersize proper forum etiqute & place posts/questions where they are relevant or within an existing dialpad skin thread. Thank you.
Yes it works. You may already have the default dialer in your device BTW. DL KaiserTweak & see if you can use the change dialer tweak to toggle between the MS & HTC dialpads. Or use your search function to find one of the dialer threads such as the onw started by Nadavi.
Done that
GSLEON3 said:
This is a General Question & belongs in the General Kaiser forum. Please excersize proper forum etiqute & place posts/questions where they are relevant or within an existing dialpad skin thread. Thank you.
Yes it works. You may already have the default dialer in your device BTW. DL KaiserTweak & see if you can use the change dialer tweak to toggle between the MS & HTC dialpads. Or use your search function to find one of the dialer threads such as the onw started by Nadavi.
Click to expand...
Click to collapse
I had already done all of that and tried switching to the windows dialer before installing the Nadavi dialer etc. with no avail. It may be a Tytn II specific problem.
Too many theads relating directly to the fuze! Here is one big thead. Please post in here That way, we don't flood the whole Raphael forums with fuze this and fuze that. I'll edit the first post as we go. Or a mod can also.
Kraize
Q: My Fuze keyboard is all messed up after I flashed a different rom!
A: Download this cab file and install. Then soft reset.
Click to expand...
Click to collapse
Q: How can I get rid of all that bloatware on the AT&T rom?
aruppenthal said:
1.Wait for the tap here to customize.
2.Go through the screen alignment
3 skip or set pass word.
4.When it says your done and tap the screen to start WM get ready to reset
5. The absolute second you touch the screen hit the stylus reset.
6. When your device starts TF3d will NOT be in your today Items
7.Go to today settins and disable everything
8.Use file explorer to go to windows and find PT_Manila_Reg .cab and run it
9.Run MSFT_Security.cab
NOTE: The programs will not be organized in folder if you do this. Just a big Programs Folder
Click to expand...
Click to collapse
Q: TF3D is very slow and laggy. Sometimes it doesn't respond at all.
Install: Advanced Configuration Tool v3.3 and enable various tweaks and also install Diamond TF3D Config 0.6.7 and enable the various tweaks to make TF3D faster. If this doesn't work, flash a custom rom and see if that makes a difference.
Click to expand...
Click to collapse
Q: The original TF3D theme is ugly! How can I change it without flashing the rom?
Noob question. Go here and search. You'll find your answer. I can't do everything for you.
Click to expand...
Click to collapse
I got one... my scrolling through the different tabs seems to work at time and other times does not scroll at all is this laggy or am i using the tf3d wrong?
rymonday said:
I got one... my scrolling through the different tabs seems to work at time and other times does not scroll at all is this laggy or am i using the tf3d wrong?
Click to expand...
Click to collapse
Added to 1st post.
Thanks for the links -- hope those programs help!
got another one.....
I get a popup keyboard alot... I installed the null keyboard and it helps but find the bottom bar popping up very annoying.
How do i get rid of that?
i tried a theme called vista ultimate which i liked alot but when i slide the keyboard out it doesnt go to the launcher screen it turns tf3d on its side but of course it doesnt work that way
how do we know which themes will actually work with our pro?
or how do i make the launcher come up with that theme
Good idea:
My Fuze is always connected via EDGE, even though I live in a 3G serviced area (San Francisco Bay Area). I'm assuming the phone is choosing the stronger of the two signals by default, which is fine for voice, but EDGE is excruciatingly slow for streaming video. Is there a way to force the phone to use the 3G connection?
Reply With Quote
dokomo said:
Good idea:
My Fuze is always connected via EDGE, even though I live in a 3G serviced area (San Francisco Bay Area). I'm assuming the phone is choosing the stronger of the two signals by default, which is fine for voice, but EDGE is excruciatingly slow for streaming video. Is there a way to force the phone to use the 3G connection?
Reply With Quote
Click to expand...
Click to collapse
I have just answered this for you in the post you started.
lbhocky19 said:
i tried a theme called vista ultimate which i liked alot but when i slide the keyboard out it doesnt go to the launcher screen it turns tf3d on its side but of course it doesnt work that way
how do we know which themes will actually work with our pro?
or how do i make the launcher come up with that theme
Click to expand...
Click to collapse
A lot of the diamond themes wont work on the Fuze in landscape mode. I think that Vista Ultimate is one of Nisse's themes so maybe send him a message and see if he has a version for the Fuze.
Kraize
Make note in the skip the bloat that they must also install the HTC_PPC_opera_9 cab from windows if they want the internet tab of tf3d to work.
Q: The original TF3D theme is ugly! How can I change it without flashing the rom?
As Kraize said most you can find in the thread he linked. However, so far none of the background changing mods have worked foe me. It completely breaks TF3d. I think it will take a few days to figure out this versions backgrounds.
MODS please sticky this. Its already getting insane with Fuze posts.
Has anybody tried to see if they can get the phone unlocked to be used outside of the united states, or to be used on another carrier?
Q: How to enable and keep HSDPA? Or am I the only one with this issue?
starstreak said:
Has anybody tried to see if they can get the phone unlocked to be used outside of the united states, or to be used on another carrier?
Click to expand...
Click to collapse
Olipro will unlock it for a small fee. See the sticky in the raphael rom development forum.
aruppenthal said:
Q: The original TF3D theme is ugly! How can I change it without flashing the rom?
As Kraize said most you can find in the thread he linked. However, so far none of the background changing mods have worked foe me. It completely breaks TF3d. I think it will take a few days to figure out this versions backgrounds.
MODS please sticky this. Its already getting insane with Fuze posts.
Click to expand...
Click to collapse
I downloaded the TF3D config tool on the diamond thread and the HTC Black Theme posted elsewhere and it worked for me. One thing i did notice is that the splash screen with the AT&T logo didn't appear. Looks much better than the AT&T theme...
FUZE and VIsta WMDC need help
Just got my fuze last night. Tried installing the software on my laptop - for some reason the WMDC does not recognize the device. Evey time I hook up the fuze the laptop tried to install a driver. NOw my 8525 doesn't work with the laptop too! Any help sorting this all out would be greatly appreciated. I mainly need to get my contacts from the 8525 (running WM5) to the Fuze.
Thanks
Kriaze, Thank you so much for starting this thread. This is going to be so helpfull to all us new Fuze owners. This is why XDA is the GREATEST for us HTC users.
So many thanks to EVERYONE...
Beachboyde/Jon
I joined this site just for the release of the Fuze/Touch Pro although I'm waiting for Black Friday to purchase. I have 2 questions for those that already have it:
Does the Fuze come with the USB-headphones like the Touch Pro?
If not, would the one from Sprint work?
hg23 said:
I joined this site just for the release of the Fuze/Touch Pro although I'm waiting for Black Friday to purchase. I have 2 questions for those that already have it:
Does the Fuze come with the USB-headphones like the Touch Pro?
If not, would the one from Sprint work?
Click to expand...
Click to collapse
It does not come with the headphones but does come with an adapter to allow you to use 2.5 and 3.5mm headphones of your choice. It also allows the fm radio to work just fine.
Edit: and yes the sprint headphone will work. They are just the generic htc usb headphones/headset.
Sashimi?
Forgive me as it has been a long time since i have been a part of these forums. When i was using my tilt around the time 6.1 official came out i had sashimi set up perfect for post flashes. I just got my sashimi folder back to where i wanted it to install on the FUZE yet it is erroring out due to screen resolution sizes. Does anyone know if a new version was released to support the vga devices or did this die with the author being banned.... Thanks for the help!
So it seems that some of the clocks in the diamond themes result in nothing but zeroes (0000) on the Fuze and TP from what I have read. Unless I missed a post, there has not been a solution posted as of yet.
If you have a clock that is working on your device after TF3D customization, especially a flip clock, please post a link in this thread.
Looks like there are subtle differences in TF3D themes between Diamond/Raphael.
Mods please delete if this thread is not necessary.
Tnx!
Has anyone been able to find a flip clock for the Fuze yet? I know there is one out for the Sprint touch pro.
check this post:
http://forum.xda-developers.com/showpost.php?p=2907538&postcount=193
Install the theme it directs you to and the flip clock comes to life.
Yea, I did install that one and it looks great. The only problem is, the 3dconfig slows down touch flo 3d on the Fuze pretty bad. Looking for an alternative by using the manila customizer. Thanks for the reply.
Hmmm.... I'm not noticing my Fuze being any slower than it was stock from AT&T to be honest....
My only problem with that theme is all the text under my start menu is too dark to read now. Need to remember how to fix that
I know many people have seen a difference. After awhile, it seemed ok until I un-installed it back to the stock theme. Then I saw the difference. Ohwell, I just thought there was a cab floating around that only gave the flip clock. Thanks again.
Greetings,
I've started changing the interface of my HTC Touch Cruise (Polaris) a few days ago using UltimateLaunch.
Now I'm scouting the forums to find new tips/tricks & answers to my upcomming questions but I'm not really a Technology dude so I'm kinda stuck..
What I would like to know is what application do you guys use to get buttons on the HTC home tab to turn on/off your bluetooth/wireless and even reset/turn off the device and what to use to change the icons..
Second, The s2u2.exe I use (iPhone lock) is somehow way to big for my screen, buttons are pushed over eachother and everything just looks....ugly, Is this a bug or am I just stupid?
Third...How can I show (current) weather and digital time in 1 tab at the same time?
Many thanks for those who bothered reading & answering these questions.
2. Most probably you have installed wrong version of S2U2.
For Polaris you MUST use QVGA version.
The QVGA version worked Perfectly, Thanks!
Anyone got any answers for the above questions?