Database Info

Accessing Wifi settings via Launcher

Hi, I'm looking for a way to access the WIFI settings directly from Ultimate Launcher. Is there a file somewhere that opens them?
I mean the settings where I can configure a Wireless network to be Work or Internet.
Thanks a lot...

Anybody? It must be possible in one way or another....

What does the restore proxy cab and hiddenproxy cabs do?

I had to hard reset my Fuze and got rid of the bloatware. There are some cabs that I restored but what does the proxy and hiddenproxy cabs do in windows folder?
When in weather tab, sometimes it says that I dont have data connection. Im hoping that I need to install one of these...

The 'hidden proxy' is a proxy that your phone uses to get onto the web. So if it is enabled your phone is routed over AT&T's network. You cannot use medianet without it. However, it slows down other apps and causes major problems with some apps like Internet Explorer and the weather app. I disable the proxy at all times since I don't use any of the AT&T medianet type apps. You should try to disable it...you can always re-enable it.

bugsykoosh said:
The 'hidden proxy' is a proxy that your phone uses to get onto the web. So if it is enabled your phone is routed over AT&T's network. You cannot use medianet without it. However, it slows down other apps and causes major problems with some apps like Internet Explorer and the weather app. I disable the proxy at all times since I don't use any of the AT&T medianet type apps. You should try to disable it...you can always re-enable it.
Click to expand...
Click to collapse
Thank you. So if I hard reset my Fuze without the bloatware, do I have the hidden proxy enabled?
Also how do i disable it? What cabs should i activate in the windows folder?

Don't know what it will default to but the cab itself should be located in your Windows Directory and is called removehiddenproxy and another is called restoreproxy.

Thanks, bugsykoosh

[help] internet trouble.

This phone is bugging me. ill be home, where I have low/no service, ill try to connect to wifi, but the phone will try to connect to gprs/3g. then sometimes ill have service and it wont connect at all. IE will work but not opera or some other programs. WIFI is searching 24/7 telling when theres a connection. anyone else have this problem?
I want to leave wifi on but only connect to networks registered.
I want if there's no 3g connect to wifi if available.
seems simple to me. possible? maybe i need to change some settings?

There is "no data" but that don't really solve the problem.
I have expereinced the same, especialy if I have low signal then the gprs/3g connections starts up.
It would be neat with an application that gave you a pop up where you had to confirm that you want to connect thru anything other than wifi or bluetooth.

I have the nodata program on my phone and it works great. Search the forum for the program and if you cant find it tell me and I'll attach the .cab

jaszek said:
I have the nodata program on my phone and it works great. Search the forum for the program and if you cant find it tell me and I'll attach the .cab
Click to expand...
Click to collapse
whats the program do

http://letmegooglethatforyou.com/?q=nodata+pocketpc

aonavy said:
whats the program do
Click to expand...
Click to collapse
NoData is probably not what you're looking for. It will allow you to disable traffic through a selected data connection. But it must be enabled / disabled manually. Sounds like you're looking for something that will toggle automatically, giving priority / preference to your WiFi connection when it's available.
There's a program called CommMgrPro that will do what you're looking for. That is, enable and disable connections based on things like cell tower location, detection of WiFi, etc. There's also a forum page for the program here.
A program called Bandswitch (at the same site as CommMgr Pro) will do similar to NoData, except it will let you choose enable / disable based on Time of day presets.
Also here in the forum you can find a program called WifiLocations. It will do similar to the first program above above. If you search the forum there are a few more (some free) programs that will do what you're looking for. Good luck!

My problem with the nodata program is that I can't seem to disable gprs/3g traffic while using wifi. It might be that I have an old version, but I have found many times that even with nodata running in the background with disabled data traffic, it still connects me if I loose my wifi connection.

hotmail said:
NoData is probably not what you're looking for. It will allow you to disable traffic through a selected data connection. But it must be enabled / disabled manually. Sounds like you're looking for something that will toggle automatically, giving priority / preference to your WiFi connection when it's available.
There's a program called CommMgrPro that will do what you're looking for. That is, enable and disable connections based on things like cell tower location, detection of WiFi, etc. There's also a forum page for the program here.
A program called Bandswitch (at the same site as CommMgr Pro) will do similar to NoData, except it will let you choose enable / disable based on Time of day presets.
Also here in the forum you can find a program called WifiLocations. It will do similar to the first program above above. If you search the forum there are a few more (some free) programs that will do what you're looking for. Good luck!
Click to expand...
Click to collapse
thank you very much for the info. I think I sorta fixed it pretty well on my own.Still need the toggle off and on though.
I hard resetted it with out the bloat. then configured my interenet like this:
http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=110811
then i went to sounds/notifications in settings, i think, and disabled the wifi notification.
seems to work pretty well.

i take back what i said.it goes in and out. I had 3g service and it said I was connected to media net, but it wouldnt let me get to the net. this phone is a pain when it comes to internet and gps

what do you guys have for internet settings under start>settings>connections>connections>advanced>select network
what setup do i use in the first in the first box and the which setup in the second.
mine 1st media net
2nd my work network (whatever that is)

aonavy said:
i take back what i said.it goes in and out. I had 3g service and it said I was connected to media net, but it wouldnt let me get to the net. this phone is a pain when it comes to internet and gps
Click to expand...
Click to collapse
Edit your MEdiaNet connection settings so your proxy is DISABLED. If it is enabled your WiFi will try to use it too - which is not possible. Unchecking the proxy will have have no discernible impact to your browsing speed when you are using the AT&T data connection.
aonavy said:
what do you guys have for internet settings under start>settings>connections>connections>advanced>select network
what setup do i use in the first in the first box and the which setup in the second.
mine 1st media net
2nd my work network (whatever that is)
Click to expand...
Click to collapse
You can safely set both to MEdiaNet. If you have WiFi enabled and you're connected to your access point it will take precedent over your GPRS (Edge) or UMTS (3G) connection. It is not necessary to disable the AT&T data connection if you are connected and browsing over your WiFi connection. As soon as you turn off or lose your WiFi signal, your phone will go back to using the AT&T data connection.

hotmail said:
Edit your MEdiaNet connection settings so your proxy is DISABLED. If it is enabled your WiFi will try to use it too - which is not possible. Unchecking the proxy will have have no discernible impact to your browsing speed when you are using the AT&T data connection.
You can safely set both to MEdiaNet. If you have WiFi enabled and you're connected to your access point it will take precedent over your GPRS (Edge) or UMTS (3G) connection. It is not necessary to disable the AT&T data connection if you are connected and browsing over your WiFi connection. As soon as you turn off or lose your WiFi signal, your phone will go back to using the AT&T data connection.
Click to expand...
Click to collapse
okay..thanks for the post.
set media net for both and disable proxy and I should be okay correct?
2 questions:
how do I disable the the proxy? delete wap.cingular from the settings? click disable proxy icon?
also i heard if you have one of these disable you cant use your mms?

up up up and away...

[Q] How to force the phone to never use anything but wifi?

I sometimes uses the wifi connection to surf the web on my touch pro, problem is that the wifi reciver don't look to be very strong so sometimes I loose the connection, especially if I'm moving around.
I have found the program nodata, but it doesn't seem to work that well. Even if I activate nodata and have it running in the background while surfing the phone still connects to gprs/3g connection if the signal is lost. My guess is that if I click a link after I loose the wifi connection the phone seem to override the funtion of nodata. Is there any other software that I can use instead?
I want the phone to wait until a wifi connection is established again instead of changing to a 3g/gprs connection.

I'm not sure. Once I removed all the data connection settings, but then I couldn't use the data ever. I've been keeping an eye for a program that does this, but it seems that everyone under the sun other than me has a data plan.

hahaha yo are noy allone out there, I would alslo like to know how to disable data conection.

the answer - modaco nodata. Its not the neatest but the only one
EDIT: and also you can do this in Advanced Configuration Tool from "connections" menu item. If you want a more permament solution (because of the long way to the choise in the app)
All the apps I mention are really easy to google for

darfri said:
the answer - modaco nodata. Its not the neatest but the only one
Click to expand...
Click to collapse
yes...nodata is the one you want.....just search and you shall find

Not sure if this helps but when I handed down my Hermes to my Father in Law just so he could use it for phone calls and TomTom (via BT GPS). I had AT&T block all data so he can only use wifi.
It works great! when his wifi is turned off and he tried to go to the web it says connection refused.

Thanks for the input guys, but nodata don't seem to help me. It's the software I use now, but it seems that somethign is able to override the nodata software leading the phone to dial up when the wifi connection gets a low signal.
I'll give the Advanced Configuration Tool a go, but it seems to be a lot of work going in there turning things off, just to go back and activate them again if I want to check my mail "in the field".

I have an at&t Fuze with no data plan, just unlimited text/mms. I cannot disable data by using Modaco's NoData because mms requires Media Net.
What I have done so that all apps use WiFi is the follows:
Under Start / Settings, select the Connections tab.
Launch Connections.
Select Advanced tab.
Click on Select Networks.
Under Network Management, change "Programs that automatically connect to the Internet should connect using:" to "My Work Network".
With this setting, I don't have Internet connection unless WiFi is active, which is what I want. Maybe the Touch Pro has something similar.

Thanks icwinner, that seem to have made the trick.

[Q] Internet Explorer is not working in gprs but working in Wifi

I am using HTC Fuze P4600 AT&T in Bangalore, India. Internet explorer is not working in Aircel Gprs settings provided by Aircel Network and also whatever programs(YOutube, Opera(Preinstalled) using internet explorer to download/browse also not working. But It is working in WiFi connections and also what ever programs using Internet explorer.
Anybody will you be provide me a Internet explorer registry reseting or settings to browse in internet explorer.
I have already tried settings as per google search i.e.
Access point: aircelgprs.po
Access point : aircelgprs.pr
I have installed Opera Mobile 10 in my phone and using the opera to browse internet now.
Kindly help me to browse Internet Explorer and also other programs using Internet explorer.

I had problems like that for a while, and it was due to a hidden proxy being installed by cab. Check to see if there are cab files in \windows called Hidden Proxy.cab and maybe Remove Hidden Proxy.cab. You want to remove it.
I don't know jack about connections settings, so don't bother asking me for follow-ups, lol. Just try to get rid of the proxy. Maybe you can delete it in the connections settings.

Thanks for the reply.
I have tried to delete the same. But it is not possible since the file is in ROM. I tried to disable proxy thru Proxy manger. It worked. Now I am able to Browse thru IE in GPRs settings thanks a lot for the XDA Members.