Related
Since I upgraded to the new 1.11 rom I have noticed that the unit will not disconnect from calls instantly. A soft reset usually solves the problem. However this morning, after about a week of usage on the new rom the unit started running very slow. When I tried to power off it would not. In fact everytime I hit the power off button now the unit locks up. I soft reset and can use the phone and programs (they are running very slow) but when I hit the power button it locks up again just sitting on the today screen. No buttons work on the touch screen or the hardware buttons.
Has anyone else experienced this?
I have performed a hard reset and even reinstalled the rom upgrade again and have had no sucess. Since I reinstalled the ROM I have lost the "phone dialer" and KSE Trufax.
Someone PLEASE help.
I have also some problems with my upgrade. The phone does not disconnect after hanging up, and sometimes the phone does not recognize the caller from the address book. I mean common, my old fw was better
Sometimes the camera freezes also.
P.S.
May be you are using a backup solution to restore the data to your ppc after upgrade? I have experienced slow downs in that manner.
QTEK S100 - Power off lockup
Hi all,
I too have a similar problem. Whenever I power-off the device (using power-button on right side) , it hangs! Only a soft-reset seems to work.
MODEL : QTEK S100
ROM : 1.11.00 WWE
Date : 03/14/05
Radio : 1.11.00
Protocol : 1337.42
ExtRom : 1.11.133 WWE
Is this a ROM problem. I have only had to the unit for 3 days and this has been a constant problem from day one.
Any help would be appreciated.
Thanks... Peter
I've bought 2nd HTC Tornado (Vodafone), I cannot turn on wifi, when select WLAN setting-Connection Status it's notice that : "Driver is not loaded"
Anyone please help me, thanks!
Some Tornado does not come with WiFi module
karhoe said:
Some Tornado does not come with WiFi module
Click to expand...
Click to collapse
thanks how can we check this status???
I had a similar problem on Typhoon with bluetooth once. Same message appeared every time I tried to enable bluetooth. Hard reset and even reflash didn't helped at all. I thought bluetooth module died so I bought Tornado. After some time I tried to flash this phone to WM6 and suddenly bluetooth worked again. But don't ask me why
Kylexd said:
I had a similar problem on Typhoon with bluetooth once. Same message appeared every time I tried to enable bluetooth. Hard reset and even reflash didn't helped at all. I thought bluetooth module died so I bought Tornado. After some time I tried to flash this phone to WM6 and suddenly bluetooth worked again. But don't ask me why
Click to expand...
Click to collapse
i've tried more than 3 times up to WM6 but still the same!!!
From what I've seen, tornado's with Wi-Fi have that big hump on the top, like mine, not sure if you can tell from picture on my profile. Perhaps, could you tell us some more about what it does when you try to turn Wi-Fi on? Maybe that'll light up some thoughts.
markanthonypr said:
From what I've seen, tornado's with Wi-Fi have that big hump on the top, like mine, not sure if you can tell from picture on my profile. Perhaps, could you tell us some more about what it does when you try to turn Wi-Fi on? Maybe that'll light up some thoughts.
Click to expand...
Click to collapse
when I try to turn Wifi on, nothing happen in Communication Manager it's still disable ( green light didn't show!!!)
In Wifi Setting it indicate that "driver is not loaded"
Vodafone v1240 is wi-fi equipped and does not have the "hump" at the top. Ask me how I know. If your Vodafone is not a v1240, then it's not a Tornado.
However, I've never had a problem with getting it to work. I never tried it with WM5, as I had the phone all of twenty minutes before I flashed to WM6.
djsleepwalker said:
Vodafone v1240 is wi-fi equipped and does not have the "hump" at the top. Ask me how I know. If your Vodafone is not a v1240, then it's not a Tornado.
However, I've never had a problem with getting it to work. I never tried it with WM5, as I had the phone all of twenty minutes before I flashed to WM6.
Click to expand...
Click to collapse
Fulfilling your request; ¿How do you know? LOL I didn't see your sig!
So P4bus, have you considered upgrading your ROM? Have you tried HARD RESET? That should reload all drivers and settings. Though you will loose any info/programs/data/changes that have been done to the phone since. Or perhaps, upgrade to WM6 or WM6.1 ? I strongly recommend Nitrogen's WM6, of if you want to go up to WM6.1 you can try GnatGoSpat's. He just anounced he's working on further changes and bug fixes, and will be re-cooking and posting new ROM about mid this week.
Regards.
markanthonypr said:
Fulfilling your request; ¿How do you know? LOL I didn't see your sig!
So P4bus, have you considered upgrading your ROM? Have you tried HARD RESET? That should reload all drivers and settings. Though you will loose any info/programs/data/changes that have been done to the phone since. Or perhaps, upgrade to WM6 or WM6.1 ? I strongly recommend Nitrogen's WM6, of if you want to go up to WM6.1 you can try GnatGoSpat's. He just anounced he's working on further changes and bug fixes, and will be re-cooking and posting new ROM about mid this week.
Regards.
Click to expand...
Click to collapse
"Press and hold down the 2 external buttons down the screen (start and contacts buttons), and then press for a 1.5 seconds (important) the power button. Release them. If you have done all ok, you must see a screen telling you to press "0" to reset your phone to factory. If it starts normally repeat the process."
this is hard reset Tornado???
p4bus800 said:
"Press and hold down the 2 external buttons down the screen (start and contacts buttons don't release till u see the black screen), and then press for a .5 seconds (important) the power button. If you have done all ok, you must see a screen telling you to press "0" to reset your phone to factory. If it starts normally repeat the process."
this is hard reset Tornado???
Click to expand...
Click to collapse
See corrections in RED. Hard Reset = "Clear Storage" START--> ACCESSORIES---> CLEAR STORAGE: Type confirmation word shown on screen, and press YES. Phone will boot to factory defaults.
I've read specs on the 2125 andit says there is no wifi, sorry. http://www.smartphonehistory.com/specs.php?UID=24http://www.engadget.com/2005/12/04/cingular-2125-htc-faraday-p-reviewed/
After Hard Reset or Clear Storage, it's still the same cannot use wifi!!!
p4bus800 said:
After Hard Reset or Clear Storage, it's still the same cannot use wifi!!!
Click to expand...
Click to collapse
Would you care to please specify what is your phone TradeName and Model? e.g. T-Mobile SDAII.
I've a SDA US and I've the same problem, I tried with Hard reset and nothing, it still not working.
Best regards
Rom WM6.5 1.11.456.21 WWE Pharos v24
CE OS 2.5.707.1 Core 23003
Cr. : Phamquang
http://www.pdaviet.net
Download Link:
http://rs153.rapidshare.com/files/295530585/PHAROS_WM65_2_5_707_24_B23071COM3_20OCT2009.rar
Password : PhamQuang
Cheers
looks really nice!
Tihiti rom have little bug, when u send sms,rom send lots same sms. Can you fix that?
I fix problem,hard reset and now rom work fine. Problem is sms threader.
Problem:
I charged my phone all yesterday evening (probably around 5-6 hours). So the battery was 100%.
5 minutes later I cheched my phone: 31% battery
1 minute later: 9% battery
It stayed on 9% a while, and descended from 9 in the normal way. Ran out of battery this morning, and the phone shut down.
Before I put the phone in the charger yesterday evening , it was at 9%. So it seems that it thinks that it charged, but no current was add to the battery. So when i pull it out from the charger, it thinks that the battery is 100%, but is only in fact 9%.
Maybe my battery is failing. Never had this problem before.
The phone is ON now, and in the charger. Will update post.
Charging by USB from computer.
EDIT1: about the ROM: Really nice! Like it very much! Fast and somewhat stable
EDIT2:
Phone was charged 91% a couple of hours ago, disconnected the phone. Its still on 91%, so I think the problem is gone... Probably a user error the first time
EDIT3: After charging the phone to 91% (as mentioned before), it stayed on 91% for an abnormal long time. I rebooted the phone, and after the reboot, I had 96% battery...
TouchFLO 3D issue!
I tried to install TouchFLO 3D [ HTC_Manila.cab ] and selected it in Today.
But after reset it flashed on the screen as "Tap here to start TouchFLO 3D ..."
But after taping it hangs the phone sometimes or the application does not respond and must be reset.
Does the Pharos not support TouchFLO 3D or have i tried wrong TouchFLO 3D version.
Is it the Dimond which has got the power to use this app? Does the pharos capable of running TouchFLO 3D?
Coincidently even i faced the Battery issue as mentioned above after recharging to 100% and after disconnecting the battery came down to 87%
Will this work on the Pharos Traveler 127? I've noticed in looking for ROM updates, specifically WM6.5, I keep finding references to Pharos in general but no specific model numbers as I understand them.
Thanks for this! I have been using this for 2 days now and haven't got any problem at all so far. It's also pretty fast. Boots up fast and was faster than my old rom which was Poldo v12.
I'm running this ROM now.. i like it No problems so far! Only thing is, that my hotmail settings fail, i think it's a hotmail problem..
I'll report problems in a few days!
juustjuust said:
I'm running this ROM now.. i like it No problems so far! Only thing is, that my hotmail settings fail, i think it's a hotmail problem..
I'll report problems in a few days!
Click to expand...
Click to collapse
Use the cab below for surve your problem.
Cheers
OK, i'll try!
Pharos 117
Hello everybody!
I am novice in pharos device
Anyone knows if this rom is compatible with Pharos 117?
Thx
Erick
The windows live update works fine! I installed the dutch version without messenger, so this one's a lot better
Thanx for the work!
This rom works great for me so far, and surely the best one yet. The memory usage seems slightly lower than any of the 6.1 roms I've tried, and I really like the newer windows menu which is superb when you get used to it.
Only real negative issue is that the bootup from cold is very slow, but because like most users I assume I rarely turn it off it's not a major problem.
I can't see myself going back to a 6.1 rom now, 6.5 is so much nicer...
USB to PC
everything works fine with me also...except for the USB to PC whenever you set it pop up screen will come with this message...:This feature needs a memory card in your device. Please insert first before using this feature."
thank. I'll try tonight.
erickwill said:
Hello everybody!
I am novice in pharos device
Anyone knows if this rom is compatible with Pharos 117?
Thx
Erick
Click to expand...
Click to collapse
I'm not sure your Pharos 117. I know P3470 is Pharos from HTC.
Cheers
hi...
i need help..
Problem..... After i Up rom and restart. Rom it show
" MortScript V 4.3b5
.mscr and .mortrun Extensions Rejistered Please Run any .mscr/ .mortrun File or read the manual." what is mean?? what shall i do. pls help me.
zhoung said:
hi...
i need help..
Problem..... After i Up rom and restart. Rom it show
" MortScript V 4.3b5
.mscr and .mortrun Extensions Rejistered Please Run any .mscr/ .mortrun File or read the manual." what is mean?? what shall i do. pls help me.
Click to expand...
Click to collapse
o.k. i have answer From web pdamobiz. I delete MortScript in Window/startup
and restart. end. rom not show msg again.
I'm going back to 6.1. The battery drains.. i need recharge every day, while my battery isn't weak.
I randomly don't get notifications when i get new mails, so i don't really trust my phone anymore!
For the rest.. the rom runned smooth, but my mail is very important for me
Me too. I have problem same you.
Hi,
I have recently started getting WiFi problems. The comm-manager button for WiFi doesn't work all the times (10% probability of working). Once tapped the busy icon shows up for 10 seconds but the Wifi doesn't start.
Sometimes restart helps but this problem is consistent.
Is anyone else facing it?
Hardware= WIZA200
ROM=11.0.4.0 WWE
IPL=2.26
SPL=2.26
GSM=02.19.11
OS=2.26.10.2 (using a WM6.1 ROM)
I have a similar problem on a 6.5 ROM sometimes. I usually just fix it with a soft reset.
he
i had the same problem.
i dont like it when my dear phone have a problem so i just flashed to another rom.
Mines used to do that too.. but only the first time i tapped it after a soft reset . it would start then off straight away but after the first time it would work normal... the problem was fixed after i switchd roms
Hi,
my vox turns off (completely off, not only display) automatically since yesterday.
Description:
I can switch on my phone, enter SimPIN an can normally use it. As long as i use the vox it stays on.
If i put on the keylock and let the vox untouched for a few minutes, it switches completely off.
The only change i did yesterday was playing around with Navigon Mobile Navigator, FakeCursor and Bluetooth.
I already deinstalled the applications i added yesterday, but same problem.
I also tried a second battery, same problem.
Has anybody an idea or is there like a log on vox, where i can see what causes the shutdown ?
OS: WM 6.5 from Fr. Hottelmann, worked fine for month until yesterday ...
Thanks in advance
Alex
Mh, sounds strange. It usually is a battery problem. Maybe try a hard reset or reflash (maybe also try a different ROM, although I doubt that it is my ROM since this didn't happen to anybody else...yet).
BTW: I have two batteries that don't work correctly, I just ordered a new one.
Hi Fhm, thanks for your reply. A hardreset worked. It seems that Navigon Mobile Navigator 7 combined with the usage of BT Gps causes this problem. Thanks, great forum Alex