Related
I have an HTC touch cruise with the HTC cube !
I would like to remove the cube and have the "SPB mobile shell 2.0" showing up when I slide my finder from bottom to top !!
Is this even posisble ?
Anyone has an idea on how to do it!
Thanks a lot
Dag
I disabled the cube in the registry and just used Mobile Shell's default top-to-bottom drag to activate, but yeah...it'd be neat to be able to swipe from the bottom up to activate Mobile Shell. Email them and ask for it to be added -- perhaps we'll get it in 2.1...
kevsteele said:
I disabled the cube in the registry and just used Mobile Shell's default top-to-bottom drag to activate, but yeah...it'd be neat to be able to swipe from the bottom up to activate Mobile Shell. Email them and ask for it to be added -- perhaps we'll get it in 2.1...
Click to expand...
Click to collapse
I made a change so a slide up activates mobile shell 2. you need to just vjbrisk - works perfectly.
http://www.vijay555.com/?Releases:VJBrisk
basically, follow the instructions there, the file you're looking for to replace is biotouch.exe (you'll need resco explorer or equivalent as it's a readonly file).
regards
Matt
Yeh, the top-to-bottom drag keeps hitting the phone icon and doesn't work. Hope SPB realises this and changes it.
mattxda said:
I made a change so a slide up activates mobile shell 2. you need to just vjbrisk - works perfectly.
http://www.vijay555.com/?Releases:VJBrisk
basically, follow the instructions there, the file you're looking for to replace is biotouch.exe (you'll need resco explorer or equivalent as it's a readonly file).
regards
Matt
Click to expand...
Click to collapse
Could youplease explain what you did step by step, thanks!
Need help
How do I add a City to this Tab in the Picture
Need to add more Citys in Spb Mobile TIME tab
Please do help
What exactly to do if I wanna replace HTC aplication with SPB mobile shell? I have a Polaris and I want to replace default HTC shell. So it is necessary to disable HTC Cube, HTC Today and anything else? And how about it? Thank you very much for an answer.
mattxda said:
I made a change so a slide up activates mobile shell 2. you need to just vjbrisk - works perfectly.
http://www.vijay555.com/?Releases:VJBrisk
basically, follow the instructions there, the file you're looking for to replace is biotouch.exe (you'll need resco explorer or equivalent as it's a readonly file).
regards
Matt
Click to expand...
Click to collapse
it would be nice, to know, exactly, howto ;]
Has anyone else been successful at getting this to work.
I looked on the website and can't figure out how to exactly do this.
Thanks.
search for "motbuttons cube disable" in this forum.
some people report problems with gestures in sms.
instead of gfinder try touchcommander to replace files
in some devices (mine), instead of startAppList look for startupbiotouch.lnk.
good luck !
Hi,
does anyone have an idea how to create a shortcut to the today screen?
i believe it's in a dll or some other hidden windows file, yet i can't seem to find it (and couldn't find it in windows documentation).
I read about some today.exe which was created for this purpose, but couldn't find the file
Anyone smart enough to solve my problem?
Greetz
Just curious, from where do you want to create a shortcut to the today screen?
From iFonz, so i can switch to default today screen fast and easy
just double-press "Windows" button
nemets said:
just double-press "Windows" button
Click to expand...
Click to collapse
doesn't work, it just pops back to iFonz
even when i select the today screen link from the start menu
Try Resco Explorer.
rex4u said:
Try Resco Explorer.
Click to expand...
Click to collapse
Don't see how that would help me, so since you have to pay for it, i would like to find an other way...
Sorry me - I'm the beginner with WM6.1..
Can you please explain how:
1. To make visible the day of the week near the TIME in the first page of Slide Theme?
2. I have installed the Elecont weather and want it's home-plugin to be as the Plugin of Sliding Theme. How can I do that?
I could edit the home screen when I had WM6.0 but now with WM6.1 and Sliding Theme I don't know how...
Thank you!
Nick2001 said:
Sorry me - I'm the beginner with WM6.1..
Can you please explain how:
1. To make visible the day of the week near the TIME in the first page of Slide Theme?
2. I have installed the Elecont weather and want it's home-plugin to be as the Plugin of Sliding Theme. How can I do that?
I could edit the home screen when I had WM6.0 but now with WM6.1 and Sliding Theme I don't know how...
Thank you!
Click to expand...
Click to collapse
1. Use the files attached to this post and copy them to the windows dir. of your device. Please note that these are NOT my files. I got it from somewhere in this forum, but I do not remember where . And I intend to take no credits for it.
2. Use CHomeConfig.
Hope it helped
Is there a way to integrate SPB Time instead of the HTC Alarm?
What about phone suite, anyone managed to get integration in sense GUI
erosennin said:
Is there a way to integrate SPB Time instead of the HTC Alarm?
What about phone suite, anyone managed to get integration in sense GUI
Click to expand...
Click to collapse
No.
But i think SPB Time integrates with WP.
what do you mean wp?
Well, there is a way to integrate G-Alarm, so why not Spb Time? Their 3.0 version is quite nice, by the way.
+1
I must say that I am pretty amazed by the interface of version 3.
Would be great to have it linked with the Sense Home menu.
Anyone managed to do it?
It did work on my Touch HD but not in HD2, so I have now given up completely. I was able to get bits of it to work like phone filtering but it was just too much grief and the today bit keep on being greyed-out.
Now moved over to Magi Call and it is so much better, does calls and sms and I so wish that if SPB bring out a new version that they take a look at this program and try and better it if they can.
Spb time on home screen
M currently using SPB TIME directly from home screen. when i press alarm button it automatically takes me to spb time app, u just need to install cookie's home tab and u can edit alarm in registry.
cheers
try this:
forum.xda-developers.com/showthread.php?t=493810&page=27
(or search for SSMAHO)
...no probs on my HD2 (spbtime, pocketinformant)
mughal90 said:
M currently using SPB TIME directly from home screen. when i press alarm button it automatically takes me to spb time app, u just need to install cookie's home tab and u can edit alarm in registry.
cheers
Click to expand...
Click to collapse
I know it's a long time since you wrote this,but is there any chance
you could post the path to follow to make the reg changes please ?
Or anyone else advise which route to take to make this possible ?
*3 days and no replies *BUMP*
Marct77 said:
I know it's a long time since you wrote this,but is there any chance
you could post the path to follow to make the reg changes please ?
Or anyone else advise which route to take to make this possible ?
Click to expand...
Click to collapse
it´s written in the post already: install Cookies Home Tab. With it instaled you can select any appication to start when clicking to the clock of your Home Tab
use CHT
then in cht Editor > Application
change alarm +/- clock to Spb
Thanx for the replies guys,but this method only opens up the alarm set screen,it doesn't directly open SPB Time itself which is what I'm after (from the home screen rather than using a quicklink)
Edit : I stand corrected I didnt add the clock to the application list,that did the trick cheers.
I can get CHT to link to SPB alarm and it will open it up, but it main tab doesn't show any alarms set. Any suggestions? Thanks.
Will
just do it thru CHT editor..applications duh
mrkevinhall said:
just do it thru CHT editor..applications duh
Click to expand...
Click to collapse
I do it thru CHT editor. It will link the home tab shortcut to SPB alarm, but the alarms don't show up on the home tab.
FYI: I am running Jackos ROM
has someone a 100 percent working solution for that?
bummler said:
has someone a 100 percent working solution for that?
Click to expand...
Click to collapse
yes, it works 100% in my case. I´m using it since several months. As told above I´m using it with CHT 2.0. Just link it with CHTEditor
bummler said:
has someone a 100 percent working solution for that?
Click to expand...
Click to collapse
Matthes42 said:
yes, it works 100% in my case. I´m using it since several months. As told above I´m using it with CHT 2.0. Just link it with CHTEditor
Click to expand...
Click to collapse
if you just need to edit homepage shortcuts it may be a better solution to run CHT 1.6.1, it's lghter and needs less resources than CHT 2.
SPB Mobile shell is another good option, it will show on homepage your spb time alarms
Hello all,
I've compiled a cab file which overwrites the standard PowerOffHint.exe in the windows directory of your TG01 with an enhanced version of EndKey3.6. Now when you perform a long press on the power button the program will execute and list a set of action options, these options include:
Toggle Bluetooth
Toggle Wi-Fi
Toggle Data Connection
Toggle Vibrate
Screen Off
Soft Reset &
Power Off
Credit for the original concept goes to johcos for the EndKey program.
Credit also goes to JHML for the JMLcomm tool & virgilp for the ScreenOff program, both of which I've utilized in this project.
The action menu has been re-skinned by myself(influenced by the GTX theme) to accommodate the revised features included for the TG01 device.
I hope that you find this application useful. Any comments or suggestions would be greatly appreciated.
Kindest regards,
fitzy-boy
Now it work well.
Thank you very much.
Cheers
LeTo08 said:
Now it work well.
Thank you very much.
Click to expand...
Click to collapse
Haha great!
Once I figured out what was causing the issue with the device not turning off it was a simple case of finding a way around it & the EndKey replacement utility has the ability to do just that. It was then just a case of removing what didn't work/wasn't needed like resetting Sense and replacing with tools that others may find useful like toggling Bluetooth on & off.
Thanks for letting me know that it's working on your device.
Kindest regards,
fitzy-boy
wooou, really cool stuff!!!
what you think- the font look better if be bold!?
mirolg said:
wooou, really cool stuff!!!
what you think- the font look better if be bold!?
Click to expand...
Click to collapse
Hi mirolg,
First of all I’m really looking forward to your next Sense ROM release for the TG01.
As for the original skin for PowerOffHint Replacement I tried to keep as faithful to the GTX theme as possible & the font I was provided with didn’t render well in bold type.
However I’ll be more than happy to give it another whirl using a different font style.
Also didn’t you mention you were using this in miROM6? Which is a German language ROM? If so, I’d be more than happy to make a German version with the changes you’ve already requested.
Kindest regards,
fitzy-boy
Hello fitzy-boy,
Thanks for this tool, it's a very good work !
I test to do OEM package to integrate it on my FRA ROM build works but when I click on "JMLComm", "PowerOffHint", etc... I have a message wich say "Can't open file ..... not signed with a trusted certificate ....."
Have you got any idea ?
You can set the cab that nobody can unistall it Than you can use cab install
ALcAtRas500 said:
You can set the cab that nobody can unistall it Than you can use cab install
Click to expand...
Click to collapse
Thanks for your answer, I have test with auto-cabinstall but this cab requires a reboot so when you install the ROM, auto-cabinstall don't stop you must press Power button for reboot and the auto-cabinstall restart after few seconds ....
With OEM I have almost succeeded, just shutdown don't work .....
EVEALEX62 said:
Thanks for your answer, I have test with auto-cabinstall but this cab requires a reboot so when you install the ROM, auto-cabinstall don't stop you must press Power button for reboot and the auto-cabinstall restart after few seconds ....
With OEM I have almost succeeded, just don't work .....
Click to expand...
Click to collapse
i don´t know what yours problem with normal cab cooking. in miROM6 i have use as normaly cab .
when use as OEM look in his .rgu and change the path from shutdown.exe
mirolg said:
i don´t know what yours problem with normal cab cooking. in miROM6 i have use as normaly cab .
when use as OEM look in his .rgu and change the path from shutdown.exe
Click to expand...
Click to collapse
You have right my friend I take your Cabs collection and with your "PowerOffHint" it's works ....
Thanks a lot !
Great Cab.
It's my numero uno since I installed it.
But.... It won't autorotate and is there a way to skin it differently as I don't use Sense? I'm old school and prefer to use Titanium.
Rotation + Skinning
b0s said:
Great Cab.
It's my numero uno since I installed it.
But.... It won't autorotate and is there a way to skin it differently as I don't use Sense? I'm old school and prefer to use Titanium.
Click to expand...
Click to collapse
Hello b0s,
As far as I am aware Endkey Replacement never came with that feature built in. You'll have to ask johcos if it's something he's willing to look at in future updates.
As for skinning, yes to can customize the look of the app by changing the .brn files.
Hope this is of help to you,
Kind regards,
fitzy-boy
Just found this, thanks added via another post elsewhere