Could some one please upload a cab file for JETCET Print from the original HD2 rom.
Thanks in advance.
bump.......
If someone could link to some instructions in how to make a cab file from a piece of installed software, I can do it for you.
JETCET5_PPC_v5.0.904.5.131.CAB
If you cannot find the JetCet print from HD2 I have one from omnia, that I have downloaded yesterday, because I could not found any other. If you found JetCet print for HD2, I too would be glad to have it.
swordfish_HTC said:
If you cannot find the JetCet print from HD2 I have one from omnia, that I have downloaded yesterday, because I could not found any other. If you found JetCet print for HD2, I too would be glad to have it.
Click to expand...
Click to collapse
The one you have frommthe Omnia does it work with IE6?
i used search !
dragon_soft said:
Could some one please upload a cab file for JETCET Print from the original HD2 rom.
Thanks in advance.
Click to expand...
Click to collapse
I just did a search on 4shared and found it there
http://search.4shared.com/network/search.jsp?searchmode=2&searchName=jetcet
the latest is version v5.2.1059 i guess !!!
I forgot to say it works with HD2
JETCET5_PPC_v5.0.904.5.131.CAB
I am not sure, dont use, dont have IE6. I use Opera 10 and that works. I guess that version presented by skoogee is satisfatory, if not, let me know..
Does no one, I don't believe it, can manage to get the Jetcet version from an HD2??!??!
Note that version is not 5.2 but 5.4.something...
Is that so hard to help anyone on this???
I found this here, http://forum.xda-developers.com/showpost.php?p=5430440&postcount=3
http://rapidshare.com/files/333642584/RTT_JETCET_PrinT_5_4_1187_01.cab.html
Don't know if it's the real deal, due to rapidshare...
Tried to install that version but in the end of the instalation said unsuccessful
JECTCET
This will work I use it myself on my Leo
The actual app made for the HD2 is 5.4.1187
The cab was pulled by Dutty.
works a treat... nice one...
anyone know if there is a newer version than that 5.4 one which may have been released on a newer ROM.
Some folks are never happy
bobzero said:
anyone know if there is a newer version than that 5.4 one which may have been released on a newer ROM.
Click to expand...
Click to collapse
Just kidding. What's wrong with 5.4.x? It's a fairly basic though well done, especially compared to the extremely stoopid HP iPrint. Well, iPrint is not THAT bad, but does suffer from one overwhelming issue: It uses every graphic file, from every folder on the device by default, and I'm not even sure there is a way to select a particular path. I didn't get that far, since it brought my HD2 to s crawl, reading in all those photos. If they just fixed "File and Folder Selection", such a basic thing, they would actually have something there.
Now that I think about it, I can see one REALLY good reason for wanter a new release... support of new printer models, "DOH!"
Which leads to a question (doesn't everything?) I have an Epson Artisan 810 printer, an all-in-one thing, but of course its not listed in setup. I just tried other models until I got a successful test page. This is VERY hit and miss (more miss that hit, LOL) Anyone know how to either add support for Artisan line, or which "Stylus" or Stylus Photo etc., would best emulate the Artisan 810?
I don't need it to do anything other than print photo's. In fact, that's all I want to be able to do, text is not important.
Any thoughts on this?
@smartassphone,
new printer model support is exactly what i am hoping for. Specifically Canon MF4xxx series. I tried each model offered by jetcet, one by one, and none worked.
I hear ya
bobzero said:
@smartassphone,
new printer model support is exactly what i am hoping for. Specifically Canon MF4xxx series. I tried each model offered by jetcet, one by one, and none worked.
Click to expand...
Click to collapse
Ugh. Yes, starting to see that is indeed the issue, although, my experience has been that you can usually achieve some basic level of printing, if only you can find a base emulation mode for the printer in question.
So far, I HAVE been lucky enough to at least get the Test Print page to spit out okay (but printer did not see the job as "finished" so I am still in that trial mode - I doubt I would bother to try EVERY Epson model, there must be 60 or more listed, but I am trying a few from each "family" of models.
DO not be afraid to step outside your brand, at least into the HP Models, I got this to work a long time ago by using a basic HP driver selection (ahh, for the days when MOST consumer printers did some level of HP emulation.
I will check back and provide a link if I find any newer printer support, in either a new JetCet or whatever.
Have you been successful in looking for a listed Epson-model that works for your artisan? I do have the german version of this printer and have tried some of the Epson printers listed in the jetcet-program ... I got results - but very, very bad ones
Epson Artison 810 Equivalent Driver
I setup JETCET using an EPSON Sylus R380 driver for my Epson Artison 810. Test Print worked well. So far, so good.
TP2 Stock ROM with JETCET PRINT v5.4.1187
Kevoooooooooooooo
Related
Hey guyz,
well, It's that time.. in the next few months I am looking to upgrade my li'l QTEK S110 and I am looking for some sort of 'easy to view' pages to compare all the different pda phone models to see which will be best for me.
I love the size of my S110, so will be looking for something of a similar size. I'd like WIFI, as I work right on top of a couple of hotspots. Bluetooth .. well, haven't really used it.. um infrared? well no not really used that either, but I guess if its on the phone.. I'd love to have GPS, as I do travel.. um.. a full size keyboard might be fun.. but I have got used to just using a stylus (yes, it is a pain in the ar$e at times) I use my phone to play music and I sync emails etc using the excellent syncexpress. The obligatory USB connection is a must and a decent camera would be good too. I am currently using SD cards and have loads of 'em spare, so if the new phone used them as well, that'd be a bonus too!!!
So, can you good folk help?
Thaaaaaank you!!
yo dood,
you can help your self and check all the pdas with detailed,Compared Specifications on the market on
www.pdadb.com
BTW
hard to fined pda that support sd or mmc anymore,(the best now is minisd).
Ah!!! Thanks for the link! I'm off to check it out.
Much appreciated. ;o)
Any more out there folks?
HTC have a very useful comparison page on their website. If you're after a HTC, it's a logical place to look.
V
Yes, thanks Vijay, Actually, I'm there now! ;o) I'm just seeing at the moment if the Orbit/PP3300 is the only HTC handset with GPS. I think it is.
Hy guys! long time no see ... i have a question 4 u guys ... i whant to buy a pda phone! can any of you guide me, or tell me please which pda phone is better? i like the htc tytn II, but should i wait for the Xperia X1? or could you recomend me something else? thank you
if you are rich guy then tytn is good . but if you want GPS to work on full efficency then i prefer artimes best phone i have ever used
why artimes is best for me
1.uses sirf gps best GPS quality
2.Lots of roms are there for artimes so you can keep on changing
stylus1828 said:
Hy guys! long time no see ... i have a question 4 u guys ... i whant to buy a pda phone! can any of you guide me, or tell me please which pda phone is better? i like the htc tytn II, but should i wait for the Xperia X1? or could you recomend me something else? thank you
Click to expand...
Click to collapse
I would recommend HTC HD
But first check here so you can make your own slection based on what you really need form a PDA:
http://www.pdadb.net/index.php?m=pdachooser
Cheers,
Assuming money isnt a problem.
You need to know what you wanna do with the PDA.
1. Do you need GPS?
2. Do you play games?
3. Fast internet?
4. Do alot of typing?
5. Powerful Processor?
6. music and/or video?
7. Advance configuration like changing roms, cooking and major software tweaking?
If all the above is yes. Raphael is the overall best.
Touch HD got no D-pad so gaming is a little tedious. It also does not have a keyboard but has a superbly large screen.
Processor need not be powerful and need not type alot? got for Asus. P750 if u have the budget P320 if not.
Are you intending to learn to cook roms and develop software. Try HTC G1 android.
They're all my opinions only. As Orb3000 wrote "But first check here so you can make your own slection based on what you really need form a PDA:
http://www.pdadb.net/index.php?m=pdachooser"
thank you guys! artemis is HTC p3300?? how about samsung omnia i900? is it good? i like the design and the specs ... i like the HTC HD but the price is so high ... 700 euros ... that's a lot of money that i will never spend on a PDA phone! I had the LG KS20 in may this year and i was very, very disappointed!
stylus1828 said:
.. samsung omnia i900? ..
Click to expand...
Click to collapse
So far there has only been one good response to your question (Serphinox). You need to identify what YOU want the phone to do and be specific. All you will get is blatent favourtism with the way your question is worded.
Blatent favourtism...... (and my honest, very experienced opinion)
I have owned serveral HTC phones and regreted each one eventually. I now have an Omnia with the HJ5 firmware (a must!) and its absolutley awesome. It kicks some serious HTC booty. I've had a Blue Angel, TyTN, TyTN 2 and currently still own a Touch Diamond (Of all my HTC phones, I've had at least 2 of each due to hardware failures/poor manufacturing). Which phone do I use everyday? The Omnia.... no contest. The Omnia does have a lower res screen than HTC devices but actually, this is well thought out. It allows for a longer battery life, its VERY fast at updating (even my TD with Swiftblade 7.5 don't stand a chance) and .... because its low res, its VERY finger friendly like the Iphone. Put simply, it works. I now have zero issues with it, something I have NEVER been able to say about ANY HTC phone i've used. It simply does its job, everytime, 100% of the time with no fuss. Note though: Because of the screen res, don't buy it if you want to play games as they are generaly written in the standard screen formats of which this is not. Btw, dont use Samsung Widgets, they are for Joe Punter, you want Samsung Today 2... its the daddy!
Oh, who else has 32gig storage in there phone? Currently I have some 2500+ songs and iGO8 with all the world maps ..... and still loads of storage free
You know, i've also owned a Tosh G900 which was FAR from "tosh" and again an excellent phone. I only wish more people realised there was more to life than HTC.
edit: Your signature disagrees with your comments
.....
edit: Your signature disagrees with your comments [/QUOTE]
edited my signature .. thank you for the great answer ! gonna get the omnia ... maybe dont know 4 sure but i believe it's a great deal. you say that the ress of the omnia screen is different from the other phones and i will not be able to play games ... now that's not GOOD
now i own a nokia e71 and i can change the ress of games and than install them into to my phone and they work ... is there a way that i could change the ress for the games that work on wm 6 devices??
stylus1828 said:
.....
.... you say that the ress of the omnia screen is different from the other phones and i will not be able to play games ... ...
Click to expand...
Click to collapse
its not that you WONT be able to play games, its just that you need games that are coded to work with odd screen sizes - and this can be limiting. I think its fair to say that most games written now are for 480*640 (640*480) and this is not the Omnias screen size. That said, the Omnia does seem to be selling very well so I would hope more developers start creating there apps to scale mathmaticaly rather than fixed for a specific size.
Should you wish to use SPB Shell, you are also limited to the amount of custom skins available however, this will grow .... you could even create your own!
As for your games, I would think you will be ok. They should be on your PC in your activesync program. Once you create a new sync between the pc and your new device, you can then go into activesync's add programs section and select to install. Of course, if you have the individual .CAB files (which are also actually on your pc as well) then you can just drag these on to your new device and install.
edit: I cannot stress enough though, you need to update to the HJ5 rom if you buy it. Details can be found at i900.modaco.com.
I vote for the Touch Pro.
In my opinion HTC devices I own or owned (Universal, Tytn and Touch) are great devices, never had problems with them, so that makes me stick to HTC because their experience manufacturing WM powered devices, also the great support and the main reason because of this wonderfull site!!.
If you decide for the Omnia you will not have the support form this site has for HTC devices (I´m sure exist another sites for Omnia)
So once again I´ll recommend an HTC device absolutly
Just my personal opinion
Good luck on your decision!
orb3000 said:
...
If you decide for the Omnia you will not have the support form this site has for HTC devices (I´m sure exist another sites for Omnia)
....
Click to expand...
Click to collapse
Yes you do, search and see! Windows Mobile is Windows Mobile You can also get cooked roms also from various sites.
However, OP, you have not really said what your requirements are and you need to. Be specific and people can really recommend properly rather than our phones
Monty Burns said:
Yes you do, search and see! Windows Mobile is Windows Mobile You can also get cooked roms also from various sites.
However, OP, you have not really said what your requirements are and you need to. Be specific and people can really recommend properly rather than our phones
Click to expand...
Click to collapse
hhmm ... this would be the important specs: big screen (minimum 2.8 inch), gps, bluetooth, wireless, 128 ram, 256 rom, 400 mhz procesor, 3.2 mp camera with autofocus, qwerty keypad !
Whats got two cylinders, does 0-60 in 3.8 seconds and holds the production record for top speed in its class?
OFFTOPIC! Monty is this your bike ???
yup. And I love it.
Monty Burns said:
yup. And I love it.
Click to expand...
Click to collapse
nice bike hope you're not to crazy to go full speed with it anyway ... i'm gonna get the omnia i900 ... i think =))
stylus1828 said:
nice bike hope you're not to crazy to go full speed with it anyway ... i'm gonna get the omnia i900 ... i think =))
Click to expand...
Click to collapse
as long as you upgrade to latest firmware (see i900.modaco.com) you won't regret it. I would recommend though you try and see if you can get an Omnia-T. As mentioned, same phone but has DVB-T and 800*480 screen - although this will decrease battery life a little.
Anyway, enjoy!
Monty Burns said:
as long as you upgrade to latest firmware (see i900.modaco.com) you won't regret it. I would recommend though you try and see if you can get an Omnia-T. As mentioned, same phone but has DVB-T and 800*480 screen - although this will decrease battery life a little.
Anyway, enjoy!
Click to expand...
Click to collapse
Double resolution?????? DVB-T Support ???? BUT,
Omnia -T is for Korea??? if yes I dont know how i'm gonna get it!
Ebay is your friend (if you can stretch to a non-contract phone) or im sure it will be available in the UK/Europe soon
finally got my OMNIAAAAAA ! it's such a beautiful phone and smart 2 !
Monty Burns said:
I only wish more people realised there was more to life than HTC.
Click to expand...
Click to collapse
I only wish more people realised there was more to life than a HTC forum.
I know the PPC's do it. Also, they say that most of the Qualcomm processor based Smartphones have TV OUT capabilities. Just a matter of getting the right drivers. So far, no luck on my end getting this to work using the ACT100 HTC TV OUT cable (using a HTC Maple, and Ozone/Cedar). If anyone feels like chiming in or have info about drivers, etc., please post here! Would be cool to be able to output our Smartphones to a TV or car GPS unit.
would the cab linked here provide any help?
http://pocketnow.com/how-to/htc-touch-pro-fuze-users-how-to-get-tv-out-for-3
Not really. Thats for PPC. Looks like it's the drivers we need. Thanks.
ookba said:
Not really. Thats for PPC. Looks like it's the drivers we need. Thanks.
Click to expand...
Click to collapse
Oh my mistake I thought the Touch Pro would possibly help as it was also a phone. Guess I don't really know the difference.
Hi
have anybody tested this modem in the hp touchpad?
ebay.de/itm/Ericsson-F5521GW-HP-TouchPad-MobileBroadband-HSPA-21Mbps-for-HP-TouchPad-/250903976024?pt=AU_Modems&hash=item3a6b0ad858
Are there any driver for Android oder WebOS?
foxhd said:
Hi
have anybody tested this modem in the hp touchpad?
ebay.de/itm/Ericsson-F5521GW-HP-TouchPad-MobileBroadband-HSPA-21Mbps-for-HP-TouchPad-/250903976024?pt=AU_Modems&hash=item3a6b0ad858
Are there any driver for Android oder WebOS?
Click to expand...
Click to collapse
I don't know if there are going to bemany people who are willing to crack open their TPs to test this. I would also doubt that there are going to be any android drivers since that would require that the developers have a TP with this installed. Very unlikely.
Thanks for this fox!! I was always wanting to see about adding a radio card to the TP. I knew the difference between the cell version and regular version of the TP had to be a simple module connected either via ribbon, coaxial, or both. Some simple empty space ready for a radio card to be plugged into it. I guess I was partially right. :3
I really will consider doing this. Although I am loyal to T-Mobile USA and it doesn't seem to support this Going to check out some disassembly videos and see what I'm up against. But it would be nice to have a cell-capable TP.
Bookmark saved, thanks again!
What about this one?
Ericsson F3307
Seems to be the same one used in epad, so I'm guess there are drivers for it; so I'm guessing it can be used on android, but for webos it'd need porting - maybe from the android version or the linux version (don't know what the dependencies are).
Or maybe others too.
teardown with good pics:
http://www.techrepublic.com/blog/it...-like-a-pc-and-straightforward-to-repair/2707
I just want to save someone from damaging their TouchPad doing this mod. The modem will not work on a WiFi model since their boards are different. The 4G model has the connection for the AT&T modem whereas the WiFi model doesn't have the connection present. I've learnt this through swapping parts out for servicing my TouchPad 4G on a mule TouchPad WiFi.
Hi,
i would like some help to see if the device i have has any other custom firmware,
i have attached a few pics of the device.
the discription that was provided by the vendor is as following
7" TFT screen, A9 core 1.5ghz, 512 ram ddr3, 8gb internal memory, andoroid 4.0, has GPS, TF card support upto 16gb, VGA front camera.
NO bluethooth,
the model no. assigned by the manufacturer / vendor is ET-6018 , being sold on egmemory.com...
to be honest i knew that the tablet will be slow... but its so slow that even opening a single menu takes ages...
i cant return it as the vendor is being very A**holic...
i was wondering since i cant use it or return it... mite as well flash it with a custom rom.
please help me to identify this tablet's common name and if any custom roms are availabel for such device.
many thanks
Try this link for more information possibly....I've been searching a while on your subject and it's extremely difficult to find an exact "common" name for your device
http://www.slatedroid.com/forum/222-unlisted-cortex-a9-tablets/
If this helps hit thanks!
Sent from an Amazon Gindle Fireoid
Some Info found
I managed to get a little further, and i hope the info helps? Im English but based in Aisa, and often have to source hard to find manufacturers. I couldnt read the model number in your last photo, but as it says on the back of the Tablet, it is made by a company called Easy Groups, who specifically manufacture Memory modules. The main website is egmemory.net
In the support section, they have manuals and firmware downloads, but i stopped there because i couldnt read the model number. The link to the support page is...... egmemory.net/download.php?lang=eng (add the 3 ww's in front)
The only ROMs i could see listed however, where Chinese ROMs but i would have thought there would be an English language option somewhere!
I hope this helps?
John
johnmcavoy said:
I managed to get a little further, and i hope the info helps? Im English but based in Aisa, and often have to source hard to find manufacturers. I couldnt read the model number in your last photo, but as it says on the back of the Tablet, it is made by a company called Easy Groups, who specifically manufacture Memory modules. The main website is egmemory.net
In the support section, they have manuals and firmware downloads, but i stopped there because i couldnt read the model number. The link to the support page is...... egmemory.net/download.php?lang=eng (add the 3 ww's in front)
The only ROMs i could see listed however, where Chinese ROMs but i would have thought there would be an English language option somewhere!
I hope this helps?
John
Click to expand...
Click to collapse
I also saw those firmware updates on that website and I clicked the one for the et-6018 and it took me to a dead page. The other links for the other models did the same
A little secret...;o)
If you do the non obvious and do a right click, then select open in new tab, it downloads the 'firmware' for the manual it opens a PDF in a new window.
Unfortunately the 'firmware' on offer is just a utility tool for upgrading and is 1MB in size called Phoenix Card and has a handful of DLL's with it. I did a little more digging and picked up hints to follow 2 models, CWM MK802 and CM10
I did find this though, i wonder if this would work, the author states its a slim custom ROM for the A9 but doesnt state its for any particular model...
//androidforums.com/a9-all-things-root/647394-karbonn-a9-custom-rom-mysticmod-v1.html (add http at the start)
John
Strange..ive been a member for over 6 years with dozens of posts, but somehow my post counter has been reset to 5???
johnmcavoy said:
If you do the non obvious and do a right click, then select open in new tab, it downloads the 'firmware' for the manual it opens a PDF in a new window.
Click to expand...
Click to collapse
I'm using a tablet with a crappy browser......no right click or option to save lol
Sent from an Amazon Gindle Fireoid
No Right Click?
Now who in their right mind buys these Chinese tablets???......
johnmcavoy said:
Now who in their right mind buys these Chinese tablets???......
Click to expand...
Click to collapse
lol....what tablet isn't made in China?
Sent from my rooted SCH-R880 POS
Made in China?
Those made in Taiwan perhaps??....
Seriously though, these little tablets are quite addictive to play with! When im not at home in the UK, im in Indonesia for most of the year, there is a local market that sells second hand stuff, like a flea market. I often find broken or used tablets for as little as $10 I have about 15 of them now. One i have hacked to the extreme hardware wise, inside i fitted a 4 port hub, a second camera facing forward, a wifi mouse and keyboard dongle, a broadband dongle and a second USB port on the side, maybe i should post this as an instructable? Another i have used the insides as a controller for an amateur radio transmitter.
John
johnmcavoy said:
Those made in Taiwan perhaps??....
Seriously though, these little tablets are quite addictive to play with! When im not at home in the UK, im in Indonesia for most of the year, there is a local market that sells second hand stuff, like a flea market. I often find broken or used tablets for as little as $10 I have about 15 of them now. One i have hacked to the extreme hardware wise, inside i fitted a 4 port hub, a second camera facing forward, a wifi mouse and keyboard dongle, a broadband dongle and a second USB port on the side, maybe i should post this as an instructable? Another i have used the insides as a controller for an amateur radio transmitter.
John
Click to expand...
Click to collapse
Nice
Sent from an Amazon Gindle Fireoid