Database Info

[ROM - 32B] ZeroXd 5.2r4 / JACHeroSki-v2.0 [09/11/2009 - 11:47AM EST]

I will be accepting donations if you like my work. After contacting HTC, they informed me that my device is not under warranty, as a technician determined it to be "user related" damage and that all repairs will be at owner expense.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8141983
If you follow my twitter, you know I bricked my G1. I am trying to get it repaired, but due to the long response time I had to buy a mytouch (no point having two G1s IF the other one gets repaired). Using this bad luck to my advantage, I scripted a way for hero to run on both with two simple commands.
How I rooted a brand new "perfected SPL" MT3G and installed Hero in 15 min:
http://forum.xda-developers.com/show...&postcount=154
Link to original thread: http://forum.xda-developers.com/showthread.php?p=4365404#post4365404
Updated, but still feeling slow? Back up. Try rm system/sd/app_s then reboot to recovery and wipe data. then install fresh. Before restoring your data, open the backup folder on your sd card and remove the subfolders for programs you no longer have or need to have backed up.
I noticed a 10% increase in speed and my phone was far from lagging to begin with.
Losing messages? Make sure that system/sd/app/com.android.mms.apk does NOT exist, as this was an old release. Go into settings for messaging (from the conversation list panel) and set priority to "High"
Most Recent:
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.0.zip
Now includes dynamic swap. Rewrote the method of apps to sd for myTouch.
Build will move system apps, user apps, and dalvik to sd on a g1 device.
Build will ONLY move user apps to the sd when using a myTouch.
This will allow the system apps and dalvik to remain on internal device.
This is a completely new method of doing a merge build so bear with me.
I am going to be rewriting things for users without a lot of user apps, like myself.
This will allow the entire build to be placed onto internal for mytouch users.
Once you have updated and are ready to use the phone, execute Terminal and enter the following commands:
su
magic
This configures the system to the specific device. This is until I finish automation.
LEDs have been restored to 93%
Bluetooth restored in MT3G
Porting my own boots for MT3G
Based on the System Image from Haykuro
Using the Kernel and Boot.img from JAC
Extensive system script edits were done
SwitchROM installs itself to system/sd/
LEDs are at about 90-100% brightness
CPU Optimization turned off by default
Enhanced Terminal included
Fixed My Account included
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.2r5.zip
http://twistedumbrella.slackdev.com/Resources.zip

twistedumbrella said:
MultiTouch for MT3G being patched NOW
Click to expand...
Click to collapse
Does that mean multitouch doesn't work and one more unanswered questio IS it from the latest release that modaco did, i asked it since 5.0 so please answer

White Rosie doesn't work i tried it but i doesn't show up and it doesn't even install shows parse error, can you do something about that. Really appreciate your work. Will donate as soon i finish with my exams, I came to US for a holiday for 3 months and as i came back i have exams, only 3 left, have to finish 6 books per subject (thats f*****ng 3 months syllabus) and i have exams after 2 day holidays , thats why i have been a bit inactive in the community, will be active on 24 and will provide a special version of HERO based on my favourite ZEROXD.

Installed JACHeroSki 2.0 and i get stuck on a boot loop. i've tried wiping and re-flashing and same thing.

mgorman said:
Installed JACHeroSki 2.0 and i get stuck on a boot loop. i've tried wiping and re-flashing and same thing.
Click to expand...
Click to collapse
For me 2.0 working fine,but cannot install ZeroXd-5.2r4-installation aborted:/
In v2.0 cannot run wifi:/somebody else?

Had to fix scripts. Check the link on original thread for download. They are the same files. The verification fail happens when your downloading as I upload. It was a last minute fix on the way to work. Sorry for the issues.

hey twisted...great work on the roms...
couple issues with me...
auto-rotate doesn't work...
auto correct and dictionary doesn't work also...
is there any way we can correct this?

tq745 said:
hey twisted...great work on the roms...
couple issues with me...
auto-rotate doesn't work...
auto correct and dictionary doesn't work also...
is there any way we can correct this?
Click to expand...
Click to collapse
What device are you using? MyTouch? Did you run the terminal command?
BTW, for everyone else: http://twistedumbrella.slackdev.com/user.conf
Did some testing, seems to run a little smoother

tq745 said:
hey twisted...great work on the roms...
couple issues with me...
auto-rotate doesn't work...
auto correct and dictionary doesn't work also...
is there any way we can correct this?
Click to expand...
Click to collapse
Thank you... h.nocturna for the fix, and nacron for the heads up...
Here is the fix for auto-complete... Worked for me on 5.1r2
Everything in
open dos prompt.
adb remount
(***back up the original***)
adb pull /system/sd/app_s/HTC_IME.apk c:\(*your directory*)\HTC_IME.apk
(***install the new one***)
adb push c:\(*your directory*)\HTC_IME.apk /system/sd/app_s/HTC_IME.apk
start your Messaging it will crash the first time you want to use the keyboard... restart Messaging and it should work...
HTC_IME.apk here: http://www.mediafire.com/?te0symyx4yz
Mms auto-rotate works for me in 5.1r2 so I dont know. But possibly you still have the old Mms.apk. Try pushing the new one from 5.0 or later rom...

Twisted are you using BFS in your new builds??? Post 5.1 that is....

twistedumbrella said:
What device are you using? MyTouch? Did you run the terminal command?
BTW, for everyone else: http://twistedumbrella.slackdev.com/user.conf
Did some testing, seems to run a little smoother
Click to expand...
Click to collapse
so i opened up better terminal and when i entered su it says
/system/xbin/su: not found
help?
in the meantime i'll try zambesey's way

twistedumbrella said:
What device are you using? MyTouch? Did you run the terminal command?
BTW, for everyone else: http://twistedumbrella.slackdev.com/user.conf
Did some testing, seems to run a little smoother
Click to expand...
Click to collapse
so i opened up better terminal and when i entered su it says
/system/xbin/su: not found
help?
in the meantime i'll try zambezy's way

same issue as above :-(

1.8 is running pretty awesome.
i guess its safe to assume that i shouldn't try 2.0 yet? lol

zeroxd 5.2r4 seems to be faster than jacs 2.0 but i cant get auto rotate to work or multitouch and when i try the commands in first post i get "/system/xbin/su: not found''

did you try running the commands via adb ?

im not familiar with doing it that way i dnt even know wat adb is

just connect your phone to the pc
install the drivers from android SDK
start > run > cmd
cd to the android tools directory
and adb shell
that's how i did with my phone and works perfectly

im not gona risk any damage ill deal without the rotate for a day till its fixed

tq745 said:
so i opened up better terminal and when i entered su it says
/system/xbin/su: not found
help?
in the meantime i'll try zambezy's way
Click to expand...
Click to collapse
should be under /system/bin not xbin

Sprint Stock Rom with A2SD Support

This is the latest Sprint Rom based on the latest RUU leak with A2SD support (I used Darktremor A2SD 2.7 since it was easy to add it).
I have verified that A2SD is working as I downloaded and installed a couple of programs from the market. The programs are being stored in /system/sd/app.
Here's the link: http://www.darktremor.info/files/2.1/2.1-ruu-a2sd-signed.ziphttp://www.darktremor.info/files/2.1/sprintstock-21-a2sd-b-signed.zip
This one now has adb rooted (thanks to nfinitefx45 for his assistance) and does flash (heard complaints on the symlink issue...never sure what causes that, but ended up starting over and porting the files from the previous build).
This is for those people who want to keep with the stock installation but want the addition of A2SD. If you want a customized look, faster performance and A2SD support, I suggest a custom rom. Fresh 2.1.2 or FreshToast is a good one to use.
Note: It will not affect recovery.
Enjoy and I'll answer any questions you may have (if I can answer them).

did you manually edit the init.rc? and you should mention that this is a ROM, not an RUU

tkirton said:
This is the latest Sprint RUU leak with A2SD support (I used Darktremor A2SD 2.7 since it was easy to add it).
This is definitely an RUU as when I go into adb shell, I get the dollar sign as a prompt rather than the pound sign...I'm pretty certain it is not rooted.
.
Click to expand...
Click to collapse
<<<snip>>>
This makes no sense at all.

Good point about the Rom vs RUU. Edited to correct.
As for the init.rc. Mainly it was init.rc edit.
regaw_leinad said:
did you manually edit the init.rc? and you should mention that this is a ROM, not an RUU
Click to expand...
Click to collapse

Don't look at me...that's what I'm getting. Doesn't make much sense to me, either. I just know if I do adb shell, I don't have root access. But A2SD works fine.
I went ahead and released it since the goal was to get A2SD working...and I did that. Everything else is for a Rom developer.
wctom said:
<<<snip>>>
This makes no sense at all.
Click to expand...
Click to collapse

tkirton said:
Don't look at me...that's what I'm getting. Doesn't make much sense to me, either. I just know if I do adb shell, I don't have root access. But A2SD works fine.
I went ahead and released it since the goal was to get A2SD working...and I did that. Everything else is for a Rom developer.
Click to expand...
Click to collapse
Thanks, I'll just use your boot image for RegawMOD 2.5. saves me a few minutes

working perfectly all apps installed and 132 megs still open internal
Sent from my HERO200 using the XDA mobile application powered by Tapatalk

sandboxlove said:
is it a general consensus that if you want to run a2sd successfully you should use a class6? i currently have a class4
Click to expand...
Click to collapse
right now, I switched back to my class 4 and its working great

nvmchars....

tkirton,
here is your exact rom that's in your first post, but I deodexed it. You can add that to the OP if you'd like.
Everyone else, here it is too:
http://www.4shared.com/file/Fm3pXapi/21-ruu-a2sd-deodexed-signed.html
I have not tested it, but it should work fine. Deodexed /system/app and /system/framework

sandboxlove said:
i just want to be clear...this is the latest sprint leak? you seriously deodexed the whole thing?
i thought vince was crazy for trying, your completely BANANNAS
Click to expand...
Click to collapse
yeah, i thought I'd post it in here. Didn't think since it's the same thing as he posted but deodexed that I should make another thread.
and yes, the latest sprint leak. you should test this. I can't right now.

Oooh...cool. Enhancements. I like enhancements.
regaw_leinad said:
tkirton,
here is your exact rom that's in your first post, but I deodexed it. You can add that to the OP if you'd like.
Everyone else, here it is too:
http://www.4shared.com/file/Fm3pXapi/21-ruu-a2sd-deodexed-signed.html
I have not tested it, but it should work fine. Deodexed /system/app and /system/framework
Click to expand...
Click to collapse

tkirton said:
Oooh...cool. Enhancements. I like enhancements.
Click to expand...
Click to collapse
Well, I like your work, so that's for you
did anyone test it out to make sure it boots?

Sorry to be such a noob, but what is "deodexed" a ROM mean?
regaw_leinad said:
tkirton,
here is your exact rom that's in your first post, but I deodexed it. You can add that to the OP if you'd like.
Everyone else, here it is too:
http://www.4shared.com/file/Fm3pXapi/21-ruu-a2sd-deodexed-signed.html
I have not tested it, but it should work fine. Deodexed /system/app and /system/framework
Click to expand...
Click to collapse

Well I flashed it and stuck on the HTC screen. Flashed the non deodexed version and loads fine.

So apparently i f***ed up deodexing lol. I guess that ROM that I did wont work..

well just loving this rom, but one question, can we get a updated boot.img with the adb enabled for access as root?

Now that the A2SD stuff is behind me, I'll take a look at that. Flipzmode or Toastcfh may be able to shed some light on how you get this image rooted correctly, especially Flipz since he's using the latest leak for Fresh 2.1.1.
The original goal was to get A2SD working on a stock rom, which I did....but it is rather annoying that it isn't rooted (or fully rooted).
Damage said in his point that it was rooted, but I got the same thing you did...no root when doing adb.
I'll talk to Flipz or Toast and see if they can point me in a direction to go.
nfinitefx45 said:
well just loving this rom, but one question, can we get a updated boot.img with the adb enabled for access as root?
Click to expand...
Click to collapse

well this is a piece from some of the reading I've been doing I beleice this needs to be done with in the boot image. I dont know if this will help in your research,
-------------------------
You also need to modify the ROM update script to change the default permissions for /system/bin/su so it can be used to elevate privileges to root. The script is in $WKD/dst/META-INF/com/google/android/update-script. Open it in your favorite editor and find the line starting with set_perm 0 2000 0550 SYSTEM:etc/init.goldfish.sh and after it add the following set_perm 0 0 04755 SYSTEM:bin/su
=======================

Hi tkirton,
Nice job on this and thanks for all your hard work on everything! I am also wondering what dedoxed means? Is it like where application data is also stored on the SD card instead of on the phone itself?
Thanks!

Droid X Multitouch KB for Eclair ROMs

Here's a working kb that I know works for eclair roms (more specifically, it works for me on Darchdroid 2.7 (an AOSP ROM). If anyone is able to get this to work okay using sense roms, that's great, otherwise, sorry.
Just put the file into u'r c:\ folder and push it via adb
Code:
adb push c:\DroidXIME.apk /system/app/
I just added the 'q-ime.apk' file as well. This file is similar to the DroidXIME.apk file, but, in my opinion, it seems to have better response than the droidxime.apk file. It also fixes a problem with displaying a correct symbol in the characters section of the kb.
Enjoy

I installed it via Astro manager, but even though it shows it's installed, I cannot find any settings to assign it as the default keyboard. Would it have anything to do with it being the latin keyboard? I do see the settings for "multitouch keyboard" but that's it. Also is there any visual difference between this one and the stock keyboard?

It'll look the same or similar to the stock KB. The multitouch is this KB
Sent from my Hero CDMA using XDA App

Androidious said:
Here's a working kb that I know works for eclair roms.
Just put the file into u'r c:\ folder and push it via adb
Code:
adb push c:\DroidXIME.apk /system/app/
Click to expand...
Click to collapse
i honestly dont know...whats the big deal w/the droid x board?
thank you thank you

Here's another ported kb, it's similar to the above file, but it has the ;amp problem fixed after I pushed it to my phone it works fine as well... Yeah, it's just another kb to use
Sent from my Hero CDMA using XDA App

i get fc's also. i used the q-ime.apk for the update...the fix
edit: how do we get it off of our devices?
thank you thank you

tailsthecat3 said:
i get fc's also. i used the q-ime.apk for the update...the fix
edit: how do we get it off of our devices?
thank you thank you
Click to expand...
Click to collapse
I'm surprised it doesn't work for ya... you just have to go into the shell after mounting /system and
Code:
rm q-ime.apk
Code:
reboot
Sorry it FC's on ya
They both work just fine for me. Stinx they aren't workin for ya
I basically posted this for someone on IRC so they could get the apk easily. Maybe it's only functional for AOSP roms... dunno

Androidious said:
I'm surprised it doesn't work for ya... you just have to go into the shell after mounting /system and
Code:
rm q-ime.apk
Code:
reboot
Sorry it FC's on ya
They both work just fine for me. Stinx they aren't workin for ya
I basically posted this for someone on IRC so they could get the apk easily. Maybe it's only functional for AOSP roms... dunno
Click to expand...
Click to collapse
shoot, i knew that. i posted before thinking.
im using the nfinite .6 odex. prolly need deodex'd rom...i dunno

I am on a fully deodexed rom (did it myself ) and seems to do what it says on the box however one thing... whats so multitouch about it? (ie. it doesnt seem so multitouch or maybe as usual I am not doing it right :X)

hexskrew said:
I am on a fully deodexed rom (did it myself ) and seems to do what it says on the box however one thing... whats so multitouch about it? (ie. it doesnt seem so multitouch or maybe as usual I am not doing it right :X)
Click to expand...
Click to collapse
Use it like a normal computer keyboard ie: hold down the 'shift' key while you push another key to make it a capital, then release and keep typing - works great!

doesn't wanna install said file not installed
I'm using darchdroid2.7

eddie3130 said:
doesn't wanna install said file not installed
I'm using darchdroid2.7
Click to expand...
Click to collapse
You can't install it, you have to push it to system/app/ It work great on DD2.7

ItsDon said:
You can't install it, you have to push it to system/app/ It work great on DD2.7
Click to expand...
Click to collapse
that would explain why it disappears after i reboot using Damage Control ROM.

can someone post a screen shot of how this keyboard looks? will this work with fresh 2.1.1. i am using the AOSP black keyboard right now along with AOSP messaging app and they both work great. someone please post a screenie! thanks.

is there still a space bar bug in this

when I do rm qime.apk I get Read-only file system. Not sure why. First time I ever had an issue loading anything.

Williamh85 said:
when I do rm qime.apk I get Read-only file system. Not sure why. First time I ever had an issue loading anything.
Click to expand...
Click to collapse
use RootExplorer (find an apk) and use that..its better/easier than using a terminal emulator, plus, u dont need to remember/copy all those commands

does this keyboard have the spacebar bug where it only responds to the top of the button

Gingerbread Keyboard for GS?

I would LOVE this keyboard for my G1. I am going to give porting it a shot, but I'm inexperienced, so I was wondering if anyone else is giving it a go. Leave a comment if you're already doing this, or if you have tips for me. Thanks!

first take it from the hero rom so you don't need to convert hdpi to mdpi

DONE.
http://forum.xda-developers.com/showpost.php?p=9644516&postcount=4820
It sucks IMO.

Ohsaka said:
DONE.
http://forum.xda-developers.com/showpost.php?p=9644516&postcount=4820
It sucks IMO.
Click to expand...
Click to collapse
answer your pm

failed
Guys i have tried this from the veryfirst point i saw this in androidspin.com and thru the theunlockr.com but i failed to port this keyboard onto my rooted G1 specification in my signature....
It was saying some file is missing while i tried to flash it from recovery sorry i didnt make a note of it...
if anyone got the sucess please share the process thanks...

Ohsaka said:
DONE.
http://forum.xda-developers.com/showpost.php?p=9644516&postcount=4820
It sucks IMO.
Click to expand...
Click to collapse
so does this work?

Download the updater
Flash it
Reboot
2.3 keyboard is there and its ugly...

Ohsaka said:
Download the updater
Flash it
Reboot
2.3 keyboard is there and its ugly...
Click to expand...
Click to collapse
it force closes

bestofrhcp said:
it force closes
Click to expand...
Click to collapse
Well it doesnt for me.
Perhaps a logcat? Do you have Swype installed? Any other keyboard modifications already installed?
This file replaces "libjni_latinime.so" in /system/lib
and
"LatinIME.apk" in /system/app
Thats it.
Original file source: tnpapadakos

Ohsaka said:
Well it doesnt for me.
Perhaps a logcat? Do you have Swype installed? Any other keyboard modifications already installed?
This file replaces "libjni_latinime.so" in /system/lib
and
"LatinIME.apk" in /system/app
Thats it.
Original file source: tnpapadakos
Click to expand...
Click to collapse
yeah i remember the same file is missing in my case...LatinIME.apk

The port requires Android 2.2 Froyo.
Works on CM6.1. Installed on G1 and on 32A Magic. Just use the one referenced by Ohsaka.
I think it's better than Froyo stock keyboard. I switch sometimes, so this is good.

xaueious said:
The port requires Android 2.2 Froyo.
Works on CM6.1. Installed on G1 and on 32A Magic. Just use the one referenced by Ohsaka.
I think it's better than Froyo stock keyboard. I switch sometimes, so this is good.
Click to expand...
Click to collapse
using on tmo ota froyo doesnt work.. i got froyo but keyboard FC's

in the next MIUIcy update you will find

take it from my sig. just flash it via recovery.
delsadj:
i wouldnt recommend. somehow a tiny bit laggy.

if you get an error when flashing via recovery do this:
-extract zip
-put .apk in system/app/
-put .so in the lib folder (exact directory found in the zip)
-reboot
-fix_permissions
-enjoy
i have it on mt3g port and i t is now my standart it detects keypresses way more accurate than stock 2.2
Sent from my T-Mobile myTouch 3G using XDA App

nah i dont have swype and i tried through recovery, as if normal but then it FCs
how do you get the logcat? sorry for the noobish quesion

I miss the dedicated .com/net/org button

[INFO] Perma-Temp root that sticks!

info below pasted from source:
http://forum.androidspin.com/showth...e-Dissappearing-SU-Binary..?p=22493#post22493
Thanks goes to #TeamWin for Temp Root!!!
Everyone knows that currently with any temp root, you still lose links to the SU Binary & Busybox links, it's just a matter of time before it happens!!
So after digging around somewhat I found an over sight that HTC might use later for system updates via /vendor/bin, who knows at this point though... Anyways, after amount of time the SU Binary along with busybox links if be in system/bin or /system/xbin gets deleted / removed..
Now, what I did was enable the $Path to /vendor/bin which is in the Sensation export PATH..
Any Calls made from this point either be SU or Busybox don't get deleted nor touched from any App requesting the SU Binary!! I've tested this with alot of apps & the Root sticks in place..
Other than Reboot, it might as well be a Perma-Temp-Root!!
This is For Windows only, if you wish to make it work for linux or mac help your self...
If you have trouble with the Superuser.apk, uninstall first & reboot then run the .bat file again..
What is installed?
Busybox w/ symlinks
Superuser.apk
SU Binary
Fre3vo
sqlite3
What's Removed?
slackerradio.apk
TMOUS_Navigator.apk
Transfer-pyramid-8.30.0.26-S30.apk
Protips.apk
IdleScreen_Stock.apk
HtcTipWidget.apk
com.htc.TrendsWidget.apk
com.mobitv.client.tmobiletvhd.apk
FusionStockWidget.apk
Stock.apk
So without further ado, the link!
http://www.multiupload.com/LBEYIFVD58
Once Downloaded, Unzip & double click on the Run_ME_fre3vo_Root.bat File & Enjoy long lasting Root!
Last edited by Eugene373; Today at 12:51 AM.

Used and it works like a charm..

Thanks! It works nicely.

Eugene is a great dev...I hope like hell he has less trouble from people in the Sensation group then he had in the Vibrant forums.

Awesome ! Thank you ! Will try in the AM

Great job posting this. I'll definately try this on my sensation. Post this in the evo 3d section as well.

Man freedom might come even sooner now that eugene might be working on it maybe teamwin and eugene should help each other get s-off alot faster that would be awesome!

Works great. I originally grabbed it when he posted on twitter. I actually forgot to remove SU prior to trying the first time and it failed, but after removing SU it worked like a charm.

so i was gettign issues, but i will try to run without su installed

still getting errors mounting and such

RANDYRKELLY said:
still getting errors mounting and such
Click to expand...
Click to collapse
Reboot your Phone before Running. worse case, do a Factory reset to clean out the old temp root files.

Great finding! And working perfect! Thanks a million!

vlad48 said:
Great finding! And working perfect! Thanks a million!
Click to expand...
Click to collapse
more than welcome.

eugene373 said:
Reboot your Phone before Running. worse case, do a Factory reset to clean out the old temp root files.
Click to expand...
Click to collapse
silly me i forgot i had to temp root first. noob moment carry on haha. gots to be more careful. everything works now, nomore bs apps woot. I recommend the op say something about needing to be temp rooted first. slow people like me forgets. Also will this stick after boot? I know may be a dumb question but hay better safe then sorry

eugene373 said:
more than welcome.
Click to expand...
Click to collapse
Really great job, going to try this tomorrow and report any problems I encounter if any. Thanks!
Sent from my HTC Sensation 4G using Tapatalk

RANDYRKELLY said:
silly me i forgot i had to temp root first. noob moment carry on haha. gots to be more careful. everything works now, nomore bs apps woot. I recommend the op say something about needing to be temp rooted first. slow people like me forgets. Also will this stick after boot? I know may be a dumb question but hay better safe then sorry
Click to expand...
Click to collapse
No it's still a Temp Root, It just works unlike the others... I would be happy to see other put the Fix into there scripts though....
but yeah, a Reboot is a Must before running..
~Eugene

eugene373 said:
No it's still a Temp Root, It just works unlike the others... I would be happy to see other put the Fix into there scripts though....
but yeah, a Reboot is a Must before running..
~Eugene
Click to expand...
Click to collapse
awww ok so tell me this have u gotten root apps to work?

RANDYRKELLY said:
awww ok so tell me this have u gotten root apps to work?
Click to expand...
Click to collapse
all my Root apps work...

I know this is a sensation forum, but it seems like most of these root methods are interchangeable between the EVO 3d and Sensation. Will this work on the Evo 3d, or would something need to be modified? Thanks for all the work.
Sent from my PG86100 using XDA App

k2buckley said:
I know this is a sensation forum, but it seems like most of these root methods are interchangeable between the EVO 3d and Sensation. Will this work on the Evo 3d, or would something need to be modified? Thanks for all the work.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
If you have an evo 3d...
adb shell ( enter )
echo $PATH ( enter )
if vendor/bin is in the output path, then yes this will work on the evo 3d, if not... then no it wont work.