I have installed the Touch X LEO Turbo.cab and I am not sure about it. Meaning, is it supposed to be listed as a program under your Start icon where you can select changes after running the Turbo program, or do you install it, and it runs in the background, automatically, with no options to change the settings! I have searched everywhere, and cant find an answer. I guess I am missing something!!
iarapilot said:
I have installed the Touch X LEO Turbo.cab and I am not sure about it. Meaning, is it supposed to be listed as a program under your Start icon where you can select changes after running the Turbo program, or do you install it, and it runs in the background, automatically, with no options to change the settings! I have searched everywhere, and cant find an answer. I guess I am missing something!!
Click to expand...
Click to collapse
All it does it change some registry settings. Read what it says next to the CAB.
Thanks. The description seemed a little vague for me!
i had it,but i've uninstall it because i prefer the tweak of BsB tweak
the cache is better on dynamic type.
nic85 said:
i had it,but i've uninstall it because i prefer the tweak of BsB tweak
the cache is better on dynamic type.
Click to expand...
Click to collapse
Is basically the same thing, you can play around from Advanced Configuration Tool. The drawback so far is the way it affects facebook integration in manila, apparently you can.t view your friends albums from manila when this tweak is enabled.
Related
Hi,
HTC removed many of the original animations when switching between tabs because they slowed things down too much.
Here is a demonstration of them:
http://www.youtube.com/watch?v=xDPjXx5fZ9U
You can get them back by installing this early Diamond Manila:
http://rs229tl2.rapidshare.com/files/140844219/1523205/Diamond_manila_by_Swtos.cab
It works fine on my Touch Pro with tweaks installed, but it does slow things down a bit. I guess you need to decide whether having fancy animations is worth losing a bit of speed. Choice is yours!
Rowan
I don't see any differences from mine
Move from one tab to another using sideways gestures...
Can this cab file be easily removed if need be?
I get an error saying I dont have permissions to install
canthonyza said:
I get an error saying I dont have permissions to install
Click to expand...
Click to collapse
True... wat now?
Kurdminator said:
True... wat now?
Click to expand...
Click to collapse
The installation begins, it gets about 80% of the way and then I get the following error :
"Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Same here.
I didn't try, but maybe you have to disable touch flo 3d before install this application..
Yep had to disable tf3d before installing. also installed it to my card but dont think that makes any odds. Uninstalled about 5 minutes later due to the incredible slowness..
Just realised this is my first post. Hello everybody *waves*
Where do I disable it?
go to start / settings then go into today, then the items tab and untick TouchFLO 3D and then OK it.
Animations are the same
This is not offering any improvement on the TP.
All options maintain the same.
If you even install this and you reinstall the old animations the stability of your phone will decrease.
In order to update my weather database for example.
After the update i'm not able to find any SQL database related to the cities to add any new city that is not installed as a standard.
*Touchflo will not have all similair settings from the original rom when this is/was installed.*
For example :
My gf has a diamond and i have tried to install the weather database editor and tried to change my registry similair to the one of the diamond but i'm not able to change it back as it was. * Before i installed the tweak, the tool worked !*
I'm going to hard reset my TP and will not install this again. Too bad though, because it looked like something useful on youtube eventhough that everything almost maintained the same, but this is not really handy the uninstall because it wasted more that I hoped for.
I thought I saw something the other day about using the track wheel to scroll through contacts and other things. I cant find it now. Can somene tell me how to do this?
I'm also interested in this
Search for Diamond Tweak, install and it's in the options.
Advanced Config 3.3 has this option too.
where in advanced 3.3?? i dont see it?
also with diamond tweak, I cant find the actual program. I found the thread, but it just shows a bunch of reg edits, i dont see the actual file, like advanced config.
can you point me in the right direction.
PhilPan said:
where in advanced 3.3?? i dont see it?
also with diamond tweak, I cant find the actual program. I found the thread, but it just shows a bunch of reg edits, i dont see the actual file, like advanced config.
can you point me in the right direction.
Click to expand...
Click to collapse
You can go to my 4shared folder and under customization & tweaks you can find it there. http://hchavarria.4shared.com
Diamond Tweaks
http://montecristoff.webs.com/
http://forum.xda-developers.com/showthread.php?t=409540
Scrolling works in contacts and PIE, but for some reason it isn't working on my fuze in file explorer, not sure why.
Advanced Config - it is under the "Menu" softkey>More items>SmartTouch
I just wish it would work in Outlook, I can't understand why it dosen't as it's fine when you're trying to move a mail in Outlook
cparkhorn said:
http://montecristoff.webs.com/
http://forum.xda-developers.com/showthread.php?t=409540
Scrolling works in contacts and PIE, but for some reason it isn't working on my fuze in file explorer, not sure why.
Click to expand...
Click to collapse
in my TP works
so uh, i just flashed the new ROMeOS2 to my fuze......i installed a few things, namely the updated "video drivers" to give me a better frame rate w/ the hologram. The advanced settings program and the diamond tweak and TF3D config programs
anyhoo....after installing the video drivers and changing a few settings in advanced settings and diamond tweak, my start menu is now garbled/fuzz.
if i press where i think a link would be it becomes clear and you can see the quicklaunch/programs/settings/etc etc.
i tried deleting advanced config and diamond tweak to see if that would help w/ the issue to no avail.
help is extremely appreciated
damn, no ideas at all?
ive also had some issues with landscape mode and text not showing up ANYWHERE
are these custom roms just that problematic or did i do soemthing wrong?
whitesox311 said:
so uh, i just flashed the new ROMeOS2 to my fuze......i installed a few things, namely the updated "video drivers" to give me a better frame rate w/ the hologram. The advanced settings program and the diamond tweak and TF3D config programs
anyhoo....after installing the video drivers and changing a few settings in advanced settings and diamond tweak, my start menu is now garbled/fuzz.
if i press where i think a link would be it becomes clear and you can see the quicklaunch/programs/settings/etc etc.
i tried deleting advanced config and diamond tweak to see if that would help w/ the issue to no avail.
help is extremely appreciated
Click to expand...
Click to collapse
You have to go into advanced config 3.3 and click on User Interface then change Animate menus from yes to no (disabled), save and soft reset. After re-boot your start menu should operate properly.
HAAALP?
californiarailroader said:
HAAALP?
Click to expand...
Click to collapse
It's a White Sox thing - they don't speak very good English down there.
climber1872000 said:
You have to go into advanced config 3.3 and click on User Interface then change Animate menus from yes to no (disabled), save and soft reset. After re-boot your start menu should operate properly.
Click to expand...
Click to collapse
THANK YOU THANK YOU !!
yaw on the souf side we dont speak enrish goodly
whitesox311 said:
THANK YOU THANK YOU !!
yaw on the souf side we dont speak enrish goodly
Click to expand...
Click to collapse
No problem. I was a bit noobish at once...hell I still am.
emesbe said:
It's a White Sox thing - they don't speak very good English down there.
Click to expand...
Click to collapse
Lol Oh, okay
Hi There,
is there already a proggy that auto changes my background every x hours? Or does the old Diamond Background Changer still work?
And what about an action screen like fabliv's 9 button for diamond1?
They both work.
fBx said:
They both work.
Click to expand...
Click to collapse
wath is the name of that prog that works on Diamond 2
THNX
It's kevin2u Diamond Background Changer and Fabliv's Action Screen. Just search the board for "diamond background changer" and "diamond action screen" and you will get there.
And what about background for all tabs? I have tried Showaco´s but doesn´t work properly on wvga (the picture does not cover all the screen and does not eliminate default background either). Munrus´s for HD doesn´t work either, although it correctly replace all backgrounds it freezes the start menu. Is there any working cab for the topaz yet?
There is some windows program which creates a .cab that installs a selected image file to all tabs, I believe it also came from the HD. But that's not really a good solution, as you can't just select the background on the phone and then display it on all tabs, you need to create a cab and install it.
fBx said:
There is some windows program which creates a .cab that installs a selected image file to all tabs, I believe it also came from the HD. But that's not really a good solution, as you can't just select the background on the phone and then display it on all tabs, you need to create a cab and install it.
Click to expand...
Click to collapse
Thanks for your answer. It is not exactly what I was looking for. It seems that we Topaz owners have to wait a little more for applications and ROMs. Patience then.
Please check this... http://forum.xda-developers.com/showthread.php?t=517904
as far as i tried the action screen doesn't work... Installing went fine, but it did not start correctly. At the home screen there appeared an option 'action' in the bottom left corner, but opening it just directed me to the contacts, not the screeen i was used to on the diamond 1
jibotella said:
Thanks for your answer. It is not exactly what I was looking for. It seems that we Topaz owners have to wait a little more for applications and ROMs. Patience then.
Click to expand...
Click to collapse
Solved! See wallpaper thread.
Hey all,
I am currently using the energy rom with TF3D2..
I'm not to good at alterations to the phone and tweaks etc. but i am wondering.. on the home screen where the clock is.. the softkeys are LEFT: Contacts RIGHT: Comm Mgr.
Now my question is.. am i able to change the Comm Mgr. one (as i never use it) to say an action screen that i've installed? I have tried numerous things and they dont seem to work. On the original Touch Flo i knew how to do it but as i said, i cant figure out how to do it on the new one..
Any help would be much appreciated!
jayt2008 said:
Hey all,
I am currently using the energy rom with TF3D2..
I'm not to good at alterations to the phone and tweaks etc. but i am wondering.. on the home screen where the clock is.. the softkeys are LEFT: Contacts RIGHT: Comm Mgr.
Now my question is.. am i able to change the Comm Mgr. one (as i never use it) to say an action screen that i've installed? I have tried numerous things and they dont seem to work. On the original Touch Flo i knew how to do it but as i said, i cant figure out how to do it on the new one..
Any help would be much appreciated!
Click to expand...
Click to collapse
Have you used advanced config?
I cant seem to find settings for that anywhere in advanced config?
I have cahnged it using softkey manager that came with the rom but it still doesnt work?
jayt2008 said:
I cant seem to find settings for that anywhere in advanced config?
I have cahnged it using softkey manager that came with the rom but it still doesnt work?
Click to expand...
Click to collapse
My bad. Thats a ROMeOS exclusive thing .
Sounds like you are using WM6.5.
The CHome homescreen takes over the softkey assignments the same way TouchFlo3D does. In order to change the Left and Right Softkey, you'll have to make the change manually in the registry or from a CHome Titanium Customizer.
The registry setting is easy if you know the link url to the file you want
Go to HKLM\Software\Microsoft\CHome\CClock\
Find the Strings "SK2TEXT" and "SK2URL". The SK2TEXT is the name the button will display, and the URL is the link.
If you're wondering, in the main CHome Key (folder) you'll find the SK1TEXT and SK1URL which is the Left SoftKey; although I would leave contacts up there.
he said hes using tf3d2. he didnt say he was using chome.
Thanks for that! I found it in the registry.. the only thing is.. how do i create a URL for the program that i want to run when i click that softkey?
player911 said:
Sounds like you are using WM6.5.
The CHome homescreen takes over the softkey assignments the same way TouchFlo3D does. In order to change the Left and Right Softkey, you'll have to make the change manually in the registry or from a CHome Titanium Customizer.
The registry setting is easy if you know the link url to the file you want
Go to HKLM\Software\Microsoft\CHome\CClock\
Find the Strings "SK2TEXT" and "SK2URL". The SK2TEXT is the name the button will display, and the URL is the link.
If you're wondering, in the main CHome Key (folder) you'll find the SK1TEXT and SK1URL which is the Left SoftKey; although I would leave contacts up there.
Click to expand...
Click to collapse
I have solved it and changed the key. Thank you all for the help!