I am using an application made by schap for doing some voip..
I am using a voipbuster account. I set the internet calling ok and it connects when i set it to connect but when i do a call appearsa globe telling me that it is not possible to do a call what did i wrong?
this are my settings
gimme sum light guys!
THANKS!
try to call with prefix "00" intead of "+".... it's caused by a ipdialplan.xml.
btw. I have problem after I made a call... there is one way sound, I don't hear anything, other side is all right... any solution?
zoky said:
try to call with prefix "00" intead of "+".... it's caused by a ipdialplan.xml.
btw. I have problem after I made a call... there is one way sound, I don't hear anything, other side is all right... any solution?
Click to expand...
Click to collapse
yeah...i don0t get sound on my prophet... but i got heard very well in the other side...
Ok, I have tried using prefix 00 and I get
"Cannot complete the call. The signal may be unavailable orthe phone number may not be valid. Verify the number or try again."
WI-Fi Signal is OK (Can surf on IE perfectly) and the prefix is ok also (tried with + and 00 btw).
Any ideas?
cesardeluxe and zoky:
that's a common problem with SIP. You probably behind a router with firewall. In common situation problem will be solved with NAT setup on router and port range setup on sip client. I have NAT configured but since wm6 sip client do not allow us to define the same port ranging as [email protected] (as far as I know), we will have allways this problem.
I'm also searching on this. At this moment I can only make calls (with correct 2 way sound) inside my network (we have our own asterisk box inside network). By the way, the quality is not the best, so I think I'll not loose too much more time with this but before quit I'll try to install some other sip client to work with (if I found some) one of these days.
Regards.
same
same problem here. i can receive calls perfectly wich should be the most dificul part, but when trying to call i get that message too..
help please
Hmmm...is this possible with XDAIIi? I have XDAII but my friend has XDAIIi and he might sell it to me cheap if I can reflash and upgrade the rom and make it working again.
I am using Onesuite.com voip and was very happy with their service. I was able to use an ATA device with it but took me awhile before I figured it out. If I can use it over a PDA/cellphone then it will be perfect.
Now is it possible for XDAIIi to make voip calls? What software or programs do I need to install to be able to use my Onesuite voip? Hopefully someone can give me some instructions.
Thanks.
Let me just bump this one.
Anyone can help me find answers on how to use voip on XDAII. I am using Onesuite voip service, it works on SJphones, X-lite's and even ATA device and IP phones. I just don't know for XDA's.
zxt said:
Let me just bump this one.
Anyone can help me find answers on how to use voip on XDAII. I am using Onesuite voip service, it works on SJphones, X-lite's and even ATA device and IP phones. I just don't know for XDA's.
Click to expand...
Click to collapse
Search for Express Talk. I am using it on my Onesuite account and it works. Just search for it on Google.
Anyone using Fring here? I'm having problems setting it up with Onesuite but based on their website (fring.com) its compatible with any SIP based voip like Onesuite.
Has anyone here used the built in (WM6) VOIP successfully on their Wizard?
I am not asking if you have gotten it to work (I have already done that). I am asking if there is people who use it daily to make/receive phone calls.
I found that my wizard would loose connection to the voip server, not ring on incoming calls from the voip server, etc.
if so, what service are you using (or connecting to asterisk)?
thanks
Hi All,
I've read and followed all the directions for adding Internet Calling support to my HTC TyTN II with Windows Mobile 6.
So far, no joy. Vonage doesn't appear to let my phone connect over WiFi.
Has anyone had any luck recently getting this to work? I would appreciate any help available.
In addition, I tried using Fring. It will accept incoming calls, but outgoing calls constantly fail to actually work, with no errors in Fring.
Thank in advance,
Anthony
Hello!
I've been trying to use wm6 Voip software, and everything works ok until the person I¨m calling answers the phone. Then the call ends/drops.
I'm guessing its something to need to be configured in the ipdialplan.xml file, but I just can't figure out what
If i use fring everything works ok, but because fring doesn't work with my bluetooth headset, I'd need to make wm voip client work.
Any help will be appreciated.
testing a little more I found out that the problem is somehow in the incoming call settings.
I am trying with 2 HTC tytns. If I call from wm voip client to the other wm voip client the call ends as soon as the other end press accept, but if I call from the same wm client to fring then the call comes in with no problem, and it's like this both ways, meaning in both tytns.
Could somebody point me in the right direction to get calls from wm voip to wm voip client working please.
I have a TP2 with the 6/20 version of MightyRom.
I wanted to get voip working on my phone... but on an as needed basis - for when I am traveling. My voip account that I am using is with Onesuite.
First I installed the following two cabs:
WM6VoIPFull.cab
Setup_VoIP_v0.3.cab
But as it wasn't working well I uninstalled them and installed Fring. Fring works.
Since I do not want it running all the time I removed the Fring link from the Startup folder and have soft reset my phone multiple times since.
Without fring running, my onesuite incoming calls are still being routed to my cell phone which I do not want. And even though they are being routed, the calls still do not work.
I want to prevent the incoming voip calls from coming to my phone when Fring is not running.
Now I think I know what the issue is, yet still need help resolving it. Even though I uninstalled the first two cabs. SIP Config tool and SIP Dialplan still appear in my programs so apparently it has not uninstalled or uninstalled clean.
Turn the IP Call button off. I uninstalled the cabs as well but it didnt do much. Probably something in the registry.
I got the Sip softphone on the TP2 to work, it connects i can hear the other person but my mic doesnt work. So Im still stuck using the free softphone can download from windows marketplace.
How about using another softphone like PortGo on your WM? I also use Onesuite VoIP and when I still have my HTC Touch, I use PortGo and it works well. If PortGo isn't running then I won't get my Onesuite calls on my mobile phone.