Related
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
i was needing this help so much, please help me guys, i tested my chip on another mobile and worked the edge
Be sure to flash Hard SPL before you do anything!!!!!
After you do that, you can go ahead and flash.
If I were you, I'd flash a different radio to see if it works better, I recommend .28, .32, and the .19 test.
If that doesn't work then let us know.
basmareck said:
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
Click to expand...
Click to collapse
I cannot say if your radio is the problem. If you're installing an official HTC or provider ROM, you do not need HardSPL. If you want to install a cooked one here off XDA, you do. This great guide will help you flash a cooked ROM and/or radio: http://forum.xda-developers.com/showthread.php?t=448008
You're right, if you flash a radio, then you will not lose anything in your Storage Memory. If you flash a ROM, you will, so be sure to back up your PIM. PPCPimBackup does a great job for that, you can find it at d0ugie's site: http://blownfuze.org/ Your contacts and calendar should come back right away after the restore, but the messages take a while to rebuild, so don't touch it for at least 15 mins after the reboot.
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
basmareck said:
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
Click to expand...
Click to collapse
By default, you cannot flash anything but an HTC or provider ROM; you cannot flash radios either. You have to flash HardSPL before you flash a custom ROM or a radio.
Have you tried running SSPLManual.exe as outlined in the guide above, step 2 note 2?
My fuze is freezing after a soft reset, and the only solution I have found is to hard reset.
I recently flashed hard-spl and my first cooked ROM. A few days later this happened. It freezes just after the animation sequence. I hard reset the phone, set it all up again, couple days later - frozen again. Tried a different ROM, loaded fine, set it all up, couple days later - frozen. Tried a 3rd ROM, same thing.
I was running the stock at&t fuze ROM up until this with no issues. I have tried 2 different versions of the Energy ROM 2.0 and once with Shep's 6.5 ROM.
I'm getting pretty sick of setting this thing up. Any ideas, maybe a bad hard-spl flash?
I had the same problem before, i fixed it with flashing back stock rom, reflash hard-spl and trying a diffrent build of my favorite rom, and to be honest i have no idea what fixed it.
Ok thanks for the reply. I am going to try a reflash of the hard spl, and a new ROM. Something makes me think the hard spl is the problem, but a new ROM can't hurt at this point. I will post my results...... in a few days. Thanks again!
Having almost the same problem. Where exactly was it stopping?
I get the first splash-screen, afterward in the lower right corner the 3 red version numbers appear and nothing happens, i dont get to the second (animated) splashscreen, nor to the windows mobile one.
More info:
Stock Rom
--> flashed HardSPL
--> flashed PdaViet V11
--> months later V15
--> weeks later WM 6.5 Testrom, disappointed --> flashed ProvenRom 3.3
--> trouble began approx. 3 days later
--> reflashed ProvenRom 3.3
--> trouble started again, then i did a hard reset for the first time
i will try reflashing stock rom, then hardspl, than custom rom and report in a couple of days
same thing happened to my htc touch pro. i havent fixed it yet
Happened again. I had reflashed the hard-spl and then a new version of the energyROM. It froze up later that night. Iam getting the first splash, with the red numbers, romversion etc., then the animation plays, the it freezes at the end of it. I guess I will try to flash back to stock ROM and see what happens. Until someone has a fix, I guess it'll be trial and error. I'll keep you posted.
And again, twice.
I thought everything was fine, workin good for a couple of days, then it froze again. Any thoughts or further suggestions would be highly appreciated.
Seems like it happens while I am setting things up, phone starts to get laggy after a soft reset, after adding a cab that requires a soft reset. Then it freezes on the next reset.
Software Version
I think we should narrow this down by comparing the software versions.
I'll start:
Radio: 1.14.25.05
Rom: Proven 3.2, 5.07.831.17 build 5.2.21042.1.6.1
HardSPL by Olinex
now you go!
addition:
i also remember, this happened after a cab-install. Do you remember WHAT you actually tried to install? I think for me it was HomeScreenPlusPlus UI. Afterwards it was always Opera that stopped responding and i had to soft-reset --> total failure
I had the exact same problem...you can see it in the DaG 6.5 Kitchen thread. I tried flashing to a known custom Rom that I know worked and it still had the same issue. I fixed it with the advice of someone there, the same advice that's here. Flash a stock rom, hard reset....then flash a custom rom. I don't know why that fixed it but it did.
Hmmm, maybe this will work. I had tried that and it did seem to work. However, after a few days I got sick of the 6.5 and flashed back to the energyROM. So I will give this fix another shot.
In regards to the previous post here's what I am running:
radio: 1.12.25.19
Rom: EnergyROM 2.0 build 41609
Hard SPL - SPL-1.90.by Olinex
Its almost becoming funny now. I did a soft reset so I could see the radio version and guess what - it froze again.
It seems like if I don't set everything up, it will last a few days, but sooner or later I get fed up with not having progs installed etc. and after I set it up - poof!
So here is a list of cabs and general things i do to setup the phone.
Hard reset - reset at screen setup - ROM intitial setup - device reboots itself-
-PPCPIMBackup (installed on ROM, just restore contacts)
-ChangeScreen or Gyrator / have tried both individually, not at the same time
-DredSensor
-KforTouchPro
-HTCWeathermaster Rhodium
-Gscroll 2.0 (beta)
maybe something else I haven't installed every time
of course, set owner name, setup e-mail, the rhodium world clock bug setup, general tf3d setup (contacts, weather, tabs etc.)
Add shortcuts from my sd card for previously installed progs.
I'm not sure that any of these are the issue. I have done this at least ten times. Each time I have noticed which was the last cab installed then freeze, I try not to install that cab, then it will still freeze, eventually.
I am going to reflash the stock ROM and stock SPL, then hard SPL and a ROM flash. I'll be sure to post my results.
i tried latest mystic 6.5 rom lite beta 1.1 and it froze within a day at the second splash screen and after about 1-2 min the screen turned white. I have tried the battery removing trick, but same results. I'm not sure what apps i have installed after hard reset...
i tried latest romeos rom 6.1 randium edition: it got frozen after some time...
same with both NRGZ roms: 1 and 2 version (standard raphael manila and rhodium manila).
Now i'm using romeos wm6.5 rom 2.101... will post if it freezes...
i havent tried this: "reflash the stock ROM and stock SPL, then hard SPL and a ROM flash" yet...
at10ti0n said:
Now i'm using romeos wm6.5 rom 2.101... will post if it freezes...
i havent tried this: "reflash the stock ROM and stock SPL, then hard SPL and a ROM flash" yet...
Click to expand...
Click to collapse
I had no luck with this solution, and it is not exactly what was described.
Actually the solution posted is to just flash stock rom, hard reset, then flash custom rom.
I tried the above solution and it still froze, now I am going to try the correct solution posted and see what happens.
Frozen again... I am going to flash back to stock rom, stock spl, see if it still freezes.
This works (for me)
Running fine for a week:
- Flashed stock ROM (O2 German). This replaces the radio and the OS
- Went back to stock SPL. THIS IS TRICKY, SO READ(!):
+ Olinex HardSPL will NOT let you flash back to your StockSPL, because it is write-protected. This kept me up quite some time.
+ Flash your Stock ROM
+ Then, flash the hacked 195 SPL mentioned HERE: http://forum.xda-developers.com/showthread.php?t=502720
+ then, flash your Stock SPL. Read the Threads: http://forum.xda-developers.com/showthread.php?t=410150
+ Make sure, your SPL is neither Olinex, nor the hacked 195 in the third picture
+ I flashed the Stock ROM again just to be sure the stock SPL runs and allows your stock ROM to run.
- Flashed HardSPL
- Flashed Energy ROM 2.0 WITHOUT Manila, flashed latest Radio, installed cabbed Rilphone.dll
Installed Resco, Resco Today, MortPlayer - this is the SAME setup that got me caught the last time and now runs fine for a week.
This works for me. I presume some ppl get the stock SPL flashing wrong.
As i can read from other roms, it happens ONLY to Roms with the new rhodium manila,
so maybe, if you're tired of reflashing and hard reset, try one without the new manila interface.
Another suggestion: I have a different Opera now. Many describe they tried to start Opera, THEN it hangs and the phone gets stuck on bootscreen. I have 9.5 Build 15613 now and this one runs fine.
I encourage you to try energy ROM 2.0 without Manila. There seems to be a battery issue and someone uploaded a version with better battery life, you may try this, but i don't find the post anymore and this may have rhodium manila included. Energy ROM 3.0 is out now netherless, maybe someone can follow my instructions and try this with 3.0.
Hope i could help, this was bugging me SO LONG
Wow, thanks!
I have been running the stock at&t rom since my last post with no freezing. I will try this step for step, and I will try energyrom 3.0 just to let you know.
Wish me luck!
Well, I was able to get the stock SPL back, just as you described. Thanks again for the info.
However, I flashed EnergyROM3.0 and it froze after a few hours. Of course that rom has the rhodium manila cooked in, so I am going to try again with another rom. I will report back later.
from my last post i have been using romeos wm6.5 v2.101 with no freezing.. it has NO manila cooked in.
I think, maybe it has something to do with manila :-?
Same problems here as described. Using:
1.14.25.05 Radio
EnergyROM 3.0 WM6.5 50409a version
Started after flashing the WM6.5, reproduced easily after 1-2 hr of ROM on phone, it freezes (either by installing something, or Manila general use) then stays on information screen of versions.
Going to try stock ROM + reflash SPL then flash EnergyROM 3.0 again. If that wont work, i go back to 2.0 which worked well.
OK guys I am going to report this issue has been fixed (though not solved) for me.
I flashed ROMeOS wm6.5 v2101 and am also running the version of opera previously posted. I have been running for almost a week with no freezing, and (knock on wood) do not expect it to.
I am very happy with this rom and don't plan on flashing again for a while. However, if I do I will report any success/failure. I am curious to know if the problem is just certain roms, or something specific in them. If anyone else having these issues would care to post their results with other roms, it would be appreciated for the sake of the community.
I also wanted to note that I flashed the RRE wm6.5 non-manila version just before this and it did freeze on me. So it may not be related to the rhodium manila.
Anyways thanks again to all who posted and helped with this. I can't tell you how happy I am to have stable phone again!
Good luck and happy flashing!
same thing happened to my htc touch pro. i havent fixed it yet
Hi,
I followed this guide for rooting and JF'ing my G1: http://www.androidandme.com/2009/05...r-rooting-your-android-g1-to-install-cupcake/
Everything worked fine but I cannot for the life of me get the radio to update.
It's stuck on Baseband: 62.33.20.08H_1.22.12.29
I downloaded the HTC radio update, renamed it to update.zip and followed to install procedure (home+power, alt-s).
I have tried wiping the phone beforehand etc. as well, but doesn't seem to make a difference.
It does not show any errors or anything, and seems to complete successfully, but the baseband never gets updated.
Is there something else I can try?
Thanks
If I were you, my next step would be to reflash jf.
Also, did you install the new radio update before jf 1.5? I heard that was the right way to do it.
I've tried reflashing to 1.0, reflashing radio back to original, then updating radio, updating OS - radio version still stuck on the same :/
is the official radio update signed with testkeys or "official" key?
i got my update package from haykuro's site and it worked fine.
you could also try reflashing the recovery image as suggested in the steps to get root, then update the radio image again. also remember to press home+back and wait till the phone reboots itself.
What's the radio package you're using? (Link/filename)
If it's not http://sapphire-port-dream.googlecode.com/files/ota-radio-2_22_19_26I.zip, then it's the wrong one.
>>If it's not http://sapphire-port-dream.googlecod..._22_19_26I.zip, then it's the wrong one.
This is the radio package I'm using.
>>you could also try reflashing the recovery image as suggested in the steps >>to get root, then update the radio image again. also remember to press >>home+back and wait till the phone reboots itself.
Have reflashed back to original firmware (removing root and hardspl), then tried RC7->RC8 upgrade (radio is not updated) and then OTA update to Android 1.5.. again the radio isn't updated.
I have also tried keeping the phone rooted, and manually updating to stock android 1.5.. again radio isn't updated..
I'm all out of ideas?!
It's starting to sound like you've got a bad EEPROM to me. Does it go through all the normal steps? It should unpack the update, prompt you for a reboot, show a pic of a chip with an arrow pointing to it, and finally reboot again. No errors reported?
Hi,
Thanks for your response.
You're right - it goes through the entire procedure 'successfully,' i.e. it reports no errors and prompts for reboot, then does another reboot cycle after the 'unpacking' logo.
Just for everyones benefit:
Got the handset replaced - must have been a bad EEPROM as mikedmayer suggested.
I'm glad you were able to do that. What did you tell T-mobile? I can just imagine the blank look on the cust-serv's face when you try to tell them you think it's got a bad EEPROM because when you try to flash the radio it wouldn't take. Either that or them asking you why you're trying to flash your own radio.
Hey Guys,
First off this is a re-post, me old thread was closed, I am sorry for reopening but I am still having this issue. DaveShaw and smokestack76 had posted. Dave thank you for your reply but I have been through the noob flash guide and many many many other threads and it does not resolve my issue.
I'm not new to flashing and roms, I have flashed at least 100 times and have done some cooking. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed fine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
I have tried flashing spl from the sd and yes spl image was KAISIMG.nbh and KAISDIAG.nbh was on there as well. Card is formatted fat32. HardSPL would start, read the file and get stuck on loading.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever it is released, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
I have the stock 6.1 att rom up right now but I would like to resolve the issue.
__________________
finally finally got the patched version of 3.29 flashed. I will let you guys know how it goes from here. I am on a different computer at work.
Success!
I started from complete scratch and a fresh brain and was able to get everything going.
After I got the os back up i was able to start jumpspl and get it to connect via usb. Then only the force usb on 3.29 patch would work. After that repaired active sync and I was ready to go. Thanks smokestack79 for the late night help last night. I was out of it and frustrated. Seems like she's got a little more life in her after all.
Hi. I know this matter was discussed in the past but I wonder if somebody found out solution how to downgrade radio rom version. I installed v1.56.70.11 and my phone get jammed after 1-2 days. Even hard reset doesn't work (starting process freeze with Palm logo and installing bar at the end) and I always have to reinstall Windows - I've tried all version of Windows - 6.1 veisen, 6.5 base and 6.5 apps navenedrob. I've tried to flash many different (older) radios but after that v1.56.70.11 is still there. I've also tried to flash original windows ROM but it didn't affect radio rom.
Does anybody know any solution?
Thank you
Alfa