Greetings, it's my first post on Raphael's thread, i had bought second hand Touch Pro T7272, and start flashing hardSPL to get further action safe, but i forgot to try headset function, when i connect it and try to play a song, sounds was still generated by internal speaker, and then try on FM mode, still the same, i didn't hear anything from my headset. When i try headset on my Hermes, it working properly. I wonder was this any relation with hardSPL, or was there any hardware problem (cut-off track etc.), and one thing i also try to charge with USB, it's working.
Hoping some advices, thank You..
Need help here
Congrats and welcome to Raphael world! Have you tried flashing Radios?
Are you using bluetooth or wired headphones with the USB adapter?
Hello Sir u2pop and Sir ryotgz,
Thank You
I allready reflash it with stock ROM and nothing help, and finally i brought it to service center and found that I/O port was broken because of water, change it and horraaay it's working now.
Thanks a lot for Your attention Sir
erwinpiero said:
Hello Sir u2pop and Sir ryotgz,
Thank You
I allready reflash it with stock ROM and nothing help, and finally i brought it to service center and found that I/O port was broken because of water, change it and horraaay it's working now.
Thanks a lot for Your attention Sir
Click to expand...
Click to collapse
Glad you found the cause. Anyway where did you send your unit? I was told that Sistech Kharisma dont carry HTC brand anymore?
u2pop said:
Glad you found the cause. Anyway where did you send your unit? I was told that Sistech Kharisma dont carry HTC brand anymore?
Click to expand...
Click to collapse
Salam kenal Mas , yes i brought it to Sistech Kharisma, Plaza Semanggi branch, it's served there, i also bought jack converter, dopod 838 pro stylus and touch pro's battery and lower case. Means, yes they still covering HTC's.
Related
Hi,
I've downgraded from WM6 (Smart1 v2) to LvsW RUU_Prophet_220734_2207114_024721_NVID.
But now my sound doesn't work :'(
If I use my headset...I hear the sound..but without NOTHING!
Anybody else got this problem?
I did serveal flashes but no sound :-(
Probably your loudspeaker is dead.
I had the same problem, warranty.
But nothing about flash, it's a problem on many Prophet
xvx45 said:
Probably your loudspeaker is dead.
I had the same problem, warranty.
But nothing about flash, it's a problem on many Prophet
Click to expand...
Click to collapse
But I find it quiet strange... because it's just @ that point!
Could also just be the the headset jack. Happened to me on two prophets after using the headset. Usually it's a pin which got stuck after pulling out the headset.
GAMBIT999 said:
Could also just be the the headset jack. Happened to me on two prophets after using the headset. Usually it's a pin which got stuck after pulling out the headset.
Click to expand...
Click to collapse
But... Before I flashed it...it worked :S
GAMBIT999 said:
Could also just be the the headset jack. Happened to me on two prophets after using the headset. Usually it's a pin which got stuck after pulling out the headset.
Click to expand...
Click to collapse
How can I check this right?
Surely, your speaker is bricked. It's a known problem of the Prophet.
Why just after flashing? Only a coincidence, I think.
Regards.
Nostramo
Nostramo said:
Surely, your speaker is bricked. It's a known problem of the Prophet.
Why just after flashing? Only a coincidence, I think.
Regards.
Nostramo
Click to expand...
Click to collapse
How can you say it's bricked :S
I'd worked fine.. everything... except the sound :-(
binky11 said:
Hi,
I've downgraded from WM6 (Smart1 v2) to LvsW RUU_Prophet_220734_2207114_024721_NVID.
But now my sound doesn't work :'(
If I use my headset...I hear the sound..but without NOTHING!
Anybody else got this problem?
I did serveal flashes but no sound :-(
Click to expand...
Click to collapse
Yes dude this is a problem with almost every prophet I also got it couple of months ago n got it repaired under warranty Actually ur speaker is fine its a problem with the headphone Jack..............
Fady said:
Yes dude this is a problem with almost every prophet I also got it couple of months ago n got it repaired under warranty Actually ur speaker is fine its a problem with the headphone Jack..............
Click to expand...
Click to collapse
I just figured it out yes
Thanks!
one stupid que - how to flash rom?
i am newer joined to this forum and have O2 xda Neo
please tell me... how to?
I took something good from my O2 XDA Flame.
It comes from wm5 device and works fine in my kaiser and Cruise. After the installation do a soft reset.
panosha said:
I took something good from my O2 XDA Flame.
It comes from wm5 device and works fine in my kaiser and Cruise. After the installation do a soft reset.
Click to expand...
Click to collapse
Is it only for wired headset or also for BT?
victoradjei said:
Is it only for wired headset or also for BT?
Click to expand...
Click to collapse
It's only for the wired headest and internal speaker... not bluetooth.
And it works like a charm!!!
athanaso77 said:
It's only for the wired headest and internal speaker... not bluetooth.
And it works like a charm!!!
Click to expand...
Click to collapse
I second this. Works great!! (Softreset after install)
Olioaglio
looks great...
ThanX
What's for this SW used for?
Better sound.
Does anybody have a german version of this software?
Bib_x said:
Does anybody have a german version of this software?
Click to expand...
Click to collapse
Are you kidding? This few simple dialogues are no problem even
for completely non english speaking persons by just playing around
with the few sliders and settings. Anyway, maybe it could be able to
customize with any resource editor. Give it a try...
Olioaglio
I am from yesterday a happy Touch Cruise owner and i think you must try this for better sound in your devices.
Maybe i must try to cook something.
panosha said:
I am from yesterday a happy Touch Cruise owner and i think you must try this for better sound in your devices.
Maybe i must try to cook something.
Click to expand...
Click to collapse
It smells good already. If you need donation, count me in
I don't need any donations, thank you, i 'm better without it.
Bravo Panos, Great job. Keep going
Kostas
panosha said:
I don't need any donations, thank you, i 'm better without it.
Click to expand...
Click to collapse
It looks beautiful, nice job, continue developing for Polaris please Hoping to see releases from you soon, thanks
Just to let you know this did not work on my polaris.
I have an Orbit 2 that i haven't had time to upgraded the ROM on so its the stock o2 windows mobile 6.1 with 1.59.44.02 radio that i have upgraded.
When i installed the cab, did a soft reset and attempt to enable it said that there was an error and it couldn't load the driver. After that i had no sound whatsoever. When i uninstalled this my sound returned.
Has anyone any ideas what the problem is?
thanks
Fergus278 said:
Just to let you know this did not work on my polaris.
I have an Orbit 2 that i haven't had time to upgraded the ROM on so its the stock o2 windows mobile 6.1 with 1.59.44.02 radio that i have upgraded.
When i installed the cab, did a soft reset and attempt to enable it said that there was an error and it couldn't load the driver. After that i had no sound whatsoever. When i uninstalled this my sound returned.
Has anyone any ideas what the problem is?
thanks
Click to expand...
Click to collapse
the same for me!!! some driver misssing!!!
Same here... and no sound anymore! Even after deinstallation and soft-reset!!! It's not compatible with win 6.1!
But uninstall isn't enough: I think it is the wavedev-entries in the registry! Can somebody please export his Wavedev in registry [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] for me or give me all values in there? Thank you so much!!!
Okay, I did a little reasearch. Try this cab here. This will do the job for the polaris with windows 6.1
SRS Wow HD, seriously screws up your sound irreversably ALL THE TIME. When you turn off the SRS, it doesn't revert your sound to factory, it reverts it to garbage, same with when you uninstall SRS. As for using SRS, it sounds decent, but the fidelity of your sound is lost. Try plugging your cruise into an aplified system and crank up the volume. You'll notice that the sound starts to clip and degrade much more quickly than before as the volume goes up.
I used to use this program all the time, until I realised what I was missing after a hard reset reverted me to factory sound once again.
EDIT: And to the people who asked about bluetooh, yes it can be made to work with bluetooth after a registry change, however, like I said before, you don't gain very much using this program.
I have a problem that i have to use hand free to hear my mobile but when somebody call it start to ring and i hear it . the mic doesn`t work at all
please can anyone help.
Thanks
seriously non-informing post.
To establish what is wrong we need info because our crystal balls aren't working at this moment, sorry for the inconvenience caused by the malfunctioning crystal balls.
What device, which ROM which radio, when did it stop working. etc etc etc.
the-equinoxe said:
seriously non-informing post.
To establish what is wrong we need info because our crystal balls aren't working at this moment, sorry for the inconvenience caused by the malfunctioning crystal balls.
What device, which ROM which radio, when did it stop working. etc etc etc.
Click to expand...
Click to collapse
hey Eq, my balls are working just fine thanks, as to the question however, i have no idea.......OT i know, but couldnt resist ha
timmymarsh said:
hey Eq, my balls are working just fine thanks, as to the question however, i have no idea.......OT i know, but couldnt resist ha
Click to expand...
Click to collapse
The problem with crystal balls is that they break easily when you let others play with them
the-equinoxe said:
The problem with crystal balls is that they break easily when you let others play with them
Click to expand...
Click to collapse
Ha ha.... so true!! Ever wondered why guys dont cross their legs........?
Sorry......
hey
I`m v.sorry for my incomplete information
my device is :
T-Mobile MDA
Rom : 2.21.2.6 WWE
Radio : 02.19.11
doesn`t work a month ago (Telephone speakers work only when someone call i hear ring tone & to hear him i must use headset plus MICROPHONE doesn`t work at all ) i know its a complex problem but I count on you...
thanks u all.
theda said:
hey
I`m v.sorry for my incomplete information
my device is :
T-Mobile MDA
Rom : 2.21.2.6 WWE
Radio : 02.19.11
doesn`t work a month ago (Telephone speakers work only when someone call i hear ring tone & to hear him i must use headset plus MICROPHONE doesn`t work at all ) i know its a complex problem but I count on you...
thanks u all.
Click to expand...
Click to collapse
If the jack connector-contacts are dirty it sometimes happens that the device keeps hanging in handfree modus.
You can try the following:
-remove battery (!)
-spray a bit of contact spray into the headphone jack-connector of the device.
-plug and unplug the jackplug several times (cleaning the jackplug every few strokes with a tissue to remove any dirt and keep it away from the connector), and reapplying contact-spray when necessary.
-leave the device to dry for an hour or so (contact spray doesn't cause any short circuits, but I always leave it to dry before testing).
-plug in the battery, and test the device.
Regards,
EqX
Thanks
thank you EqX
i`ll try it and tell u ..
thanks again
Hi,
Is here somebody, who has bought this phone? Will be here somebody so kind to make and post the firmware backup for this phone?
Thank you very much!
hello Teosi,
any info on rooting, backing up this phone?
thanks
How to root Jiake JK11
Actually on youtube, you can find out how to root this phone, is very easy.
waiting reply
teosi01 said:
Hi,
Is here somebody, who has bought this phone? Will be here somebody so kind to make and post the firmware backup for this phone?
Thank you very much!
Click to expand...
Click to collapse
Which device's firmware is highly compatible to jk11??
nireshis said:
Which device's firmware is highly compatible to jk11??
Click to expand...
Click to collapse
It seems like nobody actually bought this phone. No reviws. No roms no ports..
shikhar623 said:
It seems like nobody actually bought this phone. No reviws. No roms no ports..
Click to expand...
Click to collapse
well i bought the phone... found only one rom, and it's for restoring original stock rom... nothing else...
other forum
actually i got a russian forum discussing about this phone... there have been quite a few discussion going on about the gps, cases, and roms...you'll need to translate the page... the forum--> forum.china-iphone.ru/jiake-jk11-mtk6582-5-qhd-1g-ram-2200mah-4-2-os-t32171.html :fingers-crossed:
is the OTG feature working on Jiake Jk11? hows Wifi signal quality and GPS fix time?
shikhar623 said:
is the OTG feature working on Jiake Jk11? hows Wifi signal quality and GPS fix time?
Click to expand...
Click to collapse
Dont know about OTG, but wifi signal is very good (better than my old sony xperia sola). i had problem with GPS, did a hell lot of tweaking and reading nothing helped... then stumbled upon a forum saying that SMS car can cause problems, and by removing card>starting phone without sms card>shutdown>reinserting card solved my GPS problem...
about GPS fix... it seems its ok, nothing special. just in the middle i suppose.
oktobar18ti said:
Dont know about OTG, but wifi signal is very good (better than my old sony xperia sola). i had problem with GPS, did a hell lot of tweaking and reading nothing helped... then stumbled upon a forum saying that SMS car can cause problems, and by removing card>starting phone without sms card>shutdown>reinserting card solved my GPS problem...
about GPS fix... it seems its ok, nothing special. just in the middle i suppose.
Click to expand...
Click to collapse
Hi oktobar, Is there Any development going on for this phone? I am interested in OTG feature. Can anybody please verify that.
Thank You
OTG
shikhar623 said:
Hi oktobar, Is there Any development going on for this phone? I am interested in OTG feature. Can anybody please verify that.
Thank You
Click to expand...
Click to collapse
HI,
i am actually trying to connect my pendrive ...mouse ...ps2 keyboard and mouse.. but none of them work.. the otg feature is actually not working..i tried some app to troubleshoot and found that there is a missing driver called "S3C host driver" ..for the gps locking ...i got some problem first.. then i tried to lock the gps using "mobileuncle" first then used if in other apps..now it lock in 10 seconds less if you are in an open area.
stock firmwre for jiake jk11 mtk6582 smartphone
teosi01 said:
Hi,
Is here somebody, who has bought this phone? Will be here somebody so kind to make and post the firmware backup for this phone?
Thank you very much!
Click to expand...
Click to collapse
i got a firmware. check it from a buyer.
Credit goes to blog(.)geekbuying.com/index(.)php/2014/02/21/stock-firmwre-for-jiake-jk11
Good phone.
teosi01 said:
Is here somebody, who has bought this phone?
Click to expand...
Click to collapse
I have the phone. I think it is very good for its price :good:. Wifi reception very good, GPS normal, USB-OTG is not there. The only minor thing is the camera which does not make clear pictures and is only 5MP I think, although it stores pictures in as much as 12MP, but those are not sharp.
Camera quality JK11?
Thanks for the remarks about this phone, interested in buying it perhaps. Could someone pls upload some photo samples of it to judge camera quality? Or describe how photo quality compares to a mainstream digital camera?
Thanks!
Does anybody know a valid firmware (rom) or kernel, or modem,..... for JK11 that it get better wifi signal than stock rom? It spents a lot of time to load web pages.
Hello, this is my first post on XDA I recently bought a OPO from a friend fairly cheap, he just changed the digitalizer on it as he cracked the screen. The only problem was that the loud speaker stopped working when he replaced it. Everything else on the phone is working fine. I've opened up the phone to look at the ''motherboard'' which the speakers connect to, can't see any issues (would post a picture on the parts i mean, but since i haven't made 10 posts i can't have links in my posts). Now, can it be this part acting up? As i read somewhere that this part also controlls the vibration, and the 3 buttons in the bottom of the phone. But those work just fine. Or could it be the actual speakers? But i couldn't think that he could possibly manage to break the speakers somehow... Any suggestions? Also, english isn't my main language so excuse me if there are any errors in my text
aerotox said:
Hello, this is my first post on XDA I recently bought a OPO from a friend fairly cheap, he just changed the digitalizer on it as he cracked the screen. The only problem was that the loud speaker stopped working when he replaced it. Everything else on the phone is working fine. I've opened up the phone to look at the ''motherboard'' which the speakers connect to, can't see any issues (would post a picture on the parts i mean, but since i haven't made 10 posts i can't have links in my posts). Now, can it be this part acting up? As i read somewhere that this part also controlls the vibration, and the 3 buttons in the bottom of the phone. But those work just fine. Or could it be the actual speakers? But i couldn't think that he could possibly manage to break the speakers somehow... Any suggestions? Also, english isn't my main language so excuse me if there are any errors in my text
Click to expand...
Click to collapse
Make sure the daughter board(speaker assembly) at the bottom of the device is properly aligned and well screwed.
Mr.Ak said:
Make sure the daughter board(speaker assembly) at the bottom of the device is properly aligned and well screwed.
Click to expand...
Click to collapse
Thanks for the tip! I tried checking that it was in place and tightening the screws, still no luck I think i might try buying a pair of new speakers
aerotox said:
Thanks for the tip! I tried checking that it was in place and tightening the screws, still no luck I think i might try buying a pair of new speakers
Click to expand...
Click to collapse
Confirm from your frand if speakers were working before and also which ROM are you using?
Mr.Ak said:
Confirm from your frand if speakers were working before and also which ROM are you using?
Click to expand...
Click to collapse
Yes, the speakers were working before he changed the digitalizer. I'm on Cyanogen 12.1-YOG4PAS1NO, no custom rom or recovery on the phone.
aerotox said:
Yes, the speakers were working before he changed the digitalizer. I'm on Cyanogen 12.1-YOG4PAS1NO, no custom rom or recovery on the phone.
Click to expand...
Click to collapse
You can try flashing Cos13.1.x through fastboot to see if it makes any difference,
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Also,can you hear in-call voice?
Mr.Ak said:
You can try flashing Cos13.1.x through fastboot to see if it makes any difference,
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Also,can you hear in-call voice?
Click to expand...
Click to collapse
Think that would help? Also, yes everything else works.
aerotox said:
Think that would help? Also, yes everything else works.
Click to expand...
Click to collapse
Yes it can be...give it a try.
Mr.Ak said:
Yes it can be...give it a try.
Click to expand...
Click to collapse
I tried flashing the newest stock rom from that link, still no luck.. seems like it's hardware releated. Just ordered new loud speakers, they were very cheap anyways so. Will update when i recive them
aerotox said:
I tried flashing the newest stock rom from that link, still no luck.. seems like it's hardware releated. Just ordered new loud speakers, they were very cheap anyways so. Will update when i recive them
Click to expand...
Click to collapse
Did you ordered the whole daughter board?
Mr.Ak said:
Did you ordered the whole daughter board?
Click to expand...
Click to collapse
Yes i did