is it possible to browse internet with mi pc connection through active sync, i just can do it using cell connection. qtek 1010, wallaby, xda.
yes it's possible
if it's turn on in activesync
if your firewall let it
and if you havent picked my isp as your network when connected to activesync
i don´t get it at all
OK, PASS THROUGH IS ACTIVATED IN ACTIVE SYNC 3.8,
FIREWALL IS NOT ENABLED,
AS NETWORK ADAPTERS I HAVE:
ASYNCMAC1 NDISWAN
NE2000
PPTP1 NDISWAN
IN ALL OF THEM "USE SERVER-ASSIGNED IP ADDRESS"
DO I HAVE TO CHANGE ANYTHING HERE OR IN CONNECTIOS WHERE DEFAULT INTERNET SETTINGS IS CHOSEN AND GPRS PROVIDER INFO, SHOULD I SET NEW HERE?
REMEBER I HAVE PHONE POCKET PC 2002.
THANKS FOR YOUR HELP, I´VE BEEN A WHILE AROUND THIS.
Set the passthrough connection to "The Internet"
Worked for me.
settings->Connections->Connections->Advanced->Select Networks
it says
Programs that automatic... connect to the internet should connect using
and there is a dropdown box
When i have pushmail active on the Treo i.e. set it in sync schedule to 'as items arrive' and i try to make a modem connection over bluetooth through the Treo, i see that he disconnects the internal internet connections but reconnects directly after that for syncing again. the modem connection then fails. when i set it to manual sync, it works: when i connect from the laptop i see the internal connection closing on the Treo and after that the laptop connection comes up.
I find it quite a hassle to set the sync schedule to manual every time and often i forget to set it back to 'as items arrive'. is there an easier way to make the modem connection without having to change settings on the Treo. It would be so much easier if you could keep the phone in your pocket.
Bernd
I noticed that if my phone is connected to ActiveSync, and i replied to a call; it gets disconnected!!!
this was not the case in TytnII...
any idea, why is this?
at my Hermes it was like that. When I pick up a phone call the data connection stops. Perhaps it has something to do with the edge service.
Try to allow data conections while connected on WDMC or ActiveSync.
Cheers
it's already set to allow wireless connection...!!
i use the same settings with my TyTnII, and it works.
but still not working with the TP
When you receive a call fromt eh TP the screen will shut down which in turn will close the connection with active sync. Turn the screen back on again and you regain your connection.
or you can change settings at advanced config to always on top.
2 Questions:
[Question 1] - SOLVED & Thanks to all~
I want to use my Touch Pro to check my hotmail through USB internet connection with my PC. *Not Outlook @ my PPC.
What I've done:
1. I've set up an Hotmail account at my Touch Pro
2. I've tested to check Hotmail using HSDPA/3G/EDGE connection, everything is fine.
3. After plugging with my USB to my PC, I can browse internet through Opera.
Problem:
1. But with the USB connected to my PC, everytime I try to check my Hotmail from my Touch Pro, it starts connecting to internet by itself using HSDPA/3G/EDGE.
2. How to make it to use my USB connection?
[Question 2] (NEW & not solve yet > added & edited @ 17/10/2008)
Another question (but still regarding check email through USB).
My Touch-Pro is sync with my office PC's Outlook with my POP3 email. I'm at home now connected USB to my home PC (with Internet), can I use my mobile to check that outlook email through this USB connection?
Please, please, please help...
littlemao said:
I want to use my Touch Pro to check my hotmail through USB internet connection with my PC. *I don't wanna use Outlook.
What I've done:
1. I've set up an Hotmail account at my Touch Pro
2. I've tested to check Hotmail using HSDPA/3G/EDGE connection, everything is fine.
3. After plugging with my USB to my PC, I can browse internet through Opera.
Problem:
1. But with the USB connected to my PC, everytime I try to check my Hotmail from my Touch Pro, it starts connecting to internet by itself using HSDPA/3G/EDGE.
2. How to make it to use my USB connection?
Please, please, please help...
Click to expand...
Click to collapse
I don 't know how to select your internet connection actually. But you can allways block your HSDPA/3G/EDGE internet connection with NoDATA software (freeware, just two screen taps) enforcing your mobile use USB.
If anyone knows another solution I 'll be happy to hear.
I have an 838pro, but I usually just close any data connections first, then when the box pops up saying its going to connect via 3g, I cancel it and then it defaults to the usb/wifi connection. It seems WML defaults to using your 3g connection every time so unfortunately you have to do this every time.
Cheers
Thanks for the fast reply, will try both and update this thread again.
Btw, any chance we can modify the registry or etc to change the default connection?
Hey, it works! I've install NoData and use it to disable my Touch Pro 3G/GPRS connection, and check my Hotmail, and it works perfectly!
Thanks, freco & wireless
Glad you got it sorted - just a quick thought...
In the Activesync connection settings there is an option File > Connection Settings > "Allow wireless connection on device when connected to desktop" - if you disabled/unchecked this would it not do the same thing?
I think "wireless connection" means WiFi.
If you 're wright when cradled or usb connected you cannot make or recieve calls with these setting, which is not happening.
freco said:
I think "wireless connection" means WiFi.
If you 're wright when cradled or usb connected you cannot make or recieve calls with these setting, which is not happening.
Click to expand...
Click to collapse
I thougt it only applied to data - I've certainly made calls with my device docked. I`ll have a play with my htc later...
Just some update to this thread, I just have my Touch Pro 'hard-reset' due to touch panel was not functioning, and now after total hard-reset ...
I can use the USB connection without having 'NoData' installed...
wondering why...
in activesync connection settings, untick 'Allow wirelss connection on device when connected to desktop'
this should work
For each email account you have to manually choose which type of connection to use.
In email got to:
Menu->Tools->Options, select email, ->Edit account setup->Advanced Server Settings.
Now you can choose if you want the email to use GPRS or Wifi but you have to do this whole thing everytime you change! Not good.
For USB connection I don't know - could you perhaps tell us what it is using?
Thanks.
Another question (but still regarding check email through USB).
My Touch-Pro is sync with my office PC's Outlook with my POP3 email. I'm at home now connected USB to my home PC (with Internet), can I use my mobile to check that outlook email through this USB connection?
littlemao said:
2 Questions:
[Question 1] - SOLVED & Thanks to all~
I want to use my Touch Pro to check my hotmail through USB internet connection with my PC. *Not Outlook @ my PPC.
What I've done:
1. I've set up an Hotmail account at my Touch Pro
2. I've tested to check Hotmail using HSDPA/3G/EDGE connection, everything is fine.
3. After plugging with my USB to my PC, I can browse internet through Opera.
Problem:
1. But with the USB connected to my PC, everytime I try to check my Hotmail from my Touch Pro, it starts connecting to internet by itself using HSDPA/3G/EDGE.
2. How to make it to use my USB connection?
Click to expand...
Click to collapse
Hi have you solved hotmail problem with USB ?
hey i have an HTC touch but for some reason i cant change the password on the wireless network on the connection manager... i have an Alltel phone. but there are settings on it that change the password that i put in it to another one.. do you know how to fix that?
littlemao said:
Hey, it works! I've install NoData and use it to disable my Touch Pro 3G/GPRS connection, and check my Hotmail, and it works perfectly!
Thanks, freco & wireless
Click to expand...
Click to collapse
Huh, I installed it on my Fuze, turned off both data connections shown, launched Opera and it went right online via 3G! I then tried a soft reset and found the same behavior. The program seems to do nothing.
To solve this issue without downloading or using any extra piece of software:
1. Through Settings > All Settings > Connections > Connections
2. select Advanced > Select Networks > then choose My ISP as your internet communication method
3. choose New > enter any name you like then select a modem type "Hayes Compatible on COM1" or any option rather than Cellular GPRS, 3G.
4. the trick, just enter *99***2# in the required phone number as this is a Windows-based code to directly call a device for internet connection where you can replace the number 2 with any other number for multiple sharing internet connection with different devices at the same time.
Now everything will work just fine
Important notes:
-------------------
Make sure that:
1. in the "Network Connections" in Microsoft Windows XP or Vista you have a new icon of "Internet Connection" under Internet Gateway that appeared once you have connected your HTC in ActiveSync or WMDC 6.1 modes.
Hint:
you can use Internet Sharing application installed in HTC in order to create a new ISP connection profile instead of going through Connections option.
Hope this contribution could be usfeul,
Thanks
Hey guys...
I use ActiveSync to sync with exchange 2007 (direct push).
When i sync using GPRS/HSPDA/EDGE or wifi a sound alert is played when i recieve a new mail.
This is not the case when my HD2 is connected to the exchange server using USB and bluetooth...
Which is really annoying. I end up using (costly) GPRS/../.. while i could just as easily use a free USB connection just because i need to be notified of new mail messages.
Does anybody know about a registry setting or such wich may change this behavior?
Thx