Wifi channel 13 deactivated in Cyanogen Mods - myTouch 3G, Magic Android Development

Hi together,
I just installed the Cyanogen MOD on my 32B and stumbeld over the Problem that I can't see my WiFi anymore. After a short search I'm quite sure that the Problem is the channel: #13, which is not allowed at least in the USA (?). Anyway out of performance reasons it's not an option to switch the WiFi channel, so the question is:
How do I open up WiFi channel 13 for my 32B?
greetz Dohnut
---
If the Question seems to be too stupid it's because I lack experience with Linux / Android and not because I am trying to offend you...

From what I remember from other ROMs you go settings>wireless controls>wifi settings> then hit menu and choose advanced. Then choose regulatory domain and set the number of channels you want.
HTH

Oh thank god!
Thank you , thank you thank you!
My wireless has been driving be nuts since I rooted and got apps2sd running.
One second I could DL fine, the next second the DL would sit for 10 minutes.
Youtube would not load anything, and I was about to email cyanogen and ask WTF?
Now I am screaming right along as I should.

Related

Shortcut to WiFi settings

Hi,
sorry for a "repost" but I was told I can't ask this in general Wizard forum since I flashed it with WM6.1. So...
is there a way to make a shortcut to the Configure Wireless Networks app?
I hate going thrugh start/Settings/Connections or any other way there is (commmanager settings...) and my wizard often doesn't connect to my wlan with ssid hidden even though the reception is OK.
I'm on TNT WM 6.1.19199 (I'm running it only for 3 days, but for now is seems a great ROM - respect to its right! ).
Thanks, Mike
al3d said:
Hi,
sorry for a "repost" but I was told I can't ask this in general Wizard forum since I flashed it with WM6.1. So...
is there a way to make a shortcut to the Configure Wireless Networks app?
I hate going thrugh start/Settings/Connections or any other way there is (commmanager settings...) and my wizard often doesn't connect to my wlan with ssid hidden even though the reception is OK.
I'm on TNT WM 6.1.19199 (I'm running it only for 3 days, but for now is seems a great ROM - respect to its right! ).
Thanks, Mike
Click to expand...
Click to collapse
I have the same issue. The only ROM that my wi-fi works correctly is MFrazz XDA XMRC5. This is an big problem for me and i´m suprise than anybody seems to import.
Did anyone have an answer to the original question? Thanks!
same for me
Hi all,
thanks again for the great job your doing,
I have the same problem here, Wireless is unstable and sometimes not working at all (network marked as unavailable).
I tried many roms (but I'm using TNT right now) and the unstablilty is always here.
(and again, network is down...., start, stop and...network is up...and VOIP back again...arg !! down again....)
best regards,
Albin
http://www.geocities.com/sanmohile/QtekUtilities/ppc2k-control-panel-links.zip
Here you can find a file that contains some shortcuts ready to use.
"Network adapter" run also into My WM6.1 trinity
Now i'trying to change its icon...

Cheff's!!!!!!!!!!! WIFI issues with roms

ok with l26 v9 and Ryncppr Version V6 wont pick up my homes wifi (ssid is just not there on the wifi screen of my tytn2's settings so i cant connect to it as its not there to click on it). After flashing a few others namely romeos latest and l26 v8 including flashing the correct hard spl(as recommended in rom thread) for all of them my phone finds my wifi again any ideas people? I have tried other wifi managers etc but it still wont be found.
i have also mentioned this in l26's v9 thread and people didn't seem to know i have not said anything to ryncppr as i flashed out of it instantly as i use my wifi all the time at home. this is a very frustrating problem.
And yes i have reset my router and and all that sort of stuff.
I Have all ready tried;
Different radio's
Reflash
Hard reset (after every flash i have ever done)
2 Downloads of l26 v9 from 4shared and rapidshare
2 routers tried
Third party wifi apps
hidden ssid
non hidden ssid
wep disabled
wep enabled
a few channels
sitting next to the router
resetting my router
firmwear update (no further updates)
all router settings were tried on both routers
UPDATE!!!!!!!!!!!!!!
Ok after testing some of the idea given by readers of the thread i have determind this is definatly a rom issue with L26 v9's rom i will test Ryncppr later today or tomorrow. L26 v9 rom will not pick up wifi on channels 12,13,6 and 5 maybe more but after i set my router to 5 my laptop lost the wireless and i had to hook up with a cable to fix. but from other peoples wifi in my street i should be ok on channel 3 aswell. i shall go and post these findings in the l26 thread so people know. i sadly am not a chef etc and have no idea about how to fix this i shall play and see if i can find anything.
this test has been done at hard spl 3.59 (rom recomended) radio 1.58.25.17 and 1.65.24.36 hard reset after flash.
Please inform if you have/find similar results/problem
Did you try different radios?
Ask clearer questions
vj4 said:
ok with l26 v9 and Ryncppr Version V6 wont pick up my homes wifi. After flashing a few others namely romeos latest and l26v8 including flashing the correct hard spl for all of them my phone finds my wifi again any ideas ppl? I have tryed other wifi managers etc but it still wont be found.
i have also mentioned this in l26's v9 thread and people didnt seem to know i havnt sed anyhting to ryncppr as i flashed out ofit instantly as i use my wifi all the time at home. this is a very frustrating problem.
And yes i have reset my router and and all that sort of stuff.
Click to expand...
Click to collapse
Man, this post is giving me a headache just 1) trying to understand what the problem is, and 2) trying to understand what you've tried already, and 3) trying to understand why you didn't post this in a specific ROM's thread.
Potential answer #1: ESL. But nope, I look at your country and it's (!) England.
Potential answer #2: You're in an altered state of mind.
-Humbert
HHumbert said:
ESL. But nope, I look at your country and it's (!) England.
Click to expand...
Click to collapse
<sarcasm>
Well, look at it this way, he (1) used the correct SPL, (2) tryed [sic] other Wifi managers, (3) reset his router, and (4) all that sort of stuff.
Based on this (especially # 4, because that's a "catch-all") , we can absolutely remove anything that might be specific to his situation or setup (including his phone and/or router). With such conclusive and definitive statements, it can then absolutely only be a problem with every single one of the ROM's he tried.
I know, I know - you might dispute the fact that every single solitary ROM out there the same WiFi bug in it (which hasn't hit me, and probably not you)), but that seems to be the only possibility given (1) to (4). Since every cooked ROM out there must immediately be recooked, the main topic heading is actually well chosen!
</sarcasm>
Truely confused that my ROM is there since I was using WiFi with it earlier today???
ryncppr said:
Truely confused that my ROM is there since I was using WiFi with it earlier today???
Click to expand...
Click to collapse
Nope - you are incorrect; you did NOT use WiFi with it today. Recook immediately
ok well thanks for reading guys the problem is only with my router i can find the house next doors and some 1's from up the street. like i sed i have done all the hard spl stuff. the radio i dont belive to be the issue as the same radio on other roms works fine and after flashing a differnt one i still have the same problem
when i say i have tryed everything i have renamed my ssid on my router hidden un hidden it etc.
HHumbert said:
Man, this post is giving me a headache just 1) trying to understand what the problem is, and 2) trying to understand what you've tried already, and 3) trying to understand why you didn't post this in a specific ROM's thread.
Potential answer #1: ESL. But nope, I look at your country and it's (!) England.
Potential answer #2: You're in an altered state of mind.
-Humbert
Click to expand...
Click to collapse
sorry shall i rewrite the post in american just for yourself................
ermmmmmmmmmmmmmmmmmmm doh doh doh doh
vj4 said:
sorry shall i rewrite the post in american just for yourself................
Click to expand...
Click to collapse
... As opposed to the language that you're writing in (which isn't English, I'm guessing, even though my native language is "American").
Seriously, man. We're just trying to help you, but if we can't understand you with the typos, slang, and lapses in data-points, it becomes too hard, and then it becomes much easier for us to slag you because of the typos in your post.
And believe me, I try not to do that because it's such a cheap shot, but this post raises lack of communication to a new level.
Back to the problem, the new data-points are helpful. If the router seems to be the problem, what kind of router are you using?
HHumbert said:
... As opposed to the language that you're writing in (which isn't English, I'm guessing, even though my native language is "American").
Seriously, man. We're just trying to help you, but if we can't understand you with the typos, slang, and lapses in data-points, it becomes too hard, and then it becomes much easier for us to slag you because of the typos in your post.
And believe me, I try not to do that because it's such a cheap shot, but this post raises lack of communication to a new level.
Back to the problem, the new data-points are helpful. If the router seems to be the problem, what kind of router are you using?
Click to expand...
Click to collapse
How can other people read and understand the post but yourself. The router is fine i have only had the problem with 2 roms the ones listed befor. Every other rom has been fine. The radios have been fine i have 6 laptops running off the router and 2 pc's all fine the only problem is with my phone. My old wizard picks it up fine aswell. As said befor the recomend hard spl's were used, the radio has been changed and the problem is still there. And befor anybody ask's yes i did hard reset after all flash's. This is a rom problem im not stupid i have checked everything on the router twice. i have changed settings on the router and my phone still cannot find it. Leading it to be a rom issue as it was fine with l26 v8 v7 and v6 all of duttys i can go on. and like i have sed befor i have changed the name of the router to names of routers around me and it still cant find it. i honestly do not know how to make this more clear.
This is driving me mad as l26 v9 is my fav rom so far and i have found it very stable and fast but i cannot use it with my wifi.
Please fill me in on the "lapses in data-points" ican list all the hard spl's rom (Already said) and radios if you so need. but i do not belive these to be required.
I don't cook roms or anything like that so I'm not an expert, but since you could find your neighbors router but not yours why don't you post your brand and type of router and see if anyone can find a link.
jdmba said:
<sarcasm>
Well, look at it this way, he (1) used the correct SPL, (2) tryed [sic] other Wifi managers, (3) reset his router, and (4) all that sort of stuff.
Based on this (especially # 4, because that's a "catch-all") , we can absolutely remove anything that might be specific to his situation or setup (including his phone and/or router). With such conclusive and definitive statements, it can then absolutely only be a problem with every single one of the ROM's he tried.
I know, I know - you might dispute the fact that every single solitary ROM out there the same WiFi bug in it (which hasn't hit me, and probably not you)), but that seems to be the only possibility given (1) to (4). Since every cooked ROM out there must immediately be recooked, the main topic heading is actually well chosen!
</sarcasm>
Click to expand...
Click to collapse
This is an internet forum. People can't spell and they certainly don't know what "[sic]" means.
I would suggest comparing the values in the following registry key, between the working and non-working ROM's:
[Mobile Device\HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms]
There may be a setting in there that is causing the conflict (or the driver revision used, check version/datestamp/filesize of TNETW1251.dll between working/nonworking)
For example, on my HP IPAQ hx4705, if I set HTCPowerMode to 2, on my old wifi router I would get random disconnects etc. - setting to 0 (which uses more power) fixed those problems right up. I no longer have these issues after upgrading my router.
vj4 said:
ok with l26 v9 and Ryncppr Version V6 wont pick up my homes wifi. After flashing a few others namely romeos latest and l26v8 including flashing the correct hard spl for all of them my phone finds my wifi again any ideas ppl? I have tryed other wifi managers etc but it still wont be found.
i have also mentioned this in l26's v9 thread and people didnt seem to know i havnt sed anyhting to ryncppr as i flashed out ofit instantly as i use my wifi all the time at home. this is a very frustrating problem.
And yes i have reset my router and and all that sort of stuff.
Click to expand...
Click to collapse
VJ – check your power save mode on the ROMs that work. Read somewhere that it needs to be on best performance to work on some ROMs. Hope this helps.
I am surprised you are blaming the ROMs you flashed for your problem as all the threads for those ROMs do not have anyone flagging wireless as a problem with a flood of others agreeing with them. I myself flash almost all new ROMs posted on the Kaiser ROM Development forum and with an exception of one ROM (which is now fixed) all work with my Wireless at home and at work. Try a different radio as suggested before (take note on people discussing the radio versions in those specific ROM threads) and defiantly try somewhere with a wireless hotspot.
One BIG question: How did you reset your wireless router? I ask because it sounds like it is not releasing new IP addresses. You have flashed new ROMs which will clear the original IP thus requesting a new one from your router.
i have also been having problems with my wifi on the secure network at my house. my hermes connects just fine i have flashed it at least 50 times. but my tilt can only connect to secure wifi on the roms that use the radio 1.64.xxx and lower of course there are not many secure routers for me to test on.
supps2 said:
VJ – check your power save mode on the ROMs that work. Read somewhere that it needs to be on best performance to work on some ROMs. Hope this helps.
Click to expand...
Click to collapse
Sorry man good idea but didnt work thanks for ur idea tho
Dangerously said:
I am surprised you are blaming the ROMs you flashed for your problem as all the threads for those ROMs do not have anyone flagging wireless as a problem with a flood of others agreeing with them. I myself flash almost all new ROMs posted on the Kaiser ROM Development forum and with an exception of one ROM (which is now fixed) all work with my Wireless at home and at work. Try a different radio as suggested before (take note on people discussing the radio versions in those specific ROM threads) and defiantly try somewhere with a wireless hotspot.
One BIG question: How did you reset your wireless router? I ask because it sounds like it is not releasing new IP addresses. You have flashed new ROMs which will clear the original IP thus requesting a new one from your router.
Click to expand...
Click to collapse
i have tryed differnt radios and still nothing. the problem isnt that im not getting an ip the problem is my homes wifi dusnt come up on my phone at all its ssid just plain isnt there but other poeple in my streets wifi is. i reset the router inside its software and turning it off and on again thanks tho.
IronSavior said:
This is an internet forum. People can't spell and they certainly don't know what "[sic]" means.
Click to expand...
Click to collapse
what dus [sic] mean? do you know?
Kinglouis3 said:
I don't cook roms or anything like that so I'm not an expert, but since you could find your neighbors router but not yours why don't you post your brand and type of router and see if anyone can find a link.
Click to expand...
Click to collapse
ok my router is a bt voyager 2100 but as i have sed befor i cant under stand why its a router problem as every other rom on my tytn2 and wizard have foundd it untill now.
Da_G said:
I would suggest comparing the values in the following registry key, between the working and non-working ROM's:
[Mobile Device\HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms]
There may be a setting in there that is causing the conflict (or the driver revision used, check version/datestamp/filesize of TNETW1251.dll between working/nonworking)
For example, on my HP IPAQ hx4705, if I set HTCPowerMode to 2, on my old wifi router I would get random disconnects etc. - setting to 0 (which uses more power) fixed those problems right up. I no longer have these issues after upgrading my router.
Click to expand...
Click to collapse
good plan man nice 1 will have a look dont suppose u could supply the info on ur rom and results so i dont have to flash every rom in the book to find out???? after setting it to 0 i still not there thanks.
how do i find version and datestamp? because the only date i get is yesturday when i flashed??
and dus it matter that in reg edit i have tnetw12511 and tnetw1251?
jdmba said:
Nope - you are incorrect; you did NOT use WiFi with it today. Recook immediately
Click to expand...
Click to collapse
Ummmm I am connected as I write this so I don't know what this message is all about????
ryncppr said:
Ummmm I am connected as I write this so I don't know what this message is all about????
Click to expand...
Click to collapse
i to was unsure about what that guy was saying aswell. this seems to be only me having this problem you make very nice roms ryncppr i just wantted to a. raise this issue out of indervidual threads as its not just happening on 1 rom. and b. find a soloution as if all new roms have this issue i will be stuck. i never wantted you cooks to recook i was just hopping for some ideas to fix the problem.
ok with hyperdragon III last rom i can find my house's wifi again trying to find the drivers to compare size and replace l26 v9 to see if it works. any know were i can find total commder so i can enable hidden rom files?

[ROM][PORT][ALPHA]jMod FroYo SDK Port for Dream/Sapphire 05/21

Sorry I couldn't get this earlier. I had the SDK since it dropped on developer.android.com, but I was waiting for somebody else to do it. It's been almost a day and nothing, so I did it myself (plus I've been working on getting android to work on my HD2...)
Release Name: jMod FroYo SDK Port
Release Version: 05212010.0410
Release Date: 05/21/10 04:10 AM
MD5 Sum: 229d7120460d6a737d22b4006a766b02
Credits: SDK system from Google, hardware files from HTC and AOSP.
Base Firmware: 2.2 SDK
Radio Required: 2.22.19.26i
SPL Required: Any
Partition Layout: Any/none, Ignored
Wipe Required: Yes
Special instructions: Just SDK Apps. Radio should work, so you can make calls and use the interwebs. Wifi broken. Bluetooth broken, Camera broken. Some weirdness going on with the LED, it will stay purple when not charging.
To sync Gmail and Contacts using exchange server settings:
email: [email protected]
password: password
Click to expand...
Click to collapse
Then Manual Setup, Exchange type, then
Domain\Username: [email protected]
password: password
Server: m.google.com
Use secure connection (SSL): check
Accept all SSL certificates: check
Click to expand...
Click to collapse
Download:jMod FroYo SDK Port
Wow, that was fast... downloading to give it a try
€: Funny thing. Installed, configured apn started browser, went to my favourite tech news site for testing -> Big headline: No Froyo update for G1
I think for a few hours porting time it is quite good. Sure, a lot of things don't work yet, but its much smoother than I imagined.
Yea so far it boots up and it just loaded up for me
Its not even that slow......transitions are nice but desktop scrolling isnt that good =)
I'm currently testing one with Gapps. if it works, I'll have it up in a few minutes
If Froyo AOSP source code isn't available, how the heck do we compile any wireless drivers for this?
xaueious said:
If Froyo AOSP source code isn't available, how the heck do we compile any wireless drivers for this?
Click to expand...
Click to collapse
We wait for AOSP
i have also ported this to G1 and have radio working etc.... mine was posted at ASpin so i never saw this but im wondering if if you (Jubeh) are interested in a colab to get things further along.... gtalk me [email protected] oh, i have LEDs fully functional also... working on wifi and BT but we really need gapps... they just FC for me at this point... CR
Go guys work together on this... If you need any extra testers to help I am sure many will help where they can.
Count me in if required
Has anyone tried if the Flash Player shows up in the Market when using this ROM cause Adobe said it would only appear on devices running 2.2
chrissshen said:
Has anyone tried if the Flash Player shows up in the Market when using this ROM cause Adobe said it would only appear on devices running 2.2
Click to expand...
Click to collapse
i am flashing now but believe we need google apps for that
chrissshen said:
Has anyone tried if the Flash Player shows up in the Market when using this ROM cause Adobe said it would only appear on devices running 2.2
Click to expand...
Click to collapse
That was answered many times in different threads: seems Flash requires new Market app and we don't have it yet.
I would also be glad to test, PM me. I would love to show off FroYo!
Plz work together!
If you both work on this together then we will have a working FroYo twice as fast, it would be tons of fun to beat the Nexus One to FroYo
I flashe this on the g1 2.22.23 image and it works fine u could even say its a little faster just thought I would input my discovery great work on the fast port to the g1!
the google apps?
Jit seems to be disabled, am I Right?
Linpack ~1.7 MFLOPS
dalvikvm -help says nothing of jit
Really looking forward to a more advanced build. Thumbs up for this alpha release it makes you want more froyo.
My Findings:
~First boot is quick but no set up wizard at all but timezone is defaulting to network values.
~ text messaging working however it sais that my message could not be sent yet they are recieved by recipient. as they are answering my questions.
~LED stays purple after usb unplugged.
~have set up uk vodafone APN but cannot connect to internet. No connection. (not sure why will keep trying)
~Holding Home button launches RECENTS
~NEW CAR HOME IS COOL
~ I had reformatted the SD card but states SD card is blank or unsupporte (will try reformatting)
~In Call volume seems low.
~fairly major one NOT RECEIVING INCOMING CALLS if I call myself it rings but phone doesnt show any incoming call in any way.
~Have sounds set for text messages yet no sound on incoming texts.
Will add if I find anything else
Thanks! Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!Thanks!
magpie2000k said:
My Findings:
~First boot is quick but no set up wizard at all but timezone is defaulting to network values.
~ text messaging working however it sais that my message could not be sent yet they are recieved by recipient. as they are answering my questions.
~LED stays purple after usb unplugged.
~have set up uk vodafone APN but cannot connect to internet. No connection. (not sure why will keep trying)
~Holding Home button launches RECENTS
~NEW CAR HOME IS COOL
~ I had reformatted the SD card but states SD card is blank or unsupporte (will try reformatting)
~In Call volume seems low.
~fairly major one NOT RECEIVING INCOMING CALLS if I call myself it rings but phone doesnt show any incoming call in any way.
~Have sounds set for text messages yet no sound on incoming texts.
Will add if I find anything else
Click to expand...
Click to collapse
1. Setup Wizard is part of GApps, which we don't have.
3. Did you read the first post?
4. It's a rough port from a device that doesn't have radio, I would expect that (The first post says "should", not "is").
5. Hasn't it always done that?
7. The Emulator doesn't have an ACTUAL sdcard, so this should be expected.
9. See 4.
ChiefzReloaded has gotten Gapps and a different kernel running on his:
http://www.androidspin.com/2010/05/...-running-on-t-mobile-mt3g-with-data/#comments
But it's unreleased..

Mighty rom no internet settings, Will never use it again prob

So they tell me after i switch phones that internet will work in 1 hour.. It doesnt so today i try and ask for help. They ask me to dial ##3282# which for half a milli second goes to the edit option then goes back to dial pad. So that doesnt work, they then tell me to hit the update profile button "which is under the tv out button in system settings" but its not there.
This is what i tried using
MightyROM_RhodiumW_062010 (11400)
Its very frustrating. I tried the mR X rom and it was totally sluggish and boring.
so i said fuk it and flashed 6.5 windows on the phone instead of custom rom (and guess what the setting was there and dialing ##3282# works .. how lame is that mightyrom,..
i didnt see anything telling me to install custom cab or that my internet would not work with mightyrom..
I spent along time programing my contacts into the new mightyrom thinking the internet would work then had to delete them all when switch roms.
I went with sprint lovers 6.5.x and seems great has the one thing that mightyrom had that i wanted wifi router. And has sprint navigation too (which mightyrom doesnt and office 2010 along with tons of other options and cool bigger icons) Very pleased with sprint lover rom not sure if i will even test anything else.. (sprint lovers rom actually has update profile but also can not dial ##3282# )
you know, i dont post much on there but the one thing i do is READ. There is nothing wrong with mightyrom and the internet works just fine in it. ( i have ran it several times before myself ) as for programs go search for the cabs and install them. Doesnt anyone search on how to fix problems anymore?
dude u probably just didnt know what you were doing. If you had to sit there and program numbers back instead of having sense and backing up the numbers that already shows how much of a genius you are. Not trying to diss but just pointing out the obvious. Instead of blaming someone else try looking at your own errors cuz I never had any problems out of any of those roms
Meh, I have that ROM and it works fine. I have the PRL/Profile cab, and Office 2010 Mobile for it. Wifi router works great Mike!!!
This guy just posts crap in a lot of forums guys.
atl530i said:
Meh, I have that ROM and it works fine. I have the PRL/Profile cab, and Office 2010 Mobile for it. Wifi router works great Mike!!!
This guy just posts crap in a lot of forums guys.
Click to expand...
Click to collapse
Thanks. Was considering giving it a try, but was almost put off by the op.

[Q] MW 4.3 - Data connection misbehaviou

Dear All,
it is about a month I am happly using Mildwild 4.3 (Oxy). Quick,no memory hangry and battery last quite enough not to bring my charger along side.
But...there is always a but, I have a small list of issues/questions I would like you to have a look at and maybe give me some heads up:
(listed in order of importance ..for me)
1) Data connection - I go to Wireless & Network settings --> Mobile Networks -- > Data enable I select it. Sometime the effect is the desired one: my data conntection switchs on and I am on the network. Unfortunately 8 times out 10 nothing happen. The workarounds I have found are the following a) Switch to 2G -> 3G (or the other way around). b) go Airplane mode and then go back to normal. c) Let the gsm reconnect on the GSM network
Any idea what s happening? Is it a known bug?
2) Incoming call - The main reason why I migrate from MildWild 5.0 CM to Mildwild 4.3 Oxy is because on incoming call I had a delay in the conversation, basicaly the first 2 seconds were mute. With this rom looks like the 2 seconds freeze period have migrated to the screen. Basically on incoming call for the first 1 or 2 seconds my screen stays black and I cannot neither answer nor hang up. Really annoying expecially if I forgot to put it on silent and I find myself in a middle of a meeting. What I really miss from the original HTC desire OS is the flip functionaly capable to mute the phone flipping it face down.
3) New release - Does anyone knows when a new release will be available? (4.4??...)
Well that s all my androians. I am looking forward to receive your feedback
Ciao
Stefano
Hey folks! Anyone has suggestion (expecially for my point 1) ??
stegal said:
Dear All,
it is about a month I am happly using Mildwild 4.3 (Oxy). Quick,no memory hangry and battery last quite enough not to bring my charger along side.
But...there is always a but, I have a small list of issues/questions I would like you to have a look at and maybe give me some heads up:
(listed in order of importance ..for me)
1) Data connection - I go to Wireless & Network settings --> Mobile Networks -- > Data enable I select it. Sometime the effect is the desired one: my data conntection switchs on and I am on the network. Unfortunately 8 times out 10 nothing happen. The workarounds I have found are the following a) Switch to 2G -> 3G (or the other way around). b) go Airplane mode and then go back to normal. c) Let the gsm reconnect on the GSM network
Any idea what s happening? Is it a known bug?
Click to expand...
Click to collapse
I've seen behaviour a bit like this with MW 4.3, I think it was because it didn't have the right APN settings for my network. I looked up the right settings and created two new APNs, and my phone is behaving better now.
It seems like MW 4.3 has a limited range of network settings, eg. here in Germany it lists the main networks but not all the MVNOs (resellers).
stegal said:
3) New release - Does anyone knows when a new release will be available? (4.4??...)
Click to expand...
Click to collapse
4.4 is out this week: http://forum.xda-developers.com/showthread.php?t=1353861
However it won't boot on my Desire (PVT4), despite a full factory-reset and wipe. It just sits there on the boot screen until the battery runs out, so I'm back on 4.3 for now. And I'm caught in the "you have't posted 10 times yet so you can't post in the main thread" trap, so I can't report it in the most obvious place.
Cheers m'dears,
Bryan
bryangb said:
I've seen behaviour a bit like this with MW 4.3, I think it was because it didn't have the right APN settings for my network. I looked up the right settings and created two new APNs, and my phone is behaving better now.
It seems like MW 4.3 has a limited range of network settings, eg. here in Germany it lists the main networks but not all the MVNOs (resellers).
4.4 is out this week: http://forum.xda-developers.com/showthread.php?t=1353861
However it won't boot on my Desire (PVT4), despite a full factory-reset and wipe. It just sits there on the boot screen until the battery runs out, so I'm back on 4.3 for now. And I'm caught in the "you have't posted 10 times yet so you can't post in the main thread" trap, so I can't report it in the most obvious place.
Cheers m'dears,
Bryan
Click to expand...
Click to collapse
Hi Bryan,
I could not resolve the connection problem. my parameter are ok. I made few more identical APN (just to give it a try) but with no benefit.
On the other hand I have just downloaded the 4.4 installed on top of the 4.3 (no wipe) and apparently it s working fine (could not no major improvement so far)
Cheers
Stefano
stegal said:
Hi Bryan,
I could not resolve the connection problem. my parameter are ok. I made few more identical APN (just to give it a try) but with no benefit.
On the other hand I have just downloaded the 4.4 installed on top of the 4.3 (no wipe) and apparently it s working fine (could not no major improvement so far)
Cheers
Stefano
Click to expand...
Click to collapse
Thanks, maybe I'll try 4.4 on my other Desire (a PVT1, I think) just to see if it works there.
This wouldn't be the first time I've had odd behaviour from the PVT4, by the way - its GPS wouldn't work under Mildwild-CM5, whereas earlier models were fine.
Bryan

Categories

Resources