Related
Hi,
Hardware: Vodafone VPA compact/T-Mobile MDA compact (HTC Magician).
Problem: CAB files in /Storage folder are being deleted after installation - even if they are read-only!
This only happens if they are located in the /Storage folder. I did a hard reset and soft reset afterwards to get a non-customized device but the behaviour is still the same, so this doesn't seem to be a customization "feature".
Any ideas?
Use CabInstl to install cab's. It will let you choose where to install & got the option to keep the cab.
M
oltp said:
Use CabInstl to install cab's. It will let you choose where to install & got the option to keep the cab.
Click to expand...
Click to collapse
Thanks for the hint. It looks like a good alternative to the standard procedure. However I do need an automated mechanism (installing CABs after hardreset automatically) which can be used from the extended_rom/config.txt and I, lacking detailled information about cabinstl, doubt that cabinstl can be used in "silent" mode using commandline parameters. But I'll give it a try. Meawhile we implement a workaround.
thanks.
Ok, had to wipe my computer and start again (Do it ever couple of months). So I tried to run BuildOS again but i get a message as below :
Code:
BuildOS.exe - Application Error
The application failed to initialize properly (ox0000135). Click OK to terminate the application.
Can anyone shed some light on why this will not work for me anymore!!!
Did you re-install Net Framework 2?
this is .NET framework related indeed
Thnak you both!!! I should not be let to use this!!! That worked for me!!!
I'm so dumb!
Glad I could provide a small assist. I owe you big for the RK PDF docuument (which I've used over and over again this past week) and your tip on removing the setup dll file !
Forums at their best!
saeba said:
Glad I could provide a small assist. I owe you big for the RK PDF docuument (which I've used over and over again this past week) and your tip on removing the setup dll file !
Forums at their best!
Click to expand...
Click to collapse
Well i am working on the setup.dll files, as i have found with some packages this is needed, but you can only have one file like that so!!! am doing testing on different way for doing it!
Me too. After working with the extended ROM, I have this new idea of how to customize a newly installed ROM:
After installing the ROM:
1) Create/Use a cab file that sets the autorun registry pointers to point to my Storage Card (instead of extended ROM)
2) Maintain a library of the 20+ application and customization cab files on my storage card that I need
3) Create a config.txt with pointers to these cab files
4) execute autorun.exe which then automatically runs all these cab files
5) Sit back and wait for the installations/customizations to complete !
This makes it easy to keep a library of these apps on my storage card and as new versions arrive, just toss them in there and update the config.txt install file. If I decide to go with a new ROM, no work to integrate packages into it. And no limits on the number or size of the cab files I can use this way like with the extended ROM (only 9.5 mb space there).
I'm thinking that if I don't enable the LOCK on input, I can even interact with those cabs that have a setup dll requiring input. Haven't tried that yet though.
saeba said:
I'm thinking that if I don't enable the LOCK on input, I can even interact with those cabs that have a setup dll requiring input. Haven't tried that yet though.
Click to expand...
Click to collapse
Wow, let me know if you get this working, as I'd like to do this myself. Its exactly what I do (but manually) after a new flash. I have a Setup Files folder on my SD card, and I just go down through each of the cab's I've stored there to get back up and running as quickly as possible. But my biggest issue is the ones that require manual input.
This seems like it should be doable though, as you can do similar with ActiveSync. After a new flash just go back to ActiveSync and tick off all the stuff you want to reinstall, and it will do them one right after the other. Only ones you have to be careful of are any that require a softreset after install.
saeba said:
Me too. After working with the extended ROM, I have this new idea of how to customize a newly installed ROM:
After installing the ROM:
1) Create/Use a cab file that sets the autorun registry pointers to point to my Storage Card (instead of extended ROM)
2) Maintain a library of the 20+ application and customization cab files on my storage card that I need
3) Create a config.txt with pointers to these cab files
4) execute autorun.exe which then automatically runs all these cab files
5) Sit back and wait for the installations/customizations to complete !
This makes it easy to keep a library of these apps on my storage card and as new versions arrive, just toss them in there and update the config.txt install file. If I decide to go with a new ROM, no work to integrate packages into it. And no limits on the number or size of the cab files I can use this way like with the extended ROM (only 9.5 mb space there).
I'm thinking that if I don't enable the LOCK on input, I can even interact with those cabs that have a setup dll requiring input. Haven't tried that yet though.
Click to expand...
Click to collapse
Why dont you just point the reg to your card, !!! Just like faria point it at the windows folder, you can point it at storeage card!!!
funman said:
Why dont you just point the reg to your card, !!! Just like faria point it at the windows folder, you can point it at storeage card!!!
Click to expand...
Click to collapse
Yes, thought of that. To do it as part of the ROM install though, you need to edit the ROM itself (the OEMOPERATORS registry file in Faria's build) and rebuild the ROM.
But I'm thinking of a mechanism that will work with no changes to the base ROM. That way, can pick up any of these wonderful ROMs that are coming out, just install and do this customization separate.
mfrazzz said:
But my biggest issue is the ones that require manual input.
Click to expand...
Click to collapse
Yep, same here. Funman taught me one trick - the manual input is done via a setup dll file in the cab. On some cabs, you can delete this and work around it (this worked for PocketBreeze and PocketWeather, didn't work for iLauncher). I used this trick and put these two cabs in extended ROM.
I was going to wait for the new Faria WM6 V3 ROM to do some more testing, but since there's interest, I'll try out a test regarding the LOCK tonite. I have verified the other stuff works (the autorun registry changes via a cabinet, running autorun on the storage card after the install), but do need to check that.
And congratulations on the ROM release! Looks like a very nice packaging job !
saeba said:
Yes, thought of that. To do it as part of the ROM install though, you need to edit the ROM itself (the OEMOPERATORS registry file in Faria's build) and rebuild the ROM.
But I'm thinking of a mechanism that will work with no changes to the base ROM. That way, can pick up any of these wonderful ROMs that are coming out, just install and do this customization separate.
Click to expand...
Click to collapse
You are looking at this too much!!!
You could just do as below!
Code:
[HKEY_LOCAL_MACHINE\Comm]
"AutoRun"="\\Storage Card\\cabs\\autorun.exe"
"AutoRunCFG"="\\Storage Card\\cabs\\config.txt"
"AutoRunType"=dword:00000000
"TurnRadioFlag"=dword:00000000
Then in the config :-
Code:
CAB: \Storage Card\cabs\example.cab
But you dod have a problem of it freezing if you take out the card!
OK. We're mostly on the same page then. As you mentioned, I created a small cab file that sets:
[HKEY_LOCAL_MACHINE\Comm]
"AutoRun"="\\Storage Card\\cabs\\autorun.exe"
"AutoRunCFG"="\\Storage Card\\cabs\\config.txt"
I then just manually select/run autorun.exe against my custom config.txt.
When autorun.exe runs as part of the initial rom run, it locks out input so any cabinets that prompt for input breaks the execution. We're just wondering if it could work without the lock so that any cabinet (other than those that restart the system) could be executed in this manner. I have a handful of cabinets that do prompt for input that cause problems !
saeba said:
OK. We're mostly on the same page then. As you mentioned, I created a small cab file that sets:
[HKEY_LOCAL_MACHINE\Comm]
"AutoRun"="\\Storage Card\\cabs\\autorun.exe"
"AutoRunCFG"="\\Storage Card\\cabs\\config.txt"
I then just manually select/run autorun.exe against my custom config.txt.
When autorun.exe runs as part of the initial rom run, it locks out input so any cabinets that prompt for input breaks the execution. We're just wondering if it could work without the lock so that any cabinet (other than those that restart the system) could be executed in this manner. I have a handful of cabinets that do prompt for input that cause problems !
Click to expand...
Click to collapse
Ya if you dont have LOCK in your config, it still will work!
funman said:
Ya if you dont have LOCK in your config, it still will work!
Click to expand...
Click to collapse
Yes it does, but even if you remove the lock, you still can't respond to the prompt from the running cabinet. It just hangs the AutoRun process :-(. I just finished running a test to check this out.
This still goes a long way in helping automate my setup. I currently have about 26 cab files that I use to "customize" my system. 5 of those prompt for input and 2 more restart the system. So, I could automate the execution of 19 of them. I can use your "delete setup dll" trick and get 4 more to automate. So that means 23 of 26 could be automated !
Thanks!
saeba said:
I currently have about 26 cab files that I use to "customize" my system. 5 of those prompt for input and 2 more restart the system. So, I could automate the execution of 19 of them. I can use your "delete setup dll" trick and get 4 more to automate. So that means 23 of 26 could be automated !
Click to expand...
Click to collapse
You don't necessarily have to restart the phone after installing every cab that asks for it. Most just need the restart to work properly, but your not going to use them yet, because you are still installing all of your programs, so the restart can wait. Personally, I just cancel the restart notice and finish installing all of my cab before a singal restart for all of the cabs installed.
Ron
lokmeup said:
You don't necessarily have to restart the phone after installing every cab that asks for it. Most just need the restart to work properly, but your not going to use them yet, because you are still installing all of your programs, so the restart can wait. Personally, I just cancel the restart notice and finish installing all of my cab before a singal restart for all of the cabs installed.
Ron
Click to expand...
Click to collapse
I will have to find it, but there is a reg key that i chnaged that you can set it so you would need a reset after different cabs, but you can turn it off too!!! Cus i always got a prblem when trying to install my GPRS cab as it would say that it needed to restart, but now it does not say it!!! I will have to go back over reg keys i have chnaged and see if i can work it out again!
saeba said:
Yes it does, but even if you remove the lock, you still can't respond to the prompt from the running cabinet. It just hangs the AutoRun process :-(. I just finished running a test to check this out.
This still goes a long way in helping automate my setup. I currently have about 26 cab files that I use to "customize" my system. 5 of those prompt for input and 2 more restart the system. So, I could automate the execution of 19 of them. I can use your "delete setup dll" trick and get 4 more to automate. So that means 23 of 26 could be automated !
Thanks!
Click to expand...
Click to collapse
Just a thought but try taking the line of that says the background, i was thinking that if it does not have that in the process will it let you see the input window that comes up, if it does maybe it lets you press the buttons too!
I make this tool for quickly rotion display in Tornado, it's a part of my cooked ROM.
- Press comm button for rotation and restore. Can set default rotation in settings
- Setting tool is smaller and quickly
Thank all in this thread:
http://forum.xda-developers.com/showthread.php?t=318178
Thank to kartam
Please install sdkcerts.cab or WMtequan.cab first.
nncuong said:
I make this tool for quickly rotion display in Tornado, it's a part of my cooked ROM.
- Press comm button for rotation and restore. Can set default rotation in settings
- Setting tool is smaller and quickly
Thank all in this thread:
http://forum.xda-developers.com/showthread.php?t=318178
Thank to kartam
Please install sdkcerts.cab or WMtequan.cab first.
Click to expand...
Click to collapse
Why dont you post your cooked ROM here too. Is it English or Vietnamese?
Thanks
p/s
I installed the sdkcerts followed with this cab. I get the response "Sorry, your current display driver doesnt support this display mode!"
What's wrong?
thanks
Change driver from ddi.dll to ddivox.dll, It'll support rotation.
My cooked ROM have Vietnamese font only. It has based on shark's rom and has Landscape background (which is removed in orther rom)
nncuong said:
Change driver from ddi.dll to ddivox.dll, It'll support rotation.
My cooked ROM have Vietnamese font only. It has based on shark's rom and has Landscape background (which is removed in orther rom)
Click to expand...
Click to collapse
Yes! I changed it to the ddivox.dll. It responded with a soft reset. Now my phone is dead at the splash screen. I am now re-flashing the ROM. ahhhhhh.....
BTW does your pBAR support Tornado?
Thanks
Hello, i have same problem and i resolve to change the driver to ddivox.dll but in this program the action change joystick in Landscape is grey and in Landscpae mode the joystick no change direction.
What's rong ?
thanks
ps : sorry for my english
LOL, we should have fixed the joystick orientation and screen refresh issue before releasing a new tool. Anyway, good job there.
I wish to remind all of u, if u use vox dll, the screen will not refresh itself, unless u press a button. As in, if your phone goes idle at 5pm, it will show 5pm even at 12am, till u press a button to refresh the screen
karhoe said:
LOL, we should have fixed the joystick orientation and screen refresh issue before releasing a new tool. Anyway, good job there.
I wish to remind all of u, if u use vox dll, the screen will not refresh itself, unless u press a button. As in, if your phone goes idle at 5pm, it will show 5pm even at 12am, till u press a button to refresh the screen
Click to expand...
Click to collapse
Thanks Buddy. I had to reinstall the ROM.
illi said:
Thanks Buddy. I had to reinstall the ROM.
Click to expand...
Click to collapse
Hey illi... Thanks for being the guinea pig on this one! Saved me from crashing my phone! I love testers!
bipinsen said:
Hey illi... Thanks for being the guinea pig on this one! Saved me from crashing my phone! I love testers!
Click to expand...
Click to collapse
You're welcome. Glad you appreciate my guinea pigging that #*$ software. Consoled me though.
Still not finished tweaking my registry and its passed 2 am here.
illi said:
You're welcome. Glad you appreciate my guinea pigging that #*$ software. Consoled me though.
Still not finished tweaking my registry and its passed 2 am here.
Click to expand...
Click to collapse
That's exactly my gripe with trying out new ROMs too. Getting the registry back to it's optimal condition takes longer than anything else in the process. I've gone to using Sprite to do a backup when trying out new software. Problem? Hard reset => run backup => back as new!
bipinsen said:
That's exactly my gripe with trying out new ROMs too. Getting the registry back to it's optimal condition takes longer than anything else in the process. I've gone to using Sprite to do a backup when trying out new software. Problem? Hard reset => run backup => back as new!
Click to expand...
Click to collapse
Yep, I second that - I have tried varius backup programs before, but they were very limited in case of restoring system databases, or locked files. I have bought Sprite Backup, and I can backup - change ROM - restore - continue working in 15 minutes, leaving everything in!
XXX
Never use this software...!!!!!
it makes my 577w crashed
i can't start enter the windows now
Obviously you did not install the sdk or wntenquan as instructed. . .
Its your own fault
yep, smth wrong with your hands.dll or maybe even brain.dll... update them
followed all directions and it work like a charm for me ^^ very impressive app mate good job A+++
Guys please post step by step guide for the installation process. Many people wanna try it but the fear of crash is high enough to wait more
heres a little guide for ya guys:
step 1:download this and this
step 2;instal them on your phone or card wich ever you like
step 3:download the rotation display tool on the first post
step 4: install it
step 5: after installing both certificates and the rotation tool execute the "display manager" app on your phone then go to menu/change driver and select the "vox display driver(experimental)" after that the phone will reboot and then after the reboot, execute the "display manager" app again and select the orientation of your choice and thats it it should work 100% i did this on my tornado and it work first try.
hope it helps guys
rafyvitto said:
heres a little guide for ya guys:
step 1:download this and this
step 2;instal them on your phone or card wich ever you like
step 3:download the rotation display tool on the first post
step 4: install it
step 5: after installing both certificates and the rotation tool execute the "display manager" app on your phone then go to menu/change driver and select the "vox display driver(experimental)" after that the phone will reboot and then after the reboot, execute the "display manager" app again and select the orientation of your choice and thats it it should work 100% i did this on my tornado and it work first try.
hope it helps guys
Click to expand...
Click to collapse
Thank you will try
Could someone please add WMtequan.cab into my TDM or nncuong's pRot so that no more people would need to HR if they forgot. I must say that I myself had to hard reset lately because I forgot to install the WMtequan.
Sadly, it doesnt fix the screen refresh issue, so its annoying especially when I want to know he call duration or the time
I have a problem with Quick GPS: It doesn´t update (I tried activesync, Wifi, 3G,...): "Connection error. Try again later"
any solution?
Thanks
Carolan said:
I have a problem with Quick GPS: It doesn´t update (I tried activesync, Wifi, 3G,...): "Connection error. Try again later"
any solution?
Thanks
Click to expand...
Click to collapse
The same for me!!!! (since a few days)
I'm waiting for a solution too....
THX
Solution that worked for me
You can load and run again the original cab attached here.
You can do it from your sd but remember to install it on the device. Soft reset and ...done!
milpap said:
You can load and run again the original cab attached here.
You can do it from your sd but remember to install it on the device. Soft reset and ...done!
Click to expand...
Click to collapse
Thanks for the tips. Unfortunately I can't install this Cab on my Polaris because the system inform me that this application isn't signed.
Any tips to bypass this problem ?
Thanks in advance
Try to install it when Polaris is not connected with pc.
milpap said:
Try to install it when Polaris is not connected with pc.
Click to expand...
Click to collapse
It is exactly what I've do (before reading your answer ;-) ).
It run perfectly (after a restart of the Polaris).
Thanks for the tip!
Unbelievable milpap!!!
It's work for me too...!!!
I have killed the process just before installing the cab, soft reset, and it's working now!
But where was the problem???
From Spain, thank you very much !!!, milpap
Works for me too
Fix using Registry
[HKEY_LOCAL_MACHINE\Software\HTC\QuickGPS]
"RemindTime"="02151010034724"
"Bias"=dword:fffffed4
"ExpiredTime"=dword:00002760
"folder"="\Windows\"
"region"="GB"
"INIDate"="20060531"
"remind"=dword:00000001
"actSync"=dword:00000001
"auto"=dword:00000000
"NotifyID"=dword:00001960
"INIFile"=""
"path"=""
"EEFile"="xtra.bin"
"curRegion"=dword:00000000
"curIP"=dword:00000000
"pwd"="1"
"authname"="1"
These registry settings will also correct the issue...
thanks
It worked, thank you very much!!!!!
Now workin`
Hey Guys!
After i read the post and updatetd my xda the QuickGPS Update runs like never before!
The O2 Germany Support was unable to fix my prob, so thanks to the Forum!!
Quick GPS
Same problem here, it works again, thanks!
Am i special?
Hey Guys...
I updateted the htc_quickgps.cab and restartet my device.
After one day the update ended with the old errormessage.
I dont know the reason, does anybody else?
best regards
Frank
btw:
I cant see any difference in the reg.-settings so i dont change anything
Quick GPS
Thanks a lot! I had the same problem and this solved it.
Hi,
I also had major problems with my QuickGPS (using a Polaris, which seems to be a little special in this concern).
After many days of research and finally a lucky hit at htc customer support I can tell you this:
You have to install some sort of navigation software, install a map, activate and soft reset before using quick gps the first time. if you dont, you screw up the registry and will always have problems with qgps!!
maybe some hints are helpful (they werren't for me), but I would not want to reinstall or change registry settings all the time.
Reason: The navigation software sets up qgps for its needs. qgps seems to be by far more than a simple download manager for ephemeris data. if you dont have a working navigation software, quick gps will start going wild
In case you will have problems later on: try uninstalling tomtom - soft reset - installl - soft reset and press thumbs
maybe a regular backup can help as well, we will see.
Wish you best of luck...
Thanks for cab, it works for me too !!
Mulb
Only Bepe 0.67 fixed it for me
Hey Guys!
I flashed my Device with Bepes 0.67 and now the update is running witout any problems.
Once again thxs to bepe!
Frank
There's a very easy fix which works for me. I see this problem from time to time on my device too. I am still unable to trace the "bad" software which replaces this registry key!
Just import the attached registry file every time you see the problem is back
Dmitry N said:
There's a very easy fix which works for me. I see this problem from time to time on my device too. I am still unable to trace the "bad" software which replaces this registry key!
Just import the attached registry file every time you see the problem is back
Click to expand...
Click to collapse
Thank you so much for this registery file...My problem was its update was only good for 1 day & 21 hours...It seemed strange to me & believe me I've tried everything & still didn't work right...Now with this registery file, update is good for 6 days....
at me this mistake. he managed to repair it. I say thank you for it
I thought it would be a good idea to start a central place for all manila related hacks\edits. I'll post all my Leo Hack\edits here, but others are welcome to do the same. The will be included in the first (few) post(s). I'll post them all in the in the public Leo shared folder, to which we can all upload.
G-Alarm from home tab
GAlarm.exe must be located here: \Program*** (language dependent)\ageye\G-Alarm\GAlarm.exe
Dutch:
- Download
WWE\French:
- Download
SWE:
- Download
Alarm Hack Home Tab
This is a script that let's you create your own alarm hack on th manila 2.5 home tab.
Supported alarm applications:
- G-Alarm
- SPB Time
- Klaxon
Changelog:
v1.1
- Made it foolproof by adding various checks
- Combined the 2.1 and 2.5 version to a single script
- Added choice.exe to the Tools folder since older versions of windows do not have this
v1.2
- Added support for CradleAlarm
v1.3
- Added simple logging
Guide:
When you double click the .cmd or launch from the command prompt it will:
- Ask for the version of your Sense (2.1 or 2.5) Leo = 2.5
- Ask for the name of your storage card (case sensitive) -> no card, hit ENTER
- Ask for the name of your "Program Files" folder (case sensitive) -> if you hit enter it will be name "Program Files" by default
- Ask for the name of the alarm application
- Ask if you would like to have a cab created or just the manila file (for cooking purposes)
- Create a cab called: "12aon Alarm Hack Home Tab.cab" which needs to be installed in main memory (where the manila files reside)
Alarm Hack Home Tab v1.3
Thanks 12aon !
G-Alarm from home tab > How could it be used on a french ROM ?
What do you need to create a cab for french ROM ?
DocteurN said:
Thanks 12aon !
G-Alarm from home tab > How could it be used on a french ROM ?
What do you need to create a cab for french ROM ?
Click to expand...
Click to collapse
the path where GAlarm.exe is located like:
WWE: (\Program Files\ageye\G-Alarm\GAlarm.exe)
12aon. Can I ask something. If we install G-Alarm, I'm guessing your CAB above will link into it from the alarm button on the home screen yes?
Great hack, thanks
Please note that G-Alarm must be installed in main memory to use it.
Seems like a neat little program, unfortunatly it doesn't work on the Swedish version since the path is \Program\ageye\G-Alarm\GAlarm.exe instead of the international version which have \Program Files\ageye\G-Alarm\GAlarm.exe
Good and useful app. Thanks.
WWE works on my French ROM
May it work also on other device than the Leo?
Humpe said:
Seems like a neat little program, unfortunatly it doesn't work on the Swedish version since the path is \Program\ageye\G-Alarm\GAlarm.exe instead of the international version which have \Program Files\ageye\G-Alarm\GAlarm.exe
Click to expand...
Click to collapse
I'll make one later on
arturobandini said:
Good and useful app. Thanks.
WWE works on my French ROM
May it work also on other device than the Leo?
Click to expand...
Click to collapse
Yup as long as its using 2.5 manila
So the French ROM has a "Program Files" folder?
12aon said:
I'll make one later on
Yup as long as its using 2.5 manila
So the French ROM has a "Program Files" folder?
Click to expand...
Click to collapse
Yes, the french ROM has a Program Files folder
Titek said:
Yes, the french ROM has a Program Files folder
Click to expand...
Click to collapse
I think he was asking how it's called in French
Would appear the fix goes bad when removing both the fix and G-Alarm 12aon. Got any ideas?
See here
I'd love it if there was a cab that would work for if GAlarm was on the storage card too. It should pose no problem to a man of your calibre
Storage Card\Program Files\ageye\G-Alarm\GAlarm.exe
Pretty please
madindehead said:
Would appear the fix goes bad when removing both the fix and G-Alarm 12aon. Got any ideas?
See here
Click to expand...
Click to collapse
To me that seems highly unlikely, as I edited the lua source code directly. Therefore uninstalling G-Alarm would be as likely to break the the shortcut without my fix as with my fix. I posted in the thread and we shall see,
12
chimpsinties said:
I'd love it if there was a cab that would work for if GAlarm was on the storage card too. It should pose no problem to a man of your calibre
Storage Card\Program Files\ageye\G-Alarm\GAlarm.exe
Pretty please
Click to expand...
Click to collapse
I was waiting for this request to be made, but alas. I'm cool with making edits for different languages, but to make edits as well for the storage cards with all the different languages and different names for different cards will only get confusing in my opinion. For now if you want this to work install it in main memory, your HD2 will be able to handle that,
12
madindehead said:
Would appear the fix goes bad when removing both the fix and G-Alarm 12aon. Got any ideas?
See here
Click to expand...
Click to collapse
This was my complaint, don't worry you just need to soft reset after uninstalling at it's fine
Wouldn't it be possible to make it either search the device for the galarm.exe or ask the user to point at their installation?
Just a thought
I like the idea of this tweak. I just can't be bothered reinstalling the app
I confirm in french ROM the path is also :
\Program Files\ageye\G-Alarm\GAlarm.exe
jamuk2004 said:
This was my complaint, don't worry you just need to soft reset after uninstalling at it's fine
Click to expand...
Click to collapse
I know it was your complaint. Was just flagging it up in the original thread. I thought maybe a soft reset would fix it.
I wasn't stealing your thread or anything. Was just making it known
chimpsinties said:
Wouldn't it be possible to make it either search the device for the galarm.exe or ask the user to point at their installation?
Just a thought
I like the idea of this tweak. I just can't be bothered reinstalling the app
Click to expand...
Click to collapse
Well than, ye shall not have this added functionality , you'll be bothered at at some point (when you start noticing that going to start menu is getting to be a pain)
jamuk2004 said:
This was my complaint, don't worry you just need to soft reset after uninstalling at it's fine
Click to expand...
Click to collapse
Always try the obvious, before starting a thread, dummy , now I you give me extra by creating an "ask without checking" thread. I'm will clean it up for you .
DocteurN said:
I confirm in french ROM the path is also :
\Program Files\ageye\G-Alarm\GAlarm.exe
Click to expand...
Click to collapse
Merci!
Because reinstalling a WinMo app takes forever chimp...
Just reinstall the program if you want it to work. It takes all of what, 5 mins to do.