hi all I have a htc tornado i have a wifi router in my house i use my wifi on my laptop.i have pc also in my house which does not have wifi connection on it so is there any way to use my Tornado's wifi to get connectivity on my Pc.Help required plese
im not sure, i think i tried a long time ago but not sure of the results. but you could always go buy a usb wifi adapter. they are very cheap. you could probably find one on craigslist for 10-20 bucks
I can't sure, But U can try the WiFiFoFum
Good luck!
Not got any usful answers yet plz help.........
There is no support like this yet. Since Activesync connection sharing only works with the GPRS connection on your phone. (You dial the dial up number on your PC which connects GPRS on your phone and your PC to Internet via GPRS)
Get a ethernet bridge or Asus router and use DD-WRT. I don't like how usb adapters work* when you can just simply use ethernet standard not relying non stardard drivers from manufacturers.
http://www.newegg.com/Product/Produ...0026&cm_re=asus_router-_-33-320-026-_-Product
* I had bad experiance with netgear because lack of support vista 64 bit then later windows 7 64bit
Related
hi mates i have a JASJAR which is obvious. and i have a wm6 rom installed on it. the problem is i have switched to many roms but some how i m facing the same problem in all . i have a wireless router cum modem with network authentication of WPA-PSK and encryption of TKIP. this modem is wired to my desktop and i use it wirelessly on my laptop. I even connect my SONY PSP to it wirelessly. the problem is whenever i try to connect my PPC wirelessly. it just dont work. it discovers the SSID of my router and everything. even the KEY is provided accurately.. it tries to connect for sometime and suddenly the connecting process drops to disconnected view.. i have no idea, y its not connecting.. can anyone let me know where m i goin wrong ? or provide proper steps to configure the wifi connection on my ppc so as i can browse internet and use the high speed of my connection on my ppc ? man this is really getting me annoyed as i been working on it for days already pleaaasee if anyone can help me out on this it be awesome
May be due to the wireless class...
May be due to the wireless class... i also have JASJAR and it only have wireless b, and most wireless modems are g. so the class doesn't match and as a result the connection can not be established... same thing happened to me... the options are to get the modem that support wireless IEXXXXb or get a wifi card for JASJAR as it only has built in b class. the card will support class g connections.... just google for the wifi card ( wifi SD card)...
hi, first post here.
i have an HTC Touch Cruise with the default factory rom and it has an internal wifi antenna... I'm trying to setup a wireless network with my neighbour but my PC doesn't have a wifi adapter (and i don't have the money for one right now), so i was wondering if it is possible to make the pda some sort of adapter for the pc to use via usb/bluetooth?
One of the first thing we'll do if it's possible is to crack the wep key cause he can't rembemer the password and a hard reset to the router doesn't erase it
can also anyone suggest some tools to do that job?
I was thinking of running these tools on the pc since the pda will only serve as some kind of NIC...
hope someone can help...
Edit: Forgot to mention that i also have a bluetooh adapter on the pc if that comes of any use
P.S: Great Forum btw
There's an internet sharing option in Windows Mobile 6. Connect to the wifi network using the cruise and configure the internet sharing options. Then connect the cruise to the PC via USB and the PC should be able to access the net via the cruise's wifi connection.
MeeMk said:
There's an internet sharing option in Windows Mobile 6. Connect to the wifi network using the cruise and configure the internet sharing options. Then connect the cruise to the PC via USB and the PC should be able to access the net via the cruise's wifi connection.
Click to expand...
Click to collapse
LOL Windows makes it easy for us!
MeeMk said:
There's an internet sharing option in Windows Mobile 6. Connect to the wifi network using the cruise and configure the internet sharing options. Then connect the cruise to the PC via USB and the PC should be able to access the net via the cruise's wifi connection.
Click to expand...
Click to collapse
i've been snoping around that part, but it asks me for a conection name in which is on <none> cause i don't have a connection configured... if i go to the connections part, i don't know what kind of connection to create as it asks me to create a VPN or an ISP connection...
how can i configure internet sharing propperly?
would i be able to crack the wep key on the pc that way? (cracking it on the pc via the pda)
1. The program you'ew looking for is WmWifiRouter 1.20, it enables you to use your phone as a WiFi -> USB adapter...
2. Ask your neigbour to use Cain on his pc... it can reveal what's written in the password boxes (if it's XP or older), reveal it in the WiFi connection settings on the pc... Whith this you won't need any WEP cracking... also he should be able to change the WEP key without the original... if he doesn't know the access code to the router that's THE problem, check the manual for default values, and try those first before attempting anything else...
3. For configuring a 3G/HSDPA/GPRS/EDGE connection you'll need a data plan from you mobile carrier... after that you can configure the connection on your PDA.
VPN stands for Virtual Private Networking (read Wiki for more info)
ISP stand for Internet Service Provider (this'll be the one you'll need)
gnick666 said:
1. The program you'ew looking for is WmWifiRouter 1.20, it enables you to use your phone as a WiFi -> USB adapter...
2. Ask your neigbour to use Cain on his pc... it can reveal what's written in the password boxes (if it's XP or older), reveal it in the WiFi connection settings on the pc... Whith this you won't need any WEP cracking... also he should be able to change the WEP key without the original... if he doesn't know the access code to the router that's THE problem, check the manual for default values, and try those first before attempting anything else...
3. For configuring a 3G/HSDPA/GPRS/EDGE connection you'll need a data plan from you mobile carrier... after that you can configure the connection on your PDA.
VPN stands for Virtual Private Networking (read Wiki for more info)
ISP stand for Internet Service Provider (this'll be the one you'll need)
Click to expand...
Click to collapse
From what i've read on this forums, WmWifiRouter is for routing my 3G/HSDPA/GPRS/EDGE to other phones via wifi, but correct me if i'm wrong lol.
what i want to do is basiclly have wifi on the pc using the pda's built in antenna...
Thanks for the tips on the router, we'll try that
i know what those acronyms mean i just don't know how to configure them for the internet sharing program...
The ICS only shares your mobile internet with one computer be it on USB or BT, it can't act as a wifi adapter... The WMWifiRouter uses the ICS, but with different settings, that can't be utilized manualy... you can create an Ad-Hoc network with some registry tuning, but that's about it.. no DHCP, no NAT, no WEP, nothing that makes it easy, and secure...
Also I mentioned a version number for WmWifiRouter... the leatest (1.20) supports the Wifi -> USB mode, so with this your PDA can act as a WiFi adapter.
Also these PDAs weren't ment to be used this way, so expect high-level battery drainage, you'll need atleast 2 USB ports to charge it while using WMWiFiRouter.
But you can download the trial from the site, and see for your self... you won't loose anything with trying...
gnick666 said:
The ICS only shares your mobile internet with one computer be it on USB or BT, it can't act as a wifi adapter... The WMWifiRouter uses the ICS, but with different settings, that can't be utilized manualy... you can create an Ad-Hoc network with some registry tuning, but that's about it.. no DHCP, no NAT, no WEP, nothing that makes it easy, and secure...
Also I mentioned a version number for WmWifiRouter... the leatest (1.20) supports the Wifi -> USB mode, so with this your PDA can act as a WiFi adapter.
Also these PDAs weren't ment to be used this way, so expect high-level battery drainage, you'll need atleast 2 USB ports to charge it while using WMWiFiRouter.
But you can download the trial from the site, and see for your self... you won't loose anything with trying...
Click to expand...
Click to collapse
Ok, i got the 1.20 trial on the pda and got it working in Wifi -> usb mode, but now how do i search wireless networks on the pc? i noticed it is detected as wired connection, not a wireless one...
You don't need to quote the previous reply...
The PC sees a wired connection... so? You thought that, you can use the windows Wireless Zero Config for searching? I guess you just found out that you can't...
The wireless connection is managed by your PDA, connect to a wireless network with you PDA after you set up the WiFi -> USB...
gnick is correct, I am actually using my phone at home as a Wifi Adapter with WMWifiRouter 1.25 and it works very well. And YES, you have to connect your Wifi on phone first, then connect phone to computer via USB and (in my case) Windows 7 does the rest... I believe Vista also. Not sure about XP, don't have an XP machine, well I do, but it's off sitting in the closet (in timeout for not behaving good.. hehe)
I can't seem to able to connect the HD2 to my MacBook Pro, other than as a external HD drive. Which is fine for exchanging files, an dI don't need Activesync or the Vista version. But I do want to use it as a modem. Either via Bluetooth, a cable or as Wif Router. And though I am usually quite handy with these kind of things, I can't get any of them to work. So hopefully someone has made it to work, and can let me know the tricks?
Same problem here, but I'm able to connect to my SD card. What I do is to put all the update file in to SD card and run it.
Hello,
You should find in the programs on your HD2 one called Wifi Router.
Running it, you will be able to choose a name for your network and choose the key (WEP only)
Than from your Mac by clicking on the Airport icon, you should see your newly created network under "Devices". Just connect to it with the WEP key you determined and there you go !
WifI router is a great application. Working fine on a MS machine (XP, Vista). But it;s not stable with my Macbook/Apple. It's hard to get an connection (even find it), and only connects for a short time. I have not been able to get one biy in to webbrowser or mail. It just disconnects and says no internet connection...
Sorry to hear that =(
Using it on 2 Macbooks without any issues (stable and fast connection)
Works fine for me sorry! Submit it to HTC see what they say...
Same problem here between my new HD2 and macbook pro... Unable to connect to internet using Bluetooth/USB connection. WiFi router connect but internet connection don't work. Any solution?
PS : sharing files via USB or bluetooth is possible.
Looks like it is something of the new generation Macbook. Before I bought the apple, i was able to test it in an apple shop. It worked (Wifi Router)! As I said: no USB connection, no BT connection and not via WiFi Router. However it does work as an external Harddisk. It should be the settings in the Macbook to make Wi-Fi Router work! It connects (now and again, but not stable) But no internet according to Safari (for you guys/girls whom still own a dinosaur: that's the browser..). Settings of Macbook Pro???
I'm currently trying to find a way.
There is a software called "USBModem" from Mobile Stream that allow Windows Mobile USB and bluetooth connexion for Mac users.
I'm working actually with support team (very reactive!) for HD2 to be compatible with this software.
Hope they will be abble to make something great
Unfortunately, Mobile Stream Team can't make anything for HD2<=>Mac USB connexion
If somebody has a solution...
I started the thread, may be I can end it. Strangely enough, outside of my home Wifi area, I can get the connection between HD2's Wifi router and my Macbook. At home, somehow my HD2 tries to contact at the same the home network, and therefore does not get a stable connection with my Apple. So it's great: outside it works, inside I have a network and no need for tethering...
Indeed a dream until someone special converts it into a reality.
Can HD2 connect to a USB Internet dongle (the ones that connect to notebooks via USB for accessing internet) and go online? If that can be made possible, HD2 will be able to connect on the go without using WIFI.
that would be AWESOME
yahya.hamid said:
Indeed a dream until someone special converts it into a reality.
Can HD2 connect to a USB Internet dongle (the ones that connect to notebooks via USB for accessing internet) and go online? If that can be made possible, HD2 will be able to connect on the go without using WIFI.
that would be AWESOME
Click to expand...
Click to collapse
NOPE .. can't do it ..
if you are talking about wired usb dongle no ... HD2 does not support USB Host mode, so you cannot plug devices into the HD2, the HD2 is the device ...
Hmm..
It is possible to connect HTC to other devices via bluetooth. I am sure the host capabilities are there. The only thing is to instal the software and the right driver and it wud connect. I have an Internet USB dongle that connects to my service provider. It automatically instals software when it is plugged into a windows notebook.
Been wondering if that software can be modified to instal on Wm 6.5 and then with the right chip drivers access internet.
yahya.hamid said:
Hmm..
It is possible to connect HTC to other devices via bluetooth. I am sure the host capabilities are there. The only thing is to instal the software and the right driver and it wud connect. I have an Internet USB dongle that connects to my service provider. It automatically instals software when it is plugged into a windows notebook.
Been wondering if that software can be modified to instal on Wm 6.5 and then with the right chip drivers access internet.
Click to expand...
Click to collapse
That is bluetooth host, not usb host, to entirely different communication stacks .....
Besides, why run your battery down that much, to power a usb dongle, buy a wifi access point, usually cheaper than the usb dongle , connect via wifi ...
Why would you want to WIRE your wireless phone??
I would doubt a USB dongle is the only way to connect to your ISP , get a router with an access point ... easier on you easier on your phone ...
yahya.hamid said:
If that can be made possible, HD2 will be able to connect on the go without using WIFI.
Click to expand...
Click to collapse
I'm a bit puzzled as to what you would actually be gaining, if this were possible.
The HD2 is a phone, it contains a SIM, and if you have data service enabled, it can already connect on the go, without using WIFI.
I was just thinking the same thing?! lol
Check out this software, WM WIFI ROUTER 2.00 (build 1502) there is a trial for the software, and for complete use, buy license. should be cheap
options are 3G wireless, 3G usb dongle, 3G Bluetooth, outcoming & incoming wireless from laptop using usb to device vice-verser.
aoakes said:
Check out this software, WM WIFI ROUTER 2.00 (build 1502) there is a trial for the software, and for complete use, buy license. should be cheap
options are 3G wireless, 3G usb dongle, 3G Bluetooth, outcoming & incoming wireless from laptop using usb to device vice-verser.
Click to expand...
Click to collapse
cqan u post the link please?
aoakes said:
Check out this software, WM WIFI ROUTER 2.00 (build 1502) there is a trial for the software, and for complete use, buy license. should be cheap
options are 3G wireless, 3G usb dongle, 3G Bluetooth, outcoming & incoming wireless from laptop using usb to device vice-verser.
Click to expand...
Click to collapse
I think you missed his point, he wants to plug his ISP's usb dongle into his HD2 and then use his ISP's connection on the HD2 ...
The Wifi router app does not do that, it allows you to surf the web on your PC via the HD2 ...
I have a Sony xperia u and pc rumning on windows seven with pppoe connnection on it. I want to connect the.connection on pc to muy mobile usong wifI I dont have any wireleas routers or any WiFi card currently. All I want to know is what to buy and how to connect it with my mob:mobile.
The shsorter version of my question is
Can I acess my pc internet on my mobile using WiFi USB dongle and what are the other ways to browse internet on my mobile using WiFi?
Thank you
No, I don't think you can do it with a USB wifi dongle (more importantly, why would you get one if you don't even have a wireless router?).
You're going to have to get a router that serves as a client to your pppoe, which will share the connection to your PC and your phone. You can buy a router that supports DD-WRT or Tomato (there are lots of cheap options here). Or just buy one that supports that functionality out of the box.
yes of course!!
u can do that man..
just buy a usb wifi dongle..
and install connectify
that software will make ur laptop as a router, so u can share ur laptop internet connection to other device
search using google "Connectify 3.4 crack download"
thanks for the replies guys
bought asus rt n10